• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AWS A5.01 : 93(R1999)

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

FILLER METAL PROCUREMENT GUIDELINES

Superseded date

23-07-2013

Published date

12-01-2013

Sorry this product is not available in your region.

Personnel
Foreword
1 Scope
2 Certification
3 Manufacturer's quality assurance system
4 Definitions and identification of materials
4.1 Introduction
4.2 Definitions
4.3 Identification of consumable inserts, brazing and
     braze welding filler metal, solid electrode wire,
     rods, strip, core wire for covered electrodes, and
     the sheath (strip or tubing) of composite
     electrodes
4.4 Identification of covering mix
4.5 Identification of core ingredients
5 Lot classification
5.1 Covered electrodes
5.2 Bare solid electrodes and rods, brazing and braze
     welding filler metal, and consumable inserts
5.3 Flux cored electrodes and metal cored electrodes
     and rods
5.4 Flux for submerged arc welding and brazing and
     braze welding
6 Level of testing
6.1 General provisions
6.2 Schedule F
6.3 Schedule G
6.4 Schedule H
6.5 Schedule I
6.6 Schedule J
6.7 Schedule K
7 Retest
8 Supplementary requirements - department of defense
8.1 Inspection requirements
8.2 Alloy identity
8.3 Responsibility for compliance
Appendix
A1 Introduction
A2 General information
AWS filler metal specifications and related documents
Tables
1 Level of testing
2 Schedule I - required tests
A1 Suggested procurement detail form for covered
     electrodes
A2 Suggested procurement detail form for bare solid
     electrodes and rods
A3 Suggested procurement detail form for flux cored
     and metal cored electrodes and rods
A4 Suggested procurement detail form for submerged arc
     electrodes and flux and brazing and braze welding
     filler metal
A5 Suggested procurement detail form for consumable
     inserts
A6 Example of use of the procurement detail form for
     covered electrodes
A7 Example of use of the procurement detail form for
     bare solid aluminum electrodes and rods

Outlines a method for providing, those details needed for procurement of filler metal to an AWS specification, being the following: the filler metal classification; the lot classification and the level of testing. Coverage includes manufacturer's quality assurance system, definitions and identification of materials, lot classification, level of testing. Also gives detailed tables.

DocumentType
Standard
PublisherName
American Welding Society
Status
Superseded
SupersededBy
Supersedes

AWS A5.4 : 92(R2000) STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR
AWS A5.11 : 1990 NICKEL AND NICKEL ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS A5.28/A5.28M : 2005 : R2015 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING
SAE AMS5839C Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al
AWS A5.7/A5.7M : 2007 SPECIFICATION FOR COPPER AND COPPER-ALLOY BARE WELDING RODS AND ELECTRODES
AWS A5.13 : 2000 SOLID SURFACING WELDING RODS AND ELECTRODES, SPECIFICATION FOR,
SAE AMS4245F Aluminum Alloy, Welding Wire 5.0Si – 1.2Cu – 0.50Mg (C355.0)
AWS A5.2 : 92(R1997) SPECIFICATIONS FOR CARBON AND LOW ALLOY STEEL RODS FOR OXYFUEL GAS WELDING
AWS D14.1/D14.1M:2005 SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
AWS A5.21 : 2001 SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING
AWS A5.20/A5.20M : 2005 SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING
MIL-STD-2219 Revision A:2005 FUSION WELDING FOR AEROSPACE APPLICATIONS
MIL-STD-278 Revision F:1987 WELDING AND CASTING STANDARD
AWS A5.7 : 1984 ERRATA 2004 COPPER AND COPPER ALLOY BARE WELDING RODS, AND ELECTRODES, SPECIFICATION FOR
AWS A5.30/A5.30M : 2007 SPECIFICATION FOR CONSUMABLE INSERTS
AWS A5.29 : 1998 SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING
AWS D3.7 : 2004 GUIDE FOR ALUMINUM HULL WELDING
ISO 13847:2013 Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
ASME PV CODE 2C : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS
AWS A5.6/A5.6M : 2008 SPECIFICATION FOR COPPER AND COPPER-ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDING
SAE AMS5675H Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni - 2.5Mn - 15.5Cr - 3.0Ti - 7.0Fe
AWS A5.5 : 1996 SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS A5.28/A5.28M : 2005 : INC : ERR 1 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING
AWS B5.4 : 2005 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
SAE AMS 5696 : 2015 STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO
AWS C5.7 : 2000 RECOMMENDED PRACTICES FOR ELECTROGAS WELDING
AWS A5.6 : 84(R2000) COVERED COPPER AND COPPER ALLOY ARC WELDING ELECTRODES, SPECIFICATION FOR
UNI EN 14163 : 2003 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES
SAE AMS4246E Aluminum Alloy, Welding Wire 7.0Si - 0.52Mg (357)
AWS D14.5/D14.5M:2009 SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS
SAE AMS5831D Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N
SAE AMS4779K Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus
SAE AMS 5694 : 2018 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 27CR - 21.5NI
SAE AMS5836D Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb)
AWS A5.1 : 91(R1999) SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
AWS D14.1 : 1997 SPECIFICATION FOR WELDING INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT
SAE AMS5778J Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72Ni – 15.5Cr – 1.0Cb(Nb) – 2.4Ti – 0.70Al – 7.0Fe
SAE AMS5679H Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe
SAE AMS4782G Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus, 2075 °F (1135 °C) Liquidus
BS EN 14163:2001 Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines
AWS A5.3/A5.3M : 1999 SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDING
SAE AMS5798H Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18Fe
AWS A5.17/A5.17M : 1997 SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
AWS A5.25 : 1991 SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES AND FLUXES FOR ELECTROSLAG WELDING
AWS A5.26 : 1991 SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDING
AWS A5.29/A5.29M : 2010 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING
AWS A5.20 : 1995 SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING
AWS A5.20/A5.20M : 2005 : R2015 SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING
AWS A5.9 : 93(R1999) BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR
AWS A5.10 : 1992 BARE ALUMINUM AND ALUMINUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR
AWS A5.3 : 1991 SPECIFICATION FOR ALUMINUM AND ALUMINUM ALLOY ELECTRODES FOR SHIELDED METAL ARC WELDING
ASME B31.5 : 2016 REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS

AWS A5.10 : 1992 BARE ALUMINUM AND ALUMINUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR
AWS A5.1 : 91(R1999) SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.