• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 13478:2001+A1:2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Safety of machinery - Fire prevention and protection
Superseded date

01-01-2016

Published date

23-04-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for hazard identification
  4.1 General
  4.2 Combustible materials
  4.3 Oxidizers
  4.4 Ignition sources
5 Requirements for risk assessment
  5.1 General
  5.2 Risk analysis
  5.3 Risk evaluation
  5.4 Risk reduction
6 Requirements for technical fire prevention and protection
  measures for machinery
  6.1 General
  6.2 Design/engineering measures
  6.3 Use of integrated fire detection and fire fighting
      systems
  6.4 Additional measures
  6.5 Information for use
7 Requirements for the selection and design of technical fire
  prevention and protection measures
  7.1 Procedure
  7.2 Decisions on technical fire prevention and protection
      measures
  7.3 Selection of integrated fire detection and fire fighting
      systems in relation to the expected harm
  7.4 Safety considerations
  7.5 System parts
  7.6 Fire extinguishing agents
8 Operating conditions
Annex A (informative) - Examples of ignition sources
Annex B (informative) - Example for the design of an extinguishing
         system integrated in machinery
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU Directive
         98/37/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

This European Standard specifies methods of identification of the fire hazard resulting from machinery and theperformance of a corresponding risk assessment. It specifies the basic concepts and methodology of technicalmeasures for fire prevention and protection to be taken during the design and construction of machinery. Thepurpose of this European Standard is to reach the required safety level according to the intended use of themachinery by applying technical measures for machinery (see Figure 1, column 1). Technical measures are mainlyintegrated in the machinery and they are preferably implemented by use of safety components as defined inDirective 98/37/EC.This European Standard is applicable to the machinery given in the Council Directive of 22 June 1998 on theapproximation of the laws of the Member States relating to machinery (98/37/EC). The exclusions given in thisDirective are also relevant to this European Standard.This European Standard does not cover machinery designed to contain controlled combustion processes (e.g.internal combustion engines, furnaces), unless these processes may constitute the ignition source of a fire in otherparts of the machinery or outside of this.

Committee
CEN/TC 114
DevelopmentNote
2001 Edition Re-Issued in April 2008 & incorporates AMD 1 2008. (05/2008)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

