• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7578 : 2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
Available format(s)

Hardcopy , PDF

Superseded date

27-08-2020

Language(s)

English

Published date

01-06-2018

This guide covers different ways by which the test methods used for elemental analysis of petroleum product and lubricant samples are calibrated before the sample analysis.

1.1This guide covers different ways by which the test methods used for elemental analysis of petroleum product and lubricant samples are calibrated before the sample analysis.

1.2Uniform practice for test method calibration is beneficial in standardizing the procedures, and obtaining consistent results across different laboratories.

1.3This guide includes only the basic steps for generally encountered instrument types. Anything out of the ordinary may require special procedures. See individual test methods for instructions to handle such situations.

1.4This guide is not a substitute for a thorough understanding of the actual test method to be used, caveats it contains, and additional instrument preparation that may be required.

1.5The user should not expand the scope of the test methods to materials or concentrations outside the scope of the test methods being used.

1.6This guide should also be applicable to sample preparation of non-petroleum based bio-fuels for elemental analysis. Work is underway on these aspects in Subcommittee D02.03. As more information becomes available, it will be added to this standard.

1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Guide
Pages
13
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 8056 : 2018 Standard Guide for Elemental Analysis of Crude Oil
ASTM D 7961 : 2017 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure

ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 7751 : 2014 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 3246 : 2011 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 1548 : 1992 : EDT 1 Test Method for Vanadium in Navy Special Fuel Oil (Withdrawn 1997)
ASTM D 5708 : 2005 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 5453 : 2009 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1839 : 2014 : R2019 Standard Test Method for Amyl Nitrate in Diesel Fuels (Withdrawn 2019)
ASTM D 3341 : 2016 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method (Withdrawn 2022)
ASTM D 1552 : 2003 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 6595 : 2016 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 4929 : 1999 : EDT 1 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 3605 : 2000 : R2011 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D 7303 : 2006 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 4047 : 2000 : R2005 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ASTM D 1839 : 1991 : R2005 Standard Test Method for Amyl Nitrate in Diesel Fuels
ASTM D 4046 : 1991 : R2000 : EDT 1 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 5600 : 2004 : EDT 1 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1091 : 2011 Standard Test Methods for Phosphorus in Lubricating Oils and Additives
ASTM D 5622 : 1995 : R2011 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D 7343 : 2007 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 7303 : 2012 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 5291 : 2010 : R2015 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 5600 : 2009 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 3230 : 1999 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 5800 : 2014 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 7622 : 2010 : R2015 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 7039 : 2013 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5600 : 2014 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5800 : 2014 : EDT 1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 4951 : 2002 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7111 : 2015 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7220 : 2012 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 3230 : 2009 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 5708 : 2015 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 3120 : 2008 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5056 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 5453 : 2008 : REV B Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 7111 : 2016 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 2784 : 1989 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
ASTM D 4929 : 2007 : R2014 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 3228 : 2008 : R2019 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 5762 : 2009 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 7303 : 2017 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 3231 : 1999 Standard Test Method for Phosphorus in Gasoline
ASTM D 6732 : 2004 : R2015 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 3228 : 2019 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 5185 : 1997 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5863 : 2000 : REV A : R2011 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D 3231 : 2013 Standard Test Method for Phosphorus in Gasoline
ASTM D 1266 : 1998 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4047 : 2000 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phoshomolybdate Method
ASTM D 7220 : 2012 : R2017 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6667 : 2001 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3340 : 2007 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (Withdrawn 2013)
ASTM D 4629 : 2002 : R2007 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 7171 : 2005 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D 6920 : 2013 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018)
ASTM D 4927 : 2010 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 7212 : 2013 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM D 1018 : 2011 Standard Test Method for Hydrogen In Petroleum Fractions
ASTM D 5291 : 1992 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 6334 : 2012 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 5800 : 2015 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 1018 : 2011 : R2016 Standard Test Method for Hydrogen In Petroleum Fractions (Withdrawn 2021)
ASTM D 1091 : 2000 Standard Test Methods for Phosphorus in Lubricating Oils and Additives
ASTM D 3341 : 2005 : R2011 Standard Test Method for Lead in Gasoline<char: emdash>Iodine Monochloride Method
ASTM D 3831 : 2012 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D 1552 : 2008 : R2014 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 5453 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 3246 : 2014 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 1018 : 2000 Standard Test Method for Hydrogen In Petroleum Fractions
ASTM D 5622 : 2016 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D 6481 : 1999 : R2010 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D 4951 : 2000 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 5800 : 2000 : REV A Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 7319 : 2011 : EDT 1 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7318 : 2019 : EDT 1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 1318 : 2000 : R2005 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
ASTM D 5453 : 2012 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5184 : 2012 : R2017 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 6732 : 2004 : R2010 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 6792 : 2006 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7171 : 2005 : R2011 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D 4927 : 2002 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 3605 : 2000 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D 1552 : 1990 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 5622 : 1995 : R2000 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D 5291 : 2010 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 6792 : 2004 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 4929 : 2015 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 1266 : 2013 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 5762 : 2002 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 5762 : 2001 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4628 : 2014 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM D 6481 : 1999 : R2004 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D 1552 : 2016 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
ASTM D 4927 : 2005 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 8127 : 2017 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
ASTM D 7455 : 2008 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D 4929 : 2019 : REV A Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D 7318 : 2011 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 3237 : 2006 : EDT 1 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D 6667 : 2004 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3230 : 2005 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 4927 : 1996 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 7260 : 2012 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 5185 : 2005 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7318 : 2007 Standard Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 6920 : 2003 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM D 4629 : 2009 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 3230 : 2013 : R2018 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 5453 : 2008 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 7455 : 2014 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D 3228 : 2001 Standard Test Method for Total Nitrogen In Lubricating Oils and Fuel Oils By Modified Kjeldahl Method
ASTM D 5708 : 2000 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 5185 : 2002 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4628 : 2005 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
ASTM D 3605 : 2017 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D 6445 : 1999 : R2004 : EDT 1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)
ASTM D 4629 : 1996 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 1552 : 2000 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4927 : 2015 : R2020 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 5622 : 2017 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D 1266 : 1987 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4628 : 2002 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
ASTM D 3348 : 2012 : R2017 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022)
ASTM D 5059 : 1998 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D 5800 : 2015 : REV A Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 7623 : 2010 : R2015 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D 6728 : 2001 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 4046 : 2014 : R2019 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019)
ASTM D 7623 :2010 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
ASTM D 7040 : 2004 : R2015 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7740 : 201 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM D 3228 : 2008 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 6334 : 1998 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 6470 : 1999 : R2015 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D 7212 : 2006 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM D 5863 : 2000 : REV A Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D 5800 : 2019 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 6334 : 2012 : R2017 : EDT 1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Withdrawn 2022)
ASTM D 5185 : 2018 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5762 : 2005 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 4045 : 2004 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 3340 : 1998 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D 7751 : 2014 : EDT 1 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 5453 : 2005 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6595 : 2000 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 5762 : 2018 Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 4628 : 2016 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM D 6470 : 1999 : R2010 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D 6792 : 2004 : REV A Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 6732 : 2001 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 5800 : 2004 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 7041 : 2004 : R2010 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM D 7318 : 2013 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 3228 : 2008 : R2014 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 3246 : 1981 : R1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 7328 : 2013 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 5291 : 2016 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 5600 : 1998 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4307 : 1999 : R2004 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5800 : 2003 : REV A Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 3231 : 2018 Standard Test Method for Phosphorus in Gasoline
ASTM D 6667 : 2004 : R2010 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 1091 : 2000 : R2005 Standard Test Methods for Phosphorus in Lubricating Oils and Additives
ASTM D 5800 : 2014 : EDT 2 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 3237 : 2002 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM D 6792 : 2005 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 5185 : 2013 : EDT 1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6481 : 1999 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D 5708 : 2012 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 5863 : 2000 : REV A : R2005 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D 5291 : 2002 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 4045 : 2015 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 3230 : 2010 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 5453 : 2006 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 7751 : 2012 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 4929 : 1999 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 5384 : 2011 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
ASTM D 3230 : 1999 : R2004 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 3230 : 2008 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 3231 : 2002 Standard Test Method for Phosphorus in Gasoline
ASTM D 7319 : 2007 Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 5059 : 2014 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D 5863 : 2000 : REV A : R2016 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D 7111 : 2014 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 4628 : 2005 : R2011 : EDT 1 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4929 : 2004 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 6728 : 2011 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 7212 : 2007 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM D 5622 : 1995 : R2005 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D 3120 : 2003 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6732 : 2002 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 5800 : 2005 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 4929 : 2015 : REV A Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 7691 : 2011 : EDT 1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6728 : 2016 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 1018 : 2000 : R2005 Standard Test Method for Hydrogen In Petroleum Fractions
ASTM D 7111 : 2011 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1318 : 2016 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
ASTM D 6667 : 2010 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 4951 : 2006 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7171 : 2020 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D 5384 : 2014 : R2019 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
ASTM D 6792 : 2013 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 4045 : 2004 : R2010 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 3348 : 2012 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
ASTM D 7212 : 2013 : R2018 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM D 4927 : 2015 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 5185 : 2013 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6334 : 2012 : R2017 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 1091 : 2011 : R2016 Standard Test Methods for Phosphorus in Lubricating Oils and Additives (Withdrawn 2021)
ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3831 : 2001 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
ASTM D 4046 : 2014 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
ASTM D 4307 : 1999 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2784 : 2006 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
ASTM D 4927 : 2001 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6481 : 2014 : R2019 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 6792 : 2017 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM D 5762 : 2012 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 5059 : 2014 : R2019 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D 5056 : 1996 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 6920 : 2007 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM D 6595 : 2000 : R2011 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 1839 : 2014 Standard Test Method for Amyl Nitrate in Diesel Fuels
ASTM D 7691 : 2011 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7319 : 2017 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 8110 : 2017 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D 5056 : 2004 : R2010 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 5800 : 2004 : REV A Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 5762 : 2017 Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 6728 : 2001 : R2006 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 7039 : 2015 : REV A Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 3348 : 2007 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
ASTM D 7319 : 2009 Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7740 : 2011 : R2016 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
ASTM D 1552 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM D 6667 : 2014 : R2019 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3120 : 2003 : REV A Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5384 : 2014 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
ASTM D 5184 : 2001 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 7751 : 2011 : EDT 1 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 7328 : 2016 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 7318 : 2019 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 7039 : 2004 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 1552 : 2007 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 6792 : 2007 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 4929 : 2007 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D 5453 : 2003 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 7041 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM D 1552 : 1995 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 4629 : 2002 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 5291 : 2002 : R2007 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 5059 : 2020 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Spectroscopy
ASTM D 3341 : 2005 Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
ASTM D 8127 : 2017 : EDT 1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
ASTM D 1552 : 2015 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
ASTM D 4307 : 2017 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 5762 : 1998 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 1552 : 2001 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 3228 : 2003 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 6667 : 2014 : R2019 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 4951 : 2014 : R2019 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 3228 : 1996 Standard Test Method for Total Nitrogen In Lubricating Oils and Fuel Oils By Modified Kjeldahl Method
ASTM D 5056 : 2002 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5384 : 1995 : R2000 : EDT 1 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
ASTM D 5708 : 2011 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 5800 : 2003 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1552 : 2008 : R2014 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 3831 : 2001 : R2006 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D 7343 : 2018 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 7691 : 2016 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5059 : 2007 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D 4047 : 2000 : R2011 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ASTM D 4951 : 2009 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 7111 : 2005 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7039 : 2015 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3237 : 2006 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D 2784 : 2011 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (Withdrawn 2016)
ASTM D 5800 : 2008 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 5600 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7343 : 2012 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6445 : 1999 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry
ASTM D 4927 : 2014 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4629 : 2017 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 6595 : 2000 : R2005 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 7111 : 2015 : REV A Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7319 : 2011 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 4046 : 1991 : R2005 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 5184 : 2001 : R2006 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 7757 : 2012 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4629 : 2012 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 5863 : 2000 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D 7319 : 2012 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
ASTM D 7343 : 2012 : R2017 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 6334 : 2007 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
ASTM D 5600 : 2004 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5708 : 2002 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 6443 : 1999 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 5056 : 2015 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 7171 : 2016 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6667 : 2014 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
ASTM D 3246 : 2015 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)
ASTM D 1318 : 2000 : R2011 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
ASTM D 1839 : 1991 : R2000 : EDT 1 Standard Test Method for Amyl Nitrate in Diesel Fuels
ASTM D 4307 : 1999 : R2010 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 5185 : 2009 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7039 : 2007 Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4629 : 2012 : R2017 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 5291 : 2001 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 1839 : 2011 Standard Test Method for Amyl Nitrate in Diesel Fuels
ASTM D 4929 : 2016 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D 3230 : 2005 : REV A Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 4629 : 2008 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 5762 : 2010 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 7751 : 2011 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 3605 : 2016 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D 5291 : 1996 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3120 : 1996 : R2002 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6443 : 2004 : R2010 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 7328 : 2007 Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 7751 : 2016 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5059 : 2013 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
ASTM D 6470 : 1999 : R2004 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D 7220 : 2006 Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
ASTM D 4629 : 2010 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
ASTM D 6595 : 2017 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
ASTM D 3120 : 2006 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7040 : 2004 : R2010 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 3120 : 2006 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6443 : 2014 : R2019 : EDT 1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 7328 : 2011 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 1552 : 2008 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7328 : 2017 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 6443 : 2014 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 6481 : 2014 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
ASTM D 7260 : 2019 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 5185 : 2002 : EDT 1 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7041 : 2016 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
ASTM D 5184 : 2000 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D 3231 : 2007 Standard Test Method for Phosphorus in Gasoline
ASTM D 5762 : 2008 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 6792 : 2003 Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 4951 : 2014 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 5762 : 2012 : R2017 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 6732 : 2004 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 4628 : 1997 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
ASTM D 3237 : 2017 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D 7318 : 2018 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
ASTM D 7622 : 2010 : EDT 1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3341 : 2000 Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
ASTM D 3831 : 1998 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5800 : 2018 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 7040 :2004 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 8150 : 2017 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D 6792 : 2002 Standard Guide for A Quality System in Petroleum Products and Lubricants Testing Laboratories
ASTM D 7757 : 2017 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3237 : 1997 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM D 5185 : 2002 : EDT 2 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6470 : 1999 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D 4047 : 2018 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ASTM D 3230 : 2013 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 7260 : 2006 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 5800 : 2019 : REV A Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 3231 : 1989 Standard Test Method for Phosphorus in Gasoline
ASTM D 7622 : 2010 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
ASTM D 3230 : 2006 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 3120 : 2008 : R2014 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4045 : 2019 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 7041 : 2004 : R2010 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM D 5800 : 2000 : REV A : EDT 1 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
ASTM D 3831 : 2012 : R2017 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D 5384 : 1995 : R2005 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
ASTM D 7455 : 2019 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D 5708 : 2012 : EDT 1 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
ASTM D 1266 : 2007 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4307 : 1999 : R2015 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 3246 : 2005 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 4045 : 1999 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM D 1552 : 1983 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 5056 : 2004 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
ASTM D 5291 : 2009 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
ASTM D 5762 : 2018 : REV A Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 5453 : 2003 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 3228 : 2005 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
ASTM D 3231 : 2011 Standard Test Method for Phosphorus in Gasoline
ASTM D 4929 : 2017 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D 2784 : 1998 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
ASTM D 4046 : 2011 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
ASTM D 4929 : 2019 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D 7171 : 2005 : R2016 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D 3237 : 2012 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D 7328 : 2007 : EDT 1 Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
ASTM D 5762 : 2011 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D 1318 : 2000 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
ASTM D 3246 : 1992 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 5184 : 2012 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 7319 : 2013 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
ASTM D 3230 : 2019 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4047 : 2013 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
ASTM D 3605 : 2000 : R2005 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
ASTM D 3348 : 1998 Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)
ASTM D 6443 : 2004 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 7260 : 2017 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
ASTM D 5453 : 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3246 : 1996 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
ASTM D 5453 : 2000 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.