• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 691 : 2022

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

Available format(s)

Hardcopy , PDF

Superseded date

11-04-2023

Language(s)

English

Published date

27-06-2022

1.1This practice describes the techniques for planning, conducting, analyzing, and treating the results of an interlaboratory study (ILS) of a test method. The statistical techniques described in this practice provide adequate information for formulating the precision statement of a test method.

1.2This practice does not concern itself with the development of test methods but rather with gathering the information needed for a test method precision statement after the development stage has been successfully completed. The data obtained in the interlaboratory study may indicate, however, that further effort is needed to improve the test method.

1.3Since the primary purpose of this practice is the development of the information needed for a precision statement, the experimental design in this practice may not be optimum for evaluating materials, apparatus, or individual laboratories.

1.4Field of Application—This practice is concerned exclusively with test methods which yield a single numerical figure as the test result, although the single figure may be the outcome of a calculation from a set of measurements.

1.4.1This practice does not cover methods in which the measurement is a categorization; however, for many practical purposes categorical outcomes can be scored, such as zero-one scoring for binary measurements or as integers, ranks for example, for well-ordered categories and then the test result can be defined as an average, or other summary statistic, of several individual scores.

1.5This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 11
DocumentType
Standard Practice
Pages
29
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3953 : 2015 : R2022 Standard Specification for Strapping, Flat Steel and Seals
ASTM G 123 : 2000 : R2022 : EDT 1 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM F 1888 : 2009 : R2022 Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM D 6414 : 2023 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM C 794 : 2018 : R2022 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM F 2370 : 2022 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
ASTM D 2578 : 2023 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
ASTM C 1382 : 2016 : R2023 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM E 2009 : 2023 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM D 3803 : 1991 : R2022 Standard Test Method for Nuclear-Grade Activated Carbon
ASTM D 7330 : 2022 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D 2799 : 2023 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
ASTM D 5757 : 2022 Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM D 2197 : 2016 : R2022 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 5045 : 2014 : R2022 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D 4814 : 2022 Standard Specification for Automotive Spark-Ignition Engine Fuel
ASTM B 1023 : 2022 Standard Test Method for Abrasion Resistance of Hard Anodic Coatings by a Taber-Type Abraser
ASTM D 2862 : 2016 : R2022 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM C 802 : 2014 : R2022 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM F 1292 : 2022 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
ASTM E 3047 : 2022 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM D 7291/D7291M : 2022 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D 542 : 2022 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM F 1291 : 2022 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM D 7412 : 2022 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 1970 : 2023 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM D 5887/D5887M : 2022 : REV A Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM E 2480 : 2012 : R2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM C 1108 : 2023 Standard Test Method for Plutonium by Controlled-Potential Coulometry
ASTM D 2170/D2170M : 2022 Standard Test Method for Kinematic Viscosity of Asphalts
ASTM B 946 : 2023 Standard Test Methods for Surface Roughness of Powder Metallurgy (PM) Products
ASTM D 256 : 2023 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D 4796 : 2017 : R2022 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D 6132 : 2013 : R2022 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D 4797 : 2017 : R2022 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D 6299 : 2022 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM F 791 : 2018 : R2023 Standard Test Method for Stress Crazing of Transparent Plastics
ASTM F 1326 : 2002 : R2022 Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM D 5672/D5672M : 2022 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
ASTM D 4350 : 2016 : R2022 Standard Test Method for Corrosivity Index of Plastics and Fillers
ASTM B 855 : 2022 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM D 7812 : 2022 Standard Test Method for Tensile Testing of Aramid Paper
ASTM E 1623 : 2022 : REV A Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM D 6166 : 2012 : R2022 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM D 6090 : 2023 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
ASTM D 4273 : 2023 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
ASTM D 7202 : 2022 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 5153 : 2022 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry
ASTM G 139 : 2005 : R2022 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM D 7486 : 2022 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM F 2391 : 2022 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM D 1977 : 2022 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM G 77 : 2017 : R2022 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D 1494 : 2022 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM D 7682 : 2017 : R2022 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM C 1326 : 2013 : R2023 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM D 6241 : 2022 : REV A Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe
ASTM D 3591 : 2022 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
ASTM D 1203 : 2022 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
ASTM E 2301 : 2012 : R2022 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
ASTM E 2427 : 2022 Standard Test Method for Acceptance by Performance Testing for Test Sieves
ASTM C 165 : 2023 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM D 7639 : 2022 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 7811 : 2013 : R2022 Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM D 6007 : 2022 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM D 7791 : 2022 Standard Test Method for Uniaxial Fatigue Properties of Plastics
ASTM C 1301 : 2022 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
ASTM D 5629 : 2023 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
ASTM C 67/C67M : 2023 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D 4541 : 2022 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM E 1782 : 2022 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM D 7514 : 2014 : R2022 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
ASTM E 399 : 2022 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM F 970 : 2022 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
ASTM D 7520 : 2016 : R2023 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM C 24 : 2009 : R2022 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
ASTM D 4590 : 2022 Standard Test Method for Colorimetric Determination of <emph type="ital">p-tert</emph >-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM D 7844 : 2022 : REV A Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 3916 : 2022 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk /> Plastic Rod
ASTM E 970 : 2017 : EDT 1 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM C 876 : 2022 : REV B Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
ASTM D 7624 : 2022 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 8153 : 2022 Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
ASTM C 704/C704M : 2015 : R2022 : EDT 1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM D 4274 : 2023 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
ASTM E 110 : 2014 : R2023 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM D 8052/D8052M : 2022 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
ASTM D 2344/D2344M : 2022 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 2658 : 2018 : R2023 Standard Test Method for Determining Dimensions of Fiberboard Boxes
ASTM D 6195 : 2022 Standard Test Methods for Loop Tack
ASTM F 1978 : 2022 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM F 2607 : 2008 : R2022 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM D 4179 : 2022 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 720/D720M : 2022 Standard Test Method for Free-Swelling Index of Coal
ASTM D 6558 : 2022 Standard Test Method for Determination of TGA CO<inf>2</inf> Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM G 142 : 1998 : R2022 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM D 653 : 2022 Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 6773 : 2022 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
ASTM E 2653 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Test Method with Fewer Than Six Participating Laboratories
ASTM B 931 : 2023 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
ASTM E 2335 : 2022 Standard Guide for Laboratory Monitors
ASTM E 1085 : 2022 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM F 3574 : 2022 Standard Test Methods for Sacroiliac Joint Fusion Devices
ASTM C 1549 : 2016 : R2022 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 6575/D6575M : 2022 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM C 522 : 2003 : R2022 Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM E 2448 : 2022 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM G 150 : 2018 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
ASTM D 1238 : 2023 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM B 975 : 2022 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM C 225 : 1985 : R2022 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM D 4093 : 2023 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM F 2077 : 2022 Standard Test Methods for Intervertebral Body Fusion Devices
ASTM C 373 : 2018 : R2023 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
ASTM E 1367 : 2003 : R2023 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM F 3136 : 2022 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM B 311 : 2022 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM D 7234 : 2022 Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM C 457/C457M : 2023 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
ASTM D 8161 : 2017 : R2022 Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM A 956/A956M : 2022 Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM D 2171/D2171M : 2022 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 6559 : 2022 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM B 831 : 2022 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM D 635 : 2022 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D 6973 : 2014 : R2019 : EDT 1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM D 7735 : 2017 : R2022 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM D 4804 : 2023 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D 7521 : 2022 Standard Test Method for Determination of Asbestos in Soil
ASTM D 7941/D7941M : 2023 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D 5225 : 2022 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM B 417 : 2022 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM E 119 : 2022 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM D 198 : 2022 : REV A Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D 7708 : 2023 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM D 6493 : 2011 : R2022 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics
ASTM E 1354 : 2023 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM F 2101 : 2023 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of <emph type="ital" >Staphylococcus aureus</emph>
ASTM G 174 : 2022 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM D 3670 : 1991 : R2022 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM B 527 : 2023 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM C 534/C534M : 2023 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
ASTM D 5768 : 2002 : R2022 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM D 6267/D6267M : 2013 : R2022 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
ASTM D 7414 : 2022 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 159 : 2022 Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
ASTM F 410 : 2008 : R2022 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM D 7304 : 2022 : REV A Standard Test Method for Determination of Denatonium Benzoate in Engine Coolant by HPLC
ASTM C 1134 : 2023 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
ASTM D 4884/D4884M : 2022 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
ASTM E 28 : 2018 : R2022 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
ASTM D 8108 : 2021 : EDT 1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D 6761 : 2022 : REV A Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D 7252 : 2022 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
ASTM D 4660 : 2023 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
ASTM D 5208 : 2014 : R2022 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM D 6128 : 2022 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM C 177 : 2019 : EDT 1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM B 873 : 2023 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D 648 : 2018 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM F 2267 : 2022 Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM E 1921 : 2022 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM C 686 : 2017 : R2023 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
ASTM B 963 : 2022 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM D 7860 : 2014 : R2022 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
ASTM C 1165 : 2023 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<inf>2</inf>SO<inf>4</inf> at a Platinum Working Electrode
ASTM D 1709 : 2022 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 7183 : 2018 : REV A : R2023 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM E 384 : 2022 Standard Test Method for Microindentation Hardness of Materials
ASTM D 7774 : 2022 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D 1065 : 2018 : R2022 Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM F 3107 : 2014 : R2023 Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
ASTM G 97 : 2018 : R2022 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM D 5530 : 2022 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D 4512 : 2022 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D 8054/D8054M : 2022 Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns
ASTM D 8469 : 2022 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM C 1606 : 2010 : R2023 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM F 3340 : 2022 Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
ASTM E 1590 : 2023 Standard Test Method for Fire Testing of Mattresses
ASTM D 5630 : 2022 Standard Test Method for Ash Content in Plastics
ASTM B 214 : 2022 Standard Test Method for Sieve Analysis of Metal Powders
ASTM E 2864 : 2018 : R2022 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D 7415 : 2022 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM G 98 : 2017 : R2022 Standard Test Method for Galling Resistance of Materials
ASTM F 2203 : 2013 : R2022 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM D 5449/D5449M : 2022 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM F 3095 : 2017 : REV A : R2022 Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
ASTM D 7778 : 2015 : R2022 : EDT 1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 3246 : 2022 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM F 2845 : 2022 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
ASTM D 1667 : 2022 Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
ASTM F 735 : 2022 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM D 5450/D5450M : 2022 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 4491/D4491M : 2022 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM F 387 : 2017 : R2022 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM D 7458 : 2021 Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM D 5074 : 1990 : R2022 Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
ASTM D 5448/D5448M : 2022 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM F 2516 : 2022 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM D 5993 : 2018 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners
ASTM G 187 : 2018 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D 2007 : 2019 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D 5808 : 2020 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM D 4812 : 2019 : EDT 1 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
ASTM D 8451 : 2022 Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue
ASTM C 958 : 1992 : R2022 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM E 1680 : 2016 : R2022 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
ASTM D 1042 : 2022 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
ASTM D 6299 : 2022 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7202 : 2021 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 4254 : 2016 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D 3241 : 2020 : REV C Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM C 1271 : 1999 : R2020 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM D 1155 : 2010 : R2020 Standard Test Method for Roundness of Glass Spheres
ASTM D 6817/D6817M : 2017 : R2021 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D 8167/D8167M : 2018 : REV A Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D 5767 : 2018 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
ASTM D 8414/D8414M : 2021 Standard Test Method for Measurement of Jet Cup Attrition Index of Catalytic Materials
ASTM D 8117 : 2021 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
ASTM D 6349 : 2021 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
ASTM F 1717 : 2021 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM C 177 : 2019 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM D 854 : 2014 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 4632/D4632M : 2015 : REV A Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM E 2694 : 2021 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM C 670 : 2015 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM E 70 : 2019 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM E 698 : 2018 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM D 6480 : 2019 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
ASTM F 2569 : 2011 : R2019 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM C 800 : 2019 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
ASTM D 7466/D7466M : 2010 : R2015 : EDT 1 Standard Test Method for Measuring Asperity Height of Textured Geomembranes
ASTM D 3835 : 2016 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D 6980 : 2017 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
ASTM D 6641/D6641M : 2016 : EDT 2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM D 6656 : 2016 : R2021 Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
ASTM E 1458 : 2012 : R2022 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D 465 : 2015 : R2020 Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
ASTM E 1601 : 2019 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM F 1868 : 2017 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
ASTM D 4797 : 2017 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM D 2565 : 2016 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
ASTM F 1884 : 2004 : R2018 Standard Test Methods for Determining Residual Solvents in Packaging Materials
ASTM D 8207 : 2018 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry (Withdrawn 2023)
ASTM F 1304 : 2018 Standard Test Method for Deflection of Resilient Floor Tile
ASTM D 5083 : 2017 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D 7520 : 2016 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
ASTM D 7000 : 2019 : REV A Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
ASTM D 7559/D7559M : 2009 : R2020 Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions
ASTM D 5885/D5885M : 2020 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D 7280 : 2020 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
ASTM D 7133 : 2021 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM E 1036 : 2015 : R2019 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM D 5751 : 1999 : R2019 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM A 956/A956M : 2017 : REV A Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM D 1875 : 2003 : R2018 Standard Test Method for Density of Adhesives in Fluid Form
ASTM E 23 : 2018 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM G 202 : 2012 : R2020 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM D 5946 : 2017 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ASTM D 5917 : 2015 : R2019 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM F 1608 : 2021 Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
ASTM D 4459 : 2021 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
ASTM D 6115 : 1997 : R2019 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM F 2077 : 2018 Test Methods For Intervertebral Body Fusion Devices
ASTM D 2862 : 2016 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM F 2381 : 2019 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM D 7412 : 2021 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 2396 : 2020 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM B 636/B636M : 2015 : R2021 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM C 373 : 2018 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM D 6387 : 2019 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM E 2009 : 2008 : R2014 : EDT 1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM D 7735 : 2017 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM D 3907/D3907M : 2019 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D 6851 : 2020 Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM D 2809 : 2021 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM F 2459 : 2018 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
ASTM D 4481 : 2021 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM B 934 : 2021 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM E 2792 : 2021 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM G 109 : 2021 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM D 1585 : 2015 : R2020 Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM D 6259 : 2015 : R2019 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ASTM E 1655 : 2017 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM F 2338 : 2009 : R2020 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM D 1631 : 2010 : R2018 : EDT 1 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
ASTM D 852 : 2020 Standard Test Method for Solidification Point of Benzene
ASTM D 1499 : 2013 : R2021 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
ASTM E 643 : 2015 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM C 531 : 2018 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 542 : 2014 Standard Test Method for Index of Refraction of Transparent Organic Plastics
ASTM E 2994 : 2021 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM D 7291/D7291M : 2015 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM C 225 : 1985 : R2014 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM D 1746 : 2015 Standard Test Method for Transparency of Plastic Sheeting
ASTM C 876 : 2015 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
ASTM G 5 : 2014 : R2021 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM D 6657 : 2016 : R2021 Standard Test Method for pH of Wet Blue and Wet White
