• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60445:2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

16-07-2021

Published date

04-08-2017

IEC 60445:2017 is now available as IEC 60445:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60445:2017 applies to the identification and marking of terminals of electrical equipment such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever applicable, to combinations of such equipment (e.g. assemblies), and also applies to the identification of terminations of certain designated conductors. It also provides general rules for the use of certain colours or alphanumeric notations to identify conductors with the aim of avoiding ambiguity and ensuring safe operation. These conductor colours or alphanumeric notations are intended to be applied in cables or cores, busbars, electrical equipment and installations. This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.
It has the status of a basic safety publication in accordance with IEC Guide 104. This sixth edition cancels and replaces the fifth edition of IEC 60445, published in 2010. This edition includes the following significant technical changes with respect to the previous edition:
a) the text of the introduction has been moved into the scope in accordance with IEC Guide 104;
b) colour codes for the identification of line conductors of DC systems;
c) colour code for the identification of functional earthing conductor;
d) update of Table A.1with colour codes for DC line conductors;
e) conversion of notes containing non-mandatory requirements to normative text;
f) the terminology is aligned with IEC 60050-195.
The contents of the corrigendum of November 2017 have been included in this copy.

Committee
TC 3
DevelopmentNote
Supersedes IEC 60446. (08/2010) Stability Date: 2021. (08/2017)
DocumentType
Standard
Pages
54
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
BS EN 60445:2010 Identical
DIN EN 60445 : 2011 Identical
CEI EN 60445 : 2011 Identical
UNE-EN 60445:2017 Identical
UNE-EN 60445:2012 Identical
JIS C 0445:1999 Identical
DIN V 42403:1986-12 Similar to
NFC 04 445 : AMD 1 07 81 Identical
PN EN 60445 : 2018 Identical
BS EN 60445:2017 Identical
PNE-prEN 60445:2016 Identical
NBN EN 60445 : 2011 Identical
BS 5559:1978 Identical
NEN EN IEC 60445 : 2018 Identical
UNE-EN 60445:2007 Identical
UNE 20132:1991 Identical
BS 5559:1991 Identical
SAC GB/T 4026 : 1992 Identical
DIN 42404:1985-07 Corresponds
EN 60445:2017 Identical
CEI 16-2 : 1ED 1979 Identical
NEN 10445 : 1991 Identical
VDE 0197 : 2018-02 Identical
SN EN 60445 : 2000 Identical
HD 241 : 200S2 Identical

UNE-EN 60947-5-3:2014 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
UNE-EN 50620:2017 Electric cables - Charging cables for electric vehicles
I.S. HD 60364-1:2008 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
CEI EN 61056-2 : 2014 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING
BS EN 61148:2012 Terminal markings for valve device stacks and assemblies and for power conversion equipment
BS EN 81714-2:2007 Design of graphical symbols for use in the technical documentation of products Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
15/30314469 DC : 0 BS EN 62548 ED.1 - PHOTOVOLTAIC (PV) ARRAYS - DESIGN REQUIREMENTS
DIN 40900-3:1988-03 GRAPHICAL SYMBOLS FOR DIAGRAMS; CONDUCTORS CONNECTING DEVICES
13/30288591 DC : 0 BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE
10/30235503 DC : 0 BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
DIN 42400 : 1983 TERMINAL MARKINGS FOR ELECTRICAL EQUIPMENT - GENERAL RULES, ALPHANUMERIC SYSTEM
BS EN 60947-5-3:2013 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
PD ISO/TS 81346-10:2015 Industrial systems, installations and equipment and industrial products. Structuring principles and reference designation Power plants
CEI EN 60947-5-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
05/30138181 DC : DRAFT AUG 2005 IEC 60034-8 ED 3 - ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION
DEFSTAN 61-5(PT4)/2(1992) : 1992 ELECTRICAL POWER SUPPLY SYSTEMS BELOW 650 VOLTS - PART 4: POWER SUPPLIES IN HM SHIPS
09/30207606 DC : 0 BS EN 61148 - TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERTER EQUIPMENT
BS EN 61666:2010 Industrial systems, installations and equipment and industrial products. Identification of terminals within a system
CEI EN 60092-507 : 2016 ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
BS EN 60092-507:2015 Electrical installations in ships Small vessels
ES 203 408 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); COLOUR AND MARKING OF DC CABLE AND CONNECTING DEVICES
IEC 60092-376:2017 Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC TR 61439-0:2013 Low-voltage switchgear and controlgear assemblies - Part 0: Guidance to specifying assemblies
CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
ISO/TS 81346-10:2015 Industrial systems, installations and equipment and industrial products — Structuring principles and reference designation — Part 10: Power plants
I.S. EN 60694:1999 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
CEI EN 61095 : 2010 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
I.S. EN 50620:2017 ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEC 61082-1 REDLINE : 3ED 2014 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
BS EN 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) Dimensions, terminals and marking
BS EN 60204-11 : 2001 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
I.S. EN 61293:1995 MARKING OF ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS (IEC 1293:1994)
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
PD IEC/TR 61439-0:2013 Low-voltage switchgear and controlgear assemblies Guidance to specifying assemblies
BS EN 61082-3:1994 Preparation of documents used in eletrotechnology. Connection diagrams, tables and lists
UNE-EN 61140:2017 Protection against electric shock - Common aspects for installation and equipment
IEC 60439-1:1999+AMD1:2004 CSV Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
12/30268015 DC : 0 BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
BS EN 15380-1:2006 Railway applications. Designation system for railway vehicles General principles
EN 50091-1-1:1996/corrigendum Aug. 2004
EN 62019:1999/A12:2014 ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS AND SIMILAR EQUIPMENT FOR HOUSEHOLD USE - AUXILIARY CONTACT UNITS
EN 50502:2015 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
EN 61082-3:1994 Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
EN 61293:1994 Marking of electrical equipment with ratings related to electrical supply - Safety requirements
EN 60694:1996/A2:2001 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
EN 61175-1:2015 Industrial systems, installations and equipment and industrial products - Designation of signals - Part 1: Basic rules
EN 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
EN 60204-11:2000/corrigendum:2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 61056-1:2012 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
EN 60034-8:2007/A1:2014 ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION (IEC 60034-8:2007/A1:2014)
EN 60669-2-3:2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME DELAY SWITCHES (TDS)
DIN EN 15380-1:2006-06 Railway applications - Designation systematic for railway vehicles - Part 1: General
EN 62040-1-2:2003/corrigendum:2004
CEI EN 62135-1 : 2016 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
EN 300 132-1 : 2.0.1 DRAFT ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) EQUIPMENT; PART 1: OPERATED BY ALTERNATING CURRENT (AC) SOURCE
I.S. EN 61175-1:2015 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES
I.S. EN 61666:2010 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - IDENTIFICATION OF TERMINALS WITHIN A SYSTEM
BS EN 60669-2-3:2006 Switches for household and similar fixed electrical installations Particular requirements. Time delay switches (TDS)
CEI EN 61056-1 : 2014 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST
UNE-EN 60947-5-2:2008 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
DIN 6779-11:1998-08 STRUCTURING PRINCIPLES FOR TECHNICAL PRODUCTS AND TECHNICAL PRODUCT DOCUMENTATION - PART 11: SHIPS AND MARINE TECHNOLOGY
EN 50620:2017 Electric cables - Charging cables for electric vehicles
BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
CEI EN 62491 : 2009 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - LABELLING OF CABLES AND CORES
CEI EN 60669-2-3 : 2007 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME DELAY SWITCHES (TDS)
BS 638-9:1990 Arc welding power sources, equipment and accessories Specification for power sources for manual arc welding with limited duty
BS ISO 14990-2:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems Particular requirements for externally-powered machines
BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
CSA E61496.1 :2004 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
NF EN 60092 507 : 2015 ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
08/30179080 DC : DRAFT OCT 2008 BS EN 61666 - INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - IDENTIFICATION OF TERMINALS WITHIN A SYSTEM
CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
CEI EN 60669-2-2 : 2007 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS - ELECTROMAGNETIC REMOTECONTROL SWITCHES (RCS)
04/30111859 DC : 0 IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
CEI EN 61148 : 2012 TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERSION EQUIPMENT
BS EN 60034-1:2010 Rotating electrical machines Rating and performance
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CEI EN 60034-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
04/30087862 DC : DRAFT FEB 2004 IEC 61175 ED.2 - INDUSTRIAL SYSTEMS, INSTALLATION AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
I.S. EN 61056-2:2012 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 2: DIMENSIONS, TERMINALS AND MARKING (IEC 61056-2:2012 (EQV) + CORRIGENDUM OCT. 2012 (EQV))
NF EN 60669 2-3 : 2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME-DELAY SWITCHES (TDS)
I.S. EN 50156-1:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
BS EN 61496-1:2013 Safety of machinery. Electro-sensitive protective equipment General requirements and tests
DIN ISO/TS 81346-10;DIN SPEC 13300:2016-05 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATION - PART 10: POWER PLANTS (ISO/TS 81346-10:2015)
CSA C22.2 No. 1010.1 : 0 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS
DIN ISO/TS 16952-10:2010-01 TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 10: POWER PLANTS
I.S. EN 60947-5-2:2008 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007 (EQV))
I.S. EN 60034-8:2007 ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION
I.S. EN 61204-7:2006 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
I.S. EN 60204-32:2008 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
I.S. EN 62040-1-2:2004
IEC 60092-376 REDLINE : 3ED 2017 ELECTRICAL INSTALLATIONS IN SHIPS - PART 376: CABLES FOR CONTROL AND INSTRUMENTATION CIRCUITS 150/250 V (300 V)
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
IEC 60092-353:2016 Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
IEC 60204-33:2009 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
DIN EN 60617-11:1997-08 GRAPHICAL SYMBOLS FOR DIAGRAMS - PART 11: ARCHITECTURAL AND TOPOGRAPHICAL INSTALLATION PLANS AND DIAGRAMS
IEC 60092-376:2017 RLV Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 60669-2-2:2006 Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
UNE-EN 61056-1:2013 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
ISO 10472-1:1997 Safety requirements for industrial laundry machinery Part 1: Common requirements
UNE-EN 61056-2:2013 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
ISO 19859:2016 Gas turbine applications Requirements for power generation
06/30154990 DC : 0 BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
I.S. EN 61082-1:2015 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
DIN EN 61082-3:1995-05 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 3: CONNECTION DIAGRAMS, TABLES AND LISTS
I.S. EN ISO 10472-1:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
DIN EN 61175:2006-07 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENTS AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
BS 5486-1:1990 Low-voltage switchgear and controlgear assemblies Requirements for type-tested and partially type-tested assemblies
NEMA IEC 60974-1 : 2008 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
DIN VDE 0660-100 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
BS 3939-11:1985 Graphical symbols for electrical power, telecommunications and electronics diagrams Architectural and topographical installation plans and diagrams
I.S. EN 61056-1:2012 GENERAL PURPOSE LEAD-ACID BATTERIES (VALVE-REGULATED TYPES) - PART 1: GENERAL REQUIREMENTS, FUNCTIONAL CHARACTERISTICS - METHODS OF TEST (IEC 61056-1:2012 (EQV))
I.S. EN 62491:2008 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - LABELLING OF CABLES AND CORES
12/30218691 DC : 0 BS EN 61175 - INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
04/30095682 DC : DRAFT APR 2004 IEC 60974-1 ED.3 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
DEFSTAN 61-5(PT4)/2(1990) : DRAFT ELECTRICAL POWER SUPPLY SYSTEMS BELOW 650 VOLTS - PART 4: POWER SUPPLIES IN HM SHIPS
07/30160937 DC : 0 BS EN 62941 - INDUSTRIAL SYSTEMS, INSTALLATIONS, EQUIPMENT AND INDUSTRIAL PRODUCTS - LABELLING OF CONDUCTORS AND CABLES
CEI EN 61293 : 1997 MARKING ELECTRICAL EQUIPMENT WITH RATINGS RELATED TO ELECTRICAL SUPPLY - SAFETY REQUIREMENTS
UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
NF EN 60034-8 : 2008 AMD 1 2014 ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION
04/30115413 DC : DRAFT OCT 2004 ISO/IEC 81714-2 - DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS - PART 2: SPECIFICATION FOR GRAPHICAL SYMBOLS IN A COMPUTER SENSIBLE FORM INCLUDING GRAPHICAL SYMBOLS FOR A REFERENCE LIBRARY AND REQUIREMENTS FOR THEIR INTERCHANGE
I.S. EN 50091-1:1993 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - GENERAL AND SAFETY REQUIREMENTS
NF EN 60601-1 : 2007-01 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNE-IEC 60092-353:2017 Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
BS EN 60669-2.2 : 2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS - ELECTROMAGNETIC REMOTE-CONTROL SWITCHES (RCS)
CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
CSA E61496.1 : 2004 : R2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 60974-1:2012 Arc welding equipment Welding power sources
UNE-EN 60034-1:2011 Rotating electrical machines - Part 1: Rating and performance
08/30195564 DC : 0 BS EN 60974-1 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
BS 3939-2:1985 Graphical symbols for electrical power, telecommunications and electronics diagrams Symbol elements, qualifying symbols and other symbols having general application
CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN 60947-5-2 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
I.S. EN 60947-5-3:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 62271-1:2017 High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear
I.S. EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
BS EN 60034-8 : 2007 ROTATING ELECTRICAL MACHINES - PART 8: TERMINAL MARKINGS AND DIRECTION OF ROTATION
I.S. EN 50502:2015 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
I.S. EN 60092-507:2015 ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
BIS IS/IEC 62271-1 : 2007 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
ISO/TS 16952-10:2008 Technical product documentation Reference designation system Part 10: Power plants
PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
I.S. EN 60204-1:2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
NF EN 62491 : 2008 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - LABELLING OF CABLES AND CORES
I.S. EN 81714-2:2007 DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS - PART 2: SPECIFICATION FOR GRAPHICAL SYMBOLS IN A COMPUTER SENSIBLE FORM, INCLUDING GRAPHICAL SYMBOLS FOR A REFERENCE LIBRARY, AND REQUIREMENTS FOR THEIR INTERCHANGE
I.S. EN 61010-1:2010/A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60092-353 REDLINE : 4ED 2016 ELECTRICAL INSTALLATIONS IN SHIPS - PART 353: POWER CABLES FOR RATED VOLTAGES 1 KV AND 3 KV
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60092-507:2014 Electrical installations in ships - Part 507: Small vessels
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
I.S. EN 62019:2000 ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS AND SIMILAR EQUIPMENT FOR HOUSEHOLD USE - AUXILIARY CONTACT UNITS
DIN EN ISO 10472-1:2009-10 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
IEC 60034-8:2007+AMD1:2014 CSV Rotating electrical machines - Part 8: Terminal markings anddirection of rotation
IEC 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
IEC 62135-1:2015 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60092-353:2016 RLV Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
UNE-EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
UNI EN ISO 10472-1 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
CEI EN 61666 : 2011 INDUSTRIELLE SYSTEME, ANLAGEN UND AUSRUESTUNGEN UND INDUSTRIEPRODUKTE - IDENTIFIKATION VON ANSCHLUESSEN IN SYSTEMEN
DIN EN 61175-1:2016-05 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS - PART 1: BASIC RULES (IEC 61175-1:2015)
BIS IS/IEC 60034-1 : 2004 AMD 1 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
DD ISO/TS 16952-10:2008 Technical product documentation. Reference designation system Power plants
BS EN 50300:2004 Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards
CEI EN 60974-1 : 2013 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
I.S. EN 60204-11:2000 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
BS EN 61095:1993 Specification for electromechanical contactors for household and similar purposes
DIN ISO/TS 81346-10;DIN SPEC 13300:2016-05 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATION - PART 10: POWER PLANTS (ISO/TS 81346-10:2015)
BS EN 61175-1:2015 Industrial systems, installations and equipment and industrial products. Designation of signals Basic rules
BS EN 50620:2017 Electric cables. Charging cables for electric vehicles (BT(DE/NOT)259)
HD 60364-1:2008/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
17/30352734 DC : 0 BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
07/30168572 DC : 0 BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNE-EN 50502:2016 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
NF EN 60669 2-2 : 2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS - ELECTROMAGNETIC REMOTE-CONTROL SWITCHES (RCS)
BS 3939-3:1985 Graphical symbols for electrical power, telecommunications and electronics diagrams Conductors and connecting devices
I.S. EN 60669-2-2:2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS - ELECTROMAGNETIC REMOTE-CONTROL SWITCHES (RCS)
NF EN 61095 : 2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
IEC 60974-1:2017 Arc welding equipment - Part 1: Welding power sources
UNE-IEC 60092-376:2017 Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
CEI EN 81714-2 : 2007 DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS - PART 2: SPECIFICATION FOR GRAPHICAL SYMBOLS IN A COMPUTER SENSIBLE FORM, INCLUDING GRAPHICAL SYMBOLS FOR A REFERENCE LIBRARY, AND REQUIREMENTS FOR THEIR INTERCHANGE
I.S. EN 62135-1:2015 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
I.S. EN 60439-1:2000 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
DIN EN 60617-2:1997-08 GRAPHICAL SYMBOLS FOR DIAGRAMS - PART 2: SYMBOL ELEMENTS, QUALIFYING SYMBOLS AND OTHER SYMBOLS HAVING GENERAL APPLICATION
ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
PD IEC/TS 62548:2013 Photovoltaic (PV) arrays. Design requirements
IEC 61666:2010 Industrial systems, installations and equipment and industrial products - Identification of terminals within a system
IEC 61056-2:2012 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 61175 : 2015 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - DESIGNATION OF SIGNALS
IEC 81714-2:2006 Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
98/705686 DC : DRAFT MAR 1998 PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
ISO 8230:1997 Safety requirements for dry-cleaning machines using perchloroethylene
14/30238347 DC : 0 BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
08/30195018 DC : DRAFT DEC 2008 BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
IEC 61293:1994 Marking of electrical equipment with ratings related to electrical supply - Safety requirements
EN 60947-5-2:2007/A1:2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012)
BS EN 61140 : 2002 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
00/565497 DC : DRAFT DEC 2000 BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE
IEC 62491:2008 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
IEC 61056-1:2012 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
IEC 60669-2-3:2006 Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
IEC 60947-5-2:2007+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches
IEC 61082-3:1993 Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
09/30204029 DC : 0 BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
IEC 62040-1-2:2002 Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
BS EN 61082-1:2015 Preparation of documents used in electrotechnology Rules
EN 60092-507:2015/AC:2015 ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
IEC 61095:2009 Electromechanical contactors for household and similar purposes
IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
IEC 62019:1999+AMD1:2002 CSV Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
BS EN 60204-33:2011 Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment
BS EN 61204-7:2006 Live working. Conductive clothing Safety requirements
BS EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
BS IEC 62548:2016 Photovoltaic (PV) arrays. Design requirements
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
12/30260546 DC : 0 BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
07/30153021 DC : 0 BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN 15380-1:2006 Railway applications - Designation system for railway vehicles - Part 1: General principles
EN ISO 8230 : 1997 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
I.S. EN 60974-1:2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV))
DIN 40900-11:1988-03 GRAPHICAL SYMBOLS FOR DIAGRAMS; SYSTEMS & ELECTRICAL INSTALLATION
13/30292538 DC : 0 BS EN 60092-507 ED 3.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS
I.S. EN ISO 8230:1998 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
BS EN 62491:2008 Industrial systems, installations and equipment and industrial products. Labelling of cables and cores
15/30265353 DC : 0 BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
BS EN 61056-1:2012 General purpose lead-acid batteries (valve-regulated types) General requirements, functional characteristics. Methods of test
15/30319963 DC : 0 BS EN ISO 81346-12 - INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 12: CONSTRUCTION WORKS
BS EN 60694:1997 Common specifications for high-voltage switchgear and controlgear standards
IEC TS 62666:2016 Guidelines for the inclusion of documentation aspects in product standards
12/30257495 DC : 0 BS EN 61082-1 - PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
I.S. EN 60669-2-3:2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS - TIME DELAY SWITCHES (TDS)
BS EN 60947-1 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
DIN VDE 0543 : 1990 POWER SOURCES FOR MANUAL ARC WELDING WITH LIMITED DUTY
NF EN 50300 : 2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
08/30182672 DC : DRAFT MAY 2008 BS EN 60034-1 - ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CSA E61131.2 :2006 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
I.S. EN 60034-1:2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
03/311404 DC : 0 IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA E61131.2 : 2006 : R2016 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
STANAG 1008 : 2004 CHARACTERISTICS OF SHIPBOARD ELECTRICAL POWER SYSTEMS IN WARSHIPS OF THE NATO NAVIES
NF EN 61666 : 2011 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - IDENTIFICATION OF TERMINALS WITHIN A SYSTEM
ISO 14990-2:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 2: Particular requirements for externally-powered machines
S.R. HD 60364-1:2008 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
I.S. EN 61148:2012 TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERSION EQUIPMENT (IEC 61148:2011 (EQV))
NF EN 50060 : 1990 AMD 1 1995 POWER SOURCES FOR MANUAL ARC WELDING WITH LIMITED DUTY
I.S. EN 60947-1:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
EN 61666:2010 Industrial systems, installations and equipment and industrial products - Identification of terminals within a system
I.S. EN 61095:2009 ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 50091-1-1:2004 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1-1: GENERAL AND SAFETY REQUIREMENTS FOR UPS USED IN OPERATOR ACCESS AREAS
DIN 6779-10:2007-04 STRUCTURING PRINCIPLES FOR TECHNICAL PRODUCTS AND TECHNICAL PRODUCT DOCUMENTATION - PART 10: POWER PLANTS
UNE-EN 60974-1:2013 Arc welding equipment - Part 1: Welding power sources
NF EN 60947-1 : 2007 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
NF EN 60034-1 : 2011 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 60204-33:2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
I.S. EN 61496-1:2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 62271-1:2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
IEC 61148:2011 Terminal markings for valve device stacks and assemblies and for power conversion equipment
02/203840 DC : DRAFT MAY 2002 IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
BS EN 62135-1:2015 Resistance welding equipment Safety requirements for design, manufacture and installation
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 62040-1-2:2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
BS EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery Common requirements
IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
BS EN 60204-1 : 2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 60204-32:2008 Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
EN 61140:2016 Protection against electric shock - Common aspects for installation and equipment
DIN VDE 0660-500 : 1991 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
EN 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN 61175:2005 Industrial systems, installations and equipment and industrial products - Designation of signals
EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 60204-33:2011 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
EN 62135-1:2015/AC:2016-02 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
EN 81714-2:2007 Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
EN 60974-1:2012 Arc welding equipment - Part 1: Welding power sources
EN 61148:2012 Terminal markings for valve device stacks and assemblies and for power conversion equipment
EN 61082-1:2015 Preparation of documents used in electrotechnology - Part 1: Rules
EN 60669-2-2:2006 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS - ELECTROMAGNETIC REMOTE-CONTROL SWITCHES (RCS)
EN 62491:2008 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
EN 50300:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards
EN 61095:2009 Electromechanical contactors for household and similar purposes

IEC 62491:2008 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
AS/NZS IEC 60092.376:2020 Electrical installations in ships Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 60227-2:1997+AMD1:2003 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60757:1983 Code for designation of colours
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
AS/NZS IEC 60092.353:2020 Electrical installations in ships Power cables for rated voltages 1 kV and 3 kV
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
IEC 61666:2010 Industrial systems, installations and equipment and industrial products - Identification of terminals within a system

View more information
£177.95
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.