(INACTIVE RECORD)IEEE C50.12 : 2005
Withdrawn
SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
01-01-2005
10-18-2023
1 Scope
2 Normative references
3 Definitions
Cooling classification
Coolant types
4 Operational requirements
4.1 Service conditions and steady-state duty
4.2 Transient event and emergency duty requirements
4.3 Service environment
5 Rating and performance characteristics
5.1 Output rating
5.2 Capability
5.3 Stator voltage rating
5.4 Power factor and reactive power capability
5.5 Rotor voltage ratings
5.6 Short-circuit ratio
5.7 Transient and subtransient reactances
5.8 Voltage wave shape
5.9 Torques
6 Insulation systems
6.1 Insulation systems defined
6.2 Classes of insulation systems
6.3 The use of different classes of insulation systems
7 Temperatures and temperature limits
7.1 Temperature limits
7.2 Methods of temperature determination
7.3 Locations of embedded temperature detectors
7.4 Location of coolant temperature detectors
8 Efficiency
8.1 Methods
8.2 Reference conditions
8.3 Types of losses
8.4 Test tolerance on losses
9 Tests
9.1 Categories and scope of tests
9.2 Test procedural requirements
9.3 Heat exchanger testing
9.4 Testing high-voltage terminal bushings
10 Marking
10.1 Nameplate
10.2 Other marking
10.3 Terminal markings
Annex A (informative) Bibliography
Annex B (normative) TIF weighting factors
Pertains to all types of 50 Hz and 60 Hz salient-pole synchronous generators and generator/motors rated 5 MVA and above to be used for hydraulic turbine or hydraulic pump/turbine applications.
| DevelopmentNote |
Supersedes IEEE DRAFT C50.12. (02/2006) Supersedes ANSI C50.12. (10/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| Supersedes |
| IEEE 1095-2012 REDLINE | IEEE Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
| IEEE 1665 : 2009 | GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE |
| IEEE 810-2015 | IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| IEEE DRAFT C37.102 : D8 2006 | AC GENERATOR PROTECTION |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 1547-2003 | IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems |
| IEEE 421.6-2017 | IEEE Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines |
| IEEE 1129-2014 | IEEE Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above) |
| IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
| IEEE C37.246-2017 | IEEE Guide for Protection Systems of Transmission-to-Generation Interconnections |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| ISO 7919-5:2005 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 5: Machine sets in hydraulic power generating and pumping plants |
| IEEE 1310-2012 REDLINE | IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Rotating Machines |
| ISO 3746:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
| IEEE 286-2000 | IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |