• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 29 : 2022

Current

Current

The latest, up-to-date edition.

Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

22-04-2022

1.1This practice is intended to assist the various technical committees in the use of uniform methods of indicating the number of digits which are to be considered significant in specification limits, for example, specified maximum values and specified minimum values. Its aim is to outline methods which should aid in clarifying the intended meaning of specification limits with which observed values or calculated test results are compared in determining conformance with specifications.

1.2This practice is intended to be used in determining conformance with specifications when the applicable ASTM specifications or standards make direct reference to this practice.

1.3Reference to this practice is valid only when a choice of method has been indicated, that is, either absolute method or rounding method.

1.4The system of units for this practice is not specified.Dimensional quantities in the practice are presented only as illustrations of calculation methods.The examples are not binding on products or test methods treated.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 11
DocumentType
Standard Practice
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 1999 : 2018 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
ASTM B 170 : 1999 : R2020 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
ASTM D 5808 : 2020 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
SAE AMS7011:2022 Electron Beam-Powder Bed Fusion (EB-PBF) Produced Preforms and Parts Titanium Alloy, 6Al - 4V Hot Isostatically Pressed
ASTM B 302 : 2017 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM A 635/A635M : 2015 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM F 468M : 2006 : R2018 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
ASTM E 1915 : 2020 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM B 5 : 2016 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
ASTM B 708 : 2012(R2019) Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
ASTM F 29 : 1997 : R2017 Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications
ASTM D 2439 : 2020 Standard Specification for Refined Phenol
ASTM D 6750 : 2019 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
ASTM E 3330 : 2022 Standard Guide for Contents of Documentation and Statistical Treatments for Reference Materials for Metals, Ores, and Related Materials
ASTM B 315 : 2019 Standard Specification for Seamless Copper Alloy Pipe and Tube
ASTM B 573 : 2006 : R2016 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod
ASTM D 6300 : 2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM E 1019 : 2018 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
ASTM D 4734 : 2020 Standard Specification for Refined Benzene-545
ASTM D 5967 : 2021 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
ASTM D 5060 : 2012 : R2021 : EDT 1 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
ASTM D 2837 : 2022 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM B 801 : 2018 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM E 1917 : 2013 : R2018 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
ASTM D 2379 : 2009 : R2017 Standard Test Method for Acidity of Formaldehyde Solutions
ASTM D 2232 : 2014 : R2018 Standard Test Method for Evaporating Residue of Naphthalene
ASTM D 7583 : 2016 Standard Test Method for John Deere Coolant Cavitation Test
ASTM D 4471 : 2018 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
ASTM B 691 : 2018 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Rod, Bar, and Wire
ASTM B 49 : 2020 Standard Specification for Copper Rod for Electrical Purposes
ASTM C 560 : 2020 Standard Test Methods for Chemical Analysis of Graphite
ASTM D 7884 : 2020 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
ASTM D 8247 : 2019 Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection
ASTM A 878/A878M : 2019 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
ASTM E 463 : 2021 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry
ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
ASTM F 1466 : 2020 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
ASTM B 506 : 2016 Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
ASTM D 5871 : 2019 Standard Specification for Benzene for Cyclohexane Feedstock
ASTM F 2384 : 2010 : R2016 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
ASTM E 278 : 2021 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM D 7239 : 2013 : R2018 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
ASTM B 725 : 2022 Standard Specification for Welded Nickel and Nickel Copper Alloy Pipe
ASTM D 8207 : 2018 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry (Withdrawn 2023)
ASTM D 3735 : 2022 Standard Specification for VM&P Naphthas
ASTM D 8275 : 2021 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
ASTM F 1624 : 2012 : R2018 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM B 241/B241M : 2016 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
ASTM B 561 : 1994 : R2018 Standard Specification for Refined  Platinum
ASTM A 6/A6M : 2021 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ASTM B 80 : 2015 Standard Specification for Magnesium-Alloy Sand Castings
ASTM B 400/B400M : 2019 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM B 1009 : 2020 Standard Specification for Titanium Alloy Bars for Near Surface Mounts in Civil Structures
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM D 1614 : 2009 : R2017 Standard Test Method for Alkalinity in Acetone
ASTM D 8114 : 2022 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
ASTM B 950 : 2021 : EDT 1 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
ASTM E 353 : 2019 : EDT 1 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM F 2989 : 2021 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications
ASTM D 7536 : 2020 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM B 228 : 2011 : REV A : R2021 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM A 231/A231M : 2018 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
ASTM B 393 : 2018 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
ASTM A 853 : 2019 Standard Specification for Steel Wire, Carbon, for General Use
ASTM D 6367 : 2021 Standard Specification for AMS (α-Methylstyrene)
ASTM E 1277 : 2014 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2190 : 2007 : R2021 Standard Specification for Vinyl Acetate
ASTM B 408 : 2006 : R2016 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
ASTM D 2340 : 2018 Standard Test Method for Peroxides in Styrene Monomer
ASTM B 216 : 2016 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes
ASTM B 804 : 2002 : R2018 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
ASTM F 30 : 1996 : R2017 Standard Specification for Iron-Nickel Sealing Alloys
ASTM B 403 : 2020 Standard Specification for Magnesium-Alloy Investment Castings
ASTM B 413 : 1997 : REV A : R2021 Standard Specification for Refined Silver
ASTM C 114 : 2018 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM E 389 : 2021 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No.4) Sieve and Coarser for Metal-Bearing Ores and Related Materials
ASTM B 608 : 2018 Standard Specification for Welded Copper-Alloy Pipe
ASTM D 7011 : 2015 : R2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM E 363 : 2016 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
ASTM D 2194 : 2022 Standard Test Method for Concentration of Formaldehyde Solutions
ASTM E 202 : 2018 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM D 3505 : 2018 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023)
ASTM B 884 : 2011 : R2019 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
ASTM F 2924 : 2014 : R2021 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
ASTM E 367 : 2016 Standard Test Methods for Chemical Analysis of Ferroniobium
ASTM B 543/B543M : 2018 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
ASTM B 569 : 2019 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing
ASTM D 8044 : 2016 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D 910 : 2021 Standard Specification for Leaded Aviation Gasolines
ASTM B 37 : 2018 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
ASTM D 1133 : 2013 : R2021 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
ASTM B 394 : 2018 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
ASTM D 8039 : 2016 Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
ASTM F 2581 : 2012 : R2017 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
ASTM B 43 : 2020 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM E 2050 : 2017 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
ASTM B 129 : 2017 Standard Specification for Cartridge Brass Cartridge Case Cups
ASTM F 79 : 1969(R2019) Standard Specification for Type 101 Sealing Glass
ASTM D 8076 : 2021 : REV B Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D 6709 : 2022 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
ASTM B 670 : 2007 : R2018 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
ASTM D 3128 : 2007 : R2021 Standard Specification for 2-Methoxyethanol
ASTM D 3394 : 2016 Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM E 70 : 2019 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM B 907 : 2016 : R2021 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
ASTM B 88M : 2020 Standard Specification for Seamless Copper Water Tube (Metric)
ASTM D 1153 : 2022 Standard Specification for Methyl Isobutyl Ketone
ASTM D 7566 : 2021 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 7920 : 2021 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
ASTM E 2242 : 2021 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM E 1587 : 2017 Standard Test Methods for Chemical Analysis of Refined Nickel
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM F 836M : 2020 Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) (Withdrawn 2023)
ASTM A 872/A872M : 2021 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
ASTM A 370 : 2021 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM D 4367 : 2022 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
ASTM D 1078 : 2011 : R2019 Standard Test Method for Distillation Range of Volatile Organic Liquids
ASTM A 53/A53M : 2020 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM D 7881 : 2020 : EDT 1 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
ASTM E 2295 : 2021 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels
ASTM E 536 : 2016 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ASTM B 365 : 2012(R2019) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
ASTM D 331 : 2011 : R2019 Standard Specification for 2-Ethoxyethanol<sup>,</sup>
ASTM B 815 : 2002 : R2016 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy<brk/> (UNS R31233) Rod
ASTM D 7090 : 2004 : R2018 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
ASTM B 339 : 2019 Standard Specification for Pig Tin
ASTM D 4101 : 2017 : EDT 1 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
ASTM D 1353 : 2013 : R2021 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM A 568/A568M : 2019 : REV A Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM B 483/B483M : 2021 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
ASTM D 7862 : 2021 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 770 : 2011 : R2019 Standard Specification for Isopropyl Alcohol<sup>,</sup>
ASTM E 2294 : 2021 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry
ASTM D 8301 : 2021 Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method
ASTM E 3237 : 2019 Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications
ASTM B 1003 : 2016 Standard Specification for Seamless Copper Tube for Linesets
ASTM A 252/A252M : 2019 Standard Specification for Welded and Seamless Steel Pipe Piles
ASTM A 957/A957M : 2021 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM B 265 : 2020 : REV A Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM D 8226 : 2021 : REV A Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine<rangeref></rangeref >
ASTM B 760 : 2007 : R2019 Standard Specification for Tungsten Plate, Sheet, and Foil
ASTM F 1083 : 2018 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
ASTM E 1641 : 2018 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D 3366 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
ASTM F 1580 : 2018 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM D 8165 : 2021 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
ASTM D 8063 : 2018 Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
ASTM B 160 : 2005 : R2019 Standard Specification for Nickel Rod and Bar
ASTM B 26/B26M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Sand Castings
ASTM B 316/B316M : 2020 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM A 749/A749M : 2014 : R2021 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM B 746/B746M : 2016 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM D 1209 : 2005 : R2019 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM B 231/B231M : 2016 : R2021 Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
ASTM D 4549 : 2015 : R2021 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D 3376 : 2018 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D 8032 : 2020 Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
ASTM D 7359 : 2018 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM E 878 : 2020 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
ASTM D 8130 : 2017 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
ASTM F 2232 : 2014 : R2020 Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
ASTM E 1120 : 2021 Standard Specification for Liquid Chlorine
ASTM G 67 : 2018 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM D 202 : 2017 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D 4493 : 2020 Standard Test Method for Solidification Point of Bisphenol A<brk/>(4,4<emph type="ital" >′</emph>-Isopropylidenediphenol)
ASTM D 7057 : 2018 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
ASTM D 2885 : 2021 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 5310 : 2010 : R2018 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography
ASTM D 8235 : 2021 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM A 1003/A1003M : 2015 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM B 640 : 2012 : REV A : R2021 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service
ASTM B 86 : 2018 : EDT 1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
ASTM F 620 : 2020 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition
ASTM B 897 : 2018 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
ASTM A 90/A90M : 2021 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM D 4802 : 2016 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
ASTM A 817 : 2012 : R2017 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
ASTM D 4895 : 2018 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D 1686 : 2019 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM F 562 : 2022 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
ASTM D 6205 : 2020 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM D 3329 : 2003 : R2017 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM B 988 : 2018 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
ASTM D 7156 : 2019 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
ASTM D 5135 : 2021 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
ASTM B 324 : 2001 : R2021 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
ASTM B 997 : 2016 : R2021 Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
ASTM B 643 : 2018 Standard Specification for Copper-Beryllium Alloy Seamless Tube
ASTM E 1367 : 2003 : R2014 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM F 1537 : 2020 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
ASTM D 933 : 2020 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM B 560 : 2020 Standard Specification for Modern Pewter Alloys
ASTM D 7216 : 2022 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
ASTM D 7719 : 2021 : REV A Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel
ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 7468 : 2021 Standard Test Method for Cummins ISM Test
ASTM E 372 : 2021 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titrimetry
ASTM E 92 : 2017 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM A 135/A135M : 2021 Standard Specification for Electric-Resistance-Welded Steel Pipe
ASTM D 596 : 2001 : R2018 Standard Guide for Reporting Results of Analysis of Water
ASTM B 719 : 2020 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
ASTM D 5704 : 2022 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
ASTM B 672 : 2002 : R2018 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire (Withdrawn 2023)
ASTM D 5205 : 2016 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
ASTM B 783 : 2019 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
ASTM B 637 : 2018 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
ASTM D 4985 : 2010 : R2015 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
ASTM B 824 : 2017 Standard Specification for General Requirements for Copper Alloy Castings
ASTM D 2193 : 2022 Standard Test Method for Hydroquinone in Vinyl Acetate
ASTM B 682 : 2001 : R2016 Standard Specification for Standard Metric Sizes of Electrical Conductors
ASTM D 1007 : 2011 : R2019 Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup>
ASTM B 786/B786M : 2008 : R2018 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
ASTM B 387 : 2018 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
ASTM D 1363 : 2006 : R2019 Standard Test Method for Permanganate Time of Acetone and Methanol
ASTM B 606/B606M : 2019 Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced
ASTM C 721 : 2020 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM B 805 : 2006 : R2017 : EDT 1 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
ASTM E 2465 : 2019 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM B 843 : 2018 : EDT 1 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
ASTM F 2527 : 2016 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
ASTM F 139 : 2019 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
ASTM D 4000 : 2020 Standard Classification System for Specifying Plastic Materials
ASTM D 5927 : 2017 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
ASTM B 42 : 2020 Standard Specification for Seamless Copper Pipe, Standard Sizes
ASTM B 418 : 2016 : REV A : R2021 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
ASTM D 7951 : 2020 Standard Specification for Disproportionation (TDP) Toluene
ASTM F 2282 : 2018 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM B 564 : 2019 Standard Specification for Nickel Alloy Forgings
ASTM B 373 : 2019 Standard Specification for Aluminum Foil for Capacitors
ASTM F 593 : 2017 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM D 7220 : 2012 : R2017 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 3622 : 2011 : R2019 Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol)
ASTM D 8111 : 2021 : REV A Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D 2087 : 2022 Standard Test Method for Iron in Formaldehyde Solutions
ASTM B 750 : 2016 Standard Specification for GALFAN
ASTM D 330 : 2007 : R2021 Standard Specification for 2-Butoxyethanol
ASTM A 1018/A1018M : 2018 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D 7184 : 2020 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM B 523/B523M : 2018 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes
ASTM D 843 : 2019 Standard Specification for Nitration Grade Xylene
ASTM F 1295 : 2016 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
ASTM D 6891 : 2021 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
ASTM D 4349 : 2016 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
ASTM D 7422 : 2022 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
ASTM B 749 : 2020 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
ASTM F 3055 : 2014 : REV A : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM D 4077 : 2017 Standard Specification for Cumene (Isopropylbenzene)
ASTM A 985/A985M : 2021 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
ASTM D 3935 : 2021 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D 8065/D8065M : 2016 Standard Classification System and Basis for Specification for Specifying Plastic Films
ASTM A 1035/A1035M : 2020 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM A 854/A854M : 2008 : R2017 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM D 8291 : 2021 : REV A Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
ASTM E 74 : 2018 : EDT 1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM D 7038 : 2022 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
ASTM D 975 : 2021 Standard Specification for Diesel Fuel
ASTM D 1655 : 2021 : REV C Standard Specification for Aviation Turbine Fuels
ASTM B 800 : 2005 : R2021 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM B 686/B686M : 2018 Standard Specification for Aluminum Alloy Castings, High-Strength
ASTM A 227/A227M : 2017 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
ASTM E 352 : 2018 : EDT 1 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
ASTM A 924/A924M : 2022 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM D 4565 : 2020 Standard Test Methods for Physical and Environmental Performance Properties of <brk/>Insulations and Jackets for Telecommunications Wire and Cable
ASTM A 818 : 2006 : R2021 Standard Specification for Coppered Carbon Steel Wire
ASTM A 761/A761M : 2018 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM B 989 : 2019 : REV A Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM B 857 : 2018 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
ASTM E 2823 : 2017 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM E 2470 : 2009 : R2015 : EDT 1 Standard Specification for Polyester Grade Ethylene Glycol
ASTM D 5662 : 2019 : REV A Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
ASTM B 775/B775M : 2022 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
ASTM D 4634 : 2016 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
ASTM B 247 : 2020 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM D 7547 : 2021 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
ASTM F 799 : 2019 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
ASTM F 2847 : 2017 Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments
ASTM E 2296 : 2021 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry
ASTM D 5136 : 2019 Standard Specification for High Purity <emph type="ital">p</emph>-Xylene
ASTM D 3760 : 2018 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (Withdrawn 2022)
ASTM E 1119 : 2009 : R2015 : EDT 1 Standard Specification for Industrial Grade Ethylene Glycol
ASTM D 3032 : 2021 : REV A Standard Test Methods for Hookup Wire Insulation
ASTM F 68 : 2016 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
ASTM D 7125 : 2017 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
ASTM B 987/B987M : 2020 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
ASTM C 1630 : 2019 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
ASTM B 562 : 1995 : R2021 Standard Specification for Refined Gold
ASTM B 862 : 2019 Standard Specification for Titanium and Titanium Alloy Welded Pipe
ASTM C 996 : 2020 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % <sup > 235</sup>U
ASTM D 608 : 2005 : R2019 Standard Specification for Dibutyl Phthalate
ASTM B 425 : 2019 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar
ASTM D 3160 : 2020 : REV A Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
ASTM D 1836 : 2007 : R2021 Standard Specification for Commercial Hexanes
ASTM F 901 : 2020 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM B 616 : 1996 : R2018 Standard Specification for Refined Rhodium
ASTM E 354 : 2021 : EDT 1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
ASTM D 4976 : 2012 : REV A : R2020 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D 3545 : 2022 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
ASTM B 952/B952M : 2019 Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
ASTM D 7185 : 2019 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
ASTM F 560 : 2022 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
ASTM B 944 : 2011 : R2016 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)
ASTM D 2804 : 2022 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
ASTM D 7871 : 2019 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM B 131 : 2017 Standard Specification for Copper Alloy Bullet Jacket Cups
ASTM B 234 : 2017 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers
ASTM A 228/A228M : 2018 Standard Specification for Steel Wire, Music Spring Quality
ASTM B 166 : 2019 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
ASTM A 407 : 2018 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
ASTM B 649 : 2021 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloy and Cr-Ni-Fe-N <brk/>Low-Carbon Alloy Bar and Wire, Ni-Cr-Fe-Mo-N Alloy Wire, and Ni-Fe-Cr-Mo-N Alloy Bar
ASTM B 928/B928M : 2015 Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM B 221 : 2021 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM C 1365 : 2018 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM D 3244 : 2021 : REV A Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM B 557M : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM D 7549 : 2021 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
ASTM D 1492 : 2021 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
ASTM D 8195 : 2018 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting
ASTM B 163 : 2022 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
ASTM D 8221 : 2018 : REV A : EDT 1 Standard Practice for Determining the Calculated Methane Number (MN<inf>C</inf>) of Gaseous Fuels Used in Internal Combustion Engines
ASTM B 93/B93M : 2021 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
ASTM D 7504 : 2021 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM B 29 : 2019 Standard Specification for Refined Lead
ASTM D 4735 : 2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
ASTM B 618/B618M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Investment Castings
ASTM F 3273 : 2017 : R2021 : EDT 1 Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700)
ASTM B 248 : 2017 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM D 5606 : 2019 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock
ASTM D 5137 : 2007 : R2021 Standard Specification for Hexyl Acetate
ASTM D 2359 : 2019 Standard Specification for Refined Benzene-535
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E 2624 : 2017 Standard Practice for Torque Calibration of Testing Machines
ASTM D 6142 : 2021 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
ASTM E 2428 : 2015 : REV A Standard Practice for Calibration and Verification of Torque Transducers
ASTM A 834 : 1995 : R2020 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
ASTM D 4066 : 2013 : R2019 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM B 32 : 2020 Standard Specification for Solder Metal
ASTM D 5857 : 2017 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ASTM B 306 : 2020 Standard Specification for Copper Drainage Tube (DWV)
ASTM B 856 : 2018 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
ASTM B 101 : 2012 : R2019 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
ASTM B 364 : 2018 Standard Specification for Tantalum and Tantalum Alloy Ingots
ASTM B 829 : 2019 : REV A Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
ASTM D 7704 : 2016 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
ASTM A 706/A706M : 2016 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
ASTM B 802/B802M : 2019 Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM A 1057/A1057M : 2008 : R2019 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM D 5138 : 2016 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
ASTM D 4566 : 2020 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
ASTM B 819 : 2019 Standard Specification for Seamless Copper Tube for Medical Gas Systems
ASTM B 280 : 2020 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
ASTM B 836 : 2000 : R2021 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
ASTM F 67 : 2013 : R2017 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
ASTM B 372 : 2017 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
ASTM D 2121 : 2016 Standard Test Methods for Polymer Content of Styrene Monomer
ASTM B 778 : 2019 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
ASTM A 1025/A1025M : 2010 : R2020 Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements
ASTM E 1950 : 2017 Standard Practice for Reporting Results from Methods of Chemical Analysis (Withdrawn 2023)
ASTM F 105 : 1972(R2019) Standard Specification for Type 58 Borosilicate Sealing Glass
ASTM B 943 : 2016 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
ASTM D 1073 : 2016 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures
ASTM D 6394 : 2021 : REV A Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)
ASTM B 550/B550M : 2007 : R2019 Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
ASTM D 6923 : 2018 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
ASTM D 2693 : 2022 Standard Specification for Ethylene Glycol
ASTM B 308/B308M : 2020 Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
ASTM E 1568 : 2021 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
ASTM A 229/A229M : 2018 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
ASTM B 359/B359M : 2018 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
ASTM A 641/A641M : 2019 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
ASTM B 429/B429M : 2020 Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
ASTM E 350 : 2018 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
ASTM C 1005 : 2020 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
ASTM F 31 : 2021 Standard Specification for Nickel-Chromium-Iron Sealing Alloys
ASTM D 4590 : 2018 Standard Test Method for Colorimetric Determination of <emph type="ital">p-tert</emph >-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM E 1600 : 2015 Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM D 7193 : 2017 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM F 3042 : 2013 : R2018 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
ASTM B 381 : 2021 Standard Specification for Titanium and Titanium Alloy Forgings
ASTM D 2119 : 2019 Standard Test Method for Aldehydes in Styrene Monomer
ASTM A 809 : 2008 : R2017 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
ASTM E 291 : 2018 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
ASTM D 5164 : 2005 : R2019 Standard Specification for Propylene Glycol and Dipropylene Glycol
ASTM E 345 : 2016 Standard Test Methods of Tension Testing of Metallic Foil
ASTM D 3257 : 2022 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
ASTM D 473 : 2007 : R2017 : EDT 1 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM F 2229 : 2021 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
ASTM F 468 : 2016 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM D 2634 : 2007 : R2021 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D 4814 : 2021 : REV C Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM D 2270 : 2010 : R2016 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
ASTM B 94 : 2018 Standard Specification for Magnesium-Alloy Die Castings
ASTM A 530/A530M : 2018 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
ASTM B 335 : 2003 : R2018 Standard Specification for Nickel-Molybdenum Alloy Rod
ASTM F 3160 : 2021 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ASTM D 5983 : 2021 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 815 : 2017 : REV B Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry
ASTM D 4360 : 2011 : R2019 Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone
ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM D 4806 : 2021 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM B 338 : 2017 : R2021 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
ASTM B 982 : 2020 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM E 1834 : 2018 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM B 392 : 2018 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
ASTM D 5336 : 2021 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials
ASTM B 258 : 2018 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM D 2917 : 2007 : R2021 Standard Specification for Methyl Isoamyl Ketone
ASTM E 1229 : 2021 Standard Specification for Calcium Hypochlorite
ASTM B 551/B551M : 2012 : R2021 Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
ASTM B 498/B498M : 2019 Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
ASTM E 581 : 2017 : REV A Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
ASTM B 395/B395M : 2018 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
ASTM D 1718 : 2009 : R2017 Standard Specification for Isobutyl Acetate (95 % Grade)
ASTM B 251/B251M : 2017 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
ASTM E 351 : 2018 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
ASTM D 4789 : 2020 : EDT 1 Standard Test Method for Solution Color of Bisphenol A (4,4<emph type="ital">′</emph >-Isopropylidenediphenol)
ASTM F 90 : 2014 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
ASTM D 6026 : 2021 Standard Practice for Using Significant Digits and Data Records in Geotechnical Data
ASTM D 5990 : 2020 : REV A Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
ASTM E 508 : 2021 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM A 856/A856M : 2003 : R2020 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
ASTM D 8350 : 2021 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
ASTM B 690 : 2018 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08367) Seamless Pipe and Tube
ASTM A 451/A451M : 2020 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
ASTM D 7360 : 2016 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023)
ASTM D 8005 : 2018 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM B 903 : 2015 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM D 1613 : 2017 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 6984 : 2018 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
ASTM F 1377 : 2021 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Medical Devices (UNS R30075, UNS R31537, and UNS R31538)
ASTM B 130 : 2019 Standard Specification for Commercial Bronze Strip for Bullet Jackets
ASTM E 2575 : 2019 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
ASTM D 5006 : 2011 : R2021 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 8349 : 2021 Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints Between Different Materials for the Production of End Items or Parts that are Intended to be Disassembled and/or Reassembled
ASTM D 6835 : 2017 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
ASTM B 960 : 2018 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
ASTM D 5436 : 2015 : R2020 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
ASTM D 4067 : 2021 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM B 164 : 2003 : R2019 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
ASTM F 3001 : 2014 : R2021 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
ASTM D 3734 : 2005 : R2018 Standard Specification for High-Flash Aromatic Naphthas
ASTM D 788 : 2016 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
ASTM D 6121 : 2019 : REV A Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM A 1058 : 2019 Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM D 3893 : 2003 : R2017 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
ASTM E 279 : 2018 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets, Lump, and Sinter by the Tumbler Test
ASTM D 7589 : 2016 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref >
ASTM B 209/B209M : 2021 : REV A Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B 367 : 2022 Standard Specification for Titanium and Titanium Alloy Castings
ASTM B 848/B848M : 2021 Standard Specification for Powder Forged (PF) Ferrous Materials
ASTM B 595 : 2021 Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts
ASTM D 6615 : 2015 : REV A : R2019 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM A 615/A615M : 2020 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM B 792 : 2016 : R2021 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
ASTM F 961 : 2020 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
ASTM B 655/B655M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Bar and Wire
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 248 : 2020 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM E 806 : 2021 Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
ASTM B 249/B249M : 2020 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
ASTM E 1251 : 2017 : REV A Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM D 4614 : 2011 : R2019 Standard Specification for Ethyl Acetate (All Grades)
ASTM F 1472 : 2020 : REV A Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
ASTM D 5740 : 2018 Standard Guide for Writing Material Standards in the Classification D4000 Format
ASTM D 7266 : 2013 : R2018 : EDT 1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM E 1473 : 2016 Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
ASTM A 401/A401M : 2018 Standard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM B 524/B524M : 2018 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)
ASTM B 687 : 1999 : R2016 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
ASTM B 688 : 2018 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08367) Plate, Sheet, and Strip
ASTM D 7883 : 2020 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
ASTM B 508 : 2016 Standard Specification for Copper Alloy Strip for Flexible Metal Hose
ASTM D 6557 : 2018 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
ASTM A 955/A955M : 2020 : REV C Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
ASTM A 764 : 2007 : R2021 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A 781/A781M : 2021 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
ASTM E 252 : 2006 : R2021 : EDT 1 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
ASTM D 5211 : 2019 Standard Specification for Xylenes for <emph type="ital">p</emph>-Xylene Feedstock
ASTM F 467 : 2013 : R2018 Standard Specification for Nonferrous Nuts for General Use
ASTM A 109/A109M : 2016 : R2018 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
ASTM A 232/A232M : 2018 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
ASTM C 25 : 2019 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM B 609/B609M : 2012 : R2021 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B 671 : 1981 : R2021 Standard Specification for Refined Iridium
ASTM D 396 : 2021 Standard Specification for Fuel Oils
ASTM D 841 : 2019 Standard Specification for Nitration Grade Toluene
ASTM E 439 : 2017 Standard Test Methods for Chemical Analysis of Beryllium
ASTM B 23 : 2020 Standard Specification for White Metal Bearing Alloys<brk/> (Known Commercially as “Babbitt Metal”)
ASTM D 5917 : 2015 : R2019 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM B 69 : 2021 Standard Specification for Rolled Zinc
ASTM B 743 : 2012 : R2020 Standard Specification for Seamless Copper Tube in Coils
ASTM E 3246 : 2021 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM F 75 : 2018 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
ASTM D 7223 : 2021 Standard Specification for Aviation Certification Turbine Fuel
ASTM B 432 : 2019 Standard Specification for Copper and Copper Alloy Clad Steel Plate
ASTM D 7467 : 2020 : REV A Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
ASTM D 4416 : 2009 : R2017 Standard Specification for Acrylic Acid
ASTM B 861 : 2019 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
ASTM D 8087 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