DIN EN 1501-3:2010-06 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
DIN EN 1034-21:2012-11 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 1034-21 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
BS EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
07/30172833 DC : DRAFT DEC 2007 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
12/30243081 DC : 0 BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
DIN EN 14958:2010-10 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009)
I.S. EN 14070:2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
DIN EN 15093:2009-06 Safety of machinery - Safety requirements for hot flat rolling mills
DIN EN 15180:2015-01 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
09/30179779 DC : 0 BS EN 13457 AMD1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 15180:2014 Food processing machinery. Food depositors. Safety and hygiene requirements
12/30243084 DC : 0 BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
BS EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations
09/30202029 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
06/30157092 DC : 0 ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
08/30173506 DC : DRAFT JAN 2008 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
DIN EN 1034-16:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1034-16:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 15093:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
I.S. EN 15180:2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-26:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
I.S. EN 1034-17:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
UNI EN 15180 : 2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15061:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
I.S. EN 1501-3:2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
UNI EN 1034-21 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
DIN EN 415-7:2009-12 Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 415-5:2010-04 Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
BS EN 13457 : 2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
BS EN 1034-1 : 2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS
DIN EN 1127-2:2002-07 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
EN 1034-17:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
DIN EN 14070:2009-07 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 16191:2014 Tunnelling machinery - Safety requirements
EN 50177:2009/A1:2012 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
EN 1034-21:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
UNI EN 1034-1 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
EN ISO 80079-37:2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
EN 1034-26:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines
DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
UNE-EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
I.S. EN 13463-5:2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
BS EN ISO 80079-37:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
PREN 1672-1 : DRAFT 2012 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
BS EN 1034-16:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines
DIN EN 15188:2007-11 Determination of the spontaneous ignition behaviour of dust accumulations
08/30180312 DC : DRAFT MAR 2008 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
12/30259421 DC : 0 BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN 16191 : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
DIN EN 14958 E : 2010 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15949:2012-05 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
UNI EN 1034-26 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
BS EN 16191:2014 Tunnelling machinery. Safety requirements
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
09/30202538 DC : DRAFT JUN 2009 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
09/30201995 DC : 0 BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 1672-1:2014 Food processing machinery. Basic concepts Safety requirements
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN 50177 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 1672-1:2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
BS EN 15061 : 2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 50177:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
UNI EN 15949 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
UNI EN 1034-27 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12387:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations
I.S. EN 415-6:2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
DIN EN 13463-5:2011-10 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
I.S. EN 1127-2:2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
DIN EN 13463-5:2004-03 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
DIN EN 1034-1:2010-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010)
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 1034-1:2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 415-5:2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12387:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 13457:2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
I.S. EN 415-7:2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN ISO 16093:2017-10 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
UNI EN 12387 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
ONORM EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
PREN 50223 : DRAFT 2013 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
09/30199364 DC : 0 BS EN 13463-5 - NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
13/30284894 DC : 0 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
DIN EN ISO 80079-37:2016-12 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
12/30247814 DC : 0 BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
DIN EN 15061:2009-05 Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
11/30243078 DC : 0 BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
09/30182302 DC : 0 BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN ISO 16093:2014-03 (Draft) MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
BS EN 415-8:2008 Safety of packaging machines Strapping machines
BS EN 1034-17:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines
I.S. EN 15949:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements
BS EN 1034-21:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines
DIN EN 15094:2009-04 Safety of machinery - Safety requirements for cold flat rolling mills
DIN EN 16191:2014-09 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
BS EN 15094:2008 Safety of machinery. Safety requirements for cold flat rolling mills
14/30263884 DC : 0 BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNI EN 14753 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 15188:2007 DETERMINATION OF THE SPONTANEOUS IGNITION BEHAVIOUR OF DUST ACCUMULATIONS
BS EN 14958 : 2006 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14958:2006 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 1034-21:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
I.S. EN 50348:2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN ISO 16093:2017 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
UNI EN 1034-16 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
ISO 19372:2015 Microturbines applications — Safety
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 1127-2:2014-09 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
