IEC 60076-15:2015
|
Power transformers - Part 15: Gas-filled power transformers
|
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements
|
IEC 60076-7:2005
|
Power transformers - Part 7: Loading guide for oil-immersed power transformers
|
EN 60214-1:2014
|
Tap-changers - Part 1: Performance requirements and test methods
|
IEC TR 60616:1978
|
Terminal and tapping markings for power transformers
|
EN 60076-5:2006
|
Power transformers - Part 5: Ability to withstand short-circuit
|
IEC 60076-10:2016
|
Power transformers - Part 10: Determination of sound levels
|
EN 60076-11:2004
|
Power transformers - Part 11: Dry-type transformers
|
IEC 60076-5:2006
|
Power transformers - Part 5: Ability to withstand short circuit
|
ISO 3:1973
|
Preferred numbers Series of preferred numbers
|
IEEE C57.12.00-2015
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
IEC 60068-3-3:1991
|
Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments
|
IEC 60076-4:1976
|
Power transformers - Part 4: Tappings and connections
|
IEC 60076-8:1997
|
Power transformers - Part 8: Application guide
|
IEEE C57.12.90-2010
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
IEC 60076-12:2008
|
Power transformers - Part 12: Loading guide for dry-type power transformers
|
EN 60076-10:2016
|
Power transformers - Part 10: Determination of sound levels
|
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
|
IEC 60076-3:2013
|
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
|
IEC 60050-421:1990
|
International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
EN 60296:2012
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
IEC 60137:2017
|
Insulated bushings for alternating voltages above 1000 V
|
IEC 60076-6:2007
|
Power transformers - Part 6: Reactors
|
IEC 62032:2012
|
Guide for the Application, Specification and Testing of Phase-Shifting Transformers
|
ISO 14001:2015
|
Environmental management systems — Requirements with guidance for use
|
IEEE C57.142 : 2010
|
GUIDE TO DESCRIBE THE OCCURRENCE AND MITIGATION OF SWITCHING TRANSIENTS INDUCED BY TRANSFORMERS, SWITCHING DEVICE, AND SYSTEM INTERACTION
|
IEC 62262:2002
|
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
|
ISO 9001:2015
|
Quality management systems — Requirements
|
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
|
IEC 61378-2:2001
|
Convertor transformers - Part 2: Transformers for HVDC applications
|
IEC 60076-2:2011
|
Power transformers - Part 2: Temperature rise for liquid-immersed transformers
|
IEC TS 60076-14:2009
|
Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials
|
IEC 60076-13:2006
|
Power transformers - Part 13: Self-protected liquid-filled transformers
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
EN 60076-2:2011
|
Power transformers - Part 2: Temperature rise for liquid-immersed transformers
|
EN 60721-3-4:1995/A1:1997
|
CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS
|
IEC 60076-10-1:2016
|
Power transformers - Part 10-1: Determination of sound levels - Application guide
|
IEC 60076-16:2011
|
Power transformers - Part 16: Transformers for wind turbine applications
|
IEC 61378-1:2011
|
Converter transformers - Part 1: Transformers for industrial applications
|
IEC 60214-1:2014
|
Tap-changers - Part 1: Performance requirements and test methods
|
IEC 60310:2016
|
Railway applications - Traction transformers and inductors on board rolling stock
|