ISO/TR 11688-2:1998
Current
Current
The latest, up-to-date edition.
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
09-03-1998
DocumentType |
Technical Report
|
Pages |
46
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
NF EN ISO 11688-2 : 2004 | Identical |
NBN EN ISO 11688-2 : 2001 | Identical |
NEN EN ISO 11688-2 : 2001 | Identical |
NEN NPR ISO/TR 11688-2 : 1998 | Identical |
NS EN ISO 11688-2 : 1ED 2001 | Identical |
I.S. EN ISO 11688-2:2001 | Identical |
PN EN ISO 11688-2 : 2004 | Identical |
SN EN ISO 11688-2 : 2001 | Identical |
UNI EN ISO 11688-2 : 2002 | Identical |
SS-EN ISO 11688-2 : 2000 | Identical |
UNE-EN ISO 11688-2:2001 | Identical |
BS EN ISO 11688-2 : 2001 | Identical |
EN ISO 11688-2 : 2000 | Identical |
DIN 45685-2:1998-11 (Draft) | Identical |
DIN EN ISO 11688-2:2001-03 | Identical |
BS EN ISO/TR 11688-2:2001 | Identical |
DIN 45685-2:1998-11 (Draft) | Corresponds |
15/30299134 DC : 0 | BS EN ISO 5395-2:2013/A1 - GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS |
I.S. EN 16307-6:2014 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
14/30245659 DC : 0 | BS EN ISO 4254-14 - AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS |
PREN 16307-2 : DRAFT 2017 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE-REACH TRUCKS |
DIN EN 14753 E : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
UNI EN ISO 11148-2 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
PREN 12733 : DRAFT 2016 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
DIN EN 15059 E : 2015 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
12/30254912 DC : 0 | BS EN 690 - AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
BS EN 1870-19:2013 | Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws |
BS EN ISO 11148-11:2011 | Hand-held non-electric power tools. Safety requirements Nibblers and shears |
16/30333438 DC : 0 | BS ISO 20297-1 - INDUSTRIAL TRUCKS - LORRY-MOUNTED TRUCKS - PART 1: SAFETY REQUIREMENTS AND VERIFICATION |
BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
BS EN ISO 23771:2015 | Textile machinery. Guide to the design of textile machinery for reduction of the noise emissions |
S.R. CEN/TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
BS ISO 20474-1:2017 | Earth-moving machinery. Safety General requirements |
07/30158774 DC : 0 | BS EN 791 AMD1 - DRILL RIGS - SAFETY |
DIN EN ISO 11148-9:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
DIN EN 16486 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
DIN EN 16564 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
BS ISO 20297-1:2017 | Industrial trucks. Lorry-mounted trucks Safety requirements and verification |
09/30203677 DC : 0 | BS ISO 11681-2 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE |
12/30253910 DC : DRAFT JULY 2012 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
I.S. EN 15774:2010 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
PREN 1870-3 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
09/30206741 DC : 0 | BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS |
DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
BS EN ISO 11850 : 2011 | MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS |
DIN EN ISO 23771 E : 2015 | TEXTILE MACHINERY - GUIDE TO THE DESIGN OF TEXTILE MACHINERY FOR REDUCTION OF THE NOISE EMISSIONS (ISO 23771:2015) |
DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
UNE-EN 16851:2017 | Cranes - Light crane systems |
04/30123600 DC : DRAFT OCT 2004 | ISO 11681-2 - FORESTRY MACHINERY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE |
09/30203674 DC : 0 | BS ISO 11681-1 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE |
BS EN ISO 11148-10:2011 | Hand-held non-electric power tools. Safety requirements Compression power tools |
I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
15/30281554 DC : 0 | BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS |
ISO 13578:2017 | Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
BS EN 16252:2012 | Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
ISO 10517:2009 | Powered hand-held hedge trimmers Safety |
I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
DIN EN ISO 11850:2016-06 | Machinery for forestry - General safety requirements (ISO 11850:2011 + Amd 1:2016) (includes Amendment :2016) |
I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
17/30331349 DC : DRAFT MAY 2017 | BS EN ISO 28139 - EQUIPMENT FOR CROP PROTECTION - KNAPSACK COMBUSTION ENGINE-DRIVEN AIR-BLAST SPRAYERS - SAFETY AND ENVIRONMENTAL REQUIREMENTS AND TEST METHODS |
12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
BS ISO 10896-2:2016 | Rough-terrain trucks. Safety requirements and verification Slewing trucks |
10/30214890 DC : 0 | BS EN ISO 5395-3 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS |
08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
I.S. EN ISO 11806-1:2011 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11806-1:2011) |
13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
09/30202029 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
07/30163456 DC : 0 | BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN 14753:2007 | Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel |
10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
08/30177210 DC : DRAFT MAY 2008 | BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
I.S. EN ISO 11148-10:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS (ISO 11148-10:2011) |
UNI EN 12012-4 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
08/30173506 DC : DRAFT JAN 2008 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
DIN EN 1807-1:2013-06 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
I.S. EN ISO 11148-2:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS (ISO 11148-2:2011) |
DIN EN 15774:2011-10 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
DIN EN 14886 E : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
ISO 20297-1:2017 | Industrial trucks — Lorry-mounted trucks — Part 1: Safety requirements and verification |
EN 703:2004+A1:2009 | Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety |
DIN EN 16486:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
I.S. EN 12649:2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
ISO 18758-2:2018 | Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements |
I.S. EN ISO 23771:2015 | TEXTILE MACHINERY - GUIDE TO THE DESIGN OF TEXTILE MACHINERY FOR REDUCTION OF THE NOISE EMISSIONS (ISO 23771:2015) |
PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
I.S. EN ISO 18217:2015 | SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
I.S. EN 1807-2:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
ISO 11148-13:2017 | Hand-held non-electric power tools Safety requirements Part 13: Fastener driving tools |
I.S. EN ISO 11148-8:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS (ISO 11148-8:2011) |
I.S. EN ISO 16092-3:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 3: SAFETY REQUIREMENTS FOR HYDRAULIC PRESSES (ISO 16092-3:2017) |
I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
I.S. EN 1829-1:2010 | HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
BS EN 15059 : 2009 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
I.S. EN 13000:2010 | Cranes - Mobile cranes |
DIN EN ISO 5395-2:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013 + AMD 1:2016 + AMD 2:2017) |
ISO 19224:2017 | Continuous surface miners (CSM) — Safety requirements |
DIN EN 1459-2 E : 2016 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
UNE-EN 16307-1:2013 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
I.S. EN ISO 11850:2011 | MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011) |
BS EN 1459-1:2017 | Rough-terrain trucks. Safety requirements and verification Variable-reach trucks |
I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
UNE-EN 1459-1:2018 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
UNE-EN ISO 19085-1:2018 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
16/30314039 DC : 0 | BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
EN ISO 4254-1:2015 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
PREN 16770 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
DIN EN 14910 E : 2009 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
DIN EN ISO 11681-1:2012-05 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
DIN EN 14985 E : 2012 | CRANES - SLEWING JIB CRANES |
DIN EN 13525:2010-05 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
DIN EN 14238 E : 2010 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
DIN EN 1870-16:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
DIN EN 13019:2009-04 | Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008) |
DIN EN 500-1:2010-05 | Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009) |
DIN EN ISO 11680-1:2012-04 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
DIN EN 12653:2010-06 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009) |
DIN EN 13418:2013-08 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
DIN EN 792-7:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
DIN EN 1870-3:2015-02 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
I.S. EN 861:2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
BS EN 12203 : 2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
BS EN 14018 : 2005 | AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY |
BS EN ISO 19432:2012 | Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements |
BS EN 13457 : 2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
UNE-EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
BS EN 859 : 2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
BS EN 1870-16:2012 | Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting |
BS EN 13418:2013 | Plastics and rubber machines. Winding machines for film or sheet. Safety requirements |
BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
BS EN ISO 11690-2:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures |
BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
BS EN 614-1 : 2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
BS EN 12409 : 2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
BS EN ISO 4254-1:2015 | Agricultural machinery. Safety General requirements |
BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
BS EN 12387 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
I.S. EN 859:2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES |
BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
I.S. EN 13977:2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
I.S. EN ISO 11681-2:2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011) |
I.S. EN 14043:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
I.S. EN 1870-16:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
I.S. EN 14910:2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
EN 12203:2003+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
UNI EN 703 : 2010 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
EN 12012-4:2006+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
EN 16228-1:2014 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNE-EN 972:1999 | TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS. |
EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
EN 12653:1999+A2:2009 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
EN 13020:2015 | Road surface treatment machines - Safety requirements |
EN 15997:2011/AC:2012 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
EN 12547:2014 | Centrifuges - Common safety requirements |
EN 13112:2002+A1:2009 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
EN 12336:2005+A1:2008 | Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
EN 13114:2002+A1:2009 | Tannery machines - Rotating process vessels - Safety requirements |
EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
EN 13021:2003+A1:2008 | Winter service machines - Safety requirements |
EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
EN 13113:2002+A1:2010 | Tannery machines - Roller coating machines - Safety requirements |
EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety |
EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
EN 12417:2001+A2:2009/AC:2010 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
15/30302620 DC : 0 | BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES |
DIN EN ISO 11148-11:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
DIN EN ISO 11148-12:2013-05 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
05/30105911 DC : DRAFT JUN 2005 | ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING |
BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
I.S. EN 16252:2012 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
14/30285286 DC : 0 | BS EN 14439 - CRANES - SAFETY - TOWER CRANES |
11/30254129 DC : 0 | BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
DIN EN 12012-1:2015-05 (Draft) | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
11/30237566 DC : 0 | BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
BS ISO 18564:2016 | Machinery for forestry. Noise test code |
UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
BS EN ISO 11148-1:2011 | Hand-held non-electric power tools. Safety requirements Assembly power tools for non-threaded mechanical fasteners |
08/30177207 DC : DRAFT MAY 2008 | BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
UNE-EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
UNI EN ISO 10517 : 2014 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
08/30178810 DC : DRAFT MAY 2008 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
UNI EN 1870-19 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
BS EN 15774:2010 | Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements |
UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
CSA M4254.1 : 2007 | AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNI EN ISO 11148-1 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
BS EN 1829-1:2010 | High pressure water jet machines. Safety requirements Machines |
BS EN ISO 11148-12:2012 | Hand-held non-electric power tools. Safety requirements Circular, oscillating and reciprocating saws |
09/30196820 DC : 0 | BS ISO 11850 - MACHINERY FOR FORESTRY - SELF-PROPELLED MACHINERY - SAFETY REQUIREMENTS |
17/30341100 DC : 0 | BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS |
DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
15/30299138 DC : 0 | BS EN ISO 5395-3:2013/A1 - GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR |
16/30322398 DC : 0 | BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS |
I.S. EN 792-9:2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
BS EN ISO 11806-1:2011 | Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Machines fitted with an integral combustion engine |
08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
DIN EN 1807-2:2013-06 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
UNI EN 16228-1 : 2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
DD ISO/TS 3691-7:2011 | Industrial trucks. Safety requirements and verification Regional requirements for countries within the European Community |
12/30255086 DC : 0 | BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
07/30142135 DC : 0 | BS EN 1012-1 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
BS EN ISO 11148-5:2011 | Hand-held non-electric power tools. Safety requirements Rotary percussive drills |
15/30295265 DC : 0 | BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
UNI EN ISO 10821 : 2010 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
11/30235009 DC : 0 | BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
UNI EN ISO 11148-5 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
16/30277014 DC : DRAFT MAR 2016 | BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNI EN ISO 11148-6 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS |
PREN 12012-1 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
12/30246642 DC : 0 | BS EN 16307-1 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
08/30177213 DC : DRAFT JUNE 2008 | BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
14/30279098 DC : 0 | BS ISO 18564 - MACHINERY FOR FORESTRY - NOISE TEST CODE |
12/30270038 DC : 0 | BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
DIN EN 1829-1:2010-05 | High pressure water jet machines - Safety requirements - Part 1: Machines |
BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
BS EN 16486:2014 | Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
09/30187371 DC : 0 | BS ISO 11148-1 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS |
09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
PREN 690 : DRAFT 2012 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
09/30183457 DC : 0 | BS EN 13020:2004/A1 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
15/30294711 DC : DRAFT MAY 2015 | BS EN ISO 4254-8 - AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS |
I.S. EN 16486:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
ISO 18564:2016 | Machinery for forestry Noise test code |
DIN EN 16307-6:2014-07 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
