• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO/IEC Guide 98-3:2008

Current

Current

The latest, up-to-date edition.

Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

30-09-2008

ISO/IEC Guide 98-3:2008 is a reissue of the 1995 version of the Guide to the Expression of Uncertainty in Measurement (GUM), with minor corrections. This Guide establishes general rules for evaluating and expressing uncertainty in measurement that can be followed at various levels of accuracy and in many fields — from the shop floor to fundamental research. The principles of this Guide are intended to be applicable to a broad spectrum of measurements, including those required for:

  • maintaining quality control and quality assurance in production;
  • complying with and enforcing laws and regulations;
  • conducting basic research, and applied research and development, in science and engineering;
  • calibrating standards and instruments and performing tests throughout a national measurement system in order to achieve traceability to national standards;
  • developing, maintaining, and comparing international and national physical reference standards, including reference materials.

Committee
ISO/TMBG
DevelopmentNote
Supersedes ISO/IEC GUIDE 98. (09/2008) Supplement 1 is available separately, see ISO/IEC GUIDE 98-3 SUPP 1. (12/2008) Supplement 2 is available separately, see ISO/IEC GUIDE 98-3 SUPP 2. (11/2011) Supersedes RM.AERO 80312 & RM.AERO 80313. (05/2015)
DocumentType
Guide
Pages
121
ProductNote
THIS STANDARDS ALSO HAVE CORRECTED VERSION IN ENGLISH 2010. New child SUPP 2 2011 is now added.
PublisherName
International Organization for Standardization
Status
Current
SupersededBy
Supersedes

DIN ISO 21360-1 E : 2016 VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012)
15/30293072 DC : 0 BS EN ISO 6789-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHOD FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND CALIBRATION PROCEDURE
DIN EN ISO 80000-1 E : 2013 QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011)
I.S. EN ISO 6142-1:2015 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015)
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
PREN ISO 6416 : DRAFT 2015 HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO/DIS 6416:2015)
BS ISO 20785-2 : 2011 DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE
BS ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
DIN EN ISO 22007-6 E : 2015 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
CEI EN 62586-2 : 2015 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
ISO/TS 17503:2015 Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
DIN ISO 9277:2014-01 DETERMINATION OF THE SPECIFIC SURFACE AREA OF SOLIDS BY GAS ADSORPTION - BET METHOD (ISO 9277:2010)
FD ISO GUIDE 34 : 2010 FD GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
DIN EN 15980:2011-08 Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene
DIN ISO 24173 E : 2013 MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION (ISO 24713:2009)
DIN ISO 21360-1:2016-09 VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012)
PD CEN/TR 16338:2012 Foodstuffs. Detection of food allergens. Template for supplying information about immunological methods and molecular biological methods
DIN EN ISO 6506-2:2016-04 (Draft) METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014)
BS EN 61788-6:2011 Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
13/30294309 DC : 0 BS ISO/CIE 19476 - CHARACTERIZATION OF THE PERFORMANCE OF ILLUMINANCE METERS AND LUMINANCE METERS
CEI EN 62209-2 : 2013 HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
PD IEC/TS 62556:2014 Ultrasonics. Field characterization. Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
BS EN 12102:2013 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level
CEI EN 61788-13 : 2013 SUPERCONDUCTIVITY - PART 13: AC LOSS MEASUREMENTS - MAGNETOMETER METHODS FOR HYSTERESIS LOSS IN SUPERCONDUCTING MULTIFILAMENTARY COMPOSITES
DIN EN ISO 16610-22:2016-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
BS ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers In-situ calibration of transducers with built in calibration coil
DIN EN ISO 16610-61:2016-04 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015)
BS ISO 17211:2015 Stationary source emissions. Sampling and determination of selenium compounds in flue gas