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM D 4512 : 2003 : R2018 : EDT 1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM F 1165 : 2020 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM E 2335 : 2017 Standard Guide for Laboratory Monitors
ASTM F 2299/F2299M : 2003 : R2017 Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
ASTM D 3768 : 2022 Standard Test Method for Microcellular Urethanes—Flexural Recovery
ASTM D 1425/D1425M : 2014 : R2020 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM D 6476 : 2012 : R2021 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
ASTM D 4493 : 2020 Standard Test Method for Solidification Point of Bisphenol A<brk/>(4,4<emph type="ital" >′</emph>-Isopropylidenediphenol)
ASTM D 6272 : 2017 : EDT 1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM F 1863 : 2016 : R2021 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
ASTM D 6900 : 2010 : R2020 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
ASTM D 7057 : 2018 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
ASTM E 2864 : 2018 Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption
ASTM D 3985 : 2017 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM F 558 : 2021 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM C 1674 : 2016 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM D 5748 : 1995 : R2019 Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
ASTM D 7330 : 2015 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D 5135 : 2021 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
ASTM D 7897 : 2018 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
ASTM D 4533/D4533M : 2015 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM E 1582 : 2021 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM G 211 : 2014 : R2020 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM C 1872 : 2018 : EDT 2 Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement
ASTM D 7779 : 2020 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM E 1641 : 2018 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D 3175 : 2020 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
ASTM D 7315 : 2017 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM F 1926/F1926M : 2014 : R2021 Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
ASTM D 6818 : 2021 Standard Test Method for Tensile Properties of Rolled Erosion Control Products
ASTM F 3139 : 2015 Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM G 151 : 2019 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM D 3366 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
ASTM D 5045 : 2014 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
ASTM D 4164 : 2013 : R2018 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D 6143 : 2018 Standard Test Method for Iron Content of Bisphenol A (4,4<emph type="bdit">′</emph > - Isopropylidenediphenol)
ASTM D 6266 : 2000 : REV A : R2017 Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM E 517 : 2019 Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
ASTM D 7313 : 2020 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM C 110 : 2020 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM D 4475 : 2021 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM F 355 : 2016 : EDT 1 Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
ASTM D 3575 : 2020 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
ASTM D 5235 : 2018 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM E 2371 : 2021 : REV A Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E 3264 : 2021 Standard Guide for Homogeneity of Samples and Reference Materials Used for Inter- and Intra-Laboratory Studies
ASTM D 6037 : 2021 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
ASTM D 4562 : 2001 : R2019 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM F 1317 : 1998 : R2019 Standard Test Method for Calibration of Microwave Ovens (Withdrawn 2024)
ASTM D 696 : 2016 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ASTM F 1887 : 2014 : R2019 : EDT 1 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM D 5594 : 2018 : REV A Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D 6144 : 2022 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
ASTM D 6701 : 2021 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
ASTM D 732 : 2017 Standard Test Method for Shear Strength of Plastics by Punch Tool
ASTM F 1819 : 2019 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
ASTM D 8078 : 2018 : EDT 1 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues
ASTM D 5492 : 2017 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
ASTM F 2544 : 2011 : R2018 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM D 7716 : 2011 : REV A : R2020 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
ASTM D 5965 : 2019 Standard Test Methods for Density of Coating Powders
ASTM F 2913 : 2019 Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
ASTM D 4781 : 2003 : R2018 : EDT 1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM C 1592/C1592M : 2021 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM D 7844 : 2021 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7551 : 2010 : R2015 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
ASTM C 1203 : 2004 : R2019 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
ASTM D 4049 : 2020 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
ASTM D 6741 : 2010 : R2019 Standard Test Methods for Silanes Used in Rubber Formulations<brk/>(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM D 8036 : 2016 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
ASTM D 1037 : 2012 : R2020 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM D 4239 : 2018 : EDT 1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D 5470 : 2017 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
ASTM D 2777 : 2021 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E 2242 : 2021 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM D 8176 : 2018 Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
ASTM F 1927 : 2020 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM C 1559 : 2015 : R2021 Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
ASTM D 8063 : 2018 Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
ASTM C 474 : 2015 : R2020 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
ASTM D 1987 : 2022 Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
ASTM D 2463 : 2015 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM F 1888 : 2009 : R2016 Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM D 5227 : 2021 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
ASTM D 4350 : 2016 Standard Test Method for Corrosivity Index of Plastics and Fillers
ASTM D 7234 : 2021 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E 2274 : 2016 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
ASTM D 8243 : 2019 Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
ASTM D 8405 : 2021 Standard Test Method for Evaluating PM<inf>2.5</inf> Sensors or Sensor Systems Used in Indoor Air Applications
ASTM E 3165 : 2018 Standard Test Method for Nighttime Retroreflected Chromaticity of Retroreflective Sheeting
ASTM F 373 : 2013 : R2022 Standard Test Method for Embossed Depth of Resilient Floor Coverings
ASTM C 1363 : 2019 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D 5155 : 2019 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
ASTM D 5228 : 2016 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
ASTM D 6796 : 2021 : EDT 1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
ASTM D 6032/D6032M : 2017 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM D 8032 : 2020 Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
ASTM D 7359 : 2018 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 4463/D4463M : 2019 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D 1921 : 2018 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM E 194 : 2020 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
ASTM D 7439 : 2021 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
ASTM E 1367 : 2003 : R2014 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM D 4273 : 2018 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
ASTM F 2977 : 2020 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM D 4417 : 2021 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM G 141 : 2009 : R2021 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM D 7698 : 2021 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
ASTM C 413 : 2018 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 5458 : 1995 : R2020 Standard Test Method for Peel Cling of Stretch Wrap Film
ASTM F 137 : 2008 : R2018 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
ASTM D 7309 : 2021 : REV B Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM D 7271 : 2006 : R2020 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM F 904 : 2016 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
ASTM E 1194 : 2017 Standard Test Method for Vapor Pressure
ASTM D 5306 : 1992 : R2018 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
ASTM D 3321 : 2019 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM E 398 : 2020 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM D 2868 : 2017 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
ASTM G 51 : 2018 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM D 4464 : 2015 : R2020 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
ASTM D 6484/D6484M : 2020 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM E 1918 : 2021 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM D 2369 : 2020 Standard Test Method for Volatile Content of Coatings
ASTM D 7937 : 2015 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM G 134 : 2017 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
ASTM B 946 : 2011 : R2016 Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
ASTM F 2214 : 2016 Standard Test Method for <emph type="bdit">In Situ</emph> Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
ASTM D 7881 : 2020 : EDT 1 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
ASTM C 835 : 2006 : R2020 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
ASTM D 6133 : 2002 : R2021 Standard Test Method for Acetone, <emph type="ital">p</emph>-Chlorobenzotrifluoride, Methyl Acetate or <emph type="ital">t</emph>-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 6479 : 2015 : R2020 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM C 302 : 2013 : R2022 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
ASTM F 2199 : 2020 Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
ASTM E 2536 : 2021 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM C 198 : 2009 : R2019 Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM D 695 : 2015 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM E 1617 : 2009 : R2019 Standard Practice for Reporting Particle Size Characterization Data
ASTM D 5672/D5672M : 2015 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
ASTM D 1353 : 2013 : R2021 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D 4061 : 2013 : R2018 Standard Test Method for Retroreflectance of Horizontal Coatings
ASTM D 3895 : 2019 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D 6693/D6693M : 2020 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM E 1860 : 2013 : R2018 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM C 1108 : 2017 Standard Test Method for Plutonium by Controlled-Potential Coulometry
ASTM D 8020 : 2015 : R2020 Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
ASTM C 1025 : 2015 : R2020 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C 1171 : 2016 : R2022 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM D 4321 : 2015 Standard Test Method for Package Yield of Plastic Film (Withdrawn 2024)
ASTM A 428/A428M : 2021 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D 4476/D4476M : 2014 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Withdrawn 2022)
ASTM D 7686 : 2019 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D 4791 : 2019 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D 7786 : 2013 : R2019 Standard Test Method for Determining Enamel Holdout
ASTM D 1494 : 2017 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