ASTM E 2867 : 2014 : R2019 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM B 479 : 2019 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM D 7320 : 2018 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 7436 : 2017 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM E 3047 : 2016 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM F 1062 : 1997 : R2018 Standard Test Method for Verification of Ski Binding Test Devices
ASTM B 443 : 2019 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
ASTM B 830 : 2018 Standard Specification for Uniform Test Methods and Frequency
ASTM B 317/B317M : 2007 : R2015 : EDT 1 Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
ASTM F 519 : 2018 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
ASTM B 652/B652M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Ingots
ASTM E 738 : 2020 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry
ASTM E 465 : 2011 : R2017 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
ASTM D 5201 : 2005 : REV A : R2020 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM D 5204 : 2019 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
ASTM D 8033 : 2016 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM D 235 : 2022 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
ASTM E 2409 : 2020 : REV A Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol<brk/>(Gas Chromatographic Method)
ASTM B 162 : 1999 : R2019 Standard Specification for Nickel Plate, Sheet, and Strip
ASTM E 1938 : 2013 : R2018 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM D 2699 : 2021 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM B 969/B969M : 2018 : EDT 1 Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
ASTM D 3180 : 2015 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM F 621 : 2012 : R2021 : EDT 1 Standard Specification for Stainless Steel Forgings for Surgical Implants
ASTM B 236 : 2007 : R2015 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
ASTM B 439 : 2021 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM D 8062 : 2022 Standard Specification for Purified Terephthalic Acid (PTA) with Low <emph type="ital" >p</emph>-Toluic Acid
ASTM D 6778 : 2020 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
ASTM E 1805 : 2021 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM B 863 : 2019 Standard Specification for Titanium and Titanium Alloy Wire
ASTM B 1005 : 2017 Standard Specification for Copper-Clad Aluminum Bar for Electrical Purposes (Bus Bar)
ASTM E 572 : 2021 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM B 379 : 2020 Standard Specification for Phosphorized Coppers—Refinery Shapes
ASTM B 511/B511M : 2021 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
ASTM D 5194 : 2018 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
ASTM E 1898 : 2021 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
ASTM B 711 : 2018 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
ASTM B 1002 : 2016 : R2020 Standard Specification for Refined Indium
ASTM B 248M : 2017 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
ASTM B 581 : 2017 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
ASTM F 2980 : 2013 : R2017 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM F 2063 : 2018 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
ASTM D 7960 : 2021 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
ASTM D 2915 : 2017 : R2022 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM B 446 : 2019 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar
ASTM A 148/A148M : 2020 : EDT 1 Standard Specification for Steel Castings, High Strength, for Structural Purposes
ASTM E 396 : 2017 Standard Test Methods for Chemical Analysis of Cadmium
ASTM B 438 : 2021 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
ASTM F 136 : 2013 : R2021 : EDT 1 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
ASTM E 1835 : 2014 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
ASTM D 740 : 2011 : R2019 Standard Specification for Methyl Ethyl Ketone<sup>,</sup>
ASTM B 658/B658M : 2011 : R2020 Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
ASTM C 1494 : 2013 : R2018 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
ASTM D 1257 : 2022 Standard Specification for High-Gravity Glycerin
ASTM B 793 : 2016 : R2021 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
ASTM B 837 : 2019 Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
ASTM F 2885 : 2017 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
ASTM B 352/B352M : 2017 : R2021 Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application
ASTM E 2792 : 2021 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM B 107/B107M : 2013 : R2021 Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire
ASTM E 1070 : 2017 : REV A Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
ASTM B 958/B958M : 2019 Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM D 3965 : 2021 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
ASTM D 4673 : 2016 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
ASTM A 1113/A1113M : 2020 : EDT 1 Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM B 779 : 2018 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
ASTM D 1364 : 2022 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D 5713 : 2014 : R2018 : EDT 1 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
ASTM D 7994 : 2017 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM F 2146 : 2022 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
ASTM D 6247 : 2018 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6792 : 2021 : REV C Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM B 860 : 2018 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
ASTM B 247M : 2020 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
ASTM B 48 : 2000 : R2021 : EDT 1 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
ASTM D 6338 : 2017 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
ASTM F 2181 : 2020 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
ASTM D 632 : 2012 : R2020 : EDT 1 Standard Specification for Sodium Chloride
ASTM D 7715 : 2012 : R2021 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
ASTM D 3130 : 2011 : R2019 Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade)
ASTM E 1085 : 2016 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D 6779 : 2021 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ASTM B 237 : 2020 Standard Specification for Refined Antimony
ASTM B 240 : 2021 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM E 247 : 2021 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM B 167 : 2018 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Seamless Pipe and Tube
ASTM B 557 : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM D 5386 : 2016 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D 6875 : 2018 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
ASTM B 491/B491M : 2015 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ASTM E 10 : 2018 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM B 188 : 2015 : EDT 1 Standard Specification for Seamless Copper Bus Pipe and Tube
ASTM E 539 : 2019 Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM C 1642 : 2020 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
ASTM D 8031 : 2016 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
ASTM B 901 : 2004 : R2021 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
ASTM B 957/B957M : 2019 Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors
ASTM F 2617 : 2015 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM E 1097 : 2012 : R2017 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
ASTM B 19 : 2020 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
ASTM B 391 : 2018 Standard Specification for Niobium and Niobium Alloy Ingots
ASTM B 718 : 2022 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Plate
ASTM E 382 : 2020 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets and Direct-Reduced Iron
ASTM D 1631 : 2010 : R2018 : EDT 1 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
ASTM D 2827 : 2019 Standard Specification for Styrene Monomer
ASTM D 7124 : 2019 Standard Specification for Benzene for Use with Zeolite Based Catalysts
ASTM B 92/B92M : 2017 Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
ASTM B 399/B399M : 2004 : R2021 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
ASTM D 850 : 2021 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
ASTM D 4615 : 2022 Standard Specification for <emph type="ital">n</emph>-Butyl Acetate (All Grades)
ASTM B 956 : 2019 : EDT 1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
ASTM B 234M : 2017 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric)
ASTM B 906 : 2019 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 221M : 2021 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
ASTM F 3046 : 2021 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
ASTM D 5612 : 1994 : R2018 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM D 2086 : 2022 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
ASTM D 5399 : 2009 : R2017 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM B 350/B350M : 2011 : R2021 Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
ASTM D 2700 : 2022 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
ASTM D 6358 : 2019 : EDT 1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
ASTM B 210/B210M : 2019 : REV A Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM D 7484 : 2021 : REV B Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
ASTM D 3131 : 2007 : R2021 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM B 349/B349M : 2016 : R2021 Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application
ASTM E 18 : 2020 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM D 2694 : 2005 : R2019 Standard Specification for Diethylene Glycol<sup>,</sup>
ASTM A 877/A877M : 2017 Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
ASTM F 2281 : 2004 : R2017 Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
ASTM B 621 : 2021 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy Rod
ASTM D 852 : 2020 Standard Test Method for Solidification Point of Benzene
ASTM A 510/A510M : 2020 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
ASTM E 2994 : 2021 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM D 2191 : 2022 Standard Test Method for Acetaldehyde Content of Vinyl Acetate
ASTM D 6339 : 2011 : R2019 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM B 574 : 2018 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
ASTM D 6143 : 2018 Standard Test Method for Iron Content of Bisphenol A (4,4<emph type="bdit">′</emph > - Isopropylidenediphenol)
ASTM D 1617 : 2022 Standard Test Method for Ester Value of Solvents and Thinners
ASTM B 644 : 2011 : R2017 Standard Specification for Copper Alloy Addition Agents
ASTM B 30 : 2020 Standard Specification for Copper Alloys in Ingot and Other Remelt Forms
ASTM F 1091 : 2020 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
ASTM B 90/B90M : 2021 Standard Specification for Magnesium-Alloy Sheet and Plate
ASTM C 110 : 2020 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM D 8434 : 2021 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive
ASTM B 737 : 2010 : R2021 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
ASTM D 3193 : 2019 Standard Specification for Ethylbenzene
ASTM B 229 : 2012 : R2017 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
ASTM D 6229 : 2006 : R2018 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
ASTM F 1586 : 2021 Standard Specification for Wrought Nitrogen Strengthened 21Chromium—10Nickel—3Manganese—2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
ASTM B 865 : 2020 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy<brk/> Bar, Rod, Wire, Forgings, and Forging Stock
ASTM A 1031/A1031M : 2012 : R2017 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
ASTM D 6144 : 2022 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
ASTM B 232/B232M : 2017 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
ASTM D 6227 : 2018 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
ASTM B 401 : 2012 : R2021 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
ASTM A 684/A684M : 2017 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
ASTM D 1969 : 2022 Standard Specification for 2-Ethylhexanol
ASTM F 2576 : 2015 : REV A Standard Terminology Relating to Declarable Substances in Materials (Withdrawn 2024)
ASTM B 111/B111M : 2018 : REV A Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
ASTM B 476 : 2021 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials
ASTM B 776 : 2012 : R2019 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate
ASTM D 304 : 2011 : R2019 Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol)
ASTM D 2633 : 2021 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
ASTM D 6865 : 2017 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
ASTM B 1013 : 2022 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy Thin Wall Die Castings
ASTM F 2066 : 2018 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
ASTM B 599 : 2020 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
ASTM B 751 : 2021 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
ASTM B 168 : 2019 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip
ASTM B 91 : 2017 Standard Specification for Magnesium-Alloy Forgings
ASTM B 717 : 1996 : R2018 Standard Specification for Refined Ruthenium
ASTM E 667 : 1998 : R2017 Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers (Withdrawn 2022)
ASTM G 2/G2M : 2019 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
ASTM E 415 : 2021 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM F 1108 : 2021 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
ASTM E 2594 : 2020 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
ASTM B 386/B386M : 2019 : EDT 1 Standard Specification for Molybdenum and Molybdenum Alloy Plate,<brk/>Sheet, Strip, Foil, and Ribbon
ASTM B 549 : 2018 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
ASTM B 955/B955M : 2018 Standard Specification for Aluminum-Alloy Centrifugal Castings
ASTM A 20/A20M : 2020 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
ASTM D 3620 : 2004 : R2017 Standard Specification for Glacial Acetic Acid
ASTM D 6721 : 2001 : R2015 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
ASTM D 4025 : 2018 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM D 8237 : 2021 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
ASTM E 507 : 2021 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
ASTM E 2824 : 2018 : REV A Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
ASTM D 3546 : 2005 : R2019 Standard Test Method for Formic Acid in Glacial Acetic Acid
ASTM B 494/B494M : 2008 : R2020 Standard Specification for Primary Zirconium
ASTM B 572 : 2006 : R2016 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
ASTM B 872 : 2019 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
ASTM B 88 : 2020 Standard Specification for Seamless Copper Water Tube
ASTM A 1034/A1034M : 2010 : REV A : R2015 Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM B 654/B654M : 2010 : R2018 Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
ASTM F 2886 : 2017 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
ASTM D 7183 : 2018 : REV A : EDT 1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM B 327 : 2021 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
ASTM E 766 : 2014(R2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM E 478 : 2008 : R2017 Standard Test Methods for Chemical Analysis of Copper Alloys
ASTM F 1813 : 2021 Standard Specification for Wrought Titanium-12Molybdenum-6Zirconium-2Iron Alloy for Surgical Implant (UNS R58120)
ASTM F 594 : 2009 : R2020 Standard Specification for Stainless Steel Nuts
ASTM E 2313 : 2021 : REV A Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
ASTM A 713 : 2004 : R2017 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
ASTM B 645 : 2021 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B 440 : 2012 : R2021 Standard Specification for Cadmium
ASTM D 329 : 2007 : R2021 Standard Specification for Acetone
ASTM A 1097 : 2016 Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)
ASTM D 8074 : 2022 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
ASTM B 211/B211M : 2019 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
ASTM B 447 : 2012 : REV A : R2021 Standard Specification for Welded Copper Tube
ASTM B 294 : 2022 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM D 2378 : 2022 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited
ASTM E 314 : 2016 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
ASTM D 5309 : 2017 Standard Specification for Cyclohexane 999
ASTM B 236M : 2007 : R2015 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024)
ASTM A 679/A679M : 2017 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
ASTM A 524/A524M : 2021 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASTM E 140 : 2012 : REV B : R2019 : EDT 1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM F 688 : 2019 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
ASTM D 7212 : 2013 : R2018 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
ASTM A 428/A428M : 2021 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM B 351/B351M : 2013 : R2018 Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
ASTM E 276 : 2021 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No. 4) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM D 5471 : 2018 Standard Specification for O-Xylene 980
ASTM D 3306 : 2021 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 7358 : 2007 : R2018 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
ASTM D 8085 : 2017 Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
ASTM B 171/B171M : 2018 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
ASTM C 150/C150M : 2021 Standard Specification for Portland Cement
ASTM B 330 : 2020 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
ASTM B 978/B978M : 2021 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum Matrix Composite Reinforced (ACAMCR), Formerly ACCR
ASTM B 1014 : 2020 Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
ASTM F 1350 : 2015 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
ASTM C 1009 : 2021 Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
ASTM B 165 : 2019 Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube
ASTM E 2209 : 2021 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
ASTM A 29/A29M : 2020 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
ASTM D 4203 : 2017 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM B 39 : 1979 : R2018 Standard Specification for Nickel
ASTM F 1684 : 2006 : R2021 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
ASTM D 2047 : 2017 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
ASTM B 747 : 2020 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
ASTM E 246 : 2021 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
ASTM D 8048 : 2021 : REV A Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
ASTM A 1055/A1055M : 2016 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
ASTM B 701/B701M : 2013 : R2018 Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)
ASTM D 1719 : 2011 : R2019 Standard Specification for Isobutyl Alcohol<sup>,</sup>
ASTM D 381 : 2019 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM B 250/B250M : 2019 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM B 115 : 2010 : R2021 Standard Specification for Electrolytic Copper Cathode
ASTM B 474/B474M : 2019 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe
ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
ASTM A 996/A996M : 2016 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
ASTM B 199 : 2017 Standard Specification for Magnesium-Alloy Permanent Mold Castings
ASTM A 230/A230M : 2019 Standard Specification for Steel Wire, Carbon Valve Spring Quality
ASTM B 194 : 2015 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B 6 : 2018 Standard Specification for Zinc
ASTM F 2257 : 2014 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
ASTM D 6443 : 2014 : R2019 : EDT 1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
ASTM D 7977 : 2019 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)
ASTM F 1713 : 2008 : R2021 : EDT 1 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
ASTM F 467M : 2006 : REV A : R2018 Standard Specification for Nonferrous Nuts for General Use (Metric)
ASTM D 7856 : 2021 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
ASTM A 494/A494M : 2022 Standard Specification for Castings, Nickel and Nickel Alloy
ASTM F 3056 : 2014 : R2021 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM B 108/B108M : 2019 Standard Specification for Aluminum-Alloy Permanent Mold Castings
ASTM E 2655 : 2014 : R2020 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM B 348/B348M : 2021 Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM E 316 : 2017 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
ASTM D 2916 : 2009 : R2017 Standard Specification for Isophorone
ASTM A 929/A929M : 2018 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
ASTM D 3548 : 2009 : R2017 Standard Specification for Ethyl Acrylate
ASTM D 5776 : 2021 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM E 359 : 2017 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
ASTM F 256 : 2005 : R2020 Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium (Withdrawn 2023)
ASTM A 703/A703M : 2020 : REV A Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
ASTM D 6681 : 2017 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
ASTM D 6585 : 2017 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM B 467 : 2014 Standard Specification for Welded Copper-Nickel Pipe
ASTM D 7882 : 2020 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
ASTM D 5579 : 2019 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
ASTM B 587 : 2019 Standard Specification for Welded Brass Tube
ASTM B 521 : 2019 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
ASTM A 999/A999M : 2018 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
ASTM B 803/B803M : 2019 Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM D 5966 : 2022 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
ASTM D 7518 : 2020 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM D 4836 : 2009 : R2017 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D 7714 : 2011 : R2021 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
ASTM A 1000/A1000M : 2017 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
ASTM D 6890 : 2021 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM B 823 : 2020 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts
ASTM E 1852 : 2019 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 6080 : 2018 : REV A Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
ASTM B 639 : 2002 : R2018 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
ASTM A 821/A821M : 2021 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
ASTM D 7976 : 2014 : R2020 Standard Specification for Purified Terephthalic Acid (PTA)
ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM B 179 : 2018 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
ASTM A 740 : 2021 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
ASTM F 138 : 2019 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
ASTM B 589 : 1994 : R2021 Standard Specification for Refined Palladium
ASTM B 919 : 2019 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
ASTM F 1058 : 2016 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
ASTM F 1314 : 2018 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

ASTM E 456 : 2013 : REV A : R2022 : EDT 1 Standard Terminology Relating to Quality and Statistics
ASTM E 2282 : 2023 Standard Guide for Defining the Test Result of a Test Method
ASTM E 2282 : 2014 : R2019 Standard Guide for Defining the Test Result of a Test Method
ASTM E 2282 : 2014 : R2023 Standard Guide for Defining the Test Result of a Test Method

View more information
£53.79
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.