17/30362443 DC : 0 BS EN 407 - PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE)
DIN EN ISO 16610-85:2013-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
DKD-R 3-8 : 2010 STATISCHE KALIBRIERUNG VON KALIBRIEREINRICHTUNGEN FUER DREHMOMENTSCHRAUBWERKZEUGE
BS EN ISO 6145-5:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Capillary calibration devices
13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
15/30286366 DC : 0 BS ISO 19030-1 - SHIPS AND MARINE TECHNOLOGY - MEASUREMENT OF CHANGES IN HULL AND PROPELLER PERFORMANCE - PART 1: GENERAL PRINCIPLES
UNE-EN ISO 11665-5:2016 Measurement of radioactivity in the environment -Air: radon-222 - Part 5: Continuous measurement method of the activity concentration (ISO 11665-5:2012)
UNE 206014:2017 Tests for the determination of the solar field efficiency of solar thermal power plants with parabolic trough collector technology
13/30258884 DC : 0 BS ISO 11665-10 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON 222 - PART 10: DETERMINATION OF THE DIFFUSION COEFFICIENT IN WATERPROOF MATERIALS USING ACTIVITY CONCENTRATION MEASUREMENT
10/30215322 DC : 0 BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION
BS ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
PD ISO/TR 14345:2012 Fatigue. Fatigue testing of welded components. Guidance
BS ISO 16840-2:2018 Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity
13/30254352 DC : 0 BS ISO 50015 - MEASUREMENT AND VERIFICATION OF ORGANIZATIONAL ENERGY PERFORMANCE - GENERAL PRINCIPLES AND GUIDANCE
S.R. CEN/TR 1030-2:2016 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
BS ISO 7503-1:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination General principles
EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
12/30255465 DC : 0 BS ISO 12999-1 - ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION
CEI EN 61746-2 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
BS EN 60154-2:2016 Flanges for waveguides Relevant specifications for flanges for ordinary rectangular waveguides
I.S. EN ISO 16610-61:2015 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS (ISO 16610-61:2015)
BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
DIN EN ISO/IEC 17043 E : 2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
BS EN 31010:2010 Risk management. Risk assessment techniques
ISO/TS 20175:2018 Vacuum technology Vacuum gauges Characterization of quadrupole mass spectrometers for partial pressure measurement
ISO 24496:2017 Office furniture Office chairs Methods for the determination of dimensions
ECA 10-15 : 2015 GUIDELINES ON THE CALIBRATION OF DIGITAL MULTIMETERS
BS EN 60318-3:2015 Electroacoustics. Simulators of human head and ear Acoustic coupler for the calibration of supra-aural earphones used in audiometry
DIN EN ISO 21258 E : 2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD
BS ISO 11665-1 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS
BS EN 62607-3-1:2014 Nanomanufacturing. Key control characteristics Luminescent nanomaterials. Quantum efficiency
BS EN ISO/IEC 17043:2010 Conformity assessment. General requirements for proficiency testing
14/30286829 DC : 0 BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING
DIN EN 14793 E : 2017 STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD
14/30289065 DC : 0 BS ISO 17534-1 - ACOUSTICS - SOFTWARE FOR THE CALCULATION OF SOUND OUTDOORS - PART 1: QUALITY REQUIREMENTS AND QUALITY ASSURANCE
17/30341492 DC : 0 BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS
17/30347199 DC : 0 BS EN ISO 204 - METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST
BS ISO 2469:2014 Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor)
BS EN 1793-6:2012 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions
DIN EN ISO 8041-1:2017-10 HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017)
UNI CEI CEN/TR 16469 : 2014 HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS
13/30214514 DC : 0 BS ISO 6145-2 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 2: VOLUMETRIC PUMPS
BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments
EN ISO 19238:2017 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014)
I.S. EN ISO 14720-1:2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013)
DIN EN ISO 12999-1 E : 2014 ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014)
14/30284635 DC : 0 BS ISO 11665-11 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 11: TEST METHOD FOR SOIL GAS WITH SAMPLING AT DEPTH
16/30332792 DC : DRAFT APR 2016 BS EN ISO 2360 - NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD
16/30313874 DC : 0 BS ISO 4094 - PAPER, BOARD, AND PULPS - GENERAL REQUIREMENTS FOR THE COMPETENCE OF LABORATORIES AUTHORIZED FOR THE ISSUE OF OPTICAL REFERENCE TRANSFER STANDARDS OF LEVEL 3
BS ISO 19238 : 2014 RADIOLOGICAL PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS
BS ISO 18946:2011 Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
BS EN 61674:2013 Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
ISO/TR 17243-2:2017 Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
15/30280916 DC : 0 BS ISO 22262-3 - AIR QUALITY - BULK MATERIALS - PART 3: QUANTITATIVE DETERMINATION OF ASBESTOS BY X-RAY DIFFRACTION METHOD
BS EN 50379-2:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Performance requirements for apparatus used in statutory inspections and assessment
UNI EN ISO 80601-2-61 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
ISO 26101:2017 Acoustics Test methods for the qualification of free-field environments
DIN EN ISO 9295 E : 2015 ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT (ISO 9295:2015)
BS EN ISO 25139:2011 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
16/30341458 DC : 0 BS ISO 16063-45 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 45: IN-SITU CALIBRATION OF TRANSDUCERS WITH BUILT IN CALIBRATION COIL
BS EN ISO 80601-2-61:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment
13/30265648 DC : 0 BS ISO 22514-8 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 8: MACHINE PERFORMANCE OF A MULTI-STATES PRODUCTION PROCESS
BS EN 19694-3:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Cement industry
10/30186202 DC : 0 BS ISO 11665-7 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 7: RADON-222: SPOT MEASUREMENT METHODS OF RADON ACTIVITY CONCENTRATION IN THE ATMOSPHERIC ENVIRONMENT
BS EN ISO 16000-26:2012 Indoor air Sampling strategy for carbon dioxide (CO<sub>2</sub>)
09/30118876 DC : 0 ISO 20785-2 - DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE
15/30293075 DC : 0 BS EN ISO 6789-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY
16/30266428 DC : DRAFT MAR 2016 BS EN ISO 6145-6 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 6: CRITICAL FLOW ORIFICES
I.S. EN ISO 14720-2:2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013)
BS ISO 21438-3:2010 Workplace atmospheres. Determination of inorganic acids by ion chromatography Hydrofluoric acid and particulate fluorides
BS ISO 16638-1 : 2015 COR 2017 RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS
BS ISO 18941:2017 Imaging materials. Colour reflection prints. Test method for ozone gas fading stability
DIN EN ISO 16610-21:2013-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
PD ISO/TS 17503:2015 Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs
DIN ISO 16000-6:2012-11 Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011)
BS ISO 15042:2017 Multiple split-system air conditioners and air-to-air heat pumps. Testing and rating for performance
OIML G 1-106 : 2012 EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
PD CEN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
17/30355564 DC : 0 BS EN 61869-13 ED.1.0 - INSTRUMENT TRANSFORMERS - PART 13: STAND-ALONE MERGING UNIT
I.S. EN ISO 1938-2:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
PD IEC/TS 62600-200:2013 Marine energy. Wave, tidal and other water current converters Electricity producing tidal energy converters. Power performance assessment
PD CEN/TR 1030-2:2016 Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
BS ISO 6107-2 : 2006 WATER QUALITY - VOCABULARY - PART 2
BS EN ISO 19238:2017 Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
SAE AIR 6504 : 2017 PROCEDURE FOR THE CALCULATION OF NON-VOLATILE PARTICULATE MATTER SAMPLING AND MEASUREMENT SYSTEM PENETRATION FUNCTIONS AND SYSTEM LOSS CORRECTION FACTORS
BS ISO 27894:2009 Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges
CSA Z24510 : 2010 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS
12/30249815 DC : 0 BS ISO 230-2 - TEST CODE FOR MACHINE TOOLS - PART 2: DETERMINATION OF ACCURACY AND REPEATABILITY OF POSITIONING OF NUMERICALLY CONTROLLED AXES
ISO/TS 19159-1:2014 Geographic information Calibration and validation of remote sensing imagery sensors and data Part 1: Optical sensors
ISO/TR 14253-6:2012 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