ASTM E 2649 : 2020 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM D 7635/D7635M : 2018 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM G 220 : 2020 Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials
ASTM D 1603 : 2020 Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM D 731 : 2022 Standard Test Method for Molding Index of Thermosetting Molding Powder
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM F 820 : 2021 Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
ASTM D 6531 : 2000 : R2019 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM F 1702 : 2010 : R2018 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM E 2655 : 2014 : R2020 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM C 179 : 2014 : R2019 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
ASTM D 1726 : 2011 : R2019 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
ASTM C 1869 : 2018 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
ASTM E 1488 : 2012 : R2018 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
ASTM D 7553 : 2015 : R2021 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
ASTM D 6175 : 2003 : R2019 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D 7348 : 2021 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM D 8130 : 2017 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
ASTM E 2890 : 2021 Standard Test Method for Determination of Kinetic Parameters and Reaction Order for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger and Farjas Methods
ASTM D 3576 : 2020 Standard Test Method for Cell Size of Rigid Cellular Plastics
ASTM D 2412 : 2021 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM G 67 : 2018 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM D 6973 : 2014 : R2019 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
ASTM G 98 : 2017 Standard Test Method for Galling Resistance of Materials
ASTM C 802 : 2014 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM E 92 : 2017 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM D 6902 : 2004 : R2017 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
ASTM F 2192 : 2005 : R2022 Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
ASTM F 1951 : 2021 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
ASTM D 7047 : 2015 : EDT 1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
ASTM D 494 : 2011(R2019) Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
ASTM D 1412/D1412M : 2020 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C
ASTM D 1525 : 2017 : EDT 1 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM E 2860 : 2020 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM D 7817 : 2012 : R2021 Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
ASTM D 2658 : 2018 Standard Test Method for Determining Dimensions of Fiberboard Boxes
ASTM E 1921 : 2021 : REV A Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >0</inf></emph>, for Ferritic Steels in the Transition Range
ASTM D 5341/D5341M : 2019 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM D 7391 : 2020 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM F 1276 : 1999 : R2016 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
ASTM D 698 : 2012 : R2021 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM B 975 : 2018 : EDT 1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM G 72/G72M : 2015 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM E 2298 : 2018 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM D 7639 : 2010 : R2018 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 4280 : 2018 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM D 1335 : 2021 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
ASTM D 3670 : 1991 : R2014 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D 6738 : 2015 : R2019 Standard Test Method for Precipitated Silica—Volatile Content
ASTM B 887 : 2012 : R2019 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
ASTM D 6289 : 2013 : R2019 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
ASTM B 330 : 2020 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
ASTM C 1292 : 2022 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM D 1240 : 2014 : R2018 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM D 2799 : 2021 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM E 2177 : 2020 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R<inf >L</inf>) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery
ASTM E 2406 : 2016 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
ASTM D 8054/D8054M : 2016 Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns
ASTM D 4926 : 2020 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D 7674 : 2014 : REV A : R2021 Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
ASTM F 2625 : 2010 : R2016 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM D 7056 : 2007 : R2018 Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
ASTM D 5831 : 2017 Standard Practice for Screening Fuels in Soils
ASTM D 7811 : 2013 : R2017 Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM F 3022 : 2016 : EDT 1 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
ASTM D 6855 : 2017 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM D 2866 : 2011 : R2018 Standard Test Method for Total Ash Content of Activated Carbon
ASTM B 922 : 2022 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D 5776 : 2021 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM D 6580 : 2017 Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
ASTM D 1003 : 2021 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D 5766/D5766M : 2011 : R2018 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D 8393 : 2021 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption
ASTM D 2519 : 2019 : REV A Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
ASTM D 7310 : 2021 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors
ASTM F 1632 : 2003 : R2018 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 4672 : 2018 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols
ASTM D 4274 : 2021 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
ASTM D 7100 : 2011 : R2020 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D 3967 : 2016 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D 7882 : 2020 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
ASTM D 3467 : 2004 : R2020 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
ASTM D 1683/D1683M : 2022 Standard Test Method for Failure in Sewn Seams of Woven Fabrics
ASTM D 7977 : 2019 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)
ASTM F 2251 : 2013 : R2018 Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM B 769 : 2011 : R2021 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM F 2013 : 2010 : R2016 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
ASTM D 7011 : 2015 : R2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM E 810 : 2020 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM F 2853 : 2010 : R2015 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
ASTM D 8342/D8342M : 2021 Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll
ASTM E 202 : 2018 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM D 3505 : 2018 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023)
ASTM F 218 : 2013 : R2020 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM G 132 : 1996 : R2018 Standard Test Method for Pin Abrasion Testing
ASTM E 2931 : 2013 : R2019 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM D 5187 : 2021 Standard Test Method for Determination of Crystallite Size (L<inf>c</inf>) of Calcined Petroleum Coke by X-Ray Diffraction
ASTM C 1421 : 2018 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM F 1249 : 2020 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM D 5419 : 2021 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D 3682 : 2021 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes by Atomic Spectrometry
ASTM E 1710 : 2018 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM F 1930 : 2018 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM E 2627 : 2013 : R2019 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM C 721 : 2020 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM B 939 : 2021 Standard Test Method for Radial Crushing Strength, <emph type="bdit">K</emph>, of Powder Metallurgy (PM) Bearings and Structural Materials
ASTM D 3361/D3361M : 2022 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM D 8394 : 2021 Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
ASTM E 292 : 2018 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM D 5017 : 2017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM G 123 : 2000 : R2015 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
ASTM D 4883 : 2018 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
ASTM D 7454 : 2019 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM C 1365 : 2018 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM D 7245 : 2009 : R2021 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM C 534/C534M : 2020 : REV A Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
ASTM D 822/D822M : 2013 : R2018 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM B 557M : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM D 4875 : 2018 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
ASTM G 16 : 2013 : R2019 Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM D 1492 : 2021 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
ASTM C 372 : 1994 : R2020 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
ASTM D 4699 : 2003 : R2018 : EDT 1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM F 3539 : 2022 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
ASTM D 6053 : 2014 : R2018 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM D 5649 : 2015 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 7504 : 2021 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM G 97 : 2018 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM D 3012 : 2019 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D 8097 : 2017:EDT 1 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D 4735 : 2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
ASTM C 267 : 2020 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
ASTM G 139 : 2005 : R2015 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM D 7427 : 2016 : R2021 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex (Withdrawn 2023)
ASTM D 5974 : 2020 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
ASTM D 6316 : 2017 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
ASTM D 4789 : 2020 : EDT 1 Standard Test Method for Solution Color of Bisphenol A (4,4<emph type="ital">′</emph >-Isopropylidenediphenol)
ASTM G 77 : 2017 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D 7707 : 2021 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
ASTM D 6478 : 2010 : R2019 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
ASTM D 1140 : 2017 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 5018 : 2018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
ASTM E 2677 : 2020 Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
ASTM C 1735 : 2017 : R2021 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM C 165 : 2007 : R2017 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C 1662 : 2018 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
ASTM E 2584 : 2020 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM E 1356 : 2008 : R2014 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023)
ASTM D 7521 : 2016 Standard Test Method for Determination of Asbestos in Soil
ASTM D 3014 : 2019 : REV A Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
ASTM D 1708 : 2018 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM C 1419 : 2014 : R2020 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
ASTM B 528 : 2016 : R2020 : EDT 1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
ASTM D 4180 : 2013 : R2018 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM C 1371 : 2015 : R2022 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 7043 : 2021 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D 8132/D8132M : 2017 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
ASTM D 6108 : 2019 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM D 785 : 2008 : R2015 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM A 773/A773M : 2021 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM D 4318 : 2017 : EDT 1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D 7860 : 2014 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
ASTM D 2843 : 2022 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D 7515 : 2019 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
ASTM E 2490 : 2009 : R2021 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM D 8005 : 2018 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 790 : 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D 7883 : 2020 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
ASTM D 2166/D2166M : 2016 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM F 2095 : 2007 : R2021 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
ASTM D 6290 : 2019 Standard Test Method for Color Determination of Plastic Pellets
ASTM C 522 : 2003 : R2016 Standard Test Method for Airflow Resistance of Acoustical Materials
ASTM C 1773 : 2021 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C 1341 : 2013 : R2018 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 4587 : 2011 : R2019 : EDT 1 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 5349 : 2019 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated, Sulfated Oils and Fatliquors by Oven Method
ASTM D 8214 : 2018 Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM E 3063 : 2017 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
ASTM D 7896 : 2019 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM D 5742 : 2016 Standard Test Method for Determination of Butane Activity of Activated Carbon
ASTM D 545 : 2019 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
ASTM D 3769 : 2020 Standard Test Method for Microcellular Urethanes—High-Temperature Sag
ASTM E 1805 : 2021 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
ASTM C 1497 : 2016 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
ASTM D 2067 : 1997 : R2020 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM E 572 : 2021 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM F 1326 : 2002 : R2016 Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM E 2141 : 2021 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E 430 : 2019 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM D 7414 : 2021 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 6258 : 2017 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM F 1710 : 2008 : R2016 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2023)
ASTM F 2980 : 2013 : R2017 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM D 1044 : 2019 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser
ASTM E 811 : 2009 : R2020 : EDT 1 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM F 3078 : 2015 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
ASTM E 1354 : 2022 : REV A Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 3906 : 2019 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D 4713 : 2012 : R2020 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
ASTM E 2448 : 2018 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM D 1414 : 2015 Standard Test Methods for Rubber O-Rings
ASTM C 1663 : 2018 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
ASTM D 7905/D7905M : 2019 : EDT 1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 2863 : 2019 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D 1518 : 2014 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate (Withdrawn 2023)
ASTM D 6007 : 2014 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM C 1708/C1708M : 2019 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
ASTM E 119 : 2020 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM D 6761 : 2022 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D 3846 : 2008 : R2015 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics (Withdrawn 2024)
ASTM D 792 : 2020 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM C 1326 : 2013 : R2018 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM B 117 : 2019 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM D 4272/D4272M : 2015 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D 850 : 2021 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
ASTM C 580 : 2018 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM E 177 : 2020 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM F 623 : 2019 Standard Performance Specification for Foley Catheter
ASTM D 5132 : 2020 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
ASTM G 143 : 2003 : R2018 Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM D 3368 : 2017 : R2022 Standard Specification for FEP Sheet and Film
ASTM D 5399 : 2009 : R2017 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D 7830/D7830M : 2014 : R2021 : EDT 1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D 4365 : 2019 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM B 578 : 2021 Standard Test Method for Microindentation Hardness of Electroplated Coatings
ASTM F 1802 : 2022 Standard Test Method for Performance Testing of Excess Flow Valves
ASTM F 2837 : 2011 : R2018 Standard Test Method for Hot Compression Properties of Gasket Materials
ASTM D 6226 : 2021 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
ASTM G 65 : 2016 : R2021 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM D 3389 : 2021 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 1822 : 2021 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics
ASTM D 2066 : 2007 : R2020 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
ASTM D 8069 : 2017 : REV A Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM F 1306 : 2021 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
ASTM E 3269 : 2021 Standard Test Method for Determination of the Mass Fraction of Particle-Bound Gold in Colloidal Gold Suspensions
ASTM D 1823 : 2016 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D 6414 : 2014 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM D 6267/D6267M : 2013 : R2017 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
ASTM D 6437 : 2022 Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
ASTM E 1414/E1414M : 2021 : REV A Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM D 7964/D7964M : 2019 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM E 28 : 2018 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
ASTM F 1514 : 2019 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM F 2826 : 2014 : R2018 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
ASTM B 886 : 2019 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
ASTM G 142 : 1998 : R2016 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM D 3354 : 2021 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D 7785 : 2021 Standard Practice for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
ASTM D 3749 : 2019 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
ASTM D 5459 : 1995 : R2020 Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
ASTM D 4226 : 2019 : EDT 1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
ASTM C 579 : 2018 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 5422 : 2017 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D 6241 : 2014 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM G 122 : 2020 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents and Processes
ASTM F 2136 : 2018 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM E 415 : 2021 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM F 2731 : 2018 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
ASTM D 4301 : 2005(R2019) Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
ASTM D 1709 : 2016 : REV A : EDT 1 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 3364 : 1999 : R2019 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 5795 : 2016 Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
ASTM D 6979 : 2018 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
ASTM E 246 : 2021 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
ASTM D 7063/D7063M : 2018 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
ASTM G 152 : 2013 : R2021 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM E 855 : 2021 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D 2583 : 2013 : REV A Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022)
ASTM D 1214 : 2010 : R2020 Standard Test Method for Sieve Analysis of Glass Spheres
ASTM D 6195 : 2003 : R2019 Standard Test Methods for Loop Tack
ASTM E 2551 : 2020 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D 8019 : 2015 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM C 1549 : 2016 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM F 3287 : 2017 : EDT 1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
ASTM E 535 : 2019 Standard Practice for Preparation of Fire-Test-Response Standards
ASTM D 5357 : 2019 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
ASTM C 1891 : 2020 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
ASTM D 8040 : 2018 Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
ASTM D 6493 : 2011 : R2015 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM D 4440 : 2015 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
ASTM D 7748/D7748M : 2014 : R2021 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles, and Related Products
ASTM C 1733 : 2021 Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method
ASTM E 1447 : 2022 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
ASTM E 991 : 2021 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM F 2634 : 2015 : R2021 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D 7911 : 2019 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM D 1238 : 2020 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM F 2391 : 2005 : R2016 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
ASTM D 6090 : 2017 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
ASTM D 3760 : 2018 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (Withdrawn 2022)
ASTM D 4804 : 2020 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D 3032 : 2021 : REV A Standard Test Methods for Hookup Wire Insulation
ASTM D 4253 : 2016 : EDT 1 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D 3942 : 2019 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
ASTM D 6721 : 2001 : R2015 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 248 : 2020 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM D 3420 : 2021 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM C 832 : 2021 Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM D 6558 : 2000 : REV A : R2015 : EDT 1 Standard Test Method for Determination of TGA CO<inf>2</inf> Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM F 2150 : 2019 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products
ASTM D 4093 : 1995 : R2014 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
ASTM D 4780 : 2012 : R2017 : EDT 1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM F 2105 : 2021 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
ASTM D 8028 : 2017 Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
ASTM D 1938 : 2019 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D 8115 : 2017 : R2021 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
ASTM D 7855/D7855M : 2013 : R2021 Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM E 1856 : 2013 : R2021 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM E 2823 : 2017 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM D 7415 : 2021 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7744/D7744M : 2020 Standard Test Methods for Tensile Testing of High Performance Polyethylene Films
ASTM E 3160 : 2018 Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles
ASTM D 2134 : 2019 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM C 749 : 2015 : R2020 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM F 1307 : 2020 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM D 4674 : 2019 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM C 1445 : 2013 : R2018 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
