• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1995-1-1:2004/A2:2014

Current
Current

The latest, up-to-date edition.

EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
Published date

07-05-2014

Foreword
SECTION 1: GENERAL
SECTION 2: BASIS OF DESIGN
SECTION 3: MATERIAL PROPERTIES
SECTION 4: DURABILITY
SECTION 5: BASIS OF STRUCTURAL ANALYSIS
SECTION 6: ULTIMATE LIMIT STATES
SECTION 7: SERVICEABILITY LIMIT STATES
SECTION 8: CONNECTIONS WITH METAL FASTENERS
SECTION 9: COMPONENTS AND ASSEMBLIES
SECTION 10: STRUCTURAL DETAILING AND CONTROL
ANNEX A (INFORMATIVE): BLOCK SHEAR AND PLUG SHEAR FAILURE
        AT MULTIPLE DOWEL-TYPE STEEL-TO-TIMBER CONNECTIONS
ANNEX B (INFORMATIVE): MECHANICALLY JOINTED BEAMS
ANNEX C (INFORMATIVE): BUILT-UP COLUMNS
ANNEX D (INFORMATIVE): BIBLIOGRAPHY

General rules for the structural design of buildings and civil engineering works made of timber and/or wood-based panels, either singly or compositely with concrete, steel or other materials.

Committee
CEN/TC 250
DevelopmentNote
Supersedes ENV 1995-1-1. (12/2004)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

PREN 13830 : DRAFT 2013 CURTAIN WALLING - PRODUCT STANDARD
PREN 15497 : DRAFT 2011 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
04/30124505 DC : 0 EN 15080-8 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
PD CEN/TS 15912:2012 Durability of reaction to fire performance. Classes of fire-retardant treated wood-based product in interior and exterior end use applications
UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
I.S. EN 1995-2:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 2: BRIDGES (INCLUDING IRISH NATIONAL ANNEX)
11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
02/106055 DC : 0 PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
12/30248282 DC : 0 BS EN 12811-4 - TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
08/30152055 DC : DRAFT APR 2008 BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
FD CEN/TR 16239 : 2011 FD INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS
UNE-EN 1156:2013 Wood-based panels - Determination of duration of load and creep factors
S.R. CEN/TS 16368:2014 LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
15/30296765 DC : 0 BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
DIN EN 15644 E : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
08/30181440 DC : DRAFT JULY 2008 BS EN 622-4 - FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS
PD CEN/TR 12872:2014 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
DIN EN 14272:2012-03 Plywood - Calculation method for some mechanical properties; German version EN 14272:2011
11/30238453 DC : 0 BS EN 1156 - WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS
09/30201231 DC : 0 BS EN 15080-13 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 13: LOADBEARING COLUMNS
PREN 12871 : DRAFT 2011 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
DIN EN 1999-1-4:2010-05 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007 + AC:2009
ISO 16894:2009 Wood-based panels Oriented strand board (OSB) Definitions, classification and specifications
I.S. EN 335:2013 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - USE CLASSES: DEFINITIONS, APPLICATION TO SOLID WOOD AND WOOD-BASED PRODUCTS
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 622-4:2009 FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS
I.S. EN 301:2017 ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
UNE-EN 1998-1:2011 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
UNE-EN 622-4:2010 Fibreboards - Specifications - Part 4: Requirements for softboards
EN 1998-1:2004/A1:2013 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
DIN EN 14250 E : 2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
BS EN 300:2006 Oriented strand boards (OSB). Definitions, classification and specifications
UNE-EN 301:2014 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
BS EN 14279 : 2004 LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
BS EN 15197:2007 Wood-based panels. Flaxboards. Specifications
14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
BS EN 520 : 2004 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 312:2010 Particleboards. Specifications
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
DIN EN 634-2:2007-05 CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERIOR CONDITIONS
EN 14229:2010 Structural timber - Wood poles for overhead lines
EN 12369-3:2008 Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels
DIN EN 13830:2015-07 CURTAIN WALLING - PRODUCT STANDARD
EN 13353:2008+A1:2011 Solid wood panels (SWP) - Requirements
EN 12899-1:2007 Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 12369-2:2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
CEN/TS 12872:2007 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
EN 16755:2017 Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
CEN/TS 15679:2007 Thermal Modified Timber - Definitions and characteristics
CEN/TS 16526:2013 Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics
EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
CEN/TS 16368:2014 Lightweight Particleboards - Specifications
EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 1156:2013 Wood-based panels - Determination of duration of load and creep factors
NF EN 13353 : 2009 + A1 2011 SOLID WOOD PANELS (SWP) - REQUIREMENTS
ONORM EN 12369-3 : 2009 WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS
I.S. EN 335-1:2006 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 1: GENERAL
ISO/TR 18267:2013 Timber structures Review of design standards
BS EN 14545:2008 Timber structures. Connectors. Requirements
04/30088576 DC : DRAFT OCT 2004 EN 335-2 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 2: APPLICATION TO SOLID WOOD
14/30312146 DC : 0 BS EN 1090-5 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED ALUMINIUM ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
DD CEN/TS 12872:2007 Wood-based panels. Guidance on the use of load-bearing boards in floors, walls and roofs
PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
DIN EN 13381-1:2014-12 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
I.S. EN 1995-1-2:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
10/30234290 DC : 0 BS EN 636 - PLYWOOD - SPECIFICATIONS
UNI EN 15644 : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
BS EN 335:2013 Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products
DIN EN 14229:2011-02 Structural timber - Wood poles for overhead lines
12/30272145 DC : 0 BS EN 16508 - TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN
BS EN 12369-3:2008 Wood-based panels. Characteristic values for structural design Solid-wood panels
DIN EN 15497:2014-07 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 16481:2014-09 TIMBER STAIRS - STRUCTURAL DESIGN
11/30236369 DC : 0 BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER
BS EN 16351:2015 Timber structures. Cross laminated timber. Requirements
13/30281348 DC : 0 BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
BS EN 13354:2008 Solid wood panels (SWP). Bonding quality. Test method
BS EN 16681:2016 Steel static storage systems. Adjustable pallet racking systems. Principles for seismic design
BS EN 15425:2017 Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements
PREN 13107 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
PREN 14374 : DRAFT 2016 TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
UNI EN 15497 : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 12811-4:2013 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
S.R. CEN/TR 12872:2014 WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
ISO 22452:2011 Timber structures Structural insulated panel walls Test methods
I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
BS EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
UNI EN 14272 : 2012 PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES
PREN 636 : DRAFT 2010 PLYWOOD - SPECIFICATIONS
UNE-EN 335:2013 Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
UNE-EN 16681:2016 Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
UNI EN 13381-1 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
ISO 17842-1:2015 Safety of amusement rides and amusement devices — Part 1: Design and manufacture
UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
DIN EN 12899-1:2008-02 FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
DIN EN 12871:2013-09 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
DIN EN 13986:2015-06 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN 622-5:2010-03 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
DIN EN 1995-1-2 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
DIN EN 14250:2010-05 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
UNE-EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
BS EN 12871:2013 Wood-based panels. Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
UNE-EN 622-5:2010 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
BS EN 1995-2:2004 Eurocode 5. Design of timber structures Bridges
I.S. EN 13830:2015 CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 622-5:2009 FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF)
I.S. EN 634-2:2007 CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS
I.S. EN 13353:2008 SOLID WOOD PANELS (SWP) - REQUIREMENTS
I.S. EN 300:2006 ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 636:2012 PLYWOOD - SPECIFICATIONS
I.S. EN 312:2010 PARTICLEBOARDS - SPECIFICATIONS
I.S. EN 13986:2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 520:2005 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 12871:2013 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
I.S. EN 14250:2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
I.S. EN 12899-1:2007 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 12369-2:2011 WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD
I.S. EN 1004:2005 MOBILE ACCESS AND WORKING TOWERS MADE OF PREFABRICATED ELEMENTS - MATERIALS, DIMENSIONS, DESIGN LOADS, SAFETY AND PERFORMANCE REQUIREMENTS
I.S. EN 14279:2005 LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN 13374:2013-07 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
EN 16351:2015 Timber structures - Cross laminated timber - Requirements
UNI EN 12369-2 : 2011 WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD
VDI 6012 Blatt 1.4:2016-01 Integration of distributed and renewables-based energy systems in buildings - Fundamentals - Fixing of solar modules and solar collectors on buildings
VDI 2038 Blatt 1:2012-06 Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics, methods, procedures and loads
04/30088573 DC : DRAFT OCT 2004 EN 335-1 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 1: GENERAL
11/30253904 DC : 0 BS EN 12871 - WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
PREN 12369-2 : DRAFT 2009 WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD
UNE-EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
I.S. EN 15080-8:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
DIN EN 16351 E : 2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
UNI EN 12811-4 : 2014 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
DIN EN 1156:2013-10 WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS
BS EN 15497:2014 Structural finger jointed solid timber. Performance requirements and minimum production requirements
DIN EN 12369-3:2009-02 Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels
09/30200047 DC : 0 BS EN 12369-2 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD
BS EN 1999-1-4 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
UNI CEN/TS 15912 : 2012 DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
PD CEN/TS 16368:2014 Lightweight Particleboards. Specifications
I.S. CEN TS 13381-1:2006 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
12/30254092 DC : 0 BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
DIN EN 14229 E : 2011 STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES
07/30161334 DC : 0 BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
13/30275585 DC : 0 BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
11/30252464 DC : 0 BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
DIN EN 16481 E : 2014 TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
09/30211230 DC : 0 BS EN 14272 - PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 16784:2016 TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF THE LONG TERM BEHAVIOUR OF COATED AND UNCOATED DOWEL-TYPE FASTENERS
11/30247793 DC : 0 BS EN 335 - DURABILITY OF WOOD AND WOOD- BASED PRODUCTS - USE CLASSES: DEFINITIONS, APPLICATION TO SOLID WOOD AND WOOD BASED PANELS
UNI CEN/TS 13381-1 : 2006 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
07/30160760 DC : 0 BS EN 13353 - SOLID WOOD PANELS (SWP) - REQUIREMENTS
PREN 17121 : DRAFT 2017 CONSERVATION OF CULTURAL HERITAGE - HISTORIC TIMBER STRUCTURES - GUIDELINES FOR THE ON SITE ASSESSMENT
DD CEN/TS 15679:2007 Thermal modified timber. Definitions and characteristics
DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
S.R. CEN TS 12872:2007 WOOD-BASED PANELS - GUIDANCE ON THE USE OF LOAD-BEARING BOARDS IN FLOORS, WALLS AND ROOFS
UNE-EN 16755:2018 Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications
PREN 13381-1 : DRAFT 2011 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
EN 13374:2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
I.S. EN 14272:2011 PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES
I.S. EN 16481:2014 TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
S.R. CEN/TS 16526:2013 SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
UNE-CEN/TS 15679:2009 EX Thermal Modified Timber - Definitions and characteristics
I.S. EN 1999-1-4:2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING (INCLUDING IRISH NATIONAL ANNEX)
CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
UNE-CEN/TS 15912:2012 EX Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications
UNI CEN/TS 16368 : 2014 LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
PREN 1156 : DRAFT 2011 WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS
UNI EN 1999-1-4 : 2011 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
I.S. EN 15425:2017 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
I.S. EN 15644:2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
DIN EN 1004:2005-03 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 636:2015-05 PLYWOOD - SPECIFICATIONS
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 335-1:2006 Durabiltity of wood and wood-based products. Definitions of use classes General
UNE-EN 13830:2016 Curtain walling - Product standard
BS EN 634-2:2007 Cement-bonded particleboards. Specifications Requirements for OPC bonded particleboards for use in dry, humid and external conditions
EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
I.S. EN 14080:2013 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
EN 13830:2015 Curtain walling - Product standard
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 634-2:2007 Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
EN 1995-2:2004 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 13964:2014 Suspended ceilings - Requirements and test methods
EN 15197:2007 Wood-based panels - Flaxboards - Specifications
UNI EN 622-4 : 2010 FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS
UNI EN 312 : 2010 PARTICLEBOARDS - SPECIFICATIONS
UNI EN 622-5 : 2010 FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF)
UNI EN 15095 : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
UNI EN 520 : 2009 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
UNI EN 1995-1-2 : 2005 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
UNI EN 14080 : 2013 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
UNI EN 13353 : 2011 SOLID WOOD PANELS (SWP) - REQUIREMENTS
UNI CEN/TS 16526 : 2014 SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 14250 : 2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
UNI EN 12871 : 2013 WOOD-BASED PANELS - DETERMINATION OF PERFORMANCE CHARACTERISTICS FOR LOAD BEARING PANELS FOR USE IN FLOORS, ROOFS AND WALLS
EN 622-5:2009 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
UNI EN 12899-1 : 2008 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
UNI EN 14279 : 2009 LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