BS ISO 4254-8:2009 | Agricultural machinery. Safety Solid fertilizer distributors |
ISO 19085-1:2017 | Woodworking machines Safety Part 1: Common requirements |
UNI EN 16252 : 2013 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
UNI EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
DIN EN ISO 18217 E : 2015 | SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
DIN EN ISO 11148-8:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN 12999:2011 | CRANES - LOADER CRANES |
I.S. EN ISO 4254-14:2016 | AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS (ISO 4254-14:2016) |
BS EN 16307-1 : 2013 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
BS EN ISO 5395-3 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013) |
I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
ISO 10896-2:2016 | Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks |
I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
DIN EN 12999:2013-02 | CRANES - LOADER CRANES |
EN 12999:2011+A2:2018 | Cranes - Loader cranes |
EN ISO 16092-3:2018 | Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) |
UNI EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
PREN 289 : DRAFT 2012 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 12012-1 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
ISO 20966:2007 | Automatic milking installations — Requirements and testing |
I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
DIN EN 12387:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009) |
DIN EN 13114:2010-03 | Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009) |
DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
DIN EN 13021:2009-04 | Winter service machines - Safety requirements (includes Amendment A1:2008) |
DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
DIN EN 12203:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009 |
DIN EN 13112:2011-03 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009) |
DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
DIN EN 12301:2015-12 (Draft) | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
DIN EN ISO 4254-1:2016-09 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
DIN EN 1417:2015-03 | Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014 |
DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
DIN EN 15027 E : 2010 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
DIN EN 792-8:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
DIN EN 12159:2013-03 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
DIN EN 12001:2012-11 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
DIN EN 14466:2008-09 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
DIN EN 15027:2010-03 | Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009) |
DIN EN 14439:2010-03 | Cranes - Safety - Tower cranes (includes Amendment A2:2009) |
DIN EN 14910:2009-08 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
DIN EN 14238:2010-02 | Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009) |
DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
BS EN 792-8 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
BS EN 14238 : 2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
BS EN 13524 : 2003 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
UNE-EN ISO 11680-1:2012 | Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
BS EN ISO 11680-1:2011 | Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners Machines fitted with an integral combustion engine |
BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
ISO 11806-1:2011 | Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 1: Machines fitted with an integral combustion engine |
BS EN 12653 : 2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
UNE-EN 13020:2016 | Road surface treatment machines - Safety requirements |
UNE-EN 12547:2015 | Centrifuges - Common safety requirements |
UNE-EN 13418:2013 | Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
I.S. EN 13524:2003 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
I.S. EN 13114:2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
I.S. EN 12203:2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
I.S. EN ISO 19432:2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
I.S. EN 13113:2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 690:2013 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
EN 16851:2017 | Cranes - Light crane systems |
I.S. EN ISO 11680-1:2011 | MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLEMOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE (ISO 11680-1:2011) |
I.S. EN 14439:2006 | CRANES - SAFETY - TOWER CRANES |
I.S. EN 14238:2004 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
DIN EN 13524:2003-10 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
EN 13524:2003+A2:2014 | Highway maintenance machines - Safety requirements |
I.S. EN ISO 11681-1:2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE (ISO 11681-1:2011) |
I.S. EN 1870-3:2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
I.S. EN 614-1:2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
I.S. EN 12750:2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
DIN EN 792-7:2002-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
DIN EN ISO 10517:2014-03 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013) |
I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
I.S. EN 13418:2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
I.S. EN 1114-1:2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
I.S. EN 1870-17:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
I.S. EN 1915-4:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
I.S. EN 1870-14:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
I.S. EN 500-1:2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
I.S. EN 930:1998 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 474-12:2006 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
I.S. EN 703:2004 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
I.S. EN 1539:2015 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
I.S. EN 931:1998 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 201:2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
DIN EN 1539:2016-02 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
I.S. EN 12653:2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 15027:2007 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
I.S. EN 14018:2005 | AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY |
EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
I.S. EN 13019:2001 | MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
DIN EN 792-9:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
I.S. EN 14044:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
I.S. EN 1417:2014 | PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS |
DIN EN 792-8:2001-08 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
I.S. EN 12547:2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
DIN EN ISO 10821:2013-02 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009) |
I.S. EN ISO 4254-1:2015 | AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013) |
I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
I.S. EN 13112:2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 972:1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
I.S. EN 12001:2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
I.S. EN 12387:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
I.S. EN 13021:2003 | WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 1953:2013 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
I.S. EN 13457:2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 1870-4:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
I.S. EN 13204:2016 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
I.S. EN 13020:2015 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
DIN EN 12336:2010-03 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
DIN EN ISO 16093:2017-10 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
UNI EN 13114 : 2010 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
UNI EN 792-7 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
UNI EN 12387 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS |
I.S. EN 14017:2005 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
DIN EN ISO 11148-3:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
DIN EN ISO 11148-2:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
DIN EN 16474 E : 2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
PREN 50223 : DRAFT 2013 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
