• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60130-9:2011

Current

Current

The latest, up-to-date edition.

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Published date

01-04-2011

FOREWORD
1 Scope
2 Normative references
3 Technical information
4 Dimensional information
5 Gauges
6 Characteristics
7 Schedule for type tests
Annex A (normative) - Description of the connectors
Annex B (normative) - Measurement of individual contacts
        (resilient contacts only)
Annex C (informative) - Examples of circuitry of connector
        with switch
Bibliography
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications

IEC 60139-9:2011 relates to circular connectors for radio and associated sound equipment. This fourth edition cancels and replaces the third edition of IEC 60130-9, published in 2000, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- the scope has been amended to clarify its separation through its field of application, from IEC 61076-2-106;
- 8-pole connector styles 60130-9 IEC-22 through 60130-9 IEC-25 with screw locking have been deleted as obsolete and overlapping with some styles of IEC 61076-2-106;
- application and connections in Table 1 have been deleted because of referencing obsolete sound equipment. Titles of the dimension sheets and the clause headlines of Annex A have been amended accordingly;
- the reference to safety requirements according to IEC 60065 has been deleted.

Committee
CLC/SR 48B
DevelopmentNote
Supersedes UNE EN 60130-9. (04/2014)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

EN 63035:2017 MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015)
12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
CEI EN 60728-5 : 2016 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT
BS EN 50083-5:2002 Cabled distribution systems for television and sound signals Headend equipment
BS EN 63035:2017 MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged Edition, 2015)
UNE-EN 61938:2014 Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability
BS EN 61319-1:1996 Interconnections of satellite receiving equipment Europe
BS EN 60728-5:2008 Cable networks for television signals, sound signals and interactive services Headend equipment
I.S. EN 50083-5:2001 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT
CEI EN 63035 : 1ED 2018 MIDI (MUSICAL INSTRUMENT DIGITAL INTERFACE) SPECIFICATION 1.0 (ABRIDGED EDITION, 2015)
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
CEI EN 61938 : 2014 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY
I.S. EN 61319-1:1999 INTERCONNECTIONS OF SATELLITE RECEIVING EQUIPMENT - PART 1: EUROPE
I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 63035:2017 MIDI (MUSICAL INSTRUMENT DIGITAL INTERFACE) SPECIFICATION 1.0 (ABRIDGED EDITION, 2015)
BS EN 60694:1997 Common specifications for high-voltage switchgear and controlgear standards
BS EN 61938:2013 Multimedia systems. Guide to the recommended characteristics of analogue interfaces to achieve interoperability
I.S. EN 61938:2013 MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2013 (EQV))
EN 50083-5:2001 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
EN 60728-5:2016 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
EN 61319-1:1996/A11:1999 INTERCONNECTIONS OF SATELLITE RECEIVING EQUIPMENT - PART 1: EUROPE

IEC 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
IEC 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
IEC 61076-2-106:2011 Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
IEC 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
EN 60512-11-1:1999 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
EN 60512-11-12 : 2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60512-13-2:2006 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
EN 61076-2-106:2011 Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
EN 60512-17-4 : 2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
EN 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
IEC 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
EN 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
EN 60512-13-2 : 2006 COR 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES
IEC 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
IEC 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
EN 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass
IEC 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
IEC 60512-11-1:1995 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
IEC 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
IEC 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
IEC 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
EN 60512-17-2 : 2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
IEC 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
IEC 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
IEC 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
IEC 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
IEC 60512-1-2:2002 Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass
EN 60512-9-1 : 2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact
EN 60512-17-3 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE)
EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.