ASTM E 1709 : 2016 : R2022 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM G 174 : 2004 : R2017 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM D 4020 : 2018 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D 6576 : 2020 Standard Specification for Flexible Cellular Rubber Chemically Blown
ASTM D 7284 : 2020 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D 2197 : 2016 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM F 1446 : 2020 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
ASTM D 6038 : 2021 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
ASTM E 1590 : 2022 Standard Test Method for Fire Testing of Mattresses
ASTM C 1446 : 2019 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM C 20 : 2000 : R2022 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM F 1291 : 2016 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM C 473 : 2019 Standard Test Methods for Physical Testing of Gypsum Panel Products
ASTM C 1012/C1012M : 2018 : REV B Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM B 761 : 2017 : R2021 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM G 69 : 2020 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM E 1165 : 2020 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM D 4058 : 1996 : R2020 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D 2063/D2063M : 2010 : R2018 Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
ASTM G 192 : 2008 : R2020 : EDT 1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM D 1686 : 2019 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
ASTM D 6631 : 2005 : R2019 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM D 6110 : 2018 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM G 181 : 2021 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM B 311 : 2017 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
ASTM F 152 : 1995 : R2017 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM D 8010 : 2018 Standard Test Method for Determination of Water Soluble Alkali Content in Coal
ASTM E 1251 : 2017 : REV A Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
ASTM C 1246 : 2017 : R2022 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM D 5208 : 2014 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
ASTM D 3826 : 2018 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM E 1131 : 2020 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM D 7266 : 2013 : R2018 : EDT 1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
ASTM C 1720 : 2021 Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM C 1374 : 2018 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
ASTM D 4218 : 2020 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique
ASTM E 839 : 2011 : R2016 : EDT 1 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM D 1505 : 2018 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D 2559 : 2012 : REV A : R2018 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
ASTM D 6166 : 2012 : R2016 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM D 7115 : 2020 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
ASTM D 6357 : 2021 : REV B Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry
ASTM D 4678 : 2015 : REV A : R2019 Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM E 562 : 2019 : EDT 1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM D 5530 : 2015 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D 4891 : 2013 : R2018 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
ASTM E 1970 : 2016 : R2021 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM D 6234 : 2013 : R2020 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM D 5147/D5147M : 2018 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM C 695 : 2021 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM F 2157 : 2009 : R2018 Standard Specification for Synthetic Surfaced Running Tracks
ASTM C 1702 : 2017 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM D 6745 : 2022 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D 6913/D6913M : 2017 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F 3263 : 2017 Standard Guide for Packaging Test Method Validation
ASTM C 704/C704M : 2015 : R2022 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM D 7998 : 2019 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
ASTM F 2476 : 2020 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO<inf >2</inf>TR) Through Barrier Materials Using an Infrared Detector
ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM F 3004 : 2013 : R2020 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
ASTM C 651 : 2020 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM D 6566 : 2018 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D 1316 : 2020 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM F 608 : 2018 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
ASTM D 3763 : 2018 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
ASTM D 8289 : 2020 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
ASTM D 2121 : 2016 Standard Test Methods for Polymer Content of Styrene Monomer
ASTM G 48 : 2011 : R2020 : EDT 1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM E 1323 : 2015 : R2020 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM D 6132 : 2013 : R2017 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D 1623 : 2017 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM C 1104/C1104M : 2019 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM A 343/A343M : 2014 : R2019 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
ASTM D 5199 : 2012 : R2019 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D 3160 : 2020 : REV A Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
ASTM D 4642 : 2004 : R2016 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM F 1438 : 1993 : R2020 Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components (Withdrawn 2023)
ASTM C 739 : 2021 : REV A Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C 471M : 2020 : REV A : EDT 1 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
ASTM E 2653 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM F 1921/F1921M : 2012 : R2018 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
ASTM D 256 : 2010 : R2018 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D 3174 : 2012 : R2018 : EDT 1 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
ASTM B 703 : 2021 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 5071 : 2006 : R2021 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
ASTM D 6281 : 2015 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM D 882 : 2018 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D 4590 : 2018 Standard Test Method for Colorimetric Determination of <emph type="ital">p-tert</emph >-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM D 7624 : 2021 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM F 1284 : 2009 : R2016 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM D 5296 : 2019 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D 4208 : 2019 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
ASTM C 1259 : 2021 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM D 4179 : 2011 : R2017 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D 6583 : 2013 : R2019 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
ASTM E 291 : 2018 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
ASTM E 1695 : 2020 : EDT 1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM D 5329 : 2020 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
ASTM F 2778 : 2009 : R2020 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
ASTM F 3189 : 2020 Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete
ASTM D 7542 : 2021 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
ASTM D 4782 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D 4944 : 2018 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D 5744 : 2018 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 5031/D5031M : 2013 : R2018 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D 5887/D5887M : 2022 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D 6099 : 2018 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
ASTM F 2203 : 2013 : R2018 Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM E 2480 : 2012 : R2017 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM D 7637 : 2010 : R2021 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM F 3300 : 2018 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM D 7514 : 2014 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
ASTM D 6722 : 2019 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
ASTM E 948 : 2016 : R2020 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM F 801 : 2021 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D 1824 : 2016 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 4603 : 2018 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
ASTM D 952 : 2015 : R2021 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM F 2961 : 2022 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM D 2065 : 2003 : R2017 Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
ASTM E 110 : 2014 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM D 6762 : 2018 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
ASTM D 6499 : 2018 Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
ASTM D 5084 : 2016 : REV A Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM E 2540 : 2016 : R2022 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM C 1067 : 2020 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
ASTM D 5828 : 1997 : R2018 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
ASTM D 6857/D6857M : 2018 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM C 1501 : 2019 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM E 3039 : 2020 Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens
ASTM D 7736 : 2019 : REV A Standard Test Method for Determination of Acids and Glycol Esters in Glycols
ASTM D 3273 : 2021 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3803 : 1991 : R2014 Standard Test Method for Nuclear-Grade Activated Carbon
ASTM F 2894 : 2021 Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM E 2714 : 2013 : R2020 Standard Test Method for Creep-Fatigue Testing
ASTM G 153 : 2013 : R2021 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 8352 : 2020 Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
ASTM D 7871 : 2019 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM B 312 : 2020 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM C 1327 : 2015 : R2019 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM F 3080 : 2021 Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector, Infrared Measurement, and CCTV Camera System
ASTM F 3340 : 2018 Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
ASTM C 830 : 2000 : R2016 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM E 2248 : 2018 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
ASTM E 2008 : 2017 : R2021 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM G 156 : 2017 Standard Practice for Selecting and Characterizing Weathering Reference Materials
ASTM D 4355/D4355M : 2021 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus
ASTM D 7918 : 2017 : REV A Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
ASTM D 4685/D4685M : 2015 : R2020 Standard Test Method for Pile Fabric Abrasion
ASTM D 6809 : 2020 : REV A Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 6475 : 2017 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM B 329 : 2020 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM D 1203 : 2021 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
ASTM D 2582 : 2021 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
ASTM D 1475 : 2013 : R2020 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 7708 : 2014 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM B 647 : 2010 : R2016 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D 3418 : 2021 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 5154/D5154M : 2018 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D 6150 : 2016 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
ASTM D 1922 : 2015 : R2020 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 7487 : 2018 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
