• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 12273:2008

Current
Current

The latest, up-to-date edition.

Slurry surfacing - Requirements
Published date

09-04-2008

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements
  5.1 Constituent materials
       5.1.1 General
       5.1.2 Binders
       5.1.3 Aggregates
       5.1.4 Grading curves
  5.2 Slurry surfacing
       5.2.1 Defects as determined by visual assessment
       5.2.2 Skid resistance
       5.2.3 Characterising noise generation (other
             characteristics)
  5.3 Durability
       5.3.1 General
       5.3.2 Skid resistance
       5.3.3 Bond
6 Evaluation of conformity
Annex A (normative) - Factory Production Control (FPC)
  A.1 General
  A.2 General requirements
  A.3 Product specific requirements
Annex B (normative) - Minimum test frequencies for Factory
        Production Control (FPC)
Annex C (normative) - Type Approval Installation Trial (TAIT)
  C.1 General
  C.2 Requirements
  C.3 Records
  C.4 Information availability
Annex ZA (informative) - Clauses of this European Standard
         addressing the provisions of the EU Construction
         Product Directive
  ZA.1 Scope and relevant characteristics
  ZA.2 Procedure for attestation of conformity of slurry
       surfacing
  ZA.3 CE marking and labelling
Bibliography

This European Standard specifies the performance requirements and control procedures for the installation of slurry surfacing as a product for the surface treatment of roads and other trafficked areas (e.g. footways, cycleways).This European Standard is not designed for small areas of slurry surfacing on roads that are less than 500 m2 which are not contiguous (for example minor repairs).This European Standard does not apply to slurry surfacing designed by the purchaser.This European Standard is not applicable to slurry surfacing carried out in tunnels in terms of reaction to fire. No such regulations have yet been identified, nor is there any method of classification of reaction to fire.NOTEMember States can call up the technical requirements of this European Standard for use in tunnels.This European Standard is not designed for pavements that are covered by international regulations, for example, International Civil Aviation Organisation (ICAO) regulations (airfields).

Committee
CEN/TC 227
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
I.S. EN 12273:2008 Identical
DIN EN 12273:2008-08 Identical
NF EN 12273 : 2008 Identical
NEN EN 12273 : 2008 Identical
UNE-EN 12273:2009 Identical
NS EN 12273 : 1ED 2008 Identical
BS EN 12273:2008 Identical
NBN EN 12273 : 2008 Identical
UNI EN 12273 : 2008 Identical
SN EN 12273 : 2008 Identical
PN EN 12273 : 2011 Identical

11/30249131 DC : 0 BS EN 16333 - SLURRY SURFACING - SPECIFICATION FOR AIRFIELDS

93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
EN 13075-1:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
ISO 13473-1:1997 Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth
EN 14769:2012 Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
EN 13589:2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
EN 1425:2012 Bitumen and bituminous binders - Characterization of perceptible properties
EN ISO 11819-1:2001 Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997)
ISO 11819-1:1997 Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method
EN 1429:2013 Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
EN 12274-7 : 2005 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
EN 12274-8:2005 Slurry surfacing - Test methods - Part 8: Visual assessment of defects
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN 13808:2013 Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 933-6:2014 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 13588:2017 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
EN 12847:2009 Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 58:2012 Bitumen and bituminous binders - Sampling bituminous binders
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN ISO 13473-1 : 2004 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH
EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
ISO 9001:2015 Quality management systems — Requirements
EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
EN 13075-2:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
EN 12846:2002 Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer
EN 13074:2002 Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation
EN 933-5:1998/A1:2004 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF PERCENTAGE OF CRUSHED AND BROKEN SURFACES IN COARSE AGGREGATE PARTICLES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.