ASTM E 456 : 2013 : REV A : R2022
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
17042024
English
21042022
1.1This standard is the general terminology standard for terms defined in the standards of Committee E11 on Quality and Statistics.
1.2A term in this standard which lists an attribution to an E11 technical standard indicates that the standard is normative for that term. Any changes in the term definition in the normative standard will be editorially changed in this standard. Any terms added to an E11 standard will be editorially added to this standard with an attribution to that standard.
1.3Term definitions that are similar to ISO 3534 will be noted in this standard, but ISO 3534 will not be considered normative for any E11 terms.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee 
E 11

DocumentType 
Reference Material

Pages 
11

PublisherName 
American Society for Testing and Materials

Status 
Superseded

SupersededBy  
Supersedes 
ASTM D 8293 : 2019  Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements 
ASTM D 8145 : 2018  Standard Practice for Sampling of Green Petroleum Coke 
ASTM C 1255 : 2018  Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive XRay Fluorescence Spectroscopy 
ASTM E 1297 : 2018  Standard Test Method for Measuring FastNeutron Reaction Rates by Radioactivation of Niobium 
ASTM E 2610 : 2018  Standard Test Method for Sensory Analysis—DuoTrio Test 
ASTM E 1885 : 2018  Standard Test Method for Sensory Analysis—Triangle Test 
ASTM D 1871 : 2004 : R2014  Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023) 
ASTM D 3856 : 2011 : R2015  Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) 
ASTM D 4179 : 2011 : R2017  Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers 
ASTM D 4284 : 2012 : R2017 : EDT 1  Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry 
ASTM D 4513 : 2011 : R2017  Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving 
ASTM D 4642 : 2004 : R2016  Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry 
ASTM D 4780 : 2012 : R2017 : EDT 1  Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption 
ASTM D 4782 : 2010 : R2016  Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry 
ASTM D 5124 : 1996 : R2018  Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation 
ASTM D 5153 : 2010 : R2016  Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption 
ASTM D 5467/D5467M : 1997 : R2017  Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam 
ASTM D 5757 : 2011 : R2017  Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets 
ASTM D 6175 : 2003 : R2019  Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles 
ASTM D 6342 : 2012 : R2017 : EDT 1  Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy 
ASTM D 6856/D6856M : 2003 : R2016  Standard Guide for Testing FabricReinforced “Textile” Composite Materials 
ASTM D 7565/D7565M : 2010 : R2017  Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures 
ASTM D 7616/D7616M : 2011 : R2017  Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet LayUp FiberReinforced Polymer Matrix Composites Used for Strengthening Civil Structures 
ASTM D 7617/D7617M : 2011 : R2017  Standard Test Method for Transverse Shear Strength of Fiberreinforced Polymer Matrix Composite Bars 
ASTM E 131 : 2010 : R2015  Standard Terminology Relating to Molecular Spectroscopy 
ASTM E 1367 : 2003 : R2014  Standard Test Method for Measuring the Toxicity of SedimentAssociated Contaminants with Estuarine and Marine Invertebrates 
ASTM E 1656/E1656M : 2011 : R2016  Standard Guide for Classification of Automated Pavement Condition Survey Equipment (Withdrawn 2022) 
ASTM E 1827 : 2011 : R2017  Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door 
ASTM E 2120 : 2010 : R2016  Standard Practice for Performance Evaluation of the Portable XRay Fluorescence Spectrometer for the Measurement of Lead in Paint Films 
ASTM E 2475 : 2010 : R2016  Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control 
ASTM E 2834 : 2012 : R2018  Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA) 
ASTM F 1773 : 2009 : R2015  Standard Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices (Withdrawn 2024) 
ASTM E 3009 : 2015 : EDT 1  Standard Test Method for Sensory Analysis—Tetrad Test 
ASTM E 526 : 2017 : EDT 1  Standard Test Method for Measuring FastNeutron Reaction Rates by Radioactivation of Titanium 
ASTM D 7390 : 2018 : EDT 1  Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments 
ASTM C 168 : 2019  Standard Terminology Relating to Thermal Insulation 
ASTM D 635 : 2018  Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position 
ASTM D 3518/D3518M : 2018  Standard Test Method for InPlane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate 
ASTM D 4699 : 2003 : R2018 : EDT 1  Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles 
ASTM F 2554 : 2018  Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems 
ASTM D 5357 : 2019  Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by Xray Diffraction 
ASTM D 3906 : 2019  Standard Test Method for Determination of Relative Xray Diffraction Intensities of FaujasiteType ZeoliteContaining Materials 
ASTM D 3907/D3907M : 2019  Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test 
ASTM D 4463/D4463M : 2019  Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts 
ASTM E 2709 : 2019  Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure 
ASTM C 1474 : 2019  Standard Test Method for Analysis of Isotopic Composition of Uranium in NuclearGrade Fuel Material by Quadrupole Inductively Coupled PlasmaMass Spectrometry 
ASTM D 7337/D7337M : 2012 : R2019  Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars 
ASTM D 7705/D7705M : 2012 : R2019  Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction 
ASTM D 6873/D6873M : 2019  Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates 
ASTM D 7615/D7615M : 2019  Standard Practice for OpenHole Fatigue Response of Polymer Matrix Composite Laminates 
ASTM D 6109 : 2019  Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products 
ASTM D 3012 : 2019  Standard Test Method for ThermalOxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven 
ASTM D 3479/D3479M : 2019  Standard Test Method for TensionTension Fatigue of Polymer Matrix Composite Materials 
ASTM C 613 : 2019  Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction 
