BS EN 10216-5:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
Hardcopy , PDF
05-05-2021
English
12-31-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Classification and designation
6 Information to be supplied by the
purchaser
7 Manufacturing process
8 Requirements
9 Inspection
10 Sampling
11 Verification test methods
12 Marking
13 Handling and packaging
Annex A (informative) - Reference data of
strength values for creep rupture
of austenitic steels in the solution
annealed condition
Annex B (informative) - Technical changes from
the previous edition
Annex ZA (informative) - Clauses of this part
of EN 10216 addressing essential
safety requirements of the EU
Directive 97/23/EC
Bibliography
Describes the technical delivery conditions in two test categories for seamless tubes of circular cross section made of austenitic (including creep resisting steel) and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
Committee |
ISE/110
|
DevelopmentNote |
Supersedes BS 3605-1(1991) and 99/701077 DC. (10/2004)
|
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
UNE-EN 10216-5:2014 | Identical |
ONORM EN 10216-5 : 2014 | Identical |
NBN EN 10216-5 : 2014 | Identical |
NF EN 10216-5 : 2014 | Identical |
NEN EN 10216-5 : 2013 | Identical |
EN 10216-5:2013 | Identical |
UNI EN 10216-5 : 2014 | Identical |
SN EN 10216-5 : 2014 | Identical |
NS EN 10216-5 : 2013 | Identical |
I.S. EN 10216-5:2013 | Identical |
DIN EN 10216-5:2014-03 | Identical |
BS 8525-1:2010 | Greywater systems Code of practice |
13/30199128 DC : 0 | BS 6891 - SPECIFICATION FOR THE INSTALLATION AND MAINTENANCE OF LOW PRESSURE GAS INSTALLATION PIPEWORK OF UP TO 35 MM (R1[1/4]) IN PREMISES |
08/30171875 DC : DRAFT JUNE 2008 | BS 8515 - CODE OF PRACTICE FOR RAINWATER HARVESTING SYSTEMS |
BS 4825-1(1991) : 1991 | STAINLESS STEEL TUBES AND FITTINGS FOR THE FOOD INDUSTRY AND OTHER HYGIENIC APPLICATIONS - PART 1: SPECIFICATION FOR TUBES |
DEFSTAN 02-878/1(2011) : 2011 | NON-FERROUS TUBES AND PIPES FOR USE IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
16/30353337 DC : 0 | PD 5500:2015+A3 - SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 8515(2009) : 2009 | RAINWATER HARVESTING SYSTEMS - CODE OF PRACTICE |
BS PD5500(2015) : 2015 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2009) : 2009 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 6891:2015 | Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises |
BS 6180:2011 | Barriers in and about buildings. Code of practice |
BS PD5500(2018) : 2018 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS PD5500(2012) : 2012 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
BS 6891(2005) : 2005 | INSTALLATION OF LOW PRESSURE GAS PIPEWORK OF UP TO 35 MM (R1[1/4]) IN DOMESTIC PREMISES (2ND FAMILY GAS) - SPECIFICATION |
09/30184122 DC : 0 | BS 8525-1 - GREYWATER SYSTEMS - PART 1: CODE OF PRACTICE |
10/30212801 DC : 0 | BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
ISO 8496:2013 | Metallic materials Tube Ring tensile test |
EN ISO 8493 : 2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
EN ISO 8495:2013 | Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) |
ISO 10893-1:2011 | Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
EN ISO 8496:2013 | Metallic materials - Tube - Ring tensile test (ISO 8496:2013) |
ISO 10332:2010 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 10893-1:2011 | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) |
EN 10168:2004 | Steel products - Inspection documents - List of information and description |
ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN ISO 2566-2:1999 | Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
ISO 8495:2013 | Metallic materials Tube Ring-expanding test |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ISO 8492:2013 | Metallic materials Tube Flattening test |
ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN 10020:2000 | Definition and classification of grades of steel |
EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.