ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
|
EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
|
ISO 14343:2017
|
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification
|
EN 10079:2007
|
Definition of steel products
|
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
|
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements
|
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
|
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
|
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
|
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
|
EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
|
EN ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
|
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
|
EN 10028-6:2017
|
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
|
ISO/TR 15608:2017
|
Welding Guidelines for a metallic materials grouping system
|
ISO 2566-2:1984
|
Steel Conversion of elongation values Part 2: Austenitic steels
|
EN 764-1:2015+A1:2016
|
Pressure equipment - Part 1: Vocabulary
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature
|
EN 10217-4:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
|
EN ISO 2566-1:1999
|
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
|
EN ISO 204:2009
|
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009)
|
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
|
EN 764-5:2014
|
Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
EN 1011-2:2001/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
|
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method
|
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
|
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
|
EN 10272:2016
|
Stainless steel bars for pressure purposes
|
EN 10028-5:2017
|
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
|
EN 10222-3:2017
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
|
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels
|
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
|
EN ISO 2566-2:1999
|
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
|
EN 10222-4:2017
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
|
EN ISO 14343:2017
|
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
CEN ISO/TR 15608:2017
|
Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
|
EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
|
EN 10217-3:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
|
EN 12074:2000
|
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
|
EN 764-2:2012
|
Pressure equipment - Part 2: Quantities, symbols and units
|
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
|
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
|
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
|
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
|
EN 10028-4:2017
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
|
EN 764-3:2002
|
Pressure equipment - Part 3: Definition of parties involved
|
ISO 204:2009
|
Metallic materials Uniaxial creep testing in tension Method of test
|
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
|
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
|
EN 10217-1:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
|
EN 10217-5:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
|
EN 13479:2017
|
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
|
EN 10217-6:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
|
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
|
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
|
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
EN ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
|