• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE J 1453/3 : 2012

Current
Current

The latest, up-to-date edition.

SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

29-06-2012

1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. REQUIREMENTS
5. TEST REQUIREMENTS AND QUALITY PROCEDURES
6. PACKAGING AND MARKING
7. NOTES
APPENDIX A - INSTRUCTIONS AND EXAMPLES FOR
             CALCULATING THE DIMENSIONS FOR SPECIAL
             SIZE (JUMP) CONNECTORS
APPENDIX B - REDUCTION FACTOR TABLES FOR JUMP FITTINGS
APPENDIX C - ASSEMBLY INSTRUCTIONS FOR
             ADJUSTABLE STYLE CONNECTORS IN
             STRAIGHT THREAD O-RING PORT
APPENDIX D - DIMENSIONS FOR JUMP SIZE CONNECTORS

Specifies material, dimensional, and performance requirements of steel O-ring face seal (ORFS) connectors for tubing and the O-ring face seal interface and nut portion of hose stem assemblies for nominal tube diameters of 6 mm through 50 mm.

DevelopmentNote
Supersedes SAE J 1453. (01/2009)
DocumentType
Revision
Pages
78
PublisherName
SAE International
Status
Current
Supersedes

MIL-DTL-32480-1 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32372-4 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
MIL-DTL-32480-5 Base Document:2014 Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MIL-DTL-32371-4 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch
MIL-DTL-32372-12 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
SAE J 846 : 2015 CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS
MIL-DTL-32480-6 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead
MIL-DTL-32372-8 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MIL-DTL-32372-9 Revision A:2017 Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MIL-DTL-32371-3 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow
MIL-DTL-32372-7 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MIL-DTL-32372-6 Revision A:2017 Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead
MIL-DTL-32371-6 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
MIL-DTL-32372-2 Revision A:2017 Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32480-7 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32371-9 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
MIL-DTL-32480-3 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-32372-11 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch
SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
MIL-DTL-32480-2 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
CSA B109 : 2017 NATURAL GAS FOR VEHICLES INSTALLATION CODE
MIL-DTL-32480-8 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32372-5 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MIL-DTL-32371-1 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight
SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
SAE J 2613 : 2017 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING
MIL-DTL-32372-1 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32371-8 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead
MIL-DTL-32480-9 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32371-5 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch
MIL-DTL-32371-7 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead
SAE J 516 : 2016 HYDRAULIC HOSE FITTINGS
MIL-DTL-32480-4 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MIL-DTL-32371-2 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
SAE J 2614 : 2018 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
SAE J 1926/2 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
MIL-DTL-32372-3 Revision A:2017 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32372-10 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch
SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
CSA NGV 6.1 : 2016 COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES

SAE J 846 : 2015 CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS
ISO 68-2:1998 ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads
ISO 5598:2008 Fluid power systems and components Vocabulary
SAE J 1453/2 : 2015 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
ISO 3305:1985 Plain end welded precision steel tubes — Technical conditions for delivery
SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
ISO 5864:1993 ISO inch screw threads Allowances and tolerances
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
SAE J 1453/1 : 2012 SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
ISO 3304:1985 Plain end seamless precision steel tubes — Technical conditions for delivery
SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
SAE J 1926/2 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS

View more information
£158.28
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.