ASTM F 88/F88M : 2021 Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM D 5508 : 2016 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
ASTM D 1622 : 2020 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D 8136 : 2017 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
ASTM E 1792 : 2020 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM D 1065 : 2018 Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM B 1019 : 2021 Standard Test Method for Determination of Surface Oxides on Copper Rod<brk/>(for Electrical Purposes)
ASTM F 2797 : 2019 Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
ASTM E 384 : 2017 Standard Test Method for Microindentation Hardness of Materials
ASTM C 1468 : 2019 : REV A Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM D 7940 : 2021 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
ASTM F 3136 : 2015 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM C 1113/C1113M : 2009 : R2019 Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM F 1362 : 2018 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM C 1485 : 2019 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
ASTM F 2370 : 2016 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin
ASTM D 4824 : 2013 : R2018 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
ASTM D 4438 : 2013 : R2018 : EDT 1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D 7084 : 2018 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM C 1427 : 2021 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
ASTM C 686 : 2017 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
ASTM D 6459 : 2019 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM D 6300 : 2021 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6113 : 2021 Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D 7661 : 2018 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM E 2056 : 2004 : R2016 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM A 833 : 2019 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D 198 : 2021 : REV A Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM G 32 : 2016 : R2021 : EDT 1 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM E 2301 : 2012 : R2017 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
ASTM D 7477 : 2016 : R2021 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
ASTM E 2187 : 2020 : REV A Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM D 1790 : 2021 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM E 537 : 2020 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM D 6042 : 2009 : R2016 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
ASTM C 1182 : 2009(R2019) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM A 1038 : 2019 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM E 2546 : 2015 Standard Practice for Instrumented Indentation Testing
ASTM F 1264 : 2016 : EDT 1 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM E 159 : 2017 Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
ASTM E 1326 : 2020 Standard Guide for Evaluating Non-culture Microbiological Tests
ASTM C 747 : 2016 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM D 7972 : 2014 : R2020 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM C 67/C67M : 2021 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D 7304 : 2022 Standard Test Method for Determination of Denatonium Benzoate in Engine Coolant by HPLC
ASTM C 518 : 2021 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D 4222 : 2020 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM F 36 : 2015 : R2021 Standard Test Method for Compressibility and Recovery of Gasket Materials
ASTM D 5757 : 2011 : R2017 Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM E 1858 : 2008 : R2015 : EDT 1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM C 24 : 2009 : R2018 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
ASTM E 1362 : 2015 : R2019 Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM D 4541 : 2017 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D 4751 : 2021 : REV A Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 7984 : 2021 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM C 1606 : 2010 : R2018 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM D 5048 : 2020 : REV A Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
ASTM C 1819 : 2021 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM D 4796 : 2017 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM C 1814/C1814M : 2020 Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
ASTM D 6525/D6525M : 2018 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D 8133 : 2021 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
ASTM F 2129 : 2019 : REV A Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM D 6460 : 2019 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D 5890 : 2019 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
ASTM B 963 : 2017 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
ASTM D 2765 : 2016 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D 5673 : 2016 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM F 37 : 2006 : R2019 Standard Test Methods for Sealability of Gasket Materials
ASTM D 4890 : 2018 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
ASTM E 1353 : 2021 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture (Withdrawn 2022)
ASTM B 822 : 2020 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM D 6419 : 2000 : R2017 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
ASTM D 7823 : 2020 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
ASTM D 2457 : 2021 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM C 604 : 2018 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM G 204 : 2021 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM D 1725 : 2012 : R2019 Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method
ASTM C 1785 : 2017 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM D 8356 : 2020 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
ASTM E 18 : 2022 Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E 970 : 2017 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM D 7283 : 2017 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM E 1640 : 2018 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 127 : 2019 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
ASTM D 2578 : 2017 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
ASTM D 3663 : 2020 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D 955 : 2021 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM B 214 : 2016 Standard Test Method for Sieve Analysis of Metal Powders
ASTM D 7151 : 2015 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1000 : 2017 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D 2305 : 2018 Standard Test Methods for Polymeric Films Used for Electrical Insulation
ASTM D 4884/D4884M : 2014 : REV A Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
ASTM D 7005/D7005M : 2016 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D 5420 : 2021 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D 4383 : 2021 Standard Specification for Plowable, Raised Retroreflective Pavement Markers
ASTM D 3103 : 2020 Standard Test Method for Thermal Insulation Performance of Distribution Packages
ASTM D 7682 : 2017 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM F 2082/F2082M : 2016 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM E 3151 : 2018 Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens
ASTM D 4326 : 2021 Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence
ASTM G 180 : 2021 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM D 6463/D6463M : 2006 : R2020 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D 3795 : 2020 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM B 873 : 2021 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417
ASTM D 2116 : 2016 : R2021 Standard Specification for FEP Resin Molding and Extrusion Materials
ASTM F 3299 : 2018 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P<inf>2</inf>O<inf >5</inf> Sensor)
ASTM E 2945 : 2014 : R2021 Standard Test Method for Film Permeability Determination Using Static Permeability Cells
ASTM F 2638 : 2022 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM D 7582 : 2015 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D 924 : 2015 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D 6474 : 2020 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D 7476 : 2008 : R2020 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
ASTM F2824:2010(R2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids<br>
ASTM D 36/D36M : 2014 : R2020 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM E 2832 : 2012 : R2017 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R<inf>L-2</inf >)
ASTM D 2638 : 2021 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM D 7253 : 2022 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
ASTM D 5824 : 1998 : R2017 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM B 982 : 2020 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM D 5628 : 2018 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM B 648 : 2010 : R2015 : EDT 1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM E 1834 : 2018 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM F 2607 : 2008 : R2014 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM F 2828 : 2020 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
ASTM D 4204 : 2016 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D 653 : 2021 : REV B Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D 5968 : 2019 : REV A : EDT 1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
ASTM D 5158 : 1998 : R2019 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
ASTM D 7681 : 2011 : R2021 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D 6360 : 2015 : R2021 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
ASTM F 1334 : 2018 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM D 5827 : 2022 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6886 : 2018 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D 1004 : 2021 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM B 527 : 2022 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM F 2004 : 2017 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM C 1279 : 2013 : R2019 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
ASTM D 3574 : 2017 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
ASTM D 7818 : 2012 : R2021 Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
ASTM E 2603 : 2015 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM F 1914 : 2018 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM D 7967 : 2021 Standard Test Method for Analysis of Chrome Content (as Cr<inf>2</inf>O<inf>3</inf>) in Wet Blue using Atomic Absorption or ICP
ASTM D 5504 : 2020 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 8087 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
ASTM F 1978 : 2018 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM D 4567 : 2019 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D 7305 : 2008 : REV A : R2020 Standard Test Method for Reflection Density of Printed Matter
ASTM D 953 : 2019 Standard Test Method for Pin-Bearing Strength of Plastics
ASTM F 970 : 2017 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
ASTM D 7148 : 2019 : REV A Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
ASTM F 2052 : 2021 Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
ASTM E 2783 : 2022 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure
ASTM D 7812 : 2016 Standard Test Method for Tensile Testing of Aramid Paper
ASTM F 2263 : 2014 : R2019 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
ASTM D 1977 : 2016 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D 8089 : 2017 Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
ASTM E 2427 : 2018 Standard Test Method for Acceptance by Performance Testing for Sieves
ASTM D 5755 : 2009 : R2014 : EDT 1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023)
ASTM D 6567 : 2018 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
ASTM D 2867 : 2017 Standard Test Methods for Moisture in Activated Carbon
ASTM C 1763 : 2020 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM C 1382 : 2016 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM D 6647 : 2018 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
ASTM D 6953 : 2018 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
ASTM D 6575/D6575M : 2016 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM D 4716/D4716M : 2022 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM E 9 : 2019 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM D 5229/D5229M : 2020 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM E 2591 : 2022 Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
ASTM F 2508 : 2016 : EDT 1 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
ASTM D 3403 : 2007 : R2021 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
ASTM D 5153 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM F 410 : 2008 : R2017 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM D 7816 : 2012 : R2021 Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
ASTM D 2232 : 2014 : R2018 Standard Test Method for Evaporating Residue of Naphthalene
ASTM D 7767 : 2011 : R2018 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
ASTM D 5225 : 2017 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D 5994/D5994M : 2010 : R2021 Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM C 1511 : 2015 : R2021 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
ASTM D 3975 : 1993 : R2019 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D 7536 : 2020 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM B 797 : 2020 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
ASTM D 8108 : 2021 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D 5178 : 2021 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 7570 : 2017 : R2021 : EDT 1 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
ASTM D 2584 : 2018 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 3492 : 2016 Standard Specification for Rubber Contraceptives (Male Condoms)
ASTM D 7535 : 2009 : R2015 Standard Test Method for Lead-210 in Water (Withdrawn 2024)
ASTM D 1331 : 2020 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D 8314 : 2020 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
ASTM F 3313 : 2020 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
ASTM F 2055 : 2017 : R2021 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gauge Method
ASTM C 307 : 2018 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM E 1545 : 2022 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D 6695 : 2016 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 7184 : 2020 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D 7584 : 2016 : R2021 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
ASTM E 1508 : 2012 : REV A : R2019 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
ASTM D 2842 : 2019 Standard Test Method for Water Absorption of Rigid Cellular Plastics
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM B 923 : 2022 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM D 6142 : 2021 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
ASTM E 1021 : 2015 : R2019 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
ASTM F 1647 : 2011 : R2018 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes
ASTM C 978 : 2004 : R2019 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM D 1998 : 2021 Standard Specification for Polyethylene Upright Storage Tanks
ASTM D 8380 : 2021 Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
ASTM B 933 : 2020 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM G 81 : 1997 : REV A : R2018 Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM D 7704 : 2016 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
ASTM E 3205 : 2020 Standard Test Method for Small Punch Testing of Metallic Materials
ASTM F 1315 : 2017 Standard Test Method for Density of a Sheet Gasket Material
ASTM E 2489 : 2021 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM D 2538 : 2018 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
ASTM C 1667 : 2015 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM D 5768 : 2002 : R2018 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM D 7370/D7370M : 2014 : R2021 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
ASTM F 1593 : 2008 : R2016 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer (Withdrawn 2023)
ASTM D 3963/D3963M : 2021 Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
ASTM D 1929 : 2020 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM F 2979 : 2020 Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses
ASTM D 480 : 1988 : R2020 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D 4085 : 1993 : R2021 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D 4284 : 2012 : R2017 : EDT 1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM G 57 : 2020 Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM D 7065 : 2017 Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
ASTM E 3047 : 2016 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM D 5836 : 2020 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
ASTM E 2948 : 2022 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM D 4213 : 2008 : R2016 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D 6559 : 2000 : REV A : R2016 : EDT 1 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM F 3107 : 2014 Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
ASTM D 7889 : 2021 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
ASTM F 146 : 2012 : R2019 : EDT 1 Standard Test Methods for Fluid Resistance of Gasket Materials
ASTM D 720/D720M : 2015 : EDT 1 Standard Test Method for Free-Swelling Index of Coal
ASTM D 7183 : 2018 : REV A : EDT 1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
ASTM E 3193 : 2021 Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
ASTM E 1782 : 2014 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM D 4483 : 2020 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM F 1292 : 2018 : EDT 1 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
ASTM E 766 : 2014(R2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM D 7843 : 2021 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
ASTM C 1774 : 2013(R2019) Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
ASTM E 1875 : 2020 : REV A Standard Test Method for Dynamic Young&apos;s Modulus, Shear Modulus, and Poisson&apos;s Ratio by Sonic Resonance
ASTM E 3171 : 2021 : REV A Standard Test Method for Determination of Total Silver in Textiles by ICP-OES or ICP-MS Analysis
ASTM F 3375 : 2019 Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
ASTM C 1285 : 2021 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
ASTM D 7237 : 2018 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D 4329 : 2021 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
ASTM D 8007 : 2015 : R2019 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
ASTM D 8161 : 2017 Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D 7884 : 2020 Standard Test Method for Determination of 4-Carboxybenzaldehyde and <emph type="bdit" >p</emph>-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
ASTM F 2156 : 2017 : R2022 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
ASTM D 8247 : 2019 Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection
ASTM D 4968 : 2019 : REV A Standard Practice for Annual Review of Test Methods and Specifications for Plastics
ASTM E 1967 : 2019 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM G 176 : 2003 : R2017 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM D 5556 : 2019 Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fatliquors and Softening Compounds
ASTM D 1621 : 2016 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D 635 : 2018 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM F 1515 : 2021 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM G 200 : 2020 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
ASTM D 3801 : 2020 : REV A Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM E 2455 : 2022 Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels
ASTM E 278 : 2021 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry
ASTM E 606/E606M : 2021 Standard Test Method for Strain-Controlled Fatigue Testing
ASTM F 756 : 2017 Standard Practice for Assessment of Hemolytic Properties of Materials
ASTM E 2283 : 2008 : R2019 Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
ASTM F 386 : 2017 : R2022 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM D 5572 : 1995 : R2019 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM D 3908 : 2020 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM C 1215 : 2018 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM D 6906 : 2012 : REV A : R2021 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM E 1868 : 2010 : R2021 Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM D 6743 : 2020 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
ASTM E 2399/E2399M : 2019 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
ASTM F 519 : 2018 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
ASTM D 7488 : 2011 : R2016 Standard Test Method for Open Time of Latex Paints
ASTM D 5629 : 2016 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
ASTM D 7819 : 2012 : R2021 Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
ASTM D 1693 : 2021 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D 6109 : 2019 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM D 1894 : 2014 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
ASTM D 6740 : 2015 : R2019 Standard Test Method for Silanes Used in Rubber Formulations<brk/>(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM D 7426 : 2008 : R2013 Standard Test Method for Assignment of the DSC Procedure for Determining T<inf>g</inf > of a Polymer or an Elastomeric Compound (Withdrawn 2022)
ASTM E 1085 : 2016 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D 5403 : 1993 : R2021 Standard Test Methods for Volatile Content of Radiation Curable Materials
ASTM D 7607/D7607M : 2019 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
ASTM E 247 : 2021 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
ASTM F 2878 : 2019 Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
ASTM B 557 : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM D 5386 : 2016 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM F 791 : 2018 Standard Test Method for Stress Crazing of Transparent Plastics
ASTM D 8271 : 2021 Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete
ASTM C 1335 : 2012 : R2017 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM E 2550 : 2021 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D 7191 : 2018 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
ASTM D 5891/D5891M : 2019 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
ASTM D 4275 : 2017 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography
ASTM D 8031 : 2016 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
ASTM D 5758 : 2001 : R2021 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM E 112 : 2013 : R2021 Standard Test Methods for Determining Average Grain Size
ASTM F 3203 : 2019 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
ASTM E 1352 : 2016 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies (Withdrawn 2022)
ASTM E 2269 : 2021 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM F 2466 : 2010 : R2018 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
ASTM D 3288/D3288M : 2020 Standard Test Methods for Magnet-Wire Enamels
ASTM F 2102 : 2017 Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
ASTM D 7028 : 2007 : R2015 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D 3591 : 2017 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
ASTM F 2617 : 2015 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM D 7252 : 2017 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
ASTM D 4754 : 2018 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
ASTM C 1134 : 2017 : EDT 1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
ASTM C 25 : 2019 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM B 212 : 2021 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM E 1623 : 2022 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

View more information
£90.16
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.