IEC TR 61597:1995
|
Overhead electrical conductors - Calculation methods for stranded bare conductors
|
ISO 12494:2017
|
Atmospheric icing of structures
|
EN 1998-6:2005
|
Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
|
EN 50189:2000
|
Conductors for overhead lines - Zinc coated steel wires
|
EN 60372:2004
|
Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
|
EN 12843 : 2004
|
PRECAST CONCRETE PRODUCTS - MASTS AND POLES
|
IEC TS 60479-1:2005+AMD1:2016 CSV
|
Effects of current on human beings and livestock - Part 1: Generalaspects
|
IEC 60826:2017
|
Design criteria of overhead transmission lines
|
EN 50326 : 2002
|
Conductors for overhead lines - Characteristics of greases
|
EN 61472:2013/AC:2015
|
LIVE WORKING - MINIMUM APPROACH DISTANCES FOR A.C SYSTEMS IN THE VOLTAGE RANGE 72,5 KV TO 800 KV - A METHOD OF CALCULATION (IEC 61472:2013)
|
EN 1991-1-6:2005/AC:2013
|
Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
|
IEC 60724:2000+AMD1:2008 CSV
|
Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV)
|
EN 14229:2010
|
Structural timber - Wood poles for overhead lines
|
EN 50397-1:2006
|
Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 1: Covered conductors
|
IEC 60050-601:1985
|
International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
|
EN 1993-1-5:2006/A1:2017
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS
|
IEC 60050-471:2007
|
International Electrotechnical Vocabulary (IEV) - Part 471: Insulators
|
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
|
EN 60794-4-10:2014
|
Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines
|
IEC 60050-441:1984
|
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
|
IEC TS 60815-2:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems
|
EN 60794-1-1:2016
|
Optical fibre cables - Part 1-1: Generic specification - General
|
EN 62004:2009
|
Thermal-resistant aluminium alloy wire for overhead line conductor
|
EN 62219:2002
|
Overhead electrical conductors - Formed wire, concentric lay, stranded conductors
|
EN 60433:1998
|
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type
|
EN 50183:2000
|
Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires
|
IEC 60720:1981
|
Characteristics of line post insulators
|
EN 60383-1:1996/A11:1999
|
INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
|
EN 60305:1996
|
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
|
EN 61325:1995
|
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
|
EN 1090-1:2009+A1:2011
|
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
|
IEC TR 60797:1984
|
Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric
|
EN 60507:2014
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
|
EN 61936-1 : 2010 AMD 1 2014
|
POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
|
EN 61466-1:2016
|
Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength classes and end fittings
|
EN 60889:1997
|
Hard-drawn aluminium wire for overhead line conductors
|
HD 474 : 200S1
|
DIMENSIONS OF BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS
|
EN 61854:1998
|
Overhead lines - Requirements and tests for spacers
|
CISPR TR 18-3:2017
|
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
IEC 60050-466:1990
|
International Electrotechnical Vocabulary (IEV) - Part 466: Overhead lines
|
EN 60437:1997
|
Radio interference test on high-voltage insulators
|
EN 60909-0:2016
|
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
|
EN 60865-1:2012
|
Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
|
EN 1997-2:2007/AC:2010
|
EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
|
EN 60071-1:2006/A1:2010
|
INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
|
IEC 60287-3-1:2017
|
Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions
|
EN 61897:1998
|
Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
|
EN 60794-1-2:2017/AC:2017-07
|
OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017)
|
EN ISO 2063:2005
|
Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
|
EN 50182:2001/AC:2013
|
CONDUCTORS FOR OVERHEAD LINES - ROUND WIRE CONCENTRIC LAY STRANDED CONDUCTORS
|
EN 1993-3-1:2006/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS
|
CISPR TR 18-2:2017
|
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits
|
EN 60652:2004
|
Loading tests on overhead line structures
|
EN 1993-1-3:2006/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING
|
EN 60071-2:1997
|
Insulation co-ordination - Part 2: Application guide
|
EN 60794-4:2003
|
Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines
|
EN 1995-1-1:2004/A2:2014
|
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
|
EN 1997-1:2004/A1:2013
|
EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
|
EN 61211:2005
|
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air
|
EN 61109:2008
|
Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
|
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
EN 61395:1998
|
Overhead electrical conductors - Creep test procedures for stranded conductors
|
EN 50522:2010
|
Earthing of power installations exceeding 1 kV a.c.
|
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN
|
EN 1991-1-4:2005/A1:2010
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
|
EN 1993-1-8:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
|
IEC TS 60815-1:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
|
EN 61232:1995/A11:2000
|
ALUMINIUM CLAD STEEL WIRES FOR ELECTRICAL PURPOSES
|
EN 61773:1996
|
Overhead lines - Testing of foundations for structures
|
EN 61952:2008
|
Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
|
IEC TR 60575:1977
|
Thermal-mechanical performance test and mechanical performance test on string insulator units
|
IEC TS 60815-3:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
|
EN ISO 14713 : 1999
|
PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES
|
EN 60383-2:1995
|
Insulators for overhead lines with a nominal voltage above 1 kV - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
|
EN 60038 : 2011
|
CENELEC STANDARD VOLTAGES (IEC 60038:2009, MODIFIED)
|
EN 1993-1-11:2006/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS
|
EN 1993-1-1:2005/A1:2014
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
|
EN 55016-1-1:2010/A2:2014
|
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014)
|
EN 61284:1997
|
Overhead lines - Requirements and tests for fittings
|
EN 61466-2:1998/A1:2002
|
COMPOSITE STRING INSULATOR UNITS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE GREATER THAN 1 KV - PART 2: DIMENSIONAL AND ELECTRICAL CHARACTERISTICS
|
EN 61467:2008
|
Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
|