BS ISO 22262-3:2016 Air quality. Bulk materials Quantitative determination of asbestos by X-ray diffraction method
BS ISO 3846:2008 Hydrometry. Open channel flow measurement using rectangular broad-crested weirs
ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
I.S. EN ISO 16911-1:2013 STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013)
ISO 362-2:2009 Measurement of noise emitted by accelerating road vehicles Engineering method Part 2: L category
BS ISO 27048:2011 Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure
14/30281850 DC : 0 BS EN ISO 2178 - NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD
EN 61577-2:2017 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
BS ISO 29661 : 2012 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS
ISO/TR 16268:2009 Surface chemical analysis Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
MIL-PRF-31032 Revision C:2016 Printed Circuit Board/Printed Wiring Board, General Specification for
BS ISO 22514-8:2014 Statistical methods in process management. Capability and performance Machine performance of a multi-state production process
DKD-R 6-2-1 : 2002
BS EN ISO 16610-71:2014 Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
PD ISO/TR 17243-1:2014 Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min<sup>-1</sup> and 30 000 min<sup>-1</sup>
BS ISO 20233-1:2018 Ships and marine technology. Model test method for propeller cavitation noise evaluation in ship design Source level estimation
10/30210537 DC : DRAFT JUNE 2010 BS ISO 18132-1 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 1: AUTOMATIC TANK GAUGES FOR LIQUEFIED NATURAL GAS ON BOARD MARINE CARRIERS AND FLOATING STORAGE
BS EN 50564:2011 Electrical and electronic household and office equipment. Measurement of low power consumption
17/30285147 DC : 0 BS ISO 18326 - SINGLE-DUCT PORTABLE AIRCONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE
BS EN 62282-3-200:2016 Fuel cell technologies Stationary fuel cell power systems. Performance test methods
BS EN ISO 10360-10:2016 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers for measuring point-to-point distances
15/30327269 DC : 0 BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS
BS ISO 13168:2015 Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting
I.S. EN ISO 16610-71:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014)
ISO 16405:2015 Room corner and open calorimeter Guidance on sampling and measurement of effluent gas production using FTIR technique
BS IEC 62232:2011 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
DIN EN 16913 E : 2017 AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS
BS ISO 11704 : 2010 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD
BS ISO 19970:2017 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Metering of gas as fuel on LNG carriers during cargo transfer operations
15/30321297 DC : 0 BS EN 1793-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
16/30342722 DC : 0 BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES
16/30332952 DC : 0 BS ISO 14146 - RADIATION PROTECTION - CRITERIA AND PERFORMANCE LIMITS FOR THE PERIODIC EVALUATION OF DOSIMETRY SERVICES
BS EN ISO 10703:2015 Water quality. Determination of the activity concentration of radionuclides. Method by high resolution gamma-ray spectrometry
I.S. EN 19694-6:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY
17/30344792 DC : 0 BS EN 61788-24 - SUPERCONDUCTIVITY - PART 24: CRITICAL CURRENT MEASUREMENT - RETAINED CRITICAL CURRENT AFTER DOUBLE BENDING AT ROOM TEMPERATURE OF AG-SHEATHED BI-2223 SUPERCONDUCTING WIRES
09/30191459 DC : 0 BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS
PREN 50563 : DRAFT 2011 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
DIN EN ISO 22476-5:2013-03 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
CEI EN 60904-4 : 2010 PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY
BS ISO 11382:2010 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
DIN ISO 3567 E : 2015 VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011)
I.S. EN ISO 9696:2017 WATER QUALITY - GROSS ALPHA ACTIVITY - TEST METHOD USING THICK SOURCE (ISO 9696:2017)
17/30341082 DC : 0 BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
DIN EN ISO 27971:2015-11 Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015)
DIN ISO 24173:2013-04 MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION (ISO 24713:2009)
BS 17898:2014 Code of practice for the management of observed hydrometric data
PD IEC/TS 62941:2016 Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval
ISO 17736:2010 Workplace air quality Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography
UNE-EN 15852:2010 Ambient air quality - Standard method for the determination of total gaseous mercury
DIN EN 15991:2016-02 TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV)
16/30333694 DC : 0 BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS
17/30319520 DC : 0 BS ISO 20289 - SURFACE CHEMICAL ANALYSIS - TOTAL REFLECTION X-RAY FLUORESCENCE ANALYSIS OF WATER SAMPLES
BS EN 61757-1:2012 Fibre optic sensors Generic specification
11/30218527 DC : 0 BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS
BS EN ISO 15971:2014 Natural gas. Measurement of properties. Calorific value and Wobbe index
15/30318694 DC : 0 BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD
DIN EN ISO 17450-2:2013-04 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
DIN EN ISO 13473-5:2010-04 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO 13473-5:2009)
UNE 83321:2017 EX Concrete with photocatalytic activity. Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials. Continuous flow test method
BS ISO/IEC 18047-2:2012 Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications below 135 kHz
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
UNE-EN 50383:2011 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz)
FD X07 023 : 2012 FD METROLOGIE - EVALUATION DE L'INCERTITUDE DE MESURE PAR LA METHODE MONTE CARLO - PRINCIPES ET MISE EN OEUVRE DU SUPPLEMENT 1 AU GUM
ASTM E 170 : 2017 : REDLINE Standard Terminology Relating to Radiation Measurements and Dosimetry
DIN EN ISO 13199:2013-02 STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012)
DIN EN ISO 80000-1:2013-08 Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011)
10/30238725 DC : 0 BS EN 60469 - TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS
CEI EN 62522 : 2014 CALIBRATION OF TUNEABLE LASER SOURCES
ISO 16494:2014 Heat recovery ventilators and energy recovery ventilators Method of test for performance
11/30227624 DC : 0 BS EN ISO 14720-2 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP/AES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW
CEI EN 61000-4-22 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS)
14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
12/30248590 DC : 0 BS ISO 14577-3 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods Critical flow orifices
BS EN ISO 16859-1:2015 Metallic materials. Leeb hardness test Test method
10/30217545 DC : 0 BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING
BS ISO/IEC 18046-2:2011 Information technology. Radio frequency identification device performance test methods Test methods for interrogator performance
CEI EN 61094-3 : 1997 ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 3: PRIMARY METHOD FOR FREE-FIELD CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE
CEI EN 62479 : 2013 ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ - 300 GHZ)
DIN ISO 22309:2015-11 MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011)
BS ISO 13164-3:2013 Water quality. Radon-222 Test method using emanometry
DIN EN ISO 13160 E : 2016 WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012)
BS EN 50380:2017 Marking and documentation requirements for Photovoltaic Modules
10/30179537 DC : 0 BS ISO 11665-1 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 1: RADON-222 AND ITS SHORT-LIVED DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT: THEIR ORIGINS AND MEASUREMENT METHODS
15/30291643 DC : 0 BS ISO 18516 - SURFACE CHEMICAL ANALYSIS - DETERMINATION OF LATERAL RESOLUTION AND SHARPNESS IN BEAM BASED METHODS
NF EN ISO 17201-5 : 2010 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 5: NOISE MANAGEMENT
CEI EN 61577-2 : 1ED 2018 RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS
15/30297958 DC : 0 BS EN 62271-100 ED 2.0 /A2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING CURRENT CIRCUIT-BREAKERS
10/30201940 DC : 0 ISO/DIS 13162 - WATER QUALITY - DETERMINATION OF CARBON 14 ACTIVITY - LIQUID SCINTILLATION COUNTING METHOD
13/30277795 DC : 0 BS EN ISO 17892-1 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 1: DETERMINATION OF WATER CONTENT (CONVERSION OF CEN ISO TS 17892-1 INTO EN)
BS EN ISO 6142-1:2015 Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures
BS EN ISO 16664:2017 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines
BS EN 16211:2015 Ventilation for buildings. Measurement of air flows on site. Methods
PD ISO/TR 17243-2:2017 Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min
BS IEC 61577-2 : 2014 RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS
12/30251712 DC BS ISO/ASTM 52116. Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator
BS EN 12405-2:2012 Gas meters. Conversion devices Energy conversion
15/30284307 DC : 0 BS ISO 5151 - NON-DUCTED AIR CONDITIONERS AND HEAT PUMPS - TESTING AND RATING FOR PERFORMANCE
09/30151431 DC : 0 BS ISO 27048 - RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE
09/30201391 DC : 0 BS EN 55016-4-2 ED.2 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY
BS ISO 13474:2009 Acoustics. Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
DIN ISO 13472-2:2010-12 Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces (ISO 13472-2:2010)
BS ISO 18589-6:2009 Measurement of radioactivity in the environment. Soil Measurement of gross alpha and gross beta activities
ISO Guide 31:2015 Reference materials — Contents of certificates, labels and accompanying documentation
10/30200748 DC : 0 BS ISO 13160 - WATER QUALITY - MEASUREMENT OF STRONTIUM 90 AND STRONTIUM 89
PD IEC/TS 62886:2016 Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz
BS EN ISO 9493:2010 Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements
CSA ISO/IEC TR 18047-6 : 2013 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ
BS ISO 4377:2012 Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs
UNE-EN 60645-6:2010 Electroacoustics - Audiometric equipment -- Part 6: Instruments for the measurement of otoacoustic emissions
ISO 20233-1:2018 Ships and marine technology — Model test method for propeller cavitation noise evaluation in ship design — Part 1: Source level estimation
UNE-EN ISO 16641:2016 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014)
13/30275218 DC : 0 BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE
11/30217430 DC : 0 BS EN 60404-15 - MAGNETIC MATERIALS - PART 15: - METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS
14/30268531 DC : 0 BS EN ISO 6892-1 - METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE
BS ISO 6145-2:2014 Gas analysis. Preparation of calibration gas mixtures using dynamic methods Piston pumps
BS EN ISO 6789-1:2017 Assembly tools for screws and nuts. Hand torque tools Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
BS EN ISO 389-9:2009 Acoustics. Reference zero for the calibration of audiometric equipment Preferred test conditions for the determination of reference hearing threshold levels
13/30264462 DC : 0 BS EN ISO 6508-1 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD
BS ISO 11665-7 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 7: ACCUMULATION METHOD FOR ESTIMATING SURFACE EXHALATION RATE
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
PREN 16002 : DRAFT 2016 FLEXIBLE SHEETS FOR WATERPROOFING - DETERMINATION OF THE RESISTANCE TO WIND LOAD OF MECHANICALLY FASTENED FLEXIBLE SHEETS FOR ROOF WATERPROOFING
13/30214533 DC : 0 BS ISO 14385-2 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 2: ONGOING QUALITY CONTROL OF AUTOMATED MEASURING SYSTEMS
16/30295054 DC : DRAFT APR 2016 BS ISO 12963 - GAS ANALYSIS - COMPARISON METHODS FOR THE DETERMINATION OF THE COMPOSITION OF GAS MIXTURES BASED ON ONE- AND TWO-POINT CALIBRATION
16/30313383 DC : 0 BS ISO 19970 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - METERING OF GAS AS FUEL ON LNG CARRIERS DURING CARGO TRANSFER OPERATIONS
BS EN 62047-26:2016 Semiconductor devices. Micro-electromechanical devices Description and measurement methods for micro trench and needle structures
PD CEN/TR 16193:2013 Sludge, treated biowaste and soil. Detection and enumeration of Escherichia coli
15/30314073 DC : 0 BS 16913 - AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5
BS EN ISO 22476-5:2012 Geotechnical investigation and testing. Field testing Flexible dilatometer test
16/30344762 DC : 0 BS EN 62442-1 ED1.0/A1 - ENERGY PERFORMANCE OF LAMP CONTROLGEAR - PART 1: CONTROLGEAR FOR FLUORESCENT LAMPS - METHOD OF MEASUREMENT TO DETERMINE THE TOTAL INPUT POWER OF CONTROLGEAR CIRCUITS AND THE EFFICIENCY OF THE CONTROLGEAR
14/30274825 DC : 0 BS ISO 7503-2 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND E EVALUATION OF SURFACE CONTAