• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

CSA Z662.1 : 2013

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS

Available format(s)

Hardcopy , PDF

Superseded date

01-06-2007

Language(s)

English

Published date

01-01-2013

Preface
0 Introduction
1 Scope
2 Reference publications
3 Definitions
4 Design
5 Materials
6 Installation
7 Joining
8 Pressure testing
9 Corrosion control
10 Operating, maintenance, and upgrading
11 Offshore steel pipelines
12 Gas distribution systems
13 Reinforced composite, thermoplastic-lined and polyethylene
   pipelines
14 Oilfield steam distribution pipelines
15 Aluminum piping
16 Sour service pipelines
17 Composite-reinforced steel pipelines
Annexes
 A - Safety and loss management system
 B - Guidelines for risk assessment of pipelines
 C - Limit states design
 D - Guidelines for in-line inspection of piping for corrosion
     imperfections
 E - Recommended practice for liquid hydrocarbon pipeline
     system leak detection
 F - Slurry pipeline systems
 G - Precautions to avoid explosions of gas-air mixtures
 H - Pipeline risk dictionary
 I - Oilfield steam distribution pipelines - Alternate provisions
 J - Recommended practice for determining the acceptability of
     imperfections in fusion welds using engineering critical
     assessment
 K - Standards of acceptability for circumferential pipe butt welds
     based on fracture mechanics principles
 L - Alternate or supplementary test methods for coating property
     and characteristics evaluation
 M - Gas distribution systems integrity management guidelines
 N - Guidelines for pipeline integrity management programs
 O - Reliability-based design and assessment of onshore non-sour
     natural gas transmission pipelines

Describes background information concerning certain clauses and requirements in the Standard. Also, provides information that can be of assistance to the reader in the understanding and implementation of such requirements, and to refer to research materials that were used during the formulation of some of the requirements in the Standard.

DocumentType
Standard
Pages
167
PublisherName
Canadian Standards Association
Status
Superseded
SupersededBy
Supersedes

BS 7448-1:1991 Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials
W59-13 Welded steel construction (metal arc welding)
API STD 1104:2013 WELDING OF PIPELINES AND RELATED FACILITIES
AWWA C205 : 2012 CEMENT-MORTAR PROTECTIVE LINING AND COATING FOR STEEL WATER PIPE - 4 IN. (100 MM) AND LARGER - SHOP APPLIED
ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
MSS SP 6 : 2017 STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
CSA Z169 : M78(R1992) ALUMINUM PIPE AND PRESSURE PIPING SYSTEMS
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
CSA Z343 : 98(R2002) TEST METHODS FOR IN-LINE AND FIREBOX FLAME ARRESTERS
API 1156 : 1ED 97 ADD 1 99 EFFECTS OF SMOOTH AND ROCK DENTS ON LIQUID PETROLEUM PIPELINES (PHASE 2)
NACE RP 01 1975:1975 CONTROL OF INTERNAL CORROSION IN STEEL PIPELINES AND PIPING SYSTEMS
ASTM A 395/A395M : 1999 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
API 576 : 2017 INSPECTION OF PRESSURE-RELIEVING DEVICES
ASTM A 694/A694M : 2016 : REDLINE Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
API SPEC 15HR : 2016 HIGH-PRESSURE FIBERGLASS LINE PIPE
API 653 : 2014 TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION
API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
ASTM E 114 : 2015 : REDLINE Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ASTM A 707/A707M : 2014 : REDLINE Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
CSA W48 : 2014 FILLER METALS AND ALLIED MATERIALS FOR METAL ARC WELDING
CSA Z187 : M87(R1992) OFFSHORE PIPELINES
CAN/CSA-Z662-15 Oil and gas pipeline systems
PPI TR 3 : 2017 POLICIES AND PROCEDURES FOR DEVELOPING HYDROSTATIC DESIGN BASIS (HDB), HYDROSTATIC DESIGN STRESSES (HDS), PRESSURE DESIGN BASIS (PDB), STRENGTH DESIGN BASIS (SDB), MINIMUM REQUIRED STRENGTH (MRS) RATINGS, AND CATEGORIZED REQUIRED STRENGTH (CRS) FOR THERMOPLASTIC PIPING MATERIALS OR PIPE
AWWA C150/A21.50 : 2014 THICKNESS DESIGN OF DUCTILE-IRON PIPE
AWS A5.2 : 92(R1997) SPECIFICATIONS FOR CARBON AND LOW ALLOY STEEL RODS FOR OXYFUEL GAS WELDING
CSA Z245.20-Z245.21 : 2006 EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE
CFR 49(PTS186-199) : 0 TRANSPORTATION
AWS A5.1 : 91(R1999) SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
API 5L : 2012 LINE PIPE
ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
CSA Z183 : M90 OIL PIPELINE SYSTEMS
ISO 5579:2013 Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
Z245.15-17 Steel valves
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
ASTM A 420/A420M : 2016 : REDLINE Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ISO 15156-2:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
API 10E : 3ED 94 RECOMMENDED PRACTICE FOR APPLICATION OF CEMENT LINING TO STEEL TUBULAR GOODS, HANDLING, INSTALLATION AND JOINING
ASTM A 563 : 2015 : REDLINE Standard Specification for Carbon and Alloy Steel Nuts
NACE RP 06 75 : 1988 CORROSION CONTROL OF OFFSHORE STEEL PIPELINES
ISO 15156-3:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
API Q1 : 2013 SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
CGSB 3.5 : 2016 AMD 1 2016 AUTOMOTIVE GASOLINE
W178.2-14 Certification of welding inspectors
CSA Z245.1 : 2014 STEEL PIPE
CSA Z184 : M92 GAS PIPELINE SYSTEMS
ISO 9001:2015 Quality management systems — Requirements
ISO 15156-1:2015 Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials
ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
BS 7448-2:1997 Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
ASTM D 2290 : 2016-12 TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTIC OR REINFORCED PLASTIC PIPE
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
DIN 54109 : LATEST
ASTM D 3350 : 2014 : REDLINE Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
CGSB 48.9712 : 2014 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF PERSONNEL
CSA Z341 SERIES : 2014 STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS
API 650 : 2013 WELDED TANKS FOR OIL STORAGE
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
CSA Z245-11 : 2013 STEEL FITTINGS
ASTM D 2992 : 2012 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
CSA S471 : 2004 GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
CSA Z245-12 : 2013 STEEL FLANGES
CSA ISO 9000 : 2016 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
ASTM E 92 : 2017 : REDLINE Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

View more information
£17.08
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.