ASTM D 2842 : 2019  Standard Test Method for Water Absorption of Rigid Cellular Plastics 
ASTM E 29 : 2013 : R2019  Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications 
ASTM E 1345 : 1998 : R2019  Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements 
ASTM D 6108 : 2019  Standard Test Method for Compressive Properties of Plastic Lumber and Shapes 
ASTM D 6631 : 2005 : R2019  Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method 
ASTM D 6259 : 2015 : R2019  Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method 
ASTM D 6290 : 2019  Standard Test Method for Color Determination of Plastic Pellets 
ASTM C 1683 : 2010 : R2019  Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics 
ASTM E 535 : 2019  Standard Practice for Preparation of FireTestResponse Standards 
ASTM D 4365 : 2019  Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst 
ASTM D 4659 : 2019  Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates 
ASTM D 4567 : 2019  Standard Test Method for SinglePoint Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method 
ASTM D 5155 : 2019  Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates 
ASTM E 2234 : 2009 : R2018  Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL 
ASTM D 2863 : 2019  Standard Test Method for Measuring the Minimum Oxygen Concentration to Support CandleLike Combustion of Plastics (Oxygen Index) 
ASTM D 4877 : 2019  Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates 
ASTM D 1044 : 2019  Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser 
ASTM E 2554 : 2018 : EDT 1  Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques 
ASTM E 766 : 2014(R2019)  Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope 
ASTM D 7905/D7905M : 2019 : EDT 1  Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional FiberReinforced Polymer Matrix Composites 
ASTM D 3014 : 2019 : REV A  Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position 
ASTM E 2283 : 2008 : R2019  Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features 
ASTM E 2798 : 2019  Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application 
ASTM E 3080 : 2019  Standard Practice for Regression Analysis with a Single Predictor Variable 
ASTM E 1605 : 2019  Standard Terminology Relating to Lead in Buildings 
ASTM D 4812 : 2019  Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics 
ASTM F 2232 : 2014 : R2020  Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear 
ASTM E 2762 : 2010 : R2020  Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL 
ASTM E 2677 : 2020  Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest 
ASTM E 2655 : 2014 : R2020  Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods 
ASTM D 7913/D7913M : 2014 : R2020  Standard Test Method for Bond Strength of FiberReinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing 
ASTM E 1260 : 2003 : R2020  Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging LightScattering Instruments 
ASTM F 1061 : 2008 : R2020  Standard Specification for Ski Binding Test Devices 
ASTM D 1929 : 2020  Standard Test Method for Determining Ignition Temperature of Plastics 
ASTM D 3575 : 2020  Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers 
ASTM E 2586 : 2019 : EDT 1  Standard Practice for Calculating and Using Basic Statistics 
ASTM D 7249/D7249M : 2020  Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure 
ASTM D 5132 : 2020  Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles 
ASTM D 1603 : 2020  Standard Test Method for Carbon Black Content in Olefin Plastics 
ASTM D 4804 : 2020  Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics 
ASTM D 4218 : 2020  Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the MuffleFurnace Technique 
ASTM D 4986 : 2020  Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials 
ASTM C 273/C273M : 2020  Standard Test Method for Shear Properties of Sandwich Core Materials 
ASTM D 4663 : 2020  Flameproof restrained plugs 
ASTM D 2234/D2234M : 2020  Standard Practice for Collection of a Gross Sample of Coal 
ASTM D 792 : 2020  Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement 
ASTM D 3769 : 2020  Standard Test Method for Microcellular Urethanes—HighTemperature Sag 
ASTM D 4662 : 2020  Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols 
ASTM D 4058 : 1996 : R2020  Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers 
ASTM D 4464 : 2015 : R2020  Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering 
ASTM D 7250/D7250M : 2020  Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness 
ASTM D 1622 : 2020  Standard Test Method for Apparent Density of Rigid Cellular Plastics 
ASTM C 1671 : 2020 : REV A  Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging 
ASTM C 393/C393M : 2020  Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure 
ASTM C 1067 : 2020  Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials 
ASTM D 5681 : 2020  Standard Terminology for Waste and Waste Management 
ASTM E 1706 : 2020  Standard Test Method for Measuring the Toxicity of SedimentAssociated Contaminants with Freshwater Invertebrates 
ASTM F 2150 : 2019  Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and TissueEngineered Medical Products 
ASTM E 3143 : 2018 : REV B  Standard Practice for Performing CryoTransmission Electron Microscopy of Liposomes 
ASTM E 1617 : 2009 : R2019  Standard Practice for Reporting Particle Size Characterization Data 
ASTM E 2263 : 2012 : R2018  Standard Test Method for Paired Preference Test 
ASTM E 1994 : 2009 : R2018  Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans 
ASTM E 2282 : 2014 : R2019  Standard Guide for Defining the Test Result of a Test Method 
ASTM E 2334 : 2009 : R2018  Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of NonConforming items, or a Rate of Occurrence for NonConformities, Using Attribute Data, When There is a Zero Response in the Sample 
ASTM E 1488 : 2012 : R2018  Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods 
ASTM E 141 : 2010 : R2018  Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling 
ASTM D 4180 : 2013 : R2018  Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers 
ASTM D 7084 : 2018  Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers 
ASTM D 6115 : 1997 : R2019  Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional FiberReinforced Polymer Matrix Composites 
ASTM E 1402 : 2013 : R2018  Standard Guide for Sampling Design 
