EN 13616:2004/AC:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
01-06-2016
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 General requirements
5 Overfill prevention device Type A
6 Overfill prevention device Type B
Annex A (normative) - Test methods for overfill prevention
device Type B
Annex B (normative) - Test rigs layouts for overfill prevention
device Type A
Annex C (informative) - Additional information for overfill
prevention devices Types A and B
Annex D (normative) - System of evaluation of conformity
Annex E (informative) - Information on explosion protected
equipment
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements or other provisions of
the Equipment and Protective Systems intended for use
in potentially explosive atmospheres Directive
Annex ZB (informative) - Clauses of this European Standard
addressing essential requirements or other provisions
of the Electromagnetic Compatibility Directive
Annex ZC (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
Bibliography
Describes the minimum performance and construction requirements for various types of overfill prevention devices which are limited to static tanks of shop fabricated manufacture both metallic and non metallic. It covers devices for underground tanks and also above ground tanks with a maximum height of 5 m.
Committee |
TC 221
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
I.S. EN 13616:2004 | Identical |
PN EN 13616 : 2004 AC 2006 | Identical |
NEN EN 13616 : 2004 C1 2006 | Identical |
BS EN 13616:2004 | Identical |
DIN EN 13616:2004-09 | Identical |
UNE-EN 13616:2005 | Identical |
NF EN 13616 : 2004 | Identical |
SN EN 13616 : 2004 CORR 2006 | Identical |
NS EN 13616 : 2004 AC 2006 | Identical |
UNI EN 13616 : 2004 | Identical |
NBN EN 13616 : 2004 COR 2006 | Identical |
CEN/TR 15120:2013 | Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading |
UNE-EN 15208:2014 | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
05/30132851 DC : DRAFT APR 2005 | EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
I.S. CEN TR 15120:2005 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - GUIDANCE AND RECOMMENDATIONS FOR LOADING, TRANSPORT AND UNLOADING |
DIN EN 13341:2011-04 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011) |
BS EN 15208:2014 | Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications |
EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
EN 12285-2 : 2005 | WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
10/30233680 DC : 0 | BS EN 13575 - STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TR 15120:2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - GUIDANCE AND RECOMMENDATIONS FOR LOADING, TRANSPORT AND UNLOADING |
DIN EN 12285-2:2005-05 | WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
DIN EN 13352:2012-06 | Specification for the performance of automatic tank contents gauges |
DIN EN 15208:2014-07 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
UNE-EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
I.S. EN 15207:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
I.S. EN 13352:2012 | SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
I.S. EN 15208:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
I.S. EN 13341:2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
I.S. EN 13575:2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
VDI 2291:2016-06 | Emission control - Test criteria for monitoring vapour recovery systems |
UNI EN 14116 : 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
10/30227686 DC : 0 | BS EN 13352 - SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
I.S. EN 14116:2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
DIN EN 14116:2014-12 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
API 551 : 2016 | PROCESS MEASUREMENT |
API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
ISO 28300:2008 | Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks |
UNI EN 15207 : 2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
UNI EN 13341 : 2011 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
UNI EN 15208 : 2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
UNI EN 13575 : 2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
UNI EN ISO 28300 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
EN 14116:2012+A1:2014 | Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels |
12/30261228 DC : 0 | BS EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
UNE-EN 14116:2013 | Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels |
BS EN ISO 28300:2008 | Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks |
DIN EN 15207 E : 2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
BS EN 15207:2014 | Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
BS EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods |
UNE-EN ISO 28300:2012 | Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008) |
12/30210113 DC : 0 | BS EN ISO 28300 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
UNE-EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
BS EN 13341 : 2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
DIN EN 15207:2015-03 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE |
EN 15208:2014 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS |
EN 15207:2014 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
14/30293202 DC : 0 | BS EN 15969-1 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE DATA TRANSFER BETWEEN TANK VEHICLE AND WITH STATIONARY FACILITIES - PART 1: PROTOCOL SPECIFICATION - CONTROL, MEASUREMENT AND EVENT DATA |
PD CEN/TR 15120:2013 | Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading |
DIN EN ISO 28300:2008-11 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
UNE-EN 15207:2015 | Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
DIN EN 13575:2012-06 | Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods |
DIN EN ISO 28300:2012-02 (Draft) | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
BS EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
BS EN 14116 : 2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS |
BS EN 12285-2:2005 | Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
EN ISO 28300:2008/AC:2009 | Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008/Cor 1:2009) |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
IEC 61000-6-4:2006+AMD1:2010 CSV | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
IEC 61000-6-1 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ISO 9001:2015 | Quality management systems — Requirements |
IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO/IEC Guide 65:1996 | General requirements for bodies operating product certification systems |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.