• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 1591 : 2013

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Obtaining Data for Fire Growth Models

Available format(s)

Hardcopy , PDF

Superseded date

25-08-2020

Language(s)

English

Published date

01-04-2013

CONTAINED IN VOL. 04.07, 2014 Defines data required as input for mathematical fire models.

1.1This guide describes data required as input for mathematical fire growth models.

1.2Guidelines are presented on how the data can be obtained.

1.3The emphasis in this guide is on ignition, pyrolysis and flame spread models for solid materials.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6This fire standard cannot be used to provide quantitative measures.

Committee
E 05
DocumentType
Guide
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

14/30301908 DC : 0 BS ISO 16730-1 - FIRE SAFETY ENGINEERING - PROCEDURES AND REQUIREMENTS FOR VERIFICATION AND VALIDATION OF CALCULATION METHODS - PART 1: GENERAL
NFPA 909 : 2017 PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP
NFPA 150 : 2016 FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES
NFPA 914 : 2015 FIRE PROTECTION OF HISTORIC STRUCTURES
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
NFPA 301 : 2018 SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS
NFPA 1 : 2021 FIRE CODE
UNE-ISO 16730-1:2017 Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General
BS ISO 16730-1:2015 Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General
NFPA 101 : 2018 LIFE SAFETY CODE
ISO 16730-1:2015 Fire safety engineering Procedures and requirements for verification and validation of calculation methods Part 1: General
ASTM D 7309 : 2019 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM E 2280 : 2017 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ISO 16730:2008 Fire safety engineering Assessment, verification and validation of calculation methods
ASTM D 7309 : 2013 : REDLINE TEST METHOD FOR DETERMINING FLAMMABILITY CHARACTERISTICS OF PLASTICS AND OTHER SOLID MATERIALS USING MICROSCALE COMBUSTION CALORIMETRY
ASTM E 2280 : 2017 : REDLINE Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
NFPA 1 : 2018 FIRE CODE

ASTM C 1371 : 2004 : REV A : R2010 : EDT 1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1537 : 2016 : REDLINE Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 1354 : 2010 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2058 : 2001 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2058 : 2006 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1354 : 2014 : EDT 1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5865 : 2011 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM C 518 : 2017 : REDLINE Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E 2058 : 2019 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1321 : 1997 : REV A Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E 2257 : 2013 : REV A Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1623 : 2000 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1354 : 2004 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 1999 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1623 : 2014 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1354 : 2010 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 2003 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1537 : 2015 Standard Test Method for Fire Testing of Upholstered Furniture
ASTM D 5865 : 2004 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1623 : 2003 : REV A Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1354 : 2002 : REV D : EDT 1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5865 : 2000 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 5865 : 2013 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1354 : 2008 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5865 : 2007 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 5865 : 2003 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM C 1371 : 1998 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1537 : 2016 Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 1354 : 2002 : REV D Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5865 : 1998 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 5865 : 2003 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1537 : 2002 : REV A Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 906 : 2009 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ASTM E 1623 : 2004 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2257 : 2016 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 2058 : 2002 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1321 : 2008 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM D 5865 : 2013 : REDLINE TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE
ASTM D 5865 : 1999 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1354 : 2009 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2257 : 2013 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 2257 : 2017 : REDLINE Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1623 : 2002 : REV A Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 472 : 1986 PRACTICE FOR REPORTING THERMO-ANALYTICAL DATA
ASTM D 2395 : 1993 : R1997 : EDT 1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 2257 : 2008 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1623 : 2002 : REV B Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM D 2395 : 2007 : REV A Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 1321 : 2018 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E 2058 : 2013 : REV A Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1537 : 2007 Standard Test Method for Fire Testing of Upholstered Furniture
ASTM D 5865 : 2011 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1354 : 2015 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2058 : 2002 : REV A Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1354 : 2016 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 2395 : 2017 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM E 1623 : 2011 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1321 : 2013 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM D 5865 : 2012 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 408 : 2013 : REDLINE Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E 1354 : 2016 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2257 : 2017 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM D 2395 : 2014 : EDT 1 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM C 1371 : 2015 : REDLINE Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 2395 : 2017 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM C 1371 : 2004 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 2395 : 2014 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
ASTM E 1354 : 2017 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1537 : 2002 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E 1354 : 2002 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2257 : 2003 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM D 5865 : 2001 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 2395 : 2006 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 1354 : 2015 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5865 : 2001 : REV A : EDT 1 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1537 : 1999 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E 1354 : 2011 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 2011 : REV B Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2058 : 2000 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2058 : 2009 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D 5865 : 2010 : REV A Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1354 : 2011 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 2395 : 2007 : REV A : EDT 1 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 1623 : 2001 : EDT 1 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM C 1371 : 2004 : REV A Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1537 : 2013 Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 1321 : 2009 Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM D 5865 : 2007 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1537 : 2012 Standard Test Method for Fire Testing of Upholstered Furniture
ASTM D 5865 : 2002 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 5865 : 2001 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 537 : 2012 : REDLINE Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM D 2395 : 2002 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
ASTM E 2058 : 2003 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C 1371 : 2015 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1354 : 2004 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 2013 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 2014 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1537 : 2001 Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E 1623 : 2009 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1354 : 2017 : REDLINE Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1623 : 2016 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1623 : 2016 : REDLINE Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM D 5865 : 2010 : REV A : EDT 1 Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 5865 : 2010 Standard Test Method for Gross Calorific Value of Coal and Coke

View more information
£64.04
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.