• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 3743-1:2010

Current
Current

The latest, up-to-date edition.

Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

21-09-2010

ISO 3743-1:2010 specifies methods for determining the sound power level or sound energy level of a noise source by comparing measured sound pressure levels emitted by this source (machinery or equipment) mounted in a hard-walled test room, the characteristics of which are specified, with those from a calibrated reference sound source. The sound power level (or, in the case of noise bursts or transient noise emission, the sound energy level) produced by the noise source, in frequency bands of width one octave, is calculated using those measurements. The sound power level or sound energy level with frequency A-weighting applied is calculated using the octave-band levels.

The method specified in ISO 3743-1:2010 is suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.

The noise source under test may be a device, machine, component or sub-assembly. The maximum size of the source depends upon the size of the room used for the acoustical measurements (see 4.2).

The test environment that is applicable for measurements made in accordance with ISO 3743-1:2010 is a hard-walled test room with prescribed acoustical characteristics.

Information is given on the uncertainty of the sound power levels and sound energy levels determined in accordance with ISO 3743-1:2010, for measurements made in frequency octave bands and for A-weighted frequency calculations performed on them. The uncertainty conforms to ISO 12001:1996, accuracy grade 2 (engineering grade).

DevelopmentNote
Supersedes ISO/DIS 3743-1. (09/2010) Also numbered as ANSI S12.53/1. (04/2011)
DocumentType
Standard
Pages
36
PublisherName
International Organization for Standardization
Status
Current
Supersedes

CEI EN 60349-4 : 2014 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
08/30193440 DC : 0 BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
I.S. EN 60335-2-75:2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
CSA C22.2 No. 80601-2-35 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
I.S. EN 12639:2000 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
BS EN 1870-19:2013 Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
09/30206358 DC : DRAFT SEP 2009 BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-18:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
01/202453 DC : DRAFT APRIL 2001 IEC 60034-9 ED.4 - ROTATING ELECTRICAL MACHINERY - PART 9: NOISE LIMITS
08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 60335-2-79:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS (IEC 60335-2-79:2012 (MOD))
DIN EN 12012-1:2015-05 (Draft) PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
AAMI ISO 80601-2-35 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
DIN EN 16564 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
12/30253910 DC : DRAFT JULY 2012 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
12/30257842 DC : 0 BS ISO 27327-2 - FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER
PREN 1870-3 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
10/30233212 DC : 0 BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
08/30182278 DC : 0 BS EN 1547:2001/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
DIN EN 16564:2015-04 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
12/30262897 DC : DRAFT JUNE 2012 BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS
11/30237569 DC : 0 BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
SMPTE EG 16 : 2014 MEASUREMENT METHODS FOR FILM AND DIGITAL MOTION-PICTURE CAMERA ACOUSTICAL NOISE - FIELD METHOD
BS EN 60335-2-67:2012 Household and similar electrical appliances. Safety Particular requirements for floor treatment machines for commercial use
BS 848-2.2(2004) : 2004 INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 2: REVERBERANT ROOM METHOD
16/30318928 DC : 0 BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES
09/30197984 DC : 0 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 60335-2-72:2012 Household and similar electrical appliances. Safety Particular requirements for floor treatment machines with or without traction drive, for commercial use
07/30151731 DC : 0 BS IEC 80601-2-35 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF BLANKETS, PADS AND MATTRESSES, INTENDED FOR HEATING IN MEDICAL USE
PREN ISO 11200 : DRAFT 2012 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
CAN/CSA-C22.2 NO. 60335-2-72:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
BS 848-2.1(2004) : 2004 INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
CEI EN 60335-2-67 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
UNI EN 12012-4 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 1807-1:2013-06 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
EEMUA 140 : 2014 NOISE PROCEDURE SPECIFICATION
I.S. EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
I.S. EN 12102:2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
I.S. EN ISO 18217:2015 SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
I.S. EN 1807-2:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 60335-2-69:2012 Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
PREN 1870-12 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN 16564:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN 15571:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN 60335-2-75 : 2004 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
I.S. EN 1829-1:2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
I.S. EN 60034-9:2005 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
BS EN 60704-2-13:2017 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for range hoods and other cooking fume extractors
UNE-EN 13141-11:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
ISO 19085-1:2017 Woodworking machines Safety Part 1: Common requirements
BS EN 1870-6:2017 Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood
BS EN ISO 19085-1:2017 Woodworking machines. Safety Common requirements
UNE-EN ISO 19085-1:2018 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
ANSI/ASA S12.53 PART 2 : 1999(R2015) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
UNI EN 12102 : 2014 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
ISO 8579-1:2002 Acceptance code for gear units — Part 1: Test code for airborne sound
DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
I.S. EN ISO 3743-2:2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
DIN EN ISO 9902-4 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 1870-7:2013-01 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 1870-12:2014-03 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
DIN EN 15036-1:2006-12 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
DIN EN 1870-16:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN ISO 9902-1 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 13141-6:2015-02 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN ISO 11200:2014-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
DIN EN 1870-9:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1870-3:2015-02 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
I.S. EN 861:2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN ISO 3741:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
UNE-EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
UNE-EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
ONORM EN 1218-1 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
BS EN ISO 11691:1997 Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method
UNE-EN 1870-7:2013 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 12984 : 2005 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 859 : 2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
BS EN 1870-16:2012 Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting
UNE-EN 60335-2-69:2013 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN 1870-15:2012 Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN 1870-9:2012 Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN ISO 11201:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN 14462:2015 Surface treatment equipment. Noise test code for surface treatment equipment including its ancillary handling equipment. Accuracy grades 2 and 3
BS EN 454:2014 Food processing machinery. Planetary mixers. Safety and hygiene requirements
BS EN ISO 11690-2:1997 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures
BS EN 1870-17 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS EN ISO 3743-2:1997 Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms
BS EN 1870-10:2013 Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 11691:2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 13141-6:2014 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
I.S. EN 1870-16:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
I.S. EN 454:2014 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 60704-2-11:1999 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances
EN 13141-11:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
NF EN ISO 11691 : 2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
EN 12639:2000/AC:2004 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
DIN EN ISO 9902-1:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
EN 13141-8:2014 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
EN 60704-1:2010/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010)
DIN EN ISO 11691:2010-01 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009
EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 12102:2013 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
EN 60034-9:2005/A1:2007 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements
EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN ISO 4871:2009-11 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 61096:1993/A1:1996 METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
EN 62121:2001 Methods of measurement for minidisc recorders/players
EN 62777:2016 Quality evaluation method for the sound field of directional loudspeaker array system
EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
ONORM EN 1829-1 : 2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 60335-2-79:2012 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
NBR IEC 60034-9 : 2011 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
ONORM EN 13141-8 : 2014 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
I.S. EN 12354-5:2009 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
ONORM EN 16583 : 2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
15/30302620 DC : 0 BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES
BS EN 60349-1:2010 Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors
12/30265270 DC : 0 BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
11/30237566 DC : 0 BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE-EN 1870-13:2008 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
BS EN ISO 20361:2015 Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
03/308040 DC : DRAFT MAY 2003 IEC 60704-2-2 ED. 2.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-2: PARTICULAR REQUIREMENTS FOR FAN HEATERS
UNI EN 1870-19 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
04/30122794 DC : DRAFT SEP 2004 EN 15036-1 - HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS AT PLACE OF INSTALLATION
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
BS EN 60349-4:2013 Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter
14/30302844 DC : 0 BS EN 60335-2-72 ED 3.0/AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE
04/30106849 DC : DRAFT MAY 2004 EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
13/30267124 DC : 0 BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS
DIN EN ISO 11201:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
09/30198762 DC : 0 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS ISO 27327-2:2014 Fans. Air curtain units Laboratory methods of testing for sound power
DIN EN 13141-11 E : 2015 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
11/30237557 DC : 0 BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
16/30341470 DC : 0 BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
12/30232434 DC : 0 BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 16583 E : 2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
DIN EN 1807-2:2013-06 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
BS EN 60335-2-79:2012 Household and similar electrical appliances. Safety Particular requirements for high pressure cleaners and steam cleaners
UNE-EN 691-1:2013 Safety of woodworking machines - Part 1: Common requirements
12/30271386 DC : 0 BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
PREN 1870-11 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
16/30335973 DC : 0 BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
UNI EN ISO 10821 : 2010 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
DIN EN 16583:2015-10 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
UNI ISO 13347-1 : 2009 INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
11/30244804 DC : 0 BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS ISO 15665:2003 Acoustics. Acoustic insulation for pipes, valves and flanges
DIN EN 1829-1:2010-05 High pressure water jet machines - Safety requirements - Part 1: Machines
07/30094858 DC : 0 BS ISO 3747 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
DIN EN ISO 20361:2016-05 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
PREN 13053 : DRAFT 2017 VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
PREN 14462 : DRAFT 2012 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
07/30161919 DC : 0 EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS EN 15572:2015 Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines
04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
AAMI IEC 60601-2-50 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
CEI EN 60335-2-69 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
I.S. EN 60349-4:2013 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV))
DIN EN ISO 18217 E : 2015 SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
NF EN 60034-9 : 2005 AMD 1 2007 ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
PREN 1870-6 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1807-1:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
I.S. EN 62777:2016 QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM
BS ISO 13347-1 : 2004 INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
BS EN 60268-5 : 2003 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
PREN 12102-2 : DRAFT 2016 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
ISO 13347-2:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method
ISO 3743-2:2018 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
CSA C22.2 No. 80601-2-35 : 2012(R2016) MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
CEI EN 60349-1 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
PREN 13141-6 : DRAFT 2012 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
EN 12042 : 2014 COR 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 60268-5:2003 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
I.S. EN 16583:2015 HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
ANSI/ASA S12.54/ISO 3744 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
I.S. EN 691-1:2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 12042:2014-07 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12042 : 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
