• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS ISO 9001:2008


An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Quality management systems - Requirements
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date



Specifies requirements for quality management systems. The requirements are generic, i.e. applicable to organizations regardless of size, type, industry, product or service. A quality management system that meets the requirements of AS/NZS ISO 9001 can be used for internal application by organizations, for certification and for contractural purposes. It focuses on the quality management system's effectiveness in meeting customer requirements, and may be used to demonstrate the ability to meet customer requirements, prevent nonconformity and address customer satisfaction and quality improvement. This Standard is identical with and has been reproduced from ISO 9001:2008. To assist organizations currently using AS/NZS ISO 9001:2000 to make the transition to AS/NZS ISO 9001:2008, the 2000 edition will remain available superseded until December 2011.

0 7337 8970 6
Standards Australia

Standards Relationship
ISO 9001:2008 Identical

First published in Australia as AS 3901-1987/ISO 9001:1990, AS 3902-1987/ISO 9002:1990 and AS 3903-1987/ISO 9003:1990.First published in New Zealand as NZS 5601:1987, NZS 5602:1987 and NZS 5603:1987.AS 3901-1987/ISO 9001:1990 and NZS 5601:1987 redesignated in 1990 as Joint Standard AS 3901-1987/NZS 9001:1990/ISO 9001:1987.AS 3902-1987/ISO 9002:1990 and NZS 5602:1987 redesignated in 1990 as Joint Standard AS 3902-1987/NZS 9002:1990/ISO 9002:1987.AS 3903-1987/ISO 9003:1990 and NZS 5603:1987 redesignated in 1990 as Joint Standard AS 3903-1987/NZS 9003:1990/ISO 9003:1987.AS 3901-1987/NZS 9001:1990/ISO 9001:1987 jointly revised and redesignated as Joint Standard AS/NZS ISO 9001:1994.AS 3902-1987/NZS 9002:1990/ISO 9002:1987 jointly revised and redesignated as Joint Standard AS/NZS ISO 9002:1994.AS 3903-1987/NZS 9003:1990/ISO 9003:1987 jointly revised and redesignated as Joint Standard AS/NZS ISO 9003:1994.AS/NZS ISO 9001:1994 jointly revised and designated AS/NZS ISO 9001(Int):2000.AS/NZS ISO 9002:1994, AS/NZS ISO 9003:1994 and AS/NZS ISO 9001(Int):2000 jointly revised, amalgamated and redesignated as AS/NZS ISO 9001:2000.Fourth edition 2008. Originated in Australia as AS 3901 1987/ISO 9001:1990, AS 3902 1987/ISO 9002:1990 and AS 3903 1987/ISO 9003:1990. Originated in New Zealand as NZS 5601:1987, NZS 5602:1987 and NZS 5603:1987. Previous edition AS/NZS ISO 9001:2000. Fourth edition 2008.

AS/NZS ISO 9000:2006 Quality management systems - Fundamentals and vocabulary
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS/NZS ISO 14001:2004 Environmental management systems - Requirements with guidance for use

AS/NZS 4421:2011 Guard and patrol security services
AS 1085.14-2012 Railway track material Prestressed concrete sleepers
AS/NZS 3800:2012 Electrical equipment for explosive atmospheres - Repair and overhaul
AS 2561-2010 Guide to the determination and the use of quality costs (Reconfirmed 2022)
AS/NZS 1577:2013 Scaffold decking components
HB 393-2011 Bunk beds for the short-term rental accommodation industry
AS 4797-2009 Stainless steel chain for lifting purposes (Reconfirmed 2019)
AS 1597.2-2013 Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS ISO 15189-2009 Medical laboratories - Particular requirements for quality and competence
HB 90.1:2012 The Small Business Handbook - Guide to ISO 9001:2008
AS/NZS 4677:2010 Steel utility services poles
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS/NZS 1576.2:2009 Scaffolding Couplers and accessories
AS 1085.20-2012 Railway track material Welding of steel rail
AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS/NZS 4065:2010 Concrete utility services poles
AS ISO 15189-2013 Medical laboratories - Requirements for quality and competence
ATS 4747.8-2010 Meters for non-urban water supply In-service compliance for non-urban water meters
AS 2144:2014 Traffic signal lanterns
AS 3864.2-2012 Medical refrigeration equipment - For the storage of blood and blood products User-related requirements for care, maintenance, performance verification and calibration
AS 2030.1-2009 Gas cylinders General requirements
HB 239:2011 Guidance on the repair and overhaul of electrical equipment for explosive atmospheres
AS/NZS 4455.2:2010 Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020)
AS 4606-2012 Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024)
AS/NZS 2815.2:2013 Training and certification of occupational divers Surface supplied diving to 30 m
AS 4852.2-2009 Variable message signs Portable signs
AS 4852.1-2009 Variable message signs - Fixed signs
SA HB 198:2014 Guide to the specification and testing of slip resistance of pedestrian surfaces
AS 3533.1-2009 Amusement rides and devices Design and construction
AS/NZS ISO/IEC 17024:2013 Conformity assessment - General requirements for bodies operating certification of persons
AS 5808-2009 Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for nonpharmaceutical products (EN 862:2005, MOD)
AS/NZS 3679.1:2010 Structural steel Hot-rolled bars and sections
AS 2758.5-2009 Aggregates and rock for engineering purposes Coarse asphalt aggregates
AS 5812-2011 Manufacturing and marketing of pet food
AS/NZS 3509:2009 LP Gas fuel vessels for automotive use (Reconfirmed 2019)
AS/NZS 3679.2:2010 Structural steel Welded I sections
AS/NZS 80079.34:2012 Explosive atmospheres Application of quality systems for equipment manufacture
AS/NZS 3678:2011 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1666.1-2009 Wire-rope slings Product specification (Reconfirmed 2019)
AS 3569-2010 Steel wire ropes - Product specification

View more information
Excluding VAT

Access your standards online with a subscription


  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.