UNE-EN 16784:2016 Timber Structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
11/30253733 DC : 0 BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
BS EN 16784:2016 Timber structures. Test methods. Determination of the long term behaviour of coated and uncoated dowel-type fasteners
UNI EN 1156 : 2013 WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS
BS EN 16481:2014 Timber stairs. Structural design. Calculation methods
S.R. CEN/TS 15912:2012 DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD-BASED PRODUCT IN INTERIOR AND EXTERIOR END USE APPLICATIONS
DIN EN 16351:2015-12 Timber structures - Cross laminated timber - Requirements
BS EN 16254 : 2013 ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
BS EN 1156:2013 Wood-based panels. Determination of duration of load and creep factors
I.S. EN 15497:2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
11/30249114 DC : 0 BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 14545 E : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
BS EN 15080-8:2009 Extended application of results from fire resistance tests Beams
UNI EN 14545 : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
UNI EN 12369-3 : 2009 WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS
11/30250535 DC : DRAFT DEC 2011 BS EN 13374 - TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
09/30186600 DC : 0 BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
BS EN 14229:2010 Structural timber. Wood poles for overhead lines
PD CEN/TS 16526:2013 Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics
08/30181443 DC : DRAFT JULY 2008 BS EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF)
15/30326222 DC : 0 BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
UNI EN 335 : 2013 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - USE CLASSES: DEFINITIONS, APPLICATION TO SOLID WOOD AND WOOD-BASED PRODUCTS
BS EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes
DIN EN 15080-8:2010-02 Extended application of results from fire resistance tests - Part 8: Beams
UNI CEN/TS 15679 : 2008 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
UNI EN 15080-8 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
I.S. EN 16351:2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
DIN EN 335:2013-06 Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
11/30240279 DC : DRAFT MAR 2011 BS EN 16254 - ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
09/30193698 DC : DRAFT JAN 2009 BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS
UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
BS EN 12811-4:2013 Temporary works equipment Protection fans for scaffolds. Performance requirements and product design
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
DIN EN 15425 E : 2008 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
UNE-EN 1995-1-2:2016 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design.
PREN 301 : DRAFT 2015 ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
I.S. EN 13381-1:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES
I.S. EN 16254:2013 ADHESIVES - EMULSION POLYMERIZED ISOCYANATE (EPI) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
UNI EN 14229 : 2010 STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES
15/30326160 DC : 0 BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
I.S. EN 1156:2013 WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS
PREN 15425 : DRAFT 2015 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
17/30357806 DC : 0 BS EN 17121 - CONSERVATION OF CULTURAL HERITAGE - HISTORIC TIMBER STRUCTURES - GUIDELINES FOR THE ON SITE ASSESSMENT
PREN 13031-1 : DRAFT 2017 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
I.S. EN 16681:2016 STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR SEISMIC DESIGN
ISO/TR 12910:2010 Light-frame timber construction Comparison of four national design documents
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 12369-3:2009 WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS
I.S. EN 14545:2008 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
DIN EN 1998-1:2010-12 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings (includes Corrigendum AC:2009)
DIN EN 14755 E : 2006 EXTRUDED PARTICLEBOARDS - SPECIFICATIONS
DIN EN 1995-2:2010-12 Eurocode 5: Design of timber structures - Part 2: Bridges
DIN EN 300:2006-09 ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN 14080:2013-09 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
BS EN 14755:2005 Extruded particleboards. Specifications
UNE-EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
BS ISO 17842-1:2015 Safety of amusement rides and amusement devices Design and manufacture
BS EN 13353 : 2008 SOLID WOOD PANELS (SWP) - REQUIREMENTS
UNE-EN 16351:2016 Timber structures - Cross laminated timber - Requirements
BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
BS EN 622-4:2009 Fibreboards. Specifications Requirements for softboards
UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
UNE-EN 13353:2009 Solid wood panels (SWP) - Requirements
BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures General - Structural fire design
DIN EN 15197:2007-05 Wood-based panels - Flaxboards - Specifications
UNE-EN 312:2010 Particleboards - Specifications
BS EN 12369-2:2011 Wood-based panels. Characteristic values for structural design Plywood
BS EN 1998-1 : 2004 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
BS EN 14250:2010 Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 13374 : 2013 TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS
BS EN 13830:2015 Curtain walling. Product standard
UNE-EN 520:2005 Gypsum plasterboards - Definitions, requirements and test methods
BS EN 14080:2013 Timber structures. Glued laminated timber and glued solid timber. Requirements
UNE-EN 12369-2:2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
UNE-EN 13986:2006 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 15197 E : 2007 WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS
EN 14755:2005 Extruded particleboards - Specifications
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN 16481:2014 Timber stairs - Structural design - Calculation methods
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
EN 622-4:2009 Fibreboards - Specifications - Part 4: Requirements for softboards
EN 16681:2016 Steel static storage systems - Adjustable pallet racking systems - Principles for seismic design
EN 16254:2013+A1:2016 Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements
EN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 14272:2011 Plywood - Calculation method for some mechanical properties
EN 14545:2008 Timber structures - Connectors - Requirements
EN 15080-8:2009 Extended application of results from fire resistance tests - Part 8: Beams
EN 16784:2016 Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements
EN 636:2012+A1:2015 Plywood - Specifications
EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
EN 335-1:2006 Durability of wood and wood- based products - Definition of use classes - Part 1: General
EN 335:2013 Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
EN 312:2010 Particleboards - Specifications
EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
EN 300:2006 Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
I.S. EN 16755:2017 DURABILITY OF REACTION TO FIRE PERFORMANCE - CLASSES OF FIRE-RETARDANT TREATED WOOD PRODUCTS IN INTERIOR AND EXTERIOR END USE APPLICATIONS
PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
PD CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
DIN EN 15425:2015-06 (Draft) ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
DD CEN/TS 13381-1:2005 Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes
DIN EN 12811-4 E : 2014 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
UNE-EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
12/30266868 DC : 0 BS EN 16481 - TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHOD
DIN EN 15644:2009-03 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
07/30160738 DC : 0 BS EN 12369-3 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS
DIN EN 14545:2009-02 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
DIN EN 12811-4:2014-03 TEMPORARY WORKS EQUIPMENT - PART 4: PROTECTION FANS FOR SCAFFOLDS - PERFORMANCE REQUIREMENTS AND PRODUCT DESIGN
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
07/30152878 DC : DRAFT AUG 2007 BS EN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
DIN EN 15497 E : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
07/30160763 DC : 0 BS EN 13354 - SOLID WOOD PANELS - BONDING QUALITY - TEST METHOD
BS EN 14272:2011 Plywood. Calculation method for some mechanical properties
11/30253102 DC : 0 BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
08/30171383 DC : DRAFT JUNE 2008 BS EN 12871 - WOOD-BASED PANELS - PERFORMANCE SPECIFICATIONS AND REQUIREMENTS FOR LOAD BEARING BOARDS FOR USE IN FLOORS, WALLS AND ROOFS
UNE-EN 12811-4:2015 Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
06/30151880 DC : 0 BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN
DIN EN 13354:2009-02 SOLID WOOD PANELS (SWP) - BONDING QUALITY - TEST METHOD
I.S. EN 14229:2010 STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 13381-1:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
UNI EN 16481 : 2014 TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
I.S. EN 16153:2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 15080-8:2011 Extended application of results from fire resistance tests - Part 8: Beams
UNE-EN 1995-2:2016 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
17/30354665 DC : 0 BS EN 13031-1 - GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
UNI EN 13354 : 2009 SOLID WOOD PANELS (SWP) - BONDING QUALITY - TEST METHOD
UNE-EN 14272:2012 Plywood - Calculation method for some mechanical properties
S.R. CEN/TS 15679:2007 THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS
I.S. EN 13354:2009 SOLID WOOD PANELS (SWP) - BONDING QUALITY - TEST METHOD
EN 1999-1-4:2007/A1:2011 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-4: COLD-FORMED STRUCTURAL SHEETING
DIN EN 14279 E : 2009 LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN 13353:2011-07 Solid wood panels (SWP) - Requirements (includes Amendment A1:2011)
DIN EN 12369-2:2011-09 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009)
DIN EN 622-4:2010-03 FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
BS EN 13986 : 2004 WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 636 : 2012 PLYWOOD - SPECIFICATIONS
BS EN 622-5:2009 Fibreboards. Specifications Requirements for dry process boards (MDF)
BS EN 1004:2004 Mobile access and working towers made of prefabricated elements. Materials, dimensions, design loads, safety and performance requirements
EN 12811-4:2013 Temporary works equipment - Part 4: Protection fans for scaffolds - Performance requirements and product design
CEN/TS 13381-1:2005 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
DIN EN 1995-1-2:2010-12 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009)
I.S. EN 1998-1:2005 EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
DIN EN 312:2010-12 Particleboards - Specifications
EN 1004:2004 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
CEN/TS 15912:2012 Durability of reaction to fire performance - Classes of fire-retardant treated wood-based product in interior and exterior end use applications
CEN/TR 12872:2014 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
EN 13354:2008 Solid wood panels (SWP) - Bonding quality - Test method
DIN EN 14279:2009-07 LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN 15425:2008-06 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
DIN EN 14755:2006-01 Extruded particleboards - Specifications
UNE-EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
UNE-EN 13986:2006+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
UNE-EN 16254:2014 Adhesives - Emulsion polymerized isocyanate (EPI) for load-bearing timber structures - Classification and performance requirements

EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN 1194:1999 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
EN 335-2:2006 Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
ISO 8970:2010 Timber structures Testing of joints made with mechanical fasteners Requirements for wood density
EN 1991-1-6:2005/AC:2013 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 636-2 : 1996 PLYWOOD - SPECIFICATIONS - PART 2: REQUIREMENTS FOR PLYWOOD FOR USE IN HUMID CONDITIONS
EN 636-3 : 1996 PLYWOOD - SPECIFICATIONS - PART 3: REQUIREMENTS FOR PLYWOOD FOR USE IN EXTERIOR CONDITIONS
EN 351-1:2007 Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
EN 14545:2008 Timber structures - Connectors - Requirements
EN 1991-1-7:2006/A1:2014 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-7: GENERAL ACTIONS - ACCIDENTAL ACTIONS
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 300:2006 Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 1991-1-3:2003/A1:2015 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS
EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN 312-7 : 1997 PARTICLEBOARDS - SPECIFICATIONS - PART 7: REQUIREMENTS FOR HEAVY DUTY LOAD-BEARING BOARDS FOR USE IN HUMID CONDITIONS
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 1382:2016 Timber Structures - Test methods - Withdrawal capacity of timber fasteners
EN 312:2010 Particleboards - Specifications
EN 622-5:2009 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
ISO 2081:2008 Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel
EN 1383:2016 Timber structures - Test methods - Pull through resistance of timber fasteners
EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
EN 350-2:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
EN 912:2011 Timber fasteners - Specifications for connectors for timbers
EN 26891:1991 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983)
EN 14081-1:2016 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 28970 : 1991 TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY
EN 1991-1-5:2003/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-5: GENERAL ACTIONS - THERMAL ACTIONS
EN 1381:2016 Timber structures - Test methods - Load bearing stapled joints
EN 636-1 : 1996 PLYWOOD - SPECIFICATIONS - PART 1: REQUIREMENTS FOR PLYWOOD FOR USE IN DRY CONDITIONS
EN 312-4 : 1996 PARTICLEBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR LOAD-BEARING BOARDS FOR USE IN DRY CONDITIONS
EN 312-5 : 1997 PARTICLEBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR LOAD-BEARING BOARDS FOR USE IN HUMID CONDITIONS
ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
EN 1991-1-1:2002/AC:2009 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-1: GENERAL ACTIONS - DENSITIES, SELF-WEIGHT, IMPOSED LOADS FOR BUILDINGS
EN 385:2001 Finger jointed structural timber - Performance requirements and minimum production requirements
EN 14374:2004 Timber structures - Structural laminated veneer lumber - Requirements
EN 335-3:1995 Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
EN 338:2016 Structural timber - Strength classes
EN 312-6 : 1996 PARTICLEBOARDS - SPECIFICATIONS - PART 6: REQUIREMENTS FOR HEAVY DUTY LOAD-BEARING BOARDS FOR USE IN DRY CONDITIONS
EN 13271:2001/AC:2003 TIMBER FASTENERS - CHARACTERISTIC LOAD-CARRYING CAPACITIES AND SLIP-MODULI FOR CONNECTOR JOINTS
EN 460:1994 Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
EN 622-3:2004 Fibreboards - Specifications - Part 3: Requirements for medium boards
EN 622-2:2004/AC:2005 FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS
EN 622-4:2009 Fibreboards - Specifications - Part 4: Requirements for softboards
EN 387:2001 Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements
EN 14358:2016 Timber structures - Calculation and verification of characteristic values
EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
EN 1075:2014 Timber structures - Test methods - Joints made with punched metal plate fasteners
EN 335-1:2006 Durability of wood and wood- based products - Definition of use classes - Part 1: General
EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
EN 636:2012+A1:2015 Plywood - Specifications
EN 409:2009 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners
EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.