ASTM D 4226 : 2019 : EDT 1  Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products 
ASTM D 5766/D5766M : 2011 : R2018  Standard Test Method for OpenHole Tensile Strength of Polymer Matrix Composite Laminates 
ASTM D 4164 : 2013 : R2018  Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers 
ASTM C 1673 : 2010 : REV A : R2018  Standard Terminology of C26.10 Nondestructive Assay Methods 
ASTM C 1648 : 2012 : R2018  Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass 
ASTM D 4512 : 2003 : R2018 : EDT 1  Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder 
ASTM D 4781 : 2003 : R2018 : EDT 1  Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles 
ASTM D 1238 : 2020  Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer 
ASTM D 4968 : 2019 : REV A  Standard Practice for Annual Review of Test Methods and Specifications for Plastics 
ASTM D 5048 : 2020 : REV A  Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to BurnThrough of Solid Plastics Using a 125mm Flame 
ASTM D 3801 : 2020 : REV A  Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position 
ASTM E 1323 : 2015 : R2020  Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data 
ASTM E 2262 : 2003 : R2020  Standard Practice for Estimating Thurstonian Discriminal Distances 
ASTM D 7027 : 2020  Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine 
ASTM E 2281 : 2015 : R2020  Standard Practice for Process Capability and Performance Measurement 
ASTM B 331 : 2020  Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction 
ASTM C 721 : 2020  Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability 
ASTM E 177 : 2020  Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods 
ASTM D 4255/D4255M : 2020  Standard Test Method for InPlane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method 
ASTM D 3908 : 2020  Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method 
ASTM B 330 : 2020  Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability 
ASTM D 6484/D6484M : 2020  Standard Test Method for OpenHole Compressive Strength of Polymer Matrix Composite Laminates 
ASTM D 4222 : 2020  Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements 
ASTM D 3663 : 2020  Standard Test Method for Surface Area of Catalysts and Catalyst Carriers 
ASTM D 7136/D7136M : 2020  Standard Test Method for Measuring the Damage Resistance of a FiberReinforced Polymer Matrix Composite to a DropWeight Impact Event 
ASTM D 1056 : 2020  Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber 
ASTM D 6576 : 2020  Standard Specification for Flexible Cellular Rubber Chemically Blown 
ASTM C 534/C534M : 2020 : REV A  Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form 
ASTM D 2126 : 2020  Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging 
ASTM D 3576 : 2020  Standard Test Method for Cell Size of Rigid Cellular Plastics 
ASTM D 8314 : 2020  Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping 
ASTM D 2396 : 2020  Standard Test Methods for PowderMix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer 
ASTM C 1271 : 1999 : R2020  Standard Test Method for Xray Spectrometric Analysis of Lime and Limestone 
ASTM D 613 : 2018 : REV A : EDT 1  Standard Test Method for Cetane Number of Diesel Fuel Oil 
ASTM E 399 : 2020 : REV A  Standard Test Method for LinearElastic PlaneStrain Fracture Toughness of Metallic Materials 
ASTM D 4889 : 2021  Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates 
ASTM D 5523 : 2021  Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates 
ASTM D 6341 : 2021  Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) 
ASTM D 7914/D7914M : 2021  Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations 
ASTM D 1790 : 2021  Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact 
ASTM D 5420 : 2021  Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) 
ASTM D 6226 : 2021  Standard Test Method for Open Cell Content of Rigid Cellular Plastics 
ASTM D 1004 : 2021  Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting 
ASTM D 7264/D7264M : 2021  Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials 
ASTM E 3023 : 2021  Standard Practice for Probability of Detection Analysis for <emph type="bdit"><?Pub _font FamName="Times New Roman"?>â<?Pub /_font?></emph> Versus <emph type="bdit">a</emph> Data 
ASTM D 8336 : 2021  Standard Test Method for Characterizing Tack of Prepregs Using a Continuous ApplicationandPeel Procedure 
ASTM C 1427 : 2021  Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form 
ASTM D 7078/D7078M : 2020 : EDT 1  Standard Test Method for Shear Properties of Composite Materials by VNotched Rail Shear Method 
ASTM D 6641/D6641M : 2016 : EDT 2  Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture 
ASTM D 3410/D3410M : 2016 : EDT 1  Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading 
ASTM D 5379/D5379M : 2019 : EDT 1  Standard Test Method for Shear Properties of Composite Materials by the VNotched Beam Method 
ASTM B 939 : 2021  Standard Test Method for Radial Crushing Strength, <emph type="bdit">K</emph>, of Powder Metallurgy (PM) Bearings and Structural Materials 
ASTM C 1285 : 2021  Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) 
ASTM E 2943 : 2015 : R2021  Standard Guide for TwoSample Acceptance and Preference Testing With Consumers 
ASTM D 3420 : 2021  Standard Test Method for Pendulum Impact Resistance of Plastic Film 
ASTM D 6300 : 2021  Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants 
ASTM D 1203 : 2021  Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods 
ASTM D 5507 : 2021 : REV A  Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography 
ASTM D 8337/D8337M : 2021  Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using SingleLap Shear Test 
ASTM D 955 : 2021  Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics 
ASTM D 6299 : 2021  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM E 2819 : 2011 : R2021  Standard Practice for Single and MultiLevel Continuous Sampling of a Stream of Product by Attributes Indexed by AQL 
ASTM E 2935 : 2021  Standard Practice for Evaluating Equivalence of Two Testing Processes 
ASTM E 178 : 2021  Standard Practice for Dealing With Outlying Observations 
ASTM D 5758 : 2001 : R2021  Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM5 by XRay Diffraction 
ASTM D 8387/D8387M : 2021  Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates 
ASTM D 7248/D7248M : 2021  Standard Test Method for High Bearing  Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2Fastener Specimens 
ASTM D 7205/D7205M : 2021  Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars 
ASTM D 4481 : 2021  Standard Test Method for Total Nickel in Fresh AluminaBase Catalysts 
ASTM E 105 : 2021  Standard Guide for Probability Sampling of Materials 
ASTM D 6026 : 2021  Standard Practice for Using Significant Digits and Data Records in Geotechnical Data 
ASTM E 1169 : 2021  Standard Practice for Conducting Ruggedness Tests 
ASTM D 6890 : 2021  Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber 
ASTM D 5227 : 2021  Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins 
ASTM E 2696 : 2021  Standard Practice for Life and Reliability Testing Based on the Exponential Distribution 
ASTM D 8321 : 2021  Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements 
ASTM D 4475 : 2021  Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the ShortBeam Method 
ASTM D 4274 : 2021  Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols 
ASTM D 4671 : 2021  Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols 
ASTM E 3159 : 2021  Standard Guide for General Reliability 
ASTM E 1325 : 2021  Standard Terminology Relating to Design of Experiments 
ASTM D 8393 : 2021  Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption 
ASTM D 4329 : 2021  Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics 
ASTM D 2885 : 2021  Standard Test Method for Determination of Octane Number of SparkIgnition Engine Fuels by OnLine Direct Comparison Technique 
ASTM D 6122 : 2021  Standard Practice for Validation of the Performance of Multivariate Online, AtLine, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems 
ASTM E 2587 : 2016 : R2021 : EDT 1  Standard Practice for Use of Control Charts in Statistical Process Control 
ASTM E 1655 : 2017  Standard Practices for Infrared Multivariate Quantitative Analysis 
ASTM C 1239 : 2013 : R2018  Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics 
ASTM E 1707 : 2015  GUIDE FOR ESTIMATING UNCERTAINITIES IN DOSIMETRY FOR RADIATION PROCESSING 
ASTM D 7372 : 2021  Standard Guide for Analysis and Interpretation of Proficiency Test Program Results 
ASTM B 873 : 2021  Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 
ASTM B 212 : 2021  Standard Test Method for Apparent Density of FreeFlowing Metal Powders Using the Hall Flowmeter Funnel 
ASTM D 5419 : 2021  Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures 
ASTM D 7310 : 2021  Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors 
ASTM F 1645/F1645M : 2016  Standard Test Method for Water Migration in Honeycomb Core Materials 
ASTM D 2344/D2344M : 2016  Standard Test Method for ShortBeam Strength of Polymer Matrix Composite Materials and Their Laminates 
ASTM D 5961/D5961M : 2017  Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates 
ASTM D 3039/D3039M : 2017  Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials 
ASTM D 5448/D5448M : 2016  Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders 
ASTM E 3193 : 2021  Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) 
ASTM C 518 : 2021  Standard Test Method for SteadyState Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus 
ASTM D 7133 : 2021  Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids 
ASTM D 7137/D7137M : 2017  Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates 
ASTM B 761 : 2017 : R2021  Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by XRay Monitoring of Gravity Sedimentation 
ASTM D 5280 : 1996 : R2021  Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions 
ASTM D 7309 : 2021 : REV B  Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry 
ASTM D 6621 : 2021  Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials 
ASTM E 2489 : 2021  Standard Practice for Statistical Analysis of OneSample and TwoSample Interlaboratory Proficiency Testing Programs 
ASTM D 3354 : 2021  Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method 
ASTM D 909 : 2021  Standard Test Method for Supercharge Rating of SparkIgnition Aviation Gasoline 
ASTM E 1970 : 2016 : R2021  Standard Practice for Statistical Treatment of Thermoanalytical Data 
ASTM F 1789 : 2017 : REV A : EDT 1  Standard Terminology for F16 Mechanical Fasteners 
ASTM D 2013/D2013M : 2021  Standard Practice for Preparing Coal Samples for Analysis 
ASTM D 2699 : 2021  Standard Test Method for Research Octane Number of SparkIgnition Engine Fuel 
ASTM D 6792 : 2021 : REV C  Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories 
ASTM D 5450/D5450M : 2016  Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders 
ASTM D 1822 : 2021  Standard Test Method for Determining the TensileImpact Resistance of Plastics 
ASTM E 691 : 2021  Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 
ASTM D 8428 : 2021  Standard Guide for Establishing Analyst Competence to Perform a Test Method 
ASTM D 5528/D5528M : 2021  Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional FiberReinforced Polymer Matrix Composites 
ASTM E 2653 : 2021  Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories 
ASTM D 5517 : 2014 : R2021  Standard Test Method for Determining Extractability of Metals from Art Materials 
ASTM D 1977 : 2016  Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis 
ASTM E 3264 : 2021  Standard Guide for Homogeneity of Samples and Reference Materials Used for Inter and IntraLaboratory Studies 
ASTM D 7846 : 2021  Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites 
ASTM E 2555 : 2021 : EDT 1  Standard Practice for Factors and Procedures for Applying the MILSTD105 Plans in Life and Reliability Inspection 
ASTM E 3291 : 2021  Standard Guide for Reliability Demonstration Testing 
ASTM D 2047 : 2017  Standard Test Method for Static Coefficient of Friction of PolishCoated Flooring Surfaces as Measured by the James Machine 
ASTM E 2544 : 2011 : REV A : R2019 : EDT 1  Standard Terminology for ThreeDimensional (3D) Imaging Systems 
ASTM D 7290 : 2006 : R2022  Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications 
ASTM D 6671/D6671M : 2022  Standard Test Method for Mixed Mode IMode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites 
ASTM D 3675 : 2022  Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source 
ASTM D 3768 : 2022  Standard Test Method for Microcellular Urethanes—Flexural Recovery 
ASTM D 2843 : 2022  Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics 
ASTM E 3297 : 2021  Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with a Charged Aerosol Detector (CAD) 
ASTM D 6415/D6415M : 2022  Standard Test Method for Measuring the Curved Beam Strength of a FiberReinforced PolymerMatrix Composite 
ASTM D 2700 : 2022  Standard Test Method for Motor Octane Number of SparkIgnition Engine Fuel 
ASTM E 3323 : 2021  Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative LightScattering Detector (ELSD) 
ASTM E 1732 : 2022  Standard Terminology Relating to Forensic Science 
ASTM E 122 : 2017 : R2022  Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process 
ASTM D 6761 : 2022  Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers 
ASTM D 6437 : 2022  Standard Test Method for Polyurethane Raw Materials: Alkalinity in LowAlkalinity Polyols (Determination of CPR Values of Polyols) 
ASTM E 3324 : 2022  Standard Test Method for Lipid Quantitation in Liposomal Formulations Using UltraHighPerformance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS) 
ASTM E 1458 : 2012 : R2022  Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles 
ASTM D 7253 : 2022  Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols 
ASTM C 366/C366M : 2016  Standard Test Methods for Measurement of Thickness of Sandwich Cores 
ASTM F 1062 : 1997 : R2018  Standard Test Method for Verification of Ski Binding Test Devices 
ASTM D 2777 : 2013  Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water 
ASTM E 2108 : 2016  Standard Practice for Calibration of the Electron BindingEnergy Scale of an XRay Photoelectron Spectrometer 
ASTM E 2139 : 2005 : R2018  Standard Test Method for SameDifferent Test 
ASTM E 2164 : 2016  Standard Test Method for Directional Difference Test 
ASTM C 365/C365M : 2016  Standard Test Method for Flatwise Compressive Properties of Sandwich Cores 
ASTM E 2363 : 2014  Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry 
ASTM D 3030 : 2017  Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins 
ASTM B 311 : 2017  Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity 
ASTM D 3552 : 2017  Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites 
ASTM D 7336/D7336M : 2016  Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials 
ASTM B 855 : 2017  Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel 
ASTM C 364/C364M : 2016  Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions 
ASTM B 963 : 2017  Standard Test Methods for Oil Content, OilImpregnation Efficiency, and SurfaceConnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle 
ASTM C 670 : 2015  Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials 
ASTM C 802 : 2014  Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials 
ASTM D 6264/D6264M : 2017  Standard Test Method for Measuring the Damage Resistance of a FiberReinforced PolymerMatrix Composite to a Concentrated QuasiStatic Indentation Force 
ASTM D 5117 : 2017  Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock 
ASTM D 5492 : 2017  Standard Test Method for Determination of Xylene Solubles in Propylene Plastics 
ASTM E 266 : 2017  Standard Test Method for Measuring FastNeutron Reaction Rates by Radioactivation of Aluminum 
ASTM E 284 : 2017  Standard Terminology of Appearance 
ASTM E 631 : 2015  Standard Terminology of Building Constructions 
ASTM D 6609 : 2017  Standard Guide for PartStream Sampling of Coal 
ASTM D 6883 : 2017  Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles 
ASTM C 297/C297M : 2016  Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions 
ASTM C 271/C271M : 2016  Standard Test Method for Density of Sandwich Core Materials 
ASTM D 5449/D5449M : 2016  Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders 
ASTM C 480/C480M : 2016  Standard Test Method for Flexure Creep of Sandwich Constructions 
ASTM D 6742/D6742M : 2017  Standard Practice for FilledHole Tension and Compression Testing of Polymer Matrix Composite Laminates 
ASTM E 2782 : 2017  Standard Guide for Measurement Systems Analysis (MSA) 
ASTM D 7668 : 2017  Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method 
ASTM D 7766/D7766M : 2016  Standard Practice for Damage Resistance Testing of Sandwich Constructions 
ASTM E 2862 : 2018  Standard Practice for Probability of Detection Analysis for Hit/Miss Data 
ASTM D 7778 : 2015  Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 
ASTM E 2910 : 2012 : R2018  Standard Guide for Preferred Methods for Acceptance of Product 
ASTM E 2919 : 2014  Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose 
ASTM C 394/C394M : 2016  Standard Test Method for Shear Fatigue of Sandwich Core Materials 
ASTM D 7291/D7291M : 2015  Standard Test Method for ThroughThickness “Flatwise” Tensile Strength and Elastic Modulus of a FiberReinforced Polymer Matrix Composite Material 
ASTM D 6790/D6790M : 2016  Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores 
ASTM D 7956/D7956M : 2016  Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen 
ASTM F 3107 : 2014  Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems 
ASTM D 6772/D6772M : 2016  Standard Test Method for Dimensional Stability of Sandwich Core Materials 
ASTM D 8004 : 2015  Standard Test Method for Fuel Dilution of InService Lubricants Using Surface Acoustic Wave Sensing 
ASTM D 8067/D8067M : 2017  Standard Test Method for InPlane Shear Properties of Sandwich Panels Using a Picture Frame Fixture 
ASTM D 8131/D8131M : 2017 : EDT 1  Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates 
ASTM D 7958/D7958M : 2017  Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test 
ASTM D 8066/D8066M : 2017  Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates 
ASTM D 8132/D8132M : 2017  Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement 
ASTM F 3211 : 2017  Standard Guide for FatiguetoFracture (FtF) Methodology for Cardiovascular Medical Devices 
ASTM E 3000 : 2018  Standard Guide for Measuring and Tracking Performance of Assessors on a Descriptive Sensory Panel 
ASTM C 917/C917M : 2018  Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength 
ASTM F 3263 : 2017  Standard Guide for Packaging Test Method Validation 
ASTM D 5154/D5154M : 2018  Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test 
ASTM C 363/C363M : 2016  Standard Test Method for Node Tensile Strength of Honeycomb Core Materials 
ASTM D 7332/D7332M : 2016  Standard Test Method for Measuring the Fastener PullThrough Resistance of a <brk/>FiberReinforced Polymer Matrix Composite 
ASTM E 3313 : 2024  Standard Guide for Communication of Assessor and Panel Performance 
ASTM E 1732 : 2024  Standard Terminology Relating to Forensic Science 
ASTM D 6890 : 2022  Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber 
ASTM E 2653 : 2023  Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Test Method with Fewer Than Six Participating Laboratories 
ASTM B 931 : 2023  Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts 
ASTM D 6108 : 2024  Standard Test Method for Compressive Properties of Plastic Lumber and Shapes 
ASTM D 542 : 2022  Standard Test Method for Index of Refraction of Transparent Organic Plastics 
ASTM F 2554 : 2022  Standard Practice for Measurement of Positional Accuracy of ComputerAssisted Surgical Systems 
ASTM D 8321 : 2022  Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements 
ASTM D 5124 : 1996 : R2022  Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation 
ASTM D 4812 : 2019 : EDT 1  Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics 
ASTM E 1970 : 2023  Standard Practice for Statistical Treatment of Thermoanalytical Data 
ASTM D 2734 : 2023  Standard Test Methods for Void Content of Reinforced Plastics 
ASTM D 8336 : 2024  Standard Test Method for Characterizing Tack of Prepregs Using a Continuous ApplicationandPeel Procedure 
ASTM D 785 : 2023  Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials 
ASTM D 8510/D8510M : 2023  Standard Test Method for Local Buckling and Crippling under Axial Compressive Loading 
ASTM E 3242 : 2023  Standard Guide for Developing Representative Background Concentrations at Sediment Sites—Data Evaluation and Development Methodologies 
ASTM B 963 : 2024  Standard Test Methods for Oil Content, OilImpregnation Efficiency, and SurfaceConnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle 
ASTM E 284 : 2022  Standard Terminology of Appearance 
ASTM D 7084 : 2023  Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers 
ASTM B 962 : 2023  Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle 
ASTM D 5449/D5449M : 2022  Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders 
ASTM D 8387/D8387M : 2023  Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates 
ASTM D 2777 : 2021  Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water 
ASTM D 5153 : 2022  Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry 
ASTM D 1929 : 2023  Standard Test Method for Determining Ignition Temperature of Plastics 
ASTM D 7137/D7137M : 2023  Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates 
ASTM B 311 : 2022  Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity 
ASTM F 1645/F1645M : 2022  Standard Test Method for Water Migration in Honeycomb Core Materials 
ASTM D 1238 : 2023 : REV A  Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer 
ASTM D 1977 : 2022  Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis 
ASTM D 5024 : 2023  Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression 
ASTM D 8004 : 2023  Standard Test Method for Fuel Dilution of InService Lubricants Using Surface Acoustic Wave Sensing 
ASTM D 4878 : 2023  Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols 
ASTM E 3193 : 2023  Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS) 
ASTM D 6792 : 2023 : REV C  Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories 
ASTM D 1494 : 2022  Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels 
ASTM D 3591 : 2022  Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds 
ASTM D 2463 : 2023  Standard Test Method for Drop Impact Resistance of BlowMolded Thermoplastic Containers 
ASTM D 635 : 2022  Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position 
ASTM C 670 : 2024 : REV A  Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials 
ASTM D 8388/D8388M : 2022  Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions 
ASTM D 7766/D7766M : 2023  Standard Practice for Damage Resistance Testing of Sandwich Constructions 
ASTM D 5629 : 2023  Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in LowAcidity Aromatic Isocyanates and Polyurethane Prepolymers 
ASTM D 7487 : 2024  Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test 
ASTM E 1617 : 2009 : R2024  Standard Practice for Reporting Particle Size Characterization Data 
ASTM D 8454/D8454M : 2022  Standard Test Method for OpenHole Compressive Strength of Sandwich Constructions 
ASTM D 4804 : 2023  Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics 
ASTM D 7778 : 2015 : R2022 : EDT 1  Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 
ASTM E 131 : 2010 : R2023  Standard Terminology Relating to Molecular Spectroscopy 
ASTM D 6112 : 2023  Standard Test Methods for Compressive and Flexural Creep and CreepRupture of Plastic Lumber and Shapes 
ASTM F 1789 : 2023  Standard Terminology for F16 Mechanical Fasteners 
ASTM D 7336/D7336M : 2022  Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials 
ASTM E 2475 : 2023  Standard Guide for Process Understanding Related to Pharmaceutical Manufacture and Control 
ASTM D 638 : 2022  Standard Test Method for Tensile Properties of Plastics 
ASTM D 4780 : 2023  Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption 
ASTM C 271/C271M : 2016 : R2022 : EDT 1  Standard Test Method for Density of Sandwich Core Materials 
ASTM E 3323 : 2022  Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative LightScattering Detector (ELSD) 
ASTM D 7332/D7332M : 2023  Standard Test Method for Measuring the Fastener PullThrough Resistance of a <brk/>FiberReinforced Polymer Matrix Composite 
ASTM D 7248/D7248M : 2023  Standard Test Method for High Bearing  Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2Fastener Specimens 
ASTM D 6641/D6641M : 2023  Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture 
ASTM C 168 : 2022  Standard Terminology Relating to Thermal Insulation 
ASTM D 8131/D8131M : 2023  Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates 
ASTM D 613 : 2024  Standard Test Method for Cetane Number of Diesel Fuel Oil 
ASTM E 1154 : 2023  Standard Specification for Piston or Plunger Operated Volumetric Apparatus and Operator Qualification 
ASTM D 4274 : 2023  Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols 
ASTM D 1203 : 2023  Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods 
ASTM D 6790/D6790M : 2022  Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores 
ASTM D 2344/D2344M : 2022  Standard Test Method for ShortBeam Strength of Polymer Matrix Composite Materials and Their Laminates 
ASTM E 3177 : 2018  Standard Guide on Sampling for Process Analytical Technology 
ASTM E 3239 : 2021  Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing 
ASTM D 4699 : 2023  Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles 
ASTM D 6042 : 2023  Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) 
ASTM D 883 : 2024  Standard Terminology Relating to Plastics 
ASTM D 7616/D7616M : 2011 : R2023  Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet LayUp FiberReinforced Polymer Matrix Composites Used for Strengthening Civil Structures 
ASTM E 2363 : 2023  Standard Terminology Relating to Manufacturing of Pharmaceutical and Biopharmaceutical Products in the Pharmaceutical and Biopharmaceutical Industry 
ASTM C 802 : 2014 : R2022  Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials 
ASTM D 5757 : 2022  Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets 
ASTM D 6299 : 2023 : REV A  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 570 : 2022  Standard Test Method for Water Absorption of Plastics 
ASTM D 7291/D7291M : 2022  Standard Test Method for ThroughThickness “Flatwise” Tensile Strength and Elastic Modulus of a FiberReinforced Polymer Matrix Composite Material 
ASTM D 1711 : 2024  Standard Terminology Relating to Electrical Insulation 
ASTM D 2699 : 2024  Standard Test Method for Research Octane Number of SparkIgnition Engine Fuel 
ASTM E 535 : 2023  Standard Practice for Preparation of FireTestResponse Standards 
ASTM E 3158 : 2018  Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building 
ASTM D 4438 : 2024  Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting 
ASTM D 5026 : 2023  Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension 
ASTM D 6742/D6742M : 2023  Standard Practice for FilledHole Tension and Compression Testing of Polymer Matrix Composite Laminates 
ASTM D 3479/D3479M : 2019 : R2023  Standard Test Method for TensionTension Fatigue of Polymer Matrix Composite Materials 
ASTM B 946 : 2023  Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products 
ASTM D 2700 : 2024  Standard Test Method for Motor Octane Number of SparkIgnition Engine Fuel 
ASTM D 5672/D5672M : 2022  Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25mm [1in.] Deflection Technique 
ASTM D 5508 : 2023  Standard Test Method for Determination of Residual Acrylonitrile Monomer in StyreneAcrylonitrile Copolymer Resins and NitrileButadiene Rubber by HeadspaceCapillary Gas Chromatography (HSCGC) 
ASTM D 4273 : 2023  Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols 
ASTM D 4272/D4272M : 2023  Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop 
ASTM D 3763 : 2023  Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors 
ASTM D 8145 : 2023 : REV A  Standard Practice for Sampling of Green Petroleum Coke 
ASTM B 855 : 2022  Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel 
ASTM D 8287/D8287M : 2022  Standard Test Method for Compressive Residual Strength Properties of Damaged Sandwich Composite Panels 
ASTM E 3009 : 2024  Standard Test Method for Sensory Analysis—Tetrad Test 
ASTM D 6856/D6856M : 2023  Standard Guide for Testing FabricReinforced “Textile” Composite Materials 
ASTM D 8285/D8285M : 2019  Standard Practice for Compressive Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates by Sandwich Construction Long Beam Flexure 
ASTM E 1922/E1922M : 2022  Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials 
ASTM D 5448/D5448M : 2022  Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders 
ASTM D 6631 : 2005 : R2023  Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method 
ASTM D 5766/D5766M : 2023  Standard Test Method for OpenHole Tensile Strength of Polymer Matrix Composite Laminates 
ASTM E 399 : 2023  Standard Test Method for LinearElastic PlaneStrain Fracture Toughness of Metallic Materials 
ASTM D 4255/D4255M : 2020 : EDT 1  Standard Test Method for InPlane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method 
ASTM B 214 : 2022  Standard Test Method for Sieve Analysis of Metal Powders 
ASTM D 3489 : 2023  Standard Test Methods for Microcellular Urethane Materials 
ASTM D 7668 : 2023  Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method 
ASTM D 909 : 2022  Standard Test Method for Supercharge Rating of SparkIgnition Aviation Gasoline 
ASTM D 1746 : 2023  Standard Test Method for Transparency of Plastic Sheeting 
ASTM D 8132/D8132M : 2023  Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement 
ASTM D 4440 : 2023  Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology 
ASTM E 266 : 2023  Standard Test Method for Measuring FastNeutron Reaction Rates by Radioactivation of Aluminum 
ASTM E 2544 : 2024  Standard Terminology for ThreeDimensional (3D) Imaging Systems 
ASTM D 695 : 2023  Standard Test Method for Compressive Properties of Rigid Plastics 
ASTM D 4179 : 2022  Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers 
ASTM C 365/C365M : 2022  Standard Test Method for Flatwise Compressive Properties of Sandwich Cores 
ASTM E 3143 : 2018 : REV B : R2023  Standard Practice for Performing CryoTransmission Electron Microscopy of Liposomes 
ASTM D 4672 : 2024  Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols 
ASTM E 2862 : 2023  Standard Practice for Probability of Detection Analysis for Hit/Miss Data 
ASTM D 6761 : 2022 : REV A  Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers 
ASTM D 7252 : 2022  Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates 
ASTM D 4803 : 2024  Standard Test Method for Predicting Heat Buildup in PVC Building Products 
ASTM D 4660 : 2023  Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate 
ASTM D 5492 : 2017 : R2024  Standard Test Method for Determination of Xylene Solubles in Propylene Plastics 
ASTM E 2919 : 2022  Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose 
ASTM C 1648 : 2012 : R2023  Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass 
ASTM D 1042 : 2022  Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture 
ASTM B 873 : 2023  Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 
ASTM D 4180 : 2023  Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers 
ASTM D 8559 : 2024  Standard Specification for Ambient Outdoor Air Quality Sensors and SensorBased Instruments for Portable and FixedPoint Measurement 
ASTM D 4093 : 2023  Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials 
ASTM D 4875 : 2024  Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols 
ASTM E 1367 : 2003 : R2023  Standard Test Method for Measuring the Toxicity of SedimentAssociated Contaminants with Estuarine and Marine Invertebrates 
ASTM D 6979 : 2024  Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen 
ASTM E 526 : 2022  Standard Test Method for Measuring FastNeutron Reaction Rates By Radioactivation of Titanium 
ASTM D 6111 : 2024  Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement 
ASTM D 1667 : 2022  Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (ClosedCell) 
ASTM E 422 : 2022  Standard Test Method for Measuring Net Heat Flux Using a WaterCooled Calorimeter 
ASTM D 5418 : 2023  Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) 
ASTM D 6259 : 2023  Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method 
ASTM D 5961/D5961M : 2023  Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates 
ASTM D 6122 : 2023  Standard Practice for Validation of the Performance of Multivariate Online, AtLine, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems 
ASTM D 5681 : 2023  Standard Terminology for Waste and Waste Management 
ASTM D 5023 : 2023  Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (ThreePoint Bending) 
ASTM D 6873/D6873M : 2023  Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates 
ASTM D 8066/D8066M : 2023  Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates 
ASTM D 6772/D6772M : 2022  Standard Test Method for Dimensional Stability of Sandwich Core Materials 
ASTM D 7615/D7615M : 2023  Standard Practice for OpenHole Fatigue Response of Polymer Matrix Composite Laminates 
ASTM E 1605 : 2022  Standard Terminology Relating to Lead in Buildings 
ASTM D 4513 : 2022  Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving 
ASTM D 1709 : 2022  Standard Test Methods for Impact Resistance of Plastic Film by the FreeFalling Dart Method 
ASTM E 1827 : 2022  Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door 
ASTM D 5225 : 2022  Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer 
ASTM D 5450/D5450M : 2022  Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders 
ASTM D 6484/D6484M : 2023  Standard Test Method for OpenHole Compressive Strength of Polymer Matrix Composite Laminates 
ASTM D 8019 : 2023  Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets 
ASTM B 417 : 2022  Standard Test Method for Apparent Density of NonFreeFlowing Metal Powders Using the Carney Funnel 
ASTM D 6099 : 2024  Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates 
ASTM D 3030 : 2023  Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins 
ASTM D 6264/D6264M : 2023  Standard Test Method for Measuring the Damage Resistance of a FiberReinforced PolymerMatrix Composite to a Concentrated QuasiStatic Indentation Force 
ASTM C 366/C366M : 2016 : R2022 : EDT 1  Standard Test Methods for Measurement of Thickness of Sandwich Cores 
ASTM E 459 : 2022  Standard Test Method for Measuring Heat Transfer Rate Using a ThinSkin Calorimeter 
ASTM D 2863 : 2023  Standard Test Method for Measuring the Minimum Oxygen Concentration to Support CandleLike Combustion of Plastics (Oxygen Index) 
ASTM F 3107 : 2014 : R2023  Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems 
ASTM D 6300 : 2024  Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants 
ASTM C 534/C534M : 2023  Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form 
ASTM C 613 : 2023  Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction 
ASTM D 4986 : 2022  Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials 
ASTM E 2834 : 2012 : R2022  Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA) 
ASTM D 2578 : 2023  Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films 
ASTM D 8453/D8453M : 2022  Standard Practice for OpenHole Flexural Strength of Sandwich Constructions 
ASTM D 8293 : 2022  Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements 
ASTM D 8406 : 2022  Standard Practice for Performance Evaluation of Ambient Outdoor Air Quality Sensors and Sensorbased Instruments for Portable and Fixedpoint Measurement 
ASTM D 4512 : 2022  Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder 
ASTM E 1488 : 2012 : R2023  Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods 
ASTM E 1488 : 2023  Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods 
ASTM E 2334 : 2009 : R2023  Standard Practice for Setting an Upper Confidence Bound for a Fraction or Number of NonConforming items, or a Rate of Occurrence for NonConformities, Using Attribute Data, When There is a Zero Response in the Sample 
ASTM E 1402 : 2013 : R2023  Standard Guide for Sampling Design 
ASTM E 3080 : 2023  Standard Practice for Regression Analysis with a Single Predictor Variable 
ASTM E 2282 : 2023  Standard Guide for Defining the Test Result of a Test Method 
ASTM E 691 : 2023  Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 
ASTM E 691 : 2022  Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 
ASTM E 1994 : 2009 : R2023  Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans 
ASTM E 2282 : 2014 : R2023  Standard Guide for Defining the Test Result of a Test Method 
ASTM E 2782 : 2017 : R2022  Standard Guide for Measurement Systems Analysis (MSA) 
ASTM E 2709 : 2023  Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure 
ASTM E 2709 : 2019 : R2023  Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure 
ASTM E 2782 : 2017 : R2022 : EDT 1  Standard Guide for Measurement Systems Analysis (MSA) 
ASTM E 691 : 2021  Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method 
ASTM E 2782 : 2017  Standard Guide for Measurement Systems Analysis (MSA) 
ASTM E 2234 : 2009 : R2023  Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL 
ASTM E 141 : 2010 : R2023  Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling 
ASTM E 29 : 2022  Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications 
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features

Simple online access to standards, technical information and regulations.

Critical updates of standards and customisable alerts and notifications.

Multiuser online standards collection: secure, flexible and cost effective.