VDMA 24408 : DRAFT 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE
Published date
24-08-2015
Superseded date
01-07-2016
Superseded by
Sorry this product is not available in your region.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Abgrenzung verfahrenstechnischer Anlagen
von der Europäischen Bauprodukteverordnung
5 Ergänzungen zur EN 13445 und EN 13480
Anhang A - Mechanische Eigenschaften der
verwendeten Werkstoffe
Literaturhinweise
Dieses VDMA-Einheitsblatt befasst sich mit den technischen Anforderungen an funktionale Einheiten und tragende Bauelemente in verfahrenstechnischen Anlagen, die in den harmonisierten Normen zur Druckgeräterichtlinie 2014/68/EU bislang nur ansatzweise beschrieben sind.
| DocumentType |
Draft
|
| PublisherName |
Verband Deutscher Maschinen- und Anlagenbau e.V.
|
| Status |
Superseded
|
| SupersededBy |
| EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| ISO 10042:2005 | Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
| ISO 14732:2013 | Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| EN 13084-7:2012 | Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| EN ISO 14732:2013 | Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure |
| EN 10095:1999 | Heat resisting steels and nickel alloys |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| KTA 3205.1 : 2002(R2007) | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 1: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| SEW 310 : 1992 | PHYSICAL PROPERTIES OF STEELS |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements |
| EN 13479:2017 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Summarise
Sorry this product is not available in your region.