CSA C22.2 No. 80601-2-35 : 2012 : INC : COR 1 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
EN ISO 3740:2000 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
UNI EN 13141-7 : 2011 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
BS EN ISO 3740:2001 Acoustics. Determination of sound power levels of noise sources. Guidelines for the use of basic standards
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
NF EN ISO 3743-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
IEC 60704-2-13:2016 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other cooking fume extractors
I.S. EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
ONORM EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
DIN EN 1807:2010-02 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13114:2010-03 Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 1870-14:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1674:2015-12 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12984:2011-02 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13112:2011-03 Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN 12301:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 12354-5:2009-10 Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment
DIN EN 1870-10:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 1870-13:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 1265:2009-07 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 1870-8:2013-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 1218-1:2010-02 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
DIN EN 13141-8:2014-09 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
DIN EN 14462 E : 2015 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN 1870-2:1999 Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
ISO 5136:2003 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 1870-7:2012 Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 940 : 2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNE-EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
UNE-EN 60335-2-72:2013 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
BS EN ISO 11546-1:1996 Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes)
ISO 11689:1996 Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment
BS EN ISO 3744:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
I.S. EN 1870-11:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 1870-8:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 13114:2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN ISO 12001:2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
I.S. EN 1870-10:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
I.S. EN ISO 3747:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
I.S. EN ISO 5136:2009 ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
I.S. EN 13113:2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-1:1999-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN ISO 6926:2016 ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
UNI EN ISO 11691 : 2009 ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN 1870-12:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN ISO 3745:2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012)
DIN EN 1218-3:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN ISO 11204:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
ONORM EN 12042 : JUN 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
ONORM EN 16564 : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN 1870-9:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN ISO 11200:1996-07 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN 1870-3:2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
I.S. EN 13141-8:2014 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
I.S. EN 13141-7:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
EN 16564:2014 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 1265:2000 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 13141-7:2011-01 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
DIN EN 12639:2000-06 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND 3 OF ACCURACY
I.S. EN ISO 9902-4:2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001)
I.S. EN ISO 3741:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1870-17:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
ONORM EN 15571 : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN 453:2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 11690-1 : 1996 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES
DIN EN 1807:1999-10 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
I.S. EN 1870-15:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN ISO 1680:2013 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
I.S. EN 1218-3:2002 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
I.S. EN 1870-14:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
I.S. EN ISO 11546-1:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN ISO 3744:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
I.S. EN ISO 11546-2:2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
I.S. EN 12545:2000 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
I.S. EN 12984:2006 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1674:2015 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
EN 15571:2014 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
I.S. EN 1218-1:2000 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
I.S. EN 940:2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN ISO 10821:2013-02 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
EN ISO 9902-6:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001/AMD 2:2014)
ONORM EN 1673 : OCT 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 9614-3:2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
I.S. EN 1870-7:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 13112:2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 14462:2015 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
I.S. EN ISO 11202:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 11201:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 3746:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
I.S. EN 1870-5:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
I.S. EN ISO 4871:2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
I.S. EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN ISO 9902-6:2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001)
UNI EN ISO 11689 : 1998 ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
UNI EN 453 : 2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
CEI EN 60704-2-13 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
EN 13141-7:2010 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
UNI EN ISO 3382-3 : 2012 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES
UNI EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
BS ISO 15664:2001 Acoustics. Noise control design procedures for open plant
13/30289577 DC : 0 IEC 62777 - QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM
09/30182105 DC : 0 BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
DIN EN ISO 18217:2015-12 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
I.S. EN 848-1:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
BS ISO 8579-1:2002 Acceptance code for gear units Test code for airborne sound
10/30232428 DC : DRAFT DEC 2010 BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
BS EN 1870-18:2013 Safety of woodworking machines. Circular sawing machines Dimension saws
EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
ANSI S12.53/2 : 1999 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
DIN EN 1870-19 E : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
11/30251965 DC : 0 BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
12/30253907 DC : DRAFT JULY 2012 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 15571:2015-03 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
10/30216264 DC : 0 BS EN 60335-2-79 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
BS EN 1807-2:2013 Safety of woodworking machines. Band sawing machines Log sawing machines
16/30345760 DC : 0 BS EN 12102-2 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
UNE-EN ISO 20361:2015 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
10/30232425 DC : DRAFT DEC 2010 BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
10/30232422 DC : DRAFT DEC 2010 BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
10/30232431 DC : DRAFT DEC 2010 BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
14/30298371 DC : 0 BS EN 60335-2-68 ED 4.0 /A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES; FOR COMMERCIAL USE
BS PD ISO/TR 22100-1 : 2015 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
14/30297793 DC : 0 BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
DIN EN 1870-18:2013-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
04/30126355 DC : DRAFT DEC 2004 ISO 20361 - LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
BS EN 60601-2-21 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-21: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT RADIANT WARMERS (IEC 60601-2-21:2009)
04/30110326 DC : DRAFT APR 2004 EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
BS EN 1807-1:2013 Safety of woodworking machines. Band sawing machines Table band saws and band re-saws
DIN EN 16430-1:2015-03 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
11/30237563 DC : 0 BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 60704-2-11:1999 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. Particular requirements Electrically operated food preparation appliances
UNE-EN 16564:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
ISO 27327-2:2014 Fans Air curtain units Part 2: Laboratory methods of testing for sound power
05/30133333 DC : DRAFT MAY 2005 EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS ISO 13347-2:2004 Industrial fans. Determination of fan sound power levels under standardized laboratory conditions Reverberant room method
18/30369856 DC : 0 BS EN ISO 20361 - LIQUID PUMPS AND PUMPS UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
UNE-EN 16430-1:2015 Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements
BS EN 60704-1 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS
UNE-EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN 13141-11:2015-07 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
DD IEC/PAS 60704-2-15:2008 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for household food waste disposers
CEI EN 60349-2 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
UNE-EN 1870-6:2003 Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
IEC 60335-2-69:2016 RLV Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
S.R. CEN ISO/TR 22100-1:2017 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
UNI EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 15572:2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
ANSI S12.57 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
ISO 13261-1:1998 Sound power rating of air-conditioning and air-source heat pump equipment Part 1: Non-ducted outdoor equipment
UNE-EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
PREN 1870-10 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 1870-14:2008 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
UNE-EN 16583:2016 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
PREN 12102 : DRAFT 2012 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
PREN 60335-2-72 : DRAFT 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
EN ISO 19085-1:2017/AC:2018 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
UNI EN 12012-1 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
I.S. EN 12301:2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 60335-2-68:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012 (MOD))
IEC 60335-2-69:2016 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
IEC 60704-2-3:2017 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers
DIN EN 1870-11:2014-02 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
DIN EN 1870-17:2015-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1870-15:2013-01 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
DIN EN 12545:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements (includes Amendment A1:2009)
DIN EN ISO 6926:2016-08 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
DIN EN 13113:2011-05 Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN ISO 1680:2014-04 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
DIN EN 848-1:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 454:2015-02 Food processing machinery - Planetary mixers - Safety and hygiene requirements
DIN EN 848-2:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
DIN EN ISO 3747:2011-03 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
UNI EN ISO 11202 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
DIN EN ISO 3741:2011-01 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
DIN EN 14462:2015-08 SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
ISO 11546-1:1995 Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes)
BS EN 848-1 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNE-EN 60349-2:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors
ISO 6926:2016 Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
UNE-EN ISO 11203:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
BS EN 861 : 2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
UNE-EN ISO 5136:2010 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
UNE-EN 60335-2-67:2013 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use
UNE-EN 1870-8:2013 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
BS EN 848-2 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
IEC 60704-2-11:1998 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically-operated food preparation
ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
UNE-EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
UNE-EN 60704-2-13:2017 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other cooking fume extractors
UNE-EN 848-1:2008 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
UNE-EN 848-3:2013 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
UL 60335-2-67:1ED 2017-12 Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use
UL 60335-2-72:1ED 2017-09 Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use
I.S. EN 848-2:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNI EN ISO 11203 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
ONORM EN ISO 11200 : 2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN ISO 11203:2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
UNI EN ISO 3743-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
UNI EN 1265 : 2009 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
UNI EN ISO 3744 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
UNI EN 1870-8 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
UNI EN 1870-13 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNI EN 13113 : 2010 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNI EN ISO 11204 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
UNI EN 12545 : 2009 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
UNI EN ISO 9614-3 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
UNI EN 1870-15 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
UNI EN 848-3 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNI EN ISO 12001 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
UNI EN 1870-16 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
UNI EN 860 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES
UNI EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN ISO 11201 : 2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
UNI EN 859 : 2012 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNI EN 13112 : 2010 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
UNI EN 1218-4 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNI EN ISO 3746 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
UNI EN 848-1 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNI EN ISO 5136 : 2009 ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
UNI EN 1870-4 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
UNI EN ISO 9902-1 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
EN 1870-11:2013 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
UNI EN 1870-9 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 1870-12 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
UNI EN 12984 : 2010 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 3747 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
UNI EN 1870-14 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
UNI EN 1870-10 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 1870-11 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
UNI EN 454 : 2015 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 9902-4 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
UNI EN 1870-1 : 2009 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNI EN ISO 3741 : 2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
UNI EN 848-2 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNI EN 861 : 2012 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 1807 : 2010 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN ISO 11546-1 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
UNI EN 940 : 2012 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNI EN 1218-3 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
UNI EN ISO 11546-2 : 2009 ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
UNI EN 1870-5 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 12354-5 : 2009 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
UNI EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
UNI EN ISO 1680 : 2014 ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES
UNI EN 13141-8 : 2014 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
UNI EN 13114 : 2010 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
DIN EN 15572 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
14/30275192 DC : 0 BS EN ISO 6926 - ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
BS EN 16564:2014 Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
14/30293313 DC : 0 BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES
DIN EN ISO 3382-3:2012-05 Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012)
ONORM EN ISO 9902-6 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN ISO 11202:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
18/30369931 DC : 0 BS EN ISO 9902-6 - TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
PREN 13487 : DRAFT 2017 HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
BS EN 13141-11:2015 Ventilation for buildings. Performance testing of components/products for residential ventilation Supply ventilation units
98/715898 DC : DRAFT OCT 1998 ISO/CD 8579-1 - ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
17/30309708 DC : 0 BS EN ISO 3740 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN 1870-19:2014-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
12/30240135 DC : 0 BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
BS EN ISO 3382-3:2012 Acoustics. Measurement of room acoustic parameters Open plan offices
DIN EN ISO 3744:2011-02 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
08/30195355 DC : 0 BS EN 60335-2-79 FPRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
I.S. EN 848-3:2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
11/30237560 DC : 0 BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
PREN 848-3 : DRAFT 2010 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
CSA C22.2 No. 60601.2.50 : 2010 : INC : COR 1 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
DIN EN 15572:2015-12 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
12/30263881 DC : 0 BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
10/30216251 DC : 0 BS EN 60335-2-68 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES FOR COMMERCIAL USE
13/30267113 DC : 0 BS EN 13141-6 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
BS EN 62777:2016 Quality evaluation method for the sound field of directional loudspeaker array system
15/30300474 DC : DRAFT FEB 2015 BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS
10/30216260 DC : 0 BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
11/30231784 DC : 0 BS EN 1870-13:2007+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
BS ISO 3743-2 : 1994 AMD 9426 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - METHODS FOR SPECIAL REVERBERATION TEST ROOMS
IEC 60335-2-79:2016 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
07/30164508 DC : 0 IEC 60601-2-21 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-21: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT RADIANT WARMERS
UNI EN 1829-1 : 2010 HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
DIN EN 16430-1 E : 2015 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
DIN EN 15571 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
10/30216256 DC : 0 BS EN 60335-2-69 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
14/30293310 DC : 0 BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
17/30356590 DC : DRAFT AUG 2017 BS ISO 10494 - TURBINES AND TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD
CSA Z107.58 : 2015 NOISE EMISSION DECLARATIONS FOR MACHINERY
DIN ISO 15665:2011-02 Acoustics - Acoustic insulation for pipes,valves and flanges (ISO 15665:2003 + Cor. 1:2004)
BS EN 60704-2-2:2010 Household and similar appliances. Test code for the determination of airborne acoustical noise Particular requirements for fan heaters
BS EN 62121:2001 Methods of measurement for minidisc recorders/players
12/30261708 DC BS EN 60335-2-99 AMD1. Household and similar electrical appliances. Safety. Part 2-99. Particular requirements for commercial electric hoods
05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
ANSI S12-5:2006 ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
CSA C22.2 No. 60335-2-67 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE
04/30117319 DC : 0 BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
UNI EN 1870-18 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE-EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
ANSI S12-5 : 2006 : R2011 ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
BS EN 16583:2015 Heat exchangers. Hydronic room fan coils units. Determination of the sound power level
ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
ANSI S12.50 : 2002 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN ISO 11204:2010-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
I.S. EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
I.S. EN ISO 3382-3:2012 ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012)
I.S. EN 60349-1:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
I.S. EN 16430-1:2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
17/30339487 DC : 0 BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
PD CEN ISO/TR 22100-1:2017 Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards
17/30361327 DC : 0 BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
BS EN 60704-2-3:2002 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for dishwashers
CEI EN 60335-2-72 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE
PREN 12042 : DRAFT 2011 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 13347-1:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview
ISO 10843:1997 Acoustics — Methods for the description and physical measurement of single impulses or series of impulses
EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
IEC 60335-2-72:2016 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
BS EN 12301 : 2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
IEC 60335-2-67:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
ISO 15665:2003 Acoustics — Acoustic insulation for pipes, valves and flanges
EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
I.S. EN ISO 11200:2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
ONORM EN 12301 : 2009 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN ISO 9902-6 E : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 940:2012-05 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN 861:2012-09 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN 859:2012-09 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN ISO 11689:1997-03 ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT
DIN EN 1870-1:2009-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 848-3:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 860:2012-09 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN ISO 1680:2013 Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines
UNE-EN ISO 3747:2010 Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000)
DIN EN 12301:2010-02 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN ISO 11689 : 1997 ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
BS EN 15036-1:2006 Heating boilers. Test regulations for airborne noise emissions from heat generators Airborne noise emissions from heat generators
BS EN 12639:2000 Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
BS EN ISO 10821 : 2005 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
BS EN 1870-12:2013 Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines
BS EN 453:2014 Food processing machinery. Dough mixers. Safety and hygiene requirements
UNE-EN 60335-2-79:2013 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
BS EN ISO 5136:2009 Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method
ISO 10821:2005 Industrial sewing machines Safety requirements for sewing machines, units and systems
BS EN ISO 11821:1997 Acoustics. Measurement of the in situ sound attenuation of a removable screen
BS EN 1218-3 : 2001 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
ISO 9614-3:2002 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
DIN EN ISO 9902-6:2014-10 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001 + Amd 1:2009 + Amd 2:2014)
BS EN ISO 6926:2016 Acoustics. Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
ISO 11691:1995 Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
BS EN 1674:2015 Food processing machinery. Dough sheeters. Safety and hygiene requirements
ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ONORM EN ISO 20361 : 2015 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN ISO 11690-1:1997 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies
BS EN 13112 : 2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN ISO 11546-2:2009 Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes)
BS EN ISO 11203:2009 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
UNI EN ISO 11200 : 2014 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements
ISO 11200:2014 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
DIN EN ISO 9902-4:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
UNE-EN ISO 3743-2:2010 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
BS EN 1746:1999 Safety of machinery. Guidance for the drafting of the noise clauses of safety standards
UNE-EN 1870-15:2013 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
UNE-EN 13114:2002 Tannery machines- Rotating process vessels - Safety requirements.
BS EN 1807 : 1999 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
BS EN ISO 9902-1 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
ISO 1680:2013 Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines
BS EN 1870-3:2014 Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
UNE-EN 454:2015 Food processing machinery - Planetary mixers - Safety and hygiene requirements
ISO 20361:2015 Liquid pumps and pump units Noise test code Grades 2 and 3 of accuracy
IEC 60268-5:2003+AMD1:2007 CSV Sound system equipment - Part 5: Loudspeakers
BS EN 1265 : 1999 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery
BS EN ISO 9902-6 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
UNE-EN ISO 3744:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
IEC 60704-1:2010 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1: General requirements
UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
BS EN 12545 : 2000 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
UNE-EN ISO 9614-3:2010 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
UNE-EN ISO 12001:2010 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
BS EN 1870-11:2013 Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
UNE-EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
UNI EN 12301 : 2008 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
ISO 3382-3:2012 Acoustics Measurement of room acoustic parameters Part 3: Open plan offices
ISO 18217:2015 Safety of woodworking machines Edge-banding machines fed by chain(s)
UNE-EN 860:2007 Safety of woodworking machines - One side thickness planing machines
BS EN ISO 3746:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
BS EN 1870-13 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
IEC 62121:2001 Methods of measurement for minidisc recorders/players
UNE-EN 13112:2002 Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
IEC 60034-9:2003+AMD1:2007 CSV Rotating electrical machines - Part 9: Noise limits
ISO 9902-6:2001 Textile machinery Noise test code Part 6: Fabric manufacturing machinery
BS EN 13114 : 2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNE-EN 13141-6:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
UNE-EN ISO 3746:2010 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)
BS EN ISO 3747:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
UNE-EN 1870-9:2013 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
IEC 60349-4:2012 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
BS EN ISO 11204:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
BS EN ISO 11200:2014 Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
BS EN 13113 : 2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNE-EN 1870-16:2013 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
IEC 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
ISO 11546-2:1995 Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes)
UNE-EN 60349-1:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors
UNE-EN 940:2010 Safety of woodworking machines - Combined woodworking machines
BS EN ISO 4871:2009 Acoustics. Declaration and verification of noise emission values of machinery and equipment
BS EN ISO 12001:2009 Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code
UNE-EN ISO 3741:2011 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
IEC 62777:2016 Quality evaluation method for the sound field of directional loudspeaker array system
UNE-EN 859:2008 Safety of woodworking machines - Hand fed surface planing machines
BS EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 13141-8:2014 Ventilation for buildings. Performance testing of components/products for residential ventilation Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
UNE-EN 60335-2-68:2013 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
BS EN 860 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
UNE-EN 13113:2002 Tannery machines - Roller coating machines - Safety requirements.
UNE-EN ISO 4871:2010 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
DIN EN ISO 9902-1:2014-10 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
EN 691-1:2012 Safety of woodworking machines - Part 1: Common requirements
ONORM EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR-SIDED MOULDING MACHINES
EN 16430-1 : 2014 FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
EN ISO 11821 : 1997 ACOUSTICS - MEASUREMENT OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
EN ISO 3745:2012/A1:2017 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012/AMD 1:2017)
EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements
EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
EN ISO 12001:2009 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
ONORM EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements
EN ISO 11689:1996/AC:2009 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007)
EN 1870-13:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
EN ISO 10821:2005/A1:2009 Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01)
EN 1807:1999+A1:2009 Safety of woodworking machines - Band sawing machines
EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 9902-1:2001/A2:2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001/AMD 2:2014)
EN 1870-2:1999/AC:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)
EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
EN 1870-14:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
EN 1870-1:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN ISO 1680:2013 Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)
EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN 940:2009+A1:2012 Safety of woodworking machines - Combined woodworking machines
EN 16583:2015 Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 859:2007+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
EN 14462:2015 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
EN 848-2 : 2007 COR 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 861:2007+A2:2012 Safety of woodworking machines - Surface planing and thicknessing machines
EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 15572:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 15036-1:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
EN ISO 9902-4:2001/A2:2014 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)
EN 1870-9:2012 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
I.S. EN 12012-4:2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
BS EN 15571:2014 Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines
10/30094845 DC : 0 BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS
BS EN 691-1:2012 Safety of woodworking machines Common requirements
CSA C22.2 No. 60601.2.50 : 2010 : R2018 MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
BS EN 16430-1:2014 Fan assisted radiators, convectors and trench convectors Technical specifications and requirements
DIN EN 691-1:2013-01 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
11/30232437 DC : 0 BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
12/30255711 DC : 0 BS EN 16430-1 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
12/30272422 DC : 0 BS EN 14462 - SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN 12102:2013 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level
I.S. EN 1870-1:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
16/30318924 DC : 0 BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES')
I.S. EN 1870-13:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
BS EN 1829-1:2010 High pressure water jet machines. Safety requirements Machines
BS ISO 9611:1996 Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted
BS EN ISO 18217:2015 Safety of woodworking machines. Edge-banding machines fed by chain(s)
03/308041 DC : DRAFT MAY 2003 IEC 60704-2-5 ED. 2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-5: PARTICULAR REQUIREMENTS FOR ELECTRIC THERMAL STORAGE ROOM HEATERS
12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
14/30276846 DC : 0 BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S)
I.S. EN 12042:2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11203:2010-01 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
UNI EN ISO 9902-6 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
BS EN 60335-2-68:2012 Household and similar electrical appliances. Safety Particular requirements for spray extraction machines, for commercial use
BS EN 60349-2:2010 Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors
13/30279964 DC : 0 BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
UNE-EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
UNE-EN 15571:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
I.S. EN 60704-1:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010 (EQV))
16/30331355 DC : 0 BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES
DIN EN ISO 3745:2012-07 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017)
11/30206274 DC : 0 BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
11/30247562 DC : 0 BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 60335-2-69:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE (IEC 60335-2-69:2012 (MOD))
BS 848-2.5(2003) : 2003 ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
10/30216247 DC : 0 BS EN 60335-2-67 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
NF EN 80601-2-35 : 2010 AMD 1 2017 MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS AND MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
09/30178334 DC : DRAFT FEB 2009 BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
BS EN 12012-1 : 2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
IEC 60335-2-69 REDLINE : 5.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
UNE-EN ISO 18217:2016 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
BS EN 60034-9:2005 Rotating electrical machines Noise limits
09/30178331 DC : DRAFT FEB 2009 BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
08/30195341 DC : 0 BS EN 60335-2-67 FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT AND FLOOR CLEANING MACHINES, FOR INDUSTRIAL AND COMMERCIAL USE
02/705139 DC : DRAFT APR 2002 PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
08/30175655 DC : DRAFT APR 2008 BS EN 1265 AMD 1 - SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
09/30182101 DC : 0 BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
DIN EN ISO 3746:2011-03 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
I.S. EN 60335-2-67:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE (IEC 60335-2-67:2012 (MOD))
I.S. EN 13141-11:2015 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
ISO/TR 22100-1:2015 Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards
I.S. EN 60335-2-72:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE (IEC 60335-2-72:2012 (MOD))
I.S. EN 60704-2-13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
CEI EN 60335-2-68 : 2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES FOR COMMERCIAL USE
PREN 453 : DRAFT 2011 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 19085-1:2017 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
I.S. EN 1870-19:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
ANSI S12.51:2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ANSI S12.53/2 : 1999 : R2009 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ANSI S12.54:2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ANSI/ASA S12.57 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
ANSI S12.50 : 2002 : R2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ANSI S12.55 : 2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
ANSI/ASA S12.50/ISO 3740 : 2002(R2017) Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards
ANSI S12.50 : 2002 : R2007 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ANSI S12.51 : 2012 : R2017 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ANSI/ASA S12.56/ISO 3746 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