BS EN 13898 : 2003 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNE-EN 13463-5:2013 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 12581 : 2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 415-6 : 2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 13457 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 13463-5 : 2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 415-5 : 2010 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
UNI EN 14591-1 : 2005 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 1: 2-BAR EXPLOSION PROOF VENTILATION STRUCTURE
EN 1034-27:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
UNI EN 13898 : 2009 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNI EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
UNI EN 1127-2 : 2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNI EN 12753 : 2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
ONORM EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 415-7 : 2008 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
UNI EN 14958 : 2009 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 50223:2016 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
DIN EN 15188 E : 2007 DETERMINATION OF THE SPONTANEOUS IGNITION BEHAVIOUR OF DUST ACCUMULATIONS
BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
DIN EN 16191 E : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
DIN EN 1672-1:2014-12 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN 1034-17 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
14/30302903 DC : 0 BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
BS EN 415-10:2014 Safety of packaging machines General Requirements
EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
UNI EN 1501-3 : 2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
BS EN ISO 16093:2017 Machine tools. Safety. Sawing machines for cold metal
DIN EN 1034-17 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
PREN 15180 : DRAFT 2011 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 16093 E : 2017 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
DIN EN 1034-17:2012-11 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
DIN EN 1034-27 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
11/30251974 DC : 0 BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
BS EN 1034-27:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems
DIN EN 15061 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
DIN EN 1034-26:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
UNE-EN 1672-1:2015 Food processing machinery - Basic concepts - Part 1: Safety requirements
I.S. EN 1034-27:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
I.S. EN 16191:2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
I.S. EN ISO 80079-37:2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
UNE-EN ISO 80079-37:2018 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
BS EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
BS EN 415-5 : 2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 415-6:2014 Safety of packaging machines - Part 6: Pallet wrapping machines
UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
BS ISO 19372:2015 Microturbines applications. Safety
BS EN 415-7 : 2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
ISO 23125:2015 Machine tools Safety Turning machines
BS EN 1127-2:2014 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
ISO 80079-37:2016 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
ISO 16093:2017 Machine tools — Safety — Sawing machines for cold metal
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 13898:2003+A1:2009/AC:2010 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 1710:2005+A1:2008/AC:2010 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines
EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills
EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills
EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN 14591-1:2004/AC:2006 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 1: 2-BAR EXPLOSION PROOF VENTILATION STRUCTURE
EN 15333-1:2006/AC:2009 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines
EN 15180:2014 Food processing machinery - Food depositors - Safety and hygiene requirements
EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines
EN 14070:2003+A1:2009/AC:2010 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
DIN EN ISO 80079-37 E : 2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
UNE-EN 50177:2010 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
BS EN 1034-26:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll packaging machines
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
12/30243459 DC : 0 BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
DIN EN 415-8:2011-06 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
DIN EN 1034-27:2012-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
PREN 13463-5 : DRAFT 2009 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
DIN EN 15180 E : 2015 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 23125:2015 Machine tools. Safety. Turning machines
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
DIN EN 15094 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
CEI EN 50348 : 2011 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 415-8:2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNI EN 1672-1 : 2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
I.S. EN 50223:2015 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
DIN EN 415-6:2013-09 Safety of packaging machines - Part 6: Pallet wrapping machines
DIN EN 13457:2010-10 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010
DIN EN 14591-1:2004-12 Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar-explosion proof ventilation structure
BS EN 14591-1:2004 Explosion prevention and protection in underground mines. Protective systems 2-bar explosion proof ventilation structure
BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 12387 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
BS EN 415-6:2013 Safety of packaging machines Pallet wrapping machines
BS EN 13852-1:2013 Cranes. Offshore cranes General-purpose offshore cranes
BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements
EN 1034-16:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines
DIN EN 13898:2009-09 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
EN 12111:2014 Tunnelling machines - Road headers and continuous miners - Safety requirements
UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 15746-2:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
ISO 6183:2009 Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 3-5:1996/AC:1997 PORTABLE FIRE EXTINGUISHERS - SPECIFICATION AND SUPPLEMENTARY TESTS
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
ISO/IEC Guide 52:1990 Glossary of fire terms and definitions
EN 3-4 : 1996 PORTABLE FIRE EXTINGUISHERS - CHARGES, MINIMUM REQUIRED FIRE
EN 3-1 : 1996 PORTABLE FIRE EXTINGUISHERS - PART 1: DESCRIPTION, DURATION OF OPERATION, CLASS A AND B FIRE TEST
EN 3-2 : 1996 PORTABLE FIRE EXTINGUISHERS - PART 2: TIGHTNESS, DIELECTRIC TEST, TAMPING TEST, SPECIAL PROVISIONS
ISO 4880:1997 Burning behaviour of textiles and textile products Vocabulary
EN 3-6:1995/A1:1999 PORTABLE FIRE EXTINGUISHERS - PROVISIONS FOR THE ATTESTATION OF CONFORMITY OF PORTABLE FIRE EXTINGUISHERS IN ACCORDANCE WITH EN 3 PART 1 TO PART 5
EN 22719 : 1993 PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN 3-3 : 1994 PORTABLE FIRE EXTINGUISHERS - PART 3: CONSTRUCTION, RESISTANCE TO PRESSURE, MECHANICAL TESTS
EN 2:1992/A1:2004 CLASSIFICATION OF FIRES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.