• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE J 514 : 2012

Current

Current

The latest, up-to-date edition.

HYDRAULIC TUBE FITTINGS

Published date

06-01-2012

1. SCOPE
2. REFERENCES
3. GENERAL SPECIFICATIONS
4. PERFORMANCE REQUIREMENTS
5. SECTION 1 - 37 DEGREE FLARE TUBE FITTINGS
6. SECTION 2 - FLARELESS TUBE FITTINGS
7. SECTION 3 - O-RING PLUGS
8. SECTION 4 - HYDRAULIC PIPE FITTINGS
9. SECTION 5 - ADAPTER UNIONS
10. SECTION 6 - TABLES FOR CALCULATING
    DIMENSIONS ON SPECIAL SIZES
11. NOTES

Specifies complete general and dimensional specifications for 37 degree flared and flareless types of hydraulic tube fittings and O-ring plugs.

DevelopmentNote
Supersedes SAE J 368. (07/2004) Supersedes MS 51854 (C). (04/2005)
DocumentType
Standard
PublisherName
SAE International
Status
Current
Supersedes

MIL-DTL-32371-8 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead
MIL-DTL-32480-2 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32480-1 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MS51819 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51510 Revision D:2017 TEE, TUBE, 37 DEGREE FLARED
MS51525 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED
MIL-DTL-32480-5 Base Document:2014 Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MS51814 Revision E:1987 NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-4 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch
MS51519 Revision C:2017 NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED
MIL-DTL-32464-6 Base Document:2013 MALE ADAPTER, UNION CROSS, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
MIL-DTL-32464-1 Base Document:2013 MALE ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL-DTL-32464-12 Base Document:2013 MALE ADAPTER, TEE, 37 DEGREES SPHERICAL TO ANPT, ANPT ON BRANCH, 1500-3000 PSI
SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
MS39199 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING
MS51825 Revision H:2008 SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC
MS51811 Revision E:1987 TEE, TUBE, FLARELESS TYPE HYDRAULIC
MS51534 Revision A:1979 REDUCER, TUBE, 37 DEGREE FLARED
MIL-DTL-32480-6 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead
MS51501 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT
MS51521 Revision C:2017 ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED
MS51528 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED
MS51816 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-3 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow
BS ISO 8434-2:2007 Metallic tube connections for fluid power and general use 37° flared connectors
MIL-DTL-32371-6 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
MS51509 Revision D:2017 ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED
MS51524 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
MS51502 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG
MS39212 Revision K:2018 SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE
MS51514 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED
MS51503 Revision C:2016 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED
MS51532 Revision B:1988 FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
MIL-DTL-32480-7 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MS51520 Revision C:2017 NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED
SAE AS 4775 : 2017 AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
CSA B613 : 2000 : R2005 PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
MS51507 Revision D:2017 ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED
MS51508 Revision D:2017 ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED
MS51516 Revision C:2017 TEE, BULKHEAD ON RUN 37 DEGREE FLARED
MIL-DTL-32371-9 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run
SAE J 1273 : 2014 RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES
ISO 23551-8:2016 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls
SAE J 533 : 2017 FLARES FOR TUBING
SAE J 2606 : 2017 DRAIN AND FILL PLUG FOR USE ON ENGINES, TRANSMISSIONS, AND AXLES
ASTM F 1387 : 1999 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
DIN EN ISO 23553-1:2014-09 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
MIL-HDBK-2193 Base Document:1994 HYDRAULIC SYSTEM COMPONENTS, SHIP
MIL-C-52788 Revision B:1992 CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED
MIL-DTL-32464-7 Base Document:2013 MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL-DTL-32464-2 Base Document:2013 MALE ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL-DTL-32464-4 Base Document:2013 MALE ADAPTER, TEE, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI
SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
MIL-PRF-53024 Revision C:2012 COMPACTOR, HIGH SPEED, SELF-PROPELLED, COMMERCIAL CONSTRUCTION EQUIPMENT (CCE)
SAE J 2093 : 1999 DESIGN CONSIDERATIONS FOR WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE
BS DD195-1(1991) : 1991 HYDRAULIC COMPONENTS - METHOD OF TEST FOR COUPLING PORT THREADS AND THEIR SEALS INTENDED FOR USE IN FLUID POWER SYSTEMS
MIL-DTL-32464-8 Base Document:2013 MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
BS ISO 23551-10:2016 Safety and control devices for gas burners and gas-burning appliances. Particular requirements Vent valves
BS 7388:1991 Guide for prevention of leaks from hydraulic fluid power systems
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL-DTL-32464-10 Base Document:2013 MALE ADAPTER, LONG, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC TUBE, LONG HEX, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
SAE J 2435 : 2015 WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING
CSA B355 : 2015 LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
MIL-DTL-32464-5 Base Document:2013 MALE ADAPTER, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC, REGULAR HEX, 37 DEGREES SPHERICAL TO NPTF, 1500-3000 PSI
CGA 8.3 : 2015 THERMOPLASTIC HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS
CSA/ANSI Z21.15 : 2009 : INC : ADD A : 2009 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
ISO 23551-1:2012 Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements
SAE J 1231 : 2016 FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS
BS ISO 23551-8:2016 Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls
UNI ISO 8434-2 : 2012 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
ANSI B11.17 : 2004 : R2015 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
ANSI B11.17 : 2004 : R2009 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
CSA S826 SERIES : 2001 : R2006 FERRY BOARDING FACILITIES
CSA S826 SERIES : 2001 : R2016 FERRY BOARDING FACILITIES
ASME B31.3:2016 PROCESS PIPING
MIL-DTL-18866 Revision J:2015 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
MS39324 Revision C:2017 ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE
MS51842 Revision E:2017 ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC
CSA B613 : 2000 : INC : UPD 2 : 2002 : R2012 PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MS51531 Revision B:1985 NUT, TUBE COUPLING, 37 DEGREE FLARED
MS51512 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED
MS39322 Revision B:2017 ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH
MIL-DTL-32464-11 Base Document:2013 MALE ADAPTER, BULKHEAD, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ANSI B93.64M : 83(R1989) HYDRAULIC FLUID POWER-QUICK ACTION COUPLINGS (WITH PIPE THREAD OR SAE STRAIGHT THREAD CONNECTIONS) - METHOD OF MEASURING AND REPORTING PRESSURE DROP,
MS51533 Revision A:1979 SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED
MS51526 Revision A:1979 ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG)
SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
MS51530 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED
CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015 PILOT GAS FILTERS
SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
ANSI Z21.78 : 2010 : R2015 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
CGA 8.1 : 2015 ELASTOMERIC COMPOSITE HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS
CSA/ANSI Z21.15 : 2009 : INC : ADD B : 2013 : R2014 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
CSA Z267 : 2000 SAFETY CODE FOR AMUSEMENT RIDES AND DEVICES
BS ISO 23551-8:2016+A1:2019 Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls
ISO 23551-10:2016 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 10: Vent valves
ASTM F 1387 : 1999 : R2012 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ISO 23551-5:2014 Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 5: Manual gas valves
API 551 : 2016 PROCESS MEASUREMENT
UNE-EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
CSA 6.20 : 2010 : R2015 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
CSA 6.20 : 2010 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
CSA 9.1 : 2009 : INC : ADD B : 2013 : R2014 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
SAE J 2467 : 2020 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
CSA 9.1 : 2009 : INC : ADD A : 2012 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
CSA 9.1 : 2009 : INC : ADD B : 2013 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
CSA 9.1 : 2009 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
UNI EN ISO 23553-1 : 2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
MIL-DTL-52525 Revision F:2008 FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
CSA B109 : 2017 NATURAL GAS FOR VEHICLES INSTALLATION CODE
MIL-DTL-32480-8 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
A-A-59918 Revision B:2014 SELF PROPELLED CONCRETE SAW (SPCS)
MS51522 Revision C:2017 ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED
MIL-DTL-32464-3 Base Document:2013 MALE ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
SAE J 846 : 2015 CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS
MIL-DTL-32480-3 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
CSA B355S1 : 2002 SUPPLEMENT 1 TO CSA B355 - LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
MIL-DTL-32464-9 Base Document:2013 MALE ADAPTER, TEE, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON RUN, 1500-3000 PSI
SAE J 527 : 2017 BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING
MS51818 Revision E:1987 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC
ASTM F 1387 : 1999 : R2005 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
MIL-DTL-32371-1 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight
MS51841 Revision E:2017 TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC
SAE J 1926/1 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING
CSA/ANSI Z21.15 : 2009 : INC : ADD B : 2013 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
ANSI Z21.78 : 2010 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
CSA/ANSI Z21.15:2009 MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES
CSA B613 :2000 PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES
SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
SAE AS 4167 : 2016 WRENCHES; FLARE NUT, CROWFOOT, 12-POINT NON-DISTORTING
SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
I.S. EN ISO 23553-1:2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
SAE J 2613 : 2017 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
ASME A17.1-2016/CSA B44-16 Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
12/30250105 DC : 0 BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
ANSI B93.114M : 1987 PNEUMATIC FLUID POWER - SYSTEMS STANDARD FOR INDUSTRIAL MACHINERY
EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
MS51517 Revision C:2017 CROSS, TUBE, 37 DEGREE FLARED
SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
MIL-DTL-32480-9 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32371-5 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch
MIL-DTL-32371-7 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead
MS51500 Revision F:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED
SAE J 516 : 2016 HYDRAULIC HOSE FITTINGS
MS51505 Revision C:2016 ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED
MIL-DTL-32480-4 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MS51513 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED
MS51527 Revision D:2000 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared
MIL-DTL-32371-2 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
MS51506 Revision E:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED
SAE J 2614 : 2018 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
MS39323 Revision C:2017 FITTING, TUBE, REDUCER: 37 DEGREE FLARE
MS51815 Revision F:1987 ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51523 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED
MSS SP 133 : 2010 EXCESS FLOW VALVES FOR LOW PRESSURE FUEL GAS APPLIANCES
MS51812 Revision F:1987 NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC
MS51515 Revision D:2017 TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED
MS51817 Revision E:1987 ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51820 Revision E:1987 ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC
MS51518 Revision C:2017 PLUG, MACHINE THREAD, 37 DEGREE FLARED
MS51511 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED
MS51813 Revision E:1987 ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
CGA 6.8 : M95 ADDENDA B 2000 GAS FILTERS ON APPLIANCES
SAE MA 4360 : 2013 Metric Wrenches: 6 & 12 Point Flare Nut, Non-distorting
CSA 6.8 : 2005 PILOT GAS FILTERS
BS ISO 23551-5:2014 Safety and control devices for gas burners and gas-burning appliances Manual gas valves
MS51504 Revision C:2016 ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED
MS51529 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING
MIL-PRF-62410 Revision B:2011 TUBE ASSEMBLY METAL: SWAGED HYDRAULIC, (M1 TANK)
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
SAE J 1926/3 : 2016 CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS
SAE ARP 1247 : 2018 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS
SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
MIL-STD-777 Revision F:2012 SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
ASME A18.1 : 2017 SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS
CSA/ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME B31.3 SPANISH : 2010 PROCESS PIPING
CSA/ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
CSA/ANSI Z21.71:1993 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION

SAE J 405 : 1998 CHEMICAL COMPOSITIONS OF SAE WROUGHT STAINLESS STEELS
SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
SAE J 343 : 2016 TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES
SAE J 533 : 2017 FLARES FOR TUBING
SAE J 476 : 2013 DRYSEAL PIPE THREADS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.