ANSI S12.56 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
IEC PAS 60704-2-15:2008 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-15: Particular requirements for household food waste disposers
CSA C22.2 No. 60601.2.50 : 2010FR MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements
I.S. EN 61096:1993 METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
DIN EN 1870-4:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN ISO 20361:2015 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO/FDIS 20361:2015)
I.S. EN 12012-1:2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
UNE-EN 60601-2-21:2010 Medical electrical equipment -- Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
UNE-EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997)
DIN EN 1218-2:2009-10 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
DIN EN 12012-4:2010-01 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 1870-5:2013-01 Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012)
DIN EN ISO 3743-2:2009-11 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
ONORM EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
DIN EN 1218-5:2010-02 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
DIN EN 453:2015-04 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13141-8:2015 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
UNE-EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
BS EN 12012-2 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
BS EN ISO 11202:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11690-1:1996 Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies
BS EN 12012-4 : 2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
BS EN 1870-8:2012 Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN 1218-1 : 1999 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
UNE-EN 13141-7:2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
BS EN 848-3:2012 Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines
BS EN ISO 3745 : 2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
I.S. EN 859:2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
BS EN ISO 9614-3:2009 Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning
BS EN 13141-7:2010 Ventilation for buildings. Performance testing of components/products for residential ventilation Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
I.S. EN 860:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN ISO 9902-4 : 2001 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN 13141-6:2014 Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust ventilation system packages used in a single dwelling
BS EN 1870-14 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
BS EN 1870-1 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 12102:2013-10 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
UNI EN 1218-1 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
DIN EN ISO 9902-6:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN ISO 3745:2017-10 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017)
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 13141-6:2014 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling
UNI EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
EN ISO 3382-3:2012 Acoustics - Measurement of room acoustic parameters - Part 3: Open plan offices (ISO 3382-3:2012)
DIN EN ISO 12001:2010-01 Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
EN 60268-5:2003/A1:2009 SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
EN 60704-2-13:2017 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods and other cooking fume extractors
DIN EN ISO 9902-4:2001-07 TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
EN 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
EN 60335-2-72:2012 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
DIN EN ISO 5136:2009-11 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)
ONORM EN 13141-7 : 2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
DIN EN ISO 11546-2:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
DIN EN ISO 11546-1:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)
EN 60704-2-3:2002/A1:2005 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS
EN 60335-2-68:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012, MODIFIED)
NF EN ISO 11203 : 2009 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
EN 60335-2-69:2012 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
DIN EN 12012-1:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
EN 60335-2-67:2012 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use
EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
EN 60335-2-75:2004/A12:2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
EN 60704-2-2:2010 Household and similar appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters
UNE-EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
UNE-EN 1870-17:2013 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
UNE-EN 848-2:2007+A1:2010 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
UNE-EN 848-2:2007 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
UNE-EN 1673:2001 Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements.
UNE-EN ISO 11204:2010 V2 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
UNE-EN ISO 11202:2010 V2 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
UNE-EN 1870-5:2003 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines.
UNE-EN 859:2008+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
OVE/ONORM EN 60335-2-75 : 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES

ISO 7574-2:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 2: Methods for stated values for individual machines
AS 5339:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 12001:1996 Acoustics Noise emitted by machinery and equipment Rules for the drafting and presentation of a noise test code
AS 5337:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
AS 5102.1:2019 Performance of household electrical appliances - Swimming pool pump-units Measurement of energy consumption and performance
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 3743-2:1994 Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms
ISO 7574-4:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
ISO/TR 25417:2007 Acoustics Definitions of basic quantities and terms
ISO 9614-1:1993 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points
IEC 60942:2003 Electroacoustics - Sound calibrators
ISO 9296:2017 Acoustics — Declared noise emission values of information technology and telecommunications equipment
AS 5336:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms
ISO 3747:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
AS 5335:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3740:2000 Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
ISO 9613-1:1993 Acoustics Attenuation of sound during propagation outdoors Part 1: Calculation of the absorption of sound by the atmosphere
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
ISO 7574-1:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
ISO 80000-8:2007 Quantities and units Part 8: Acoustics
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
ISO 6926:2016 Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
ISO 9614-3:2002 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning
ISO 7574-3:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 3: Simple (transition) method for stated values for batches of machines
ISO 3741:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms
ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms
AS 5333.2:2019 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms
IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
AS 5332:2019 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
£159.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.