• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 4 : 2021

Current
Current

The latest, up-to-date edition.

Standard Practices for Force Calibration and Verification of Testing Machines
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

23-08-2021

1.1These practices cover procedures for the force calibration and verification, by means of force measurement standards, of tension or compression, or both, static or quasi-static testing machines (which may, or may not, have force-indicators). These practices are not intended to be complete purchase specifications for testing machines.

1.2 Testing machines may be verified by one of the three following methods or combination thereof. Each of the methods require a specific measurement uncertainty, displaying metrological traceability to The International System of Units (SI).

1.2.1Use of standard weights,

1.2.2Use of equal-arm balances and standard weights, or

1.2.3Use of elastic force measurement standards.

1.3The procedures of 1.2.11.2.3 apply to the calibration and verification of the force-measuring systems associated with the testing machine, including the force indicators such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the force-measuring system(s) to be verified and included in the certificate and report of calibration and verification.

1.4Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4.1Other non-SI force units may be used with this standard such as the kilogram-force (kgf) which is often used with hardness testing machines

1.5Forces indicated on displays/printouts of testing machine data systems—be they instantaneous, delayed, stored, or retransmitted—which are verified with provisions of 1.2.1, 1.2.2, or 1.2.3, and are within the specifications stated in Section 15, comply with Practices E4.

1.6The requirements of these practices limit the major components of measurement uncertainty when calibrating testing machines. These Standard Practices do not require the allowable force measurement error to be reduced by the amount of the measurement uncertainty encountered during a calibration. As a result, a testing machine verified using these practices may produce a deviation from the true force greater than ±1.0 % when the force measurement error is combined with the measurement uncertainty.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 28
DocumentType
Standard Practice
Pages
14
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 2193 : 2020 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
ASTM D 7332/D7332M : 2016 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite
ASTM F 1934 : 1998 : R2018 Standard Test Method for Weighing a Backpacking or Mountaineering Tent
ASTM E 740/E740M : 2003 : R2016 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM B 986 : 2013 : R2019 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM D 6874 : 2021 Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation
ASTM C 1368 : 2018 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
ASTM C 730 : 1998 : R2021 Standard Test Method for Knoop Indentation Hardness of Glass
ASTM E 345 : 2016 Standard Test Methods of Tension Testing of Metallic Foil
ASTM F 414 : 2015 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
ASTM D 2343 : 2017 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
ASTM D 5868 : 2001 : R2014 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D 7791 : 2017 Standard Test Method for Uniaxial Fatigue Properties of Plastics
ASTM D 8069 : 2017 : REV A Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM E 3097 : 2017 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
ASTM D 6416/D6416M : 2016 : EDT 1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D 4014 : 2003 : R2018 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM C 651 : 2020 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM D 8289 : 2020 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
ASTM D 6415/D6415M : 2006 : REV A : R2013 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM E 2789 : 2010 : R2015 Standard Guide for Fretting Fatigue Testing
ASTM D 6958 : 2020 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
ASTM D 1004 : 2021 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM C 170/C170M : 2017 Standard Test Method for Compressive Strength of Dimension Stone
ASTM C 109/C109M : 2021 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM D 6004 : 2021 Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
ASTM D 8044 : 2016 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM C 165 : 2007 : R2017 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM E 1190 : 2011 : R2018 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
ASTM D 5528 : 2013 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM F 2589 : 2016 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
ASTM D 4761 : 2019 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM C 880/C880M : 2018 Standard Test Method for Flexural Strength of Dimension Stone
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM D 6671/D6671M : 2019 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D 7469 : 2021 Standard Test Methods for End Joints in Structural Wood Products
ASTM D 1635/D1635M : 2019 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM G 142 : 1998 : R2016 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
ASTM D 7248/D7248M : 2021 Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 8067/D8067M : 2017 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
ASTM E 1820 : 2020 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM D 1938 : 2019 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM E 1856 : 2013 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM D 380 : 1994 : R2020 Standard Test Methods for Rubber Hose
ASTM E 2206 : 2021 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM C 579 : 2018 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 2936 : 2020 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
ASTM F 2136 : 2018 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM E 72 : 2015 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E 1921 : 2021 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM C 1354/C1354M : 2015 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM D 6815 : 2009 : R2015 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 3479/D3479M : 2019 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM C 1361 : 2010 : R2019 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM D 5607 : 2016 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM C 514 : 2004 : R2020 Standard Specification for Nails for the Application of Gypsum Board
ASTM E 1426 : 2014 : R2019 : EDT 1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
ASTM C 695 : 2021 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM D 8387/D8387M : 2021 Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates
ASTM C 1171 : 2016 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM D 6264/D6264M : 2017 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM F 2711 : 2019 Standard Test Methods for Bicycle Frames
ASTM E 2322 : 2003 : R2015 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
ASTM D 5652 : 2021 Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
ASTM B 1008 : 2018 Standard Test Method for Stress-Strain Testing for Overhead Electrical Conductors
ASTM E 238 : 2017 : REV A Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM C 158 : 2002 : R2017 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D 1676 : 2017 Standard Test Methods for Film-Insulated Magnet Wire
ASTM D 953 : 2019 Standard Test Method for Pin-Bearing Strength of Plastics
ASTM D 8019 : 2015 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM D 6117 : 2018 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
ASTM C 307 : 2018 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM F 1062 : 1997 : R2018 Standard Test Method for Verification of Ski Binding Test Devices
ASTM F 1717 : 2021 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM A 627 : 2003 : R2019 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
ASTM C 849 : 1988 : R2020 Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM E 2207 : 2015 : R2021 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM C 273/C273M : 2020 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM E 2969 : 2018 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction
ASTM E 328 : 2021 Standard Test Methods for Stress Relaxation for Materials and Structures
ASTM C 159 : 2006 : R2021 Standard Specification for Vitrified Clay Filter Blocks
ASTM D 2844/D2844M : 2018 Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils
ASTM D 7774 : 2017 Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D 3914 : 2002 : R2016 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM C 1465 : 2008 : R2019 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM D 622 : 1999 : R2020 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
ASTM C 1211 : 2018 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
ASTM E 855 : 2021 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E 2714 : 2013 : R2020 Standard Test Method for Creep-Fatigue Testing
ASTM D 6195 : 2003 : R2019 Standard Test Methods for Loop Tack
ASTM F 2028 : 2017 Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
ASTM F 564 : 2017 Standard Specification and Test Methods for Metallic Bone Staples
ASTM C 1161 : 2018 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C 1899 : 2021 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C 1327 : 2015 : R2019 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM D 8377 : 2021 : REV A Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt
ASTM D 6641/D6641M : 2016 : EDT 2 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM D 3759/D3759M : 2005 : R2019 Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM D 1621 : 2016 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D 5449/D5449M : 2016 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 2659 : 2016 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
ASTM D 7779 : 2020 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM D 4018 : 2017 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
ASTM D 5450/D5450M : 2016 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM E 209 : 2018 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 292 : 2018 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM D 4317 : 2016 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
ASTM B 557M : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM C 565 : 2015 : R2021 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials
ASTM D 8255 : 2019 Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens
ASTM F 3043 : 2015 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
ASTM E 606/E606M : 2021 Standard Test Method for Strain-Controlled Fatigue Testing
ASTM F 2973 : 2021 Standard Specification for Insulating Lifting Links for Load Lifting Equipment Working Near Energized Power Lines
ASTM C 39/C39M : 2021 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D 5083 : 2017 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D 1761 : 2020 Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials
ASTM F 1624 : 2012 : R2018 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM C 773 : 1988 : R2020 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
ASTM D 7291/D7291M : 2015 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D 6464 : 2003 : REV A : R2017 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 5055 : 2019 : EDT 1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM D 7972 : 2014 : R2020 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
ASTM C 1359 : 2018 : EDT 1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
ASTM C 67/C67M : 2021 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM F 519 : 2018 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
ASTM E 647 : 2015 : EDT 1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM C 393/C393M : 2020 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM D 7030 : 2004 : R2017 Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
ASTM D 3164 : 2003 : R2017 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM D 6109 : 2019 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
ASTM D 4504 : 1994 : R2018 Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
ASTM F 1820 : 2013 Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
ASTM B 279 : 2013(R2019) Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
ASTM C 1819 : 2021 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM F 2878 : 2019 Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
ASTM B 557 : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM F 2256 : 2005 : R2015 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
ASTM F 1541 : 2017 Standard Specification and Test Methods for External Skeletal Fixation Devices
ASTM E 561 : 2020 Standard Test Method for <emph type="bdit">K<inf>R</inf></emph> Curve Determination
ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM C 1323 : 2016 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
ASTM E 1304 : 1997 : R2020 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM F 1798 : 2013 Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
ASTM F 2282 : 2018 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM A 952/A952M : 2002 : R2016 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
ASTM E 2760 : 2019 : EDT 1 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM B 533 : 1985(R2019) Standard Test Method for Peel Strength of Metal Electroplated Plastics
ASTM F 1264 : 2016 : EDT 1 Standard Specification and Test Methods for Intramedullary Fixation Devices
ASTM C 1093 : 2019 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM D 8336 : 2021 Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
ASTM F 19 : 2021 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals (Withdrawn 2023)
ASTM C 1892/C1892M : 2020 : REV A Standard Test Methods for Strength of Anchors in Masonry
ASTM G 129 : 2021 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
ASTM F 3143 : 2020 Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator
ASTM C 1624 : 2005 : R2015 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
ASTM D 4475 : 2021 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM F 1800 : 2019 : EDT 1 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
ASTM D 7205/D7205M : 2021 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM D 7914/D7914M : 2021 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C 900 : 2019 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM C 1222 : 2021 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM C 1863 : 2018 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM D 732 : 2017 Standard Test Method for Shear Strength of Plastics by Punch Tool
ASTM D 7249/D7249M : 2020 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM F 2009 : 2020 Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
ASTM F 2502 : 2017 Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants
ASTM D 4476/D4476M : 2014 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Withdrawn 2022)
ASTM D 7617/D7617M : 2011 : R2017 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM C 365/C365M : 2016 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM D 2105 : 2001 : R2019 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D 7336/D7336M : 2016 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM D 6115 : 1997 : R2019 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM F 2077 : 2018 Test Methods For Intervertebral Body Fusion Devices
ASTM D 7078/D7078M : 2020 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM C 515 : 2013 : R2018 Standard Specification for Chemical-Resistant Ceramic Tower Packings
ASTM D 7958/D7958M : 2017 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
ASTM D 6873/D6873M : 2019 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM C 1802 : 2020 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
ASTM E 1457 : 2019 : EDT 1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM D 3498 : 2019 : REV A Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing
ASTM C 1352/C1352M : 2015 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM D 2919 : 2001 : R2014 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM C 1292 : 2016 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM F 3090 : 2020 Standard Test Method for Fatigue Testing of Acetabular Devices for Total Hip Replacement
ASTM F 543 : 2017 Standard Specification and Test Methods for Metallic Medical Bone Screws
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM A 931 : 2018 Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM C 133 : 1997 : R2021 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
ASTM D 5379/D5379M : 2019 : EDT 1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D 7137/D7137M : 2017 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM C 203 : 2005 : REV A : R2017 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM F 3109 : 2016 Standard Test Method for Verification of Multi-Axis Force Measuring Platforms
ASTM D 6693/D6693M : 2020 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM E 2134/E2134M : 2014 : R2018 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
ASTM F 2345 : 2021 Standard Test Methods for Determination of Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
ASTM C 1025 : 2015 : R2020 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D 5751 : 1999 : R2019 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM F 1774 : 2020 Standard Specification for Climbing and Mountaineering Carabiners
ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM F 1147 : 2005 : R2017 : EDT 1 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM F 3067 : 2014 : R2021 Standard Guide for Radial Loading of Balloon-Expandable and Self-Expanding Vascular Stents
ASTM F 2918 : 2011 : R2015 Standard Test Method for Weighing a Bicycle
ASTM E 3121/E3121M : 2017 Standard Test Methods for Field Testing of Anchors in Concrete or Masonry
ASTM D 2344/D2344M : 2016 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 3552 : 2017 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM E 2954 : 2015 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM E 329 : 2021 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM A 981/A981M : 2011 : R2016 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
ASTM D 7615/D7615M : 2019 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D 3165 : 2007 : R2014 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM F 3295 : 2018 Standard Guide for Impingement Testing of Total Disc Prostheses
ASTM D 1037 : 2012 : R2020 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
ASTM B 769 : 2011 : R2016 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM C 1468 : 2019 : REV A Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM E 132 : 2017 Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM F 2582 : 2020 Standard Test Method for Dynamic Impingement Between Femoral and Acetabular Hip Components
ASTM D 7913/D7913M : 2014 : R2020 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM F 1362 : 2018 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM D 2095 : 1996 : R2015 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM A 944 : 2010 : R2015 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM D 7012 : 2014 : EDT 1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM C 1424 : 2015 : R2019 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM C 1499 : 2019 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM E 519/E519M : 2021 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM D 6484/D6484M : 2020 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
ASTM C 363/C363M : 2016 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM F 2267 : 2004 : R2018 Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM D 7264/D7264M : 2021 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D 8337/D8337M : 2021 Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test
ASTM E 2368 : 2010 : R2017 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM C 120/C120M : 2019 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM C 1147 : 2014 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
ASTM E 518/E518M : 2021 Standard Test Methods for Flexural Bond Strength of Masonry
ASTM F 1566 : 2014 : R2021 Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
ASTM D 7147 : 2021 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
ASTM F 382 : 2017 Standard Specification and Test Method for Metallic Bone Plates
ASTM D 202 : 2017 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D 76/D76M : 2021 Standard Specification for Tensile Testing Machines for Textiles
ASTM D 6272 : 2017 : EDT 1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM E 2472 : 2012 : R2018 : EDT 1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM F 2790 : 2010 : R2019 : EDT 1 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
ASTM D 1184 : 1998 : R2020 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
ASTM F 1772 : 2017 Standard Specification for Harnesses for Rescue and Sport Activities
ASTM C 293/C293M : 2016 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM D 198 : 2021 : REV A Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM C 1337 : 2017 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM C 198 : 2009 : R2019 Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM E 1555 : 2020 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
ASTM D 695 : 2015 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM C 1366 : 2019 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM D 575 : 1991 : R2018 Standard Test Methods for Rubber Properties in Compression
ASTM C 1230 : 1996 : R2015 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
ASTM C 497M : 2020 : REV A Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
ASTM E 9 : 2019 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM F 1839 : 2008 : R2021 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
ASTM D 143 : 2021 Standard Test Methods for Small Clear Specimens of Timber
ASTM C 1525 : 2018 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
ASTM D 8237 : 2021 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
ASTM C 497 : 2020 : EDT 1 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
ASTM C 1531 : 2016 Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
ASTM C 297/C297M : 2016 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM F 2842 : 2020 Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing
ASTM F 1956 : 2020 Standard Specification for Rescue Carabiners
ASTM C 267 : 2020 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
ASTM C 1693 : 2011 : R2017 Standard Specification for Autoclaved Aerated Concrete (AAC)
ASTM C 1077 : 2017 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM F 2408 : 2016 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
ASTM C 1360 : 2017 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM D 3967 : 2016 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM E 488/E488M : 2018 Standard Test Methods for Strength of Anchors in Concrete Elements
ASTM F 1801 : 2020 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM D 5041 : 1998 : R2019 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 790 : 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM E 2004 : 2018 Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM C 1773 : 2021 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C 1341 : 2013 : R2018 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM E 467 : 2021 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM E 564 : 2006 : R2018 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
ASTM C 749 : 2015 : R2020 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D 6862 : 2011 : R2021 Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM E 754 : 1980 : R2014 : EDT 1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM F 1875 : 1998 : R2014 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface
ASTM E 2510 : 2020 Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM C 78/C78M : 2021 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 469/C469M : 2014 : EDT 1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM F 2258 : 2005 : R2015 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
ASTM F 2458 : 2005 : R2015 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
ASTM D 7136/D7136M : 2020 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM C 947 : 2003 : R2016 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
ASTM F 2660 : 2020 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
ASTM F 2482 : 2008 : R2015 Standard Specification for Load-Indicating Externally Threaded Fasteners
ASTM A 1034/A1034M : 2010 : REV A : R2015 Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM D 5572 : 1995 : R2019 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM C 1576 : 2005 : R2017 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
ASTM F 606/F606M : 2021 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
ASTM C 140/C140M : 2021 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM D 7070 : 2016 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D 6804 : 2019 Standard Guide for Hand Hole Design in Corrugated Boxes
ASTM B 565 : 2020 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM D 3167 : 2010 : R2017 Standard Test Method for Floating Roller Peel Resistance of Adhesives
ASTM F 2255 : 2005 : R2015 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
ASTM C 473 : 2019 Standard Test Methods for Physical Testing of Gypsum Panel Products
ASTM F 2346 : 2018 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM A 370 : 2020 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM F 1044 : 2005 : R2017 : EDT 1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM D 897 : 2008 : R2016 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D 6112 : 2018 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
ASTM F 384 : 2017 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
ASTM E 74 : 2018 : EDT 1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM C 633 : 2013 : R2017 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM E 1922 : 2004 : R2015 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM F 2273 : 2011 : R2016 Standard Test Methods for Bicycle Forks
ASTM D 7033 : 2014 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
ASTM C 1684 : 2018 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM C 1674 : 2016 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM C 557 : 2003 : R2017 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 4501 : 2001 : R2014 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
ASTM C 1609/C1609M : 2019 : REV A Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C 1834 : 2016 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
ASTM E 935 : 2013 : EDT 1 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
ASTM C 1862 : 2017 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM C 1273 : 2018 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM D 5656 : 2010 : R2017 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM E 2899 : 2019 : EDT 1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM F 3359 : 2019 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM D 2290 : 2019 : REV A Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM F 2977 : 2020 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM F 1575 : 2017 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM C 1358 : 2018 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
ASTM C 1557 : 2020 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
ASTM F 1223 : 2020 Standard Test Method for Determination of Total Knee Replacement Constraint
ASTM D 3528 : 1996 : R2016 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM E 1942 : 1998 : R2018 : EDT 1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM D 642 : 2020 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
ASTM F 3111 : 2016 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
ASTM F 152 : 1995 : R2017 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
ASTM D 3433 : 1999 : R2020 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM F 2063 : 2018 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
ASTM D 7705/D7705M : 2012 : R2019 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
ASTM E 2448 : 2018 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM D 8131/D8131M : 2017 : EDT 1 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM D 7905/D7905M : 2019 : EDT 1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 1995 : 1992 : R2017 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
ASTM C 1716/C1716M : 2020 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
ASTM D 3846 : 2008 : R2015 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics (Withdrawn 2024)
ASTM C 1326 : 2013 : R2018 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM F 1701 : 2012 : R2018 Standard Specification for Unused Rope with Special Electrical Properties
ASTM D 5764 : 1997 : REV A : R2018 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
ASTM C 580 : 2018 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 4255/D4255M : 2020 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D 3916 : 2008 : R2016 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced<brk /> Plastic Rod
ASTM D 882 : 2018 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D 4688/D4688M : 2014 : R2021 : EDT 1 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
ASTM D 1634 : 2017 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM E 1405 : 1998 : R2016 Standard Specification for Laboratory Glass Distillation Flasks
ASTM D 1781 : 1998 : R2021 Standard Test Method for Climbing Drum Peel for Adhesives
ASTM D 7446 : 2009 : R2017 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
ASTM E 894 : 2018 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
ASTM C 1425 : 2019 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
ASTM D 7337/D7337M : 2012 : R2019 Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 2298 : 2018 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM D 1633 : 2017 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
ASTM C 1869 : 2018 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
ASTM D 3410/D3410M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM C 1469 : 2010 : R2015 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM D 1074 : 2017 Standard Test Method for Compressive Strength of Asphalt Mixtures
ASTM D 7966/D7966M : 2016 Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
ASTM B 831 : 2019 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM C 1421 : 2018 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM D 429 : 2014 : EDT 1 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
ASTM F 1829 : 2017 Standard Test Method for Static Evaluation of Anatomic Glenoid Locking Mechanism in Shear
ASTM D 6108 : 2019 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
ASTM C 1735 : 2017 : R2021 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing

View more information
£57.60
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.