DIN EN 16252:2013-03 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
BS EN ISO 11148-2:2011 | Hand-held non-electric power tools. Safety requirements Cutting-off and crimping power tools |
BS EN ISO 11148-3:2012 | Hand-held non-electric power tools. Safety requirements Drills and tappers |
11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
DIN EN ISO 18217:2015-12 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
09/30196811 DC : 0 | BS ISO 11680-1 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
08/30183566 DC : DRAFT JUNE 2008 | BS ISO 11148-3 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
16/30318928 DC : 0 | BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES |
DIN EN ISO 4254-10:2011-07 | Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) (includes Corrigendum AC:2010) |
09/30187383 DC : 0 | BS ISO 11148-11 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
15/30296744 DC : 0 | BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
BS EN 1870-18:2013 | Safety of woodworking machines. Circular sawing machines Dimension saws |
10/30232428 DC : DRAFT DEC 2010 | BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
14/30272245 DC : 0 | BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
DIN EN 1870-19 E : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
12/30253907 DC : DRAFT JULY 2012 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
BS EN 12999 : 2011 | CRANES - LOADER CRANES |
10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
BS EN 1807-2:2013 | Safety of woodworking machines. Band sawing machines Log sawing machines |
05/30140648 DC : DRAFT OCT 2005 | ISO 8437 - SNOWTHROWERS - SAFETY REQUIREMENTS AND TEST PROCEDURES |
BS EN 15572:2015 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines |
10/30232431 DC : DRAFT DEC 2010 | BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
I.S. EN 1459-1:2017 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: VARIABLE-REACH TRUCKS |
DIN EN 15059:2015-06 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
PREN 13204 : DRAFT 2015 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
DIN EN ISO 16093:2014-03 (Draft) | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
UNI EN ISO 11148-12 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
13/30266497 DC : 0 | BS EN ISO 23771 - DESIGN MEASURES FOR REDUCTION OF THE NOISE EMISSIONS FROM TEXTILE MACHINERY |
04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
I.S. EN 16307-1:2013 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 1: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED INDUSTRIAL TRUCKS, OTHER THAN DRIVERLESS TRUCKS, VARIABLE-REACH TRUCKS AND BURDEN-CARRIER TRUCKS |
DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
UNI EN ISO 11148-8 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
08/30156074 DC : DRAFT APR 2008 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
08/30174113 DC : DRAFT AUG 2008 | BS EN 1915-4 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
BS EN ISO 5395-2 : 2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS |
UNI EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
DIN EN 16228-1:2014-10 | Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014 |
BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
UNI EN ISO 4254-10 : 2010 | AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES |
PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
ISO 16092-1:2017 | Machine tools safety — Presses — Part 1: General safety requirements |
UNE-EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
UNE-EN ISO 11806-1:2012 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
17/30362886 DC : 0 | BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS |
PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
DIN EN 14753:2008-03 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
ISO 16092-3:2017 | Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses |
DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
I.S. EN 1807-1:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
UNI EN 1807-2 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
I.S. EN 1459-2:2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
I.S. EN 15572:2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
UNI EN ISO 11148-4 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS |
UNI EN ISO 11148-9 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
DIN EN 474-1:2014-03 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
I.S. EN ISO 11148-12:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS (ISO 11148-12:2012) |
EN ISO 10517:2009/A1:2013 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009/AMD 1:2013) |
I.S. EN 14753:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
UNE-EN ISO 4254-14:2016 | Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) |
I.S. EN 1870-18:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
ISO 4254-9:2008 | Agricultural machinery Safety Part 9: Seed drills |
I.S. EN ISO 11148-6:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
I.S. EN ISO 10517:2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009) |
I.S. EN ISO 16093:2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
UNE-EN 1829-1:2010 | High pressure water jet machines - Safety requirements - Part 1: Machines |
17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
UNE-EN 1459-2:2016 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
UNE-EN 1870-14:2008 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
PREN 12301 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
EN ISO 19085-1:2017/AC:2018 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
EN 1459-2:2015 | Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
EN ISO 5395-2:2013/A2:2017 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013/AMD 2:2017) |
DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
ISO 10896-1:2012 | Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks |
I.S. EN ISO 4254-10:2009 | AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES |
I.S. EN 12301:2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
ISO 20474-1:2017 | Earth-moving machinery — Safety — Part 1: General requirements |
DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
DIN EN 12750:2013-05 | Safety of woodworking machines - Four sided moulding machines |
DIN EN 1953:2013-12 | ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS |
DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
DIN EN 1870-17:2015-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
DIN EN 12547:2014-12 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
DIN EN 12649:2011-09 | Concrete compactors and smoothing machines - Safety |
DIN EN 1915-4:2009-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
DIN EN 13020:2016-02 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
DIN EN 13113:2011-05 | Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010) |
DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
DIN EN 703:2009-12 | Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety (includes Amendment A1:2009) |
DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
DIN EN ISO 19432 E : 2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
DIN EN 14017:2009-07 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
DIN EN 930:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009) |
DIN EN 14018:2010-02 | AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY |
DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
DIN EN 931:2010-07 | Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009) |
DIN EN 14466 E : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
DIN EN 848-2:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
BS EN 1417:2014 | Plastics and rubber machines. Two-roll mills. Safety requirements |
UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
BS EN 861 : 2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
BS EN ISO 11681-1:2011 | Machinery for forestry. Portable chain-saw safety requirements and testing Chain-saws for forest service |
ISO 11148-4:2012 | Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools |
BS EN 848-2 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
UNE-EN 13204:2017 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
BS EN 12649 : 2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
DIN EN ISO 11681-2:2017-10 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011 + Amd 1:2017) (includes Amendment A1:2017) |
UNI EN 13525 : 2010 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
EN 16307-1:2013+A1:2015 | Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
I.S. EN 848-2:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
EN ISO 4254-10:2009/AC:2010 | AGRICULTURAL MACHINERY - SAFETY - PART 10: ROTARY TEDDERS AND RAKES |
EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
UNI EN 12001 : 2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
UNI EN 12203 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
UNI EN 13113 : 2010 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
UNI EN 14910 : 2010 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
UNI EN 972 : 2010 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
UNI EN 474-12 : 2009 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
UNI EN 614-1 : 2009 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
UNI EN 500-1 : 2010 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
UNI EN 15027 : 2009 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
UNI EN 13977 : 2011 | RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
UNI EN 14017 : 2010 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
UNI EN 12750 : 2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
UNI EN 1114-1 : 2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
UNI EN 1870-16 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
UNI EN 860 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES |
UNI EN 13457 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
UNI EN 815 : 2009 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
UNI EN 12649 : 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
UNI EN 12653 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
UNI EN 14439 : 2009 | CRANES - SAFETY - TOWER CRANES |
UNI EN 12547 : 2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
UNI EN 201 : 2010 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
UNI EN 13418 : 2013 | PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
UNI EN 859 : 2012 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
UNI EN 13112 : 2010 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
UNI EN 996 : 2009 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
UNI EN ISO 11681-1 : 2012 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 1: CHAIN-SAWS FOR FOREST SERVICE |
UNI EN ISO 19432 : 2013 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS |
UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
UNI EN 1870-14 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
UNI EN 1953 : 2013 | Atomising and spraying equipment for coating materials - Safety requirements |
UNI EN 1915-4 : 2012 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
UNI EN 1870-4 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
UNI EN 792-8 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
UNI EN 12409 : 2011 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
UNI EN 14238 : 2009 | CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES |
UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
UNI EN 931 : 2010 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
UNI EN 848-2 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
UNI EN 930 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
EN 13204:2016 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
UNI EN 12336 : 2009 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
UNI EN 869 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
UNI EN 792-9 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
UNI EN 14043 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
UNI EN 861 : 2012 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
UNI EN 14886 : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
UNI EN 14044 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
UNI EN 690 : 2014 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
DIN EN ISO 11148-6:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS (ISO 11148-6:2012) |
UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
ISO 5395-2:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers |
UNI EN 1807-1 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
10/30235571 DC : DRAFT DEC 2010 | BS EN 13418 - PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS |
UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
09/30183554 DC : 0 | BS EN ISO 11148-8 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS |
BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
14/30293313 DC : 0 | BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES |
BS ISO 4254-9:2008 | Agricultural machinery. Safety Seed drills |
16/30342849 DC : 0 | BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
I.S. EN ISO 11148-9:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS (ISO 11148-9:2011) |
BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
00/715165 DC : DRAFT OCT 2000 | BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
BS ISO 19224:2017 | Continuous surface miners (CSM). Safety requirements |
13/30284894 DC : 0 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
DIN EN 16307-6 E : 2014 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
DIN EN ISO 11148-4:2013-05 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
DIN EN 1870-19:2014-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
PREN 12013 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
13/30255092 DC : 0 | BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
02/706849 DC : DRAFT MAY 2002 | BS EN 1915-4 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS |
DIN EN ISO 11806-1:2012-05 | Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
UNI EN ISO 11806-1 : 2012 | AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
BS EN 12012-1 : 2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
DIN EN 15572:2015-12 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
10/30211872 DC : 0 | BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
14/30302903 DC : 0 | BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
BS EN ISO 11148-6:2012 | Hand-held non-electric power tools. Safety requirements Assembly power tools for threaded fasteners |
12/30263881 DC : 0 | BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
09/30175684 DC : 0 | BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
09/30187374 DC : 0 | BS ISO 11148-2 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS |
04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
BS EN 16228-1:2014 | Drilling and foundation equipment. Safety Common requirements |
08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
16/30335973 DC : 0 | BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) |
UNI EN 1829-1 : 2010 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES |
17/30317170 DC : 0 | BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
16/30331355 DC : 0 | BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES |
BS EN ISO 16093:2017 | Machine tools. Safety. Sawing machines for cold metal |
14/30293310 DC : 0 | BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
11/30232159 DC : 0 | BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
14/30297793 DC : 0 | BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
12/30268301 DC : 0 | BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
DIN ISO 20966:2008-04 | AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
DIN EN 15571 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
BS EN 1807-1:2013 | Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
DIN EN 1870-18:2013-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
BS EN 16851:2017 | Cranes. Light crane systems |
10/30214886 DC : 0 | BS EN ISO 5395-2 - GARDEN EQUIPMENT - SAFETY OF POWERED LAWNMOWERS - PART 2: PEDESTRIAN CONTROLLED LAWNMOWERS |
DIN EN ISO 16093 E : 2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
DIN EN ISO 23771:2015-06 | TEXTILE MACHINERY - GUIDE TO THE DESIGN OF TEXTILE MACHINERY FOR REDUCTION OF THE NOISE EMISSIONS (ISO 23771:2015) |
BS EN ISO 11148-7:2012 | Hand-held non-electric power tools. Safety requirements Grinders |
13/30246657 DC : 0 | BS EN 16307-6 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
BS EN 14017 : 2005 | AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY |
DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
04/19987464 DC : 0 | BS EN 15027 - TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
06/30154874 DC : DRAFT SEP 2006 | BS ISO 4254-9 - AGRICULTURAL MACHINERY - SAFETY - PART 9: SEED DRILLS |
BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
BS EN 14886:2008 | Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements |
PREN 13525 : DRAFT 2016 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
UNI EN 1870-18 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
DIN EN ISO 5395-3:2014-03 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013 + AMD 1:2017, CORRECTED VERSION 2017-03) |
UNE-EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
BS ISO 20966:2007 | Automatic milking installations. Requirements and testing |
DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
DIN EN 15061 E : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
DIN EN 15093 E : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
DIN EN ISO 11148-10:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
UNI EN ISO 11148-11 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS |
I.S. EN ISO 5395-2:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 2: PEDESTRIAN-CONTROLLED LAWNMOWERS (ISO 5395-2:2013) |
EN 1459-1:2017 | Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
I.S. EN 16228-1:2014 | DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS |
UNI EN ISO 11148-3 : 2013 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS |
I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
BS EN 474-1 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
I.S. EN ISO 5395-3:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013) |
16/30337122 DC : 0 | BS EN 16990 - NON-TYPE APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - ALL TERRAIN VEHICLES (ATVS - QUADS) AND SIDE BY SIDE VEHICLES - SAFETY REQUIREMENTS AND TEST METHODS |
EN ISO 5395-3:2013/A2:2018 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 3: RIDE-ON LAWNMOWERS WITH SEATED OPERATOR (ISO 5395-3:2013/AMD 2:2017) |
PREN 13852-1 : DRAFT 2011 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
PREN 12547 : DRAFT 2011 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
BS EN 474-1:2006+A6:2019 | Earth-moving machinery. Safety General requirements |
14/30301874 DC : 0 | BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
ONORM EN 12733 : 2011 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
PREN 13020 : DRAFT 2014 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
SAE J 1782 : 2013 | SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEMS - NOISE CONTROL |
ISO/TS 3691-7:2011 | Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community |
DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
EN 12012-1:2007+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
BS EN 12301 : 2000 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
I.S. EN ISO 11148-3:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS (ISO 11148-3:2012) |
DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
ONORM EN 12301 : 2009 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
DIN EN 14681 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
DIN EN 13977:2011-04 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
DIN EN 861:2012-09 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
DIN EN 201:2010-02 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
DIN EN 14673 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
DIN EN 972:2011-07 | Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010) |
DIN EN 859:2012-09 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
DIN EN 14439:2010-03 | CRANES - SAFETY - TOWER CRANES |
DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
DIN EN 1114-1:2012-01 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
DIN EN 14044:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
DIN EN 474-12:2010-05 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators (includes Amendment A1:2008) |
DIN EN 860:2012-09 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
DIN EN 14043:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
DIN EN 14656 E : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
DIN EN 690:2014-03 | AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY |
ISO 4254-10:2009 | Agricultural machinery Safety Part 10: Rotary tedders and rakes |
BS EN 12547:2014 | Centrifuges. Common safety requirements |
ISO 11148-6:2012 | Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners |
ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
BS EN ISO 10821 : 2005 | INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS |
UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
BS EN 690:2013 | Agricultural machinery. Manure spreaders. Safety |
ISO 11148-1:2011 | Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners |
ISO 19432:2012 | Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements |
DIN EN 12301:2010-02 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
ISO 10821:2005 | Industrial sewing machines Safety requirements for sewing machines, units and systems |
BS EN 13525 : 2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
BS EN 869 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
UNE-EN 16228-1:2015 | Drilling and foundation equipment - Safety - Part 1: Common requirements |
ISO 4254-1:2013 | Agricultural machinery — Safety — Part 1: General requirements |
BS EN 703 : 2004 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
UNE-EN 13524:2003 | Highway maintenance machines - Safety requirements |
BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
BS EN 500-1 : 2006 | MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS |
BS EN 12336 : 2005 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
BS EN 13112 : 2002 | TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS |
EN 13525:2005+A2:2009 | Forestry machinery - Wood chippers - Safety |
BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
UNE-EN ISO 11681-1:2012 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
BS EN 13204 : 2004 | DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
BS EN 931 : 1998 | FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS |
UNE-EN 12649:2009 | Concrete compactors and smoothing machines - Safety |
BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
BS EN 201:2009 | Plastics and rubber machines. Injection moulding machines. Safety requirements |
UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
BS EN 1915-4 : 2004 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION |
UNE-EN ISO 11681-2:2012 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) |
BS EN 1746:1999 | Safety of machinery. Guidance for the drafting of the noise clauses of safety standards |
BS EN 13977:2011 | Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance |
ISO 11148-2:2011 | Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools |
BS EN 996 : 1996 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
UNE-EN 12001:2013 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
BS EN 13021 : 2003 | WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
BS EN 930 : 1997 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS |
BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
ISO 11148-9:2011 | Hand-held non-electric power tools Safety requirements Part 9: Die grinders |
UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
UNE-EN 13114:2002 | Tannery machines- Rotating process vessels - Safety requirements. |
ISO 11148-8:2011 | Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers |
BS EN 14985:2012 | Cranes. Slewing jib cranes |
BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
ISO 23771:2015 | Textile machinery Guide to the design of textile machinery for reduction of the noise emissions |
BS EN 1870-3:2014 | Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
BS EN 972 : 1998 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
UNE-EN ISO 19432:2013 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
ISO 11148-11:2011 | Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears |
ISO 11680-1:2011 | Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 1: Machines fitted with an integral combustion engine |
UNE-EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
ISO 11681-2:2011 | Machinery for forestry Portable chain-saw safety requirements and testing Part 2: Chain-saws for tree service |
BS EN 12750:2013 | Safety of woodworking machines. Four sided moulding machines |
BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
ISO 11148-5:2011 | Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills |
BS EN 1870-4:2012 | Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
UNI EN 12301 : 2008 | PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS |
ISO 18217:2015 | Safety of woodworking machines Edge-banding machines fed by chain(s) |
BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNE-EN 860:2007 | Safety of woodworking machines - One side thickness planing machines |
ISO 16093:2017 | Machine tools — Safety — Sawing machines for cold metal |
UNE-EN ISO 11850:2012 | Machinery for forestry - General safety requirements (ISO 11850:2011) |
BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
BS EN 15027 : 2007 | TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY |
UNE-EN 13112:2002 | Tannery machines - Splitting and bandknife shearing machines - Safety requirements. |
UNE-EN 12409:2009 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
UNE-EN 13000:2010 | Cranes - Mobile cranes |
UNE-EN 13525:2005 | Forestry machinery - Wood chippers - Safety |
ISO 11148-10:2011 | Hand-held non-electric power tools Safety requirements Part 10: Compression power tools |
BS EN 13114 : 2002 | TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS |
DIN EN ISO 19432:2012-12 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
UNE-EN 15059:2009 | Snow grooming equipment - Safety requirements |
ISO 11148-7:2012 | Hand-held non-electric power tools — Safety requirements — Part 7: Grinders |
BS EN 474-12 : 2006 | EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS |
I.S. EN 13525:2005 | FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
BS EN 13113 : 2002 | TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS |
UNE-EN 1870-16:2013 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
BS EN 14439 : 2006 | CRANES - SAFETY - TOWER CRANES |
UNE-EN 859:2008 | Safety of woodworking machines - Hand fed surface planing machines |
UNE-EN ISO 10517:2010 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
BS EN 860 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
UNE-EN 13113:2002 | Tannery machines - Roller coating machines - Safety requirements. |
UNE-EN 1114-1:2012 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
UNI EN ISO 11680-1 : 2012 | MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 1: MACHINES FITTED WITH AN INTEGRAL COMBUSTION ENGINE |
EN 1417:2014 | Plastics and rubber machines - Two-roll mills - Safety requirements |
EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
EN ISO 11148-8:2011 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
EN 13898:2003+A1:2009/AC:2010 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements |
EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
EN 792-7:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
EN ISO 11850:2011/A1:2016 | MACHINERY FOR FORESTRY - GENERAL SAFETY REQUIREMENTS (ISO 11850:2011+A1:2016) |
EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
EN ISO 11681-1:2011 | Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
EN 15027:2007+A1:2009 | Transportable wall saw and wire saw equipment for job site - Safety |
EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
EN 14985:2012 | Cranes - Slewing jib cranes |
EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
EN 14910:2007+A1:2009 | Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
EN ISO 11148-7:2012 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
UNI EN 13021 : 2009 | WINTER SERVICE MACHINES - SAFETY REQUIREMENTS |
EN ISO 11148-6:2012 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
EN 13977:2011 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
EN ISO 11148-4:2012 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
EN ISO 11148-12:2012 | Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
EN ISO 23771:2015 | Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015) |
EN ISO 11148-2:2011 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) |
EN ISO 4254-14:2016 | Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) |
UNI EN 13524 : 2014 | HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS |
EN 14238:2004+A1:2009 | Cranes - Manually controlled load manipulating devices |
EN 1870-16:2012 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
EN 996:1995+A3:2009 | Piling equipment - Safety requirements |
EN ISO 11681-2:2011/A1:2017 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011/AMD 1:2017) |
EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
EN ISO 10821:2005/A1:2009 | Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01) |
EN 1953:2013 | Atomising and spraying equipment for coating materials - Safety requirements |
EN 972:1998+A1:2010/AC:2011 | TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS |
EN ISO 11148-5:2011 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
EN 14492-1:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
EN 792-8:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
EN 930:1997+A2:2009 | Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
EN ISO 11148-1:2011 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
EN 14017:2005+A2:2009 | Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
EN 13128:2001+A2:2009/AC:2010 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
EN ISO 11148-3:2012 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
EN ISO 11148-11:2011 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
EN 15059:2009+A1:2015 | Snow grooming equipment - Safety requirements |
EN 1870-3:2014 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
EN 1870-14:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
EN 1915-4:2004+A1:2009 | Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
UNI EN 13019 : 2009 | MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
EN 474-12:2006+A1:2008 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
EN 1870-19:2013 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
EN 859:2007+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
EN 14439:2006+A2:2009 | Cranes - Safety - Tower cranes |
EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN 1870-17:2012+A1:2015 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
EN 815:1996+A2:2008 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
EN 792-9:2001+A1:2008 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
EN 848-2 : 2007 COR 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
EN 690:2013 | Agricultural machinery - Manure spreaders - Safety |
EN 861:2007+A2:2012 | Safety of woodworking machines - Surface planing and thicknessing machines |
EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
EN ISO 11148-9:2011 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
EN 14492-2:2006+A1:2009/AC:2010 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
EN 15572:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
EN 1746:1998 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
EN ISO 11148-10:2011 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
EN 14018:2005+A1:2009 | Agricultural and forestry machinery - Seed drills - Safety |
EN 16307-6:2014 | Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers |
EN 931:1997+A2:2009 | Footwear manufacturing machines - Lasting machines - Safety requirements |
EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
EN 14070:2003+A1:2009/AC:2010 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
I.S. EN 12012-4:2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
DIN EN 15572 E : 2015 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
DIN EN ISO 11148-5:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
I.S. EN ISO 16092-1:2018 | MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017) |
I.S. EN ISO 4254-8:2018 | AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS (ISO 4254-8:2018) |
DIN EN ISO 11148-1:2012-06 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
09/30183560 DC : 0 | BS ISO 11148-12 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: CIRCULAR, OSCILLATING AND RECIPROCATING SAWS |
UNI EN ISO 11148-7 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
I.S. EN ISO 11148-1:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS (ISO 11148-1:2011) |
DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
BS EN ISO 11148-8:2011 | Hand-held non-electric power tools. Safety requirements Sanders and polishers |
03/301050 DC : DRAFT JAN 2003 | ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL |
15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
16/30318924 DC : 0 | BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') |
BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
I.S. EN 14886:2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
I.S. EN ISO 11148-4:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS (ISO 11148-4:2012) |
09/30187377 DC : 0 | BS ISO 11148-5 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS |
16/30341470 DC : 0 | BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS) |
BS EN ISO 18217:2015 | Safety of woodworking machines. Edge-banding machines fed by chain(s) |
17/30364322 DC : 0 | BS EN 16307-2 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SUPPLEMENTARY REQUIREMENTS FOR SELF-PROPELLED VARIABLE REACH TRUCKS |
I.S. EN 792-7:2002 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
12/30260496 DC : 0 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
15/30300474 DC : DRAFT FEB 2015 | BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS |
ISO 4254-8:2018 | Agricultural machinery — Safety — Part 8: Solid fertilizer distributors |
09/30196808 DC : 0 | BS ISO 11806-1 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 1: MACHINES WITH INTEGRAL COMBUSTION ENGINE |
DIN EN ISO 11148-7:2013-01 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
07/30172338 DC : DRAFT DEC 2007 | BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
BS EN 16307-6:2014 | Industrial trucks. Safety requirements and verification Supplementary requirements for burden and personnel carriers |
13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
DIN EN 16743 E : 2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
BS EN ISO 11148-9:2011 | Hand-held non-electric power tools. Safety requirements Die grinders |
98/717506 DC : DRAFT DEC 1998 | PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
UNE-EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
UNE-EN ISO 23771:2015 | Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015) |
UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
PREN 14439 : DRAFT 2014 | CRANES - SAFETY - TOWER CRANES |
BS EN ISO 4254-14:2016 | Agricultural machinery. Safety Bale wrappers |
14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
14/30299146 DC : 0 | BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
15/30294714 DC : DRAFT MAY 2015 | BS EN ISO 4254-9 - AGRICULTURAL MACHINERY - SAFETY - PART 9: SEED DRILLS |
14/30298247 DC : 0 | BS EN 13020 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
06/30154871 DC : DRAFT SEP 2006 | BS ISO 4254-8 - AGRICULTURAL MACHINERY - SAFETY - PART 8: SOLID FERTILIZER DISTRIBUTORS |
00/717064 DC : DRAFT NOV 2000 | PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES |
PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
BS EN ISO 11148-4:2012 | Hand-held non-electric power tools. Safety requirements Non-rotary percussive power tools |
DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
09/30187380 DC : 0 | BS ISO 11148-10 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
UNE-EN ISO 18217:2016 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
CAN/CSA-B354.6:17 | Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations) |
DIN EN 15094 E : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
DIN EN 14677 E : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
UNE-EN 16252:2013 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
BS EN ISO 10517 : 2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
I.S. EN ISO 11148-7:2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS (ISO 11148-7:2012) |
I.S. EN ISO 11148-11:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS (ISO 11148-11:2011) |
I.S. EN ISO 19085-1:2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
UNI EN 16307-6 : 2014 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 6: SUPPLEMENTARY REQUIREMENTS FOR BURDEN AND PERSONNEL CARRIERS |
UNE-EN 12999:2011 | Cranes - Loader cranes |
BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
I.S. EN 1870-19:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
BS EN ISO 19085-1:2017 | Woodworking machines. Safety Common requirements |
ISO 5395-3:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator |
EN ISO 18217:2015 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
16/30337481 DC : 0 | BS EN 13525 - FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY |
EN 16719:2018 | Transport platforms |
EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
UNI EN ISO 11148-10 : 2012 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS |
15/30314036 DC : 0 | BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
BS EN 1459-2 : 2015 | ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS |
PREN 1417 : DRAFT 2013 | PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS |
I.S. EN ISO 11148-5:2011 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS (ISO 11148-5:2011) |
EN 12301:2000+A1:2008 | Plastics and rubber machines - Calenders - Safety requirements |
I.S. EN 15059:2009 | SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS |
DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
I.S. EN 12012-1:2007 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
DIN EN ISO 11681-2:2012-04 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011 + AMD 1:2017) |
DIN EN 12012-4:2010-01 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
DIN EN 13457:2010-10 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010 |
DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
DIN EN 1889-1 E : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
DIN EN 792-9:2009-12 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
DIN EN 13524:2014-07 | Highway maintenance machines - Safety requirements (includes Amendment A2:2014) |
DIN EN 289:2014-09 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
BS EN 13020:2015 | Road surface treatment machines. Safety requirements |
BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
BS EN 12012-4 : 2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
BS EN 13019 : 2001 | MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS |
UNE-EN ISO 4254-1:2016 | Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
ISO 11681-1:2011 | Machinery for forestry Portable chain-saw safety requirements and testing Part 1: Chain-saws for forest service |
BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
ISO 4254-14:2016 | Agricultural machinery Safety Part 14: Bale wrappers |
BS EN 14043:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
BS EN ISO 11681-2 : 2011 | MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAW SAFETY REQUIREMENTS AND TESTING - PART 2: CHAIN-SAWS FOR TREE SERVICE (ISO 11681-2:2011) |
BS EN 1114-1:2011 | Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders |
BS EN 1953:2013 | Atomising and spraying equipment for coating materials. Safety requirements |
I.S. EN 860:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
ISO 11850:2011 | Machinery for forestry — General safety requirements |
BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
ISO 11148-3:2012 | Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers |
BS EN 792-9 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS |
BS EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar. Safety requirements |
BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
BS EN 14910 : 2007 | GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY |
BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
ISO 11148-12:2012 | Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws |
BS EN 1870-14 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
BS EN 792-7 : 2001 | HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS |
BS EN 1870-17 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
EN 12387:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
DIN EN 815:1996-11 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
EN 13019:2001+A1:2008 | Machines for road surface cleaning - Safety requirements |
DIN EN 16851:2017-06 | Cranes - Light crane systems |
CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
DIN EN 14886:2008-06 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
DIN EN 815:2009-12 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
DIN EN 12012-1:2010-02 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
DIN EN 996:2010-02 | PILING EQUIPMENT - SAFETY REQUIREMENTS |
EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
UNE-EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
UNE-EN 12203:2004 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
UNE-EN 1870-17:2013 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
UNE-EN 848-2:2007+A1:2010 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
UNE-EN 848-2:2007 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
UNE-EN 859:2008+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
UNE-EN 500-1:2007 | Mobile road construction machinery - Safety - Part 1: Common requirements |
UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
UNE-EN 14018:2006 | Agricultural and forestry machinery - Seed drills - Safety |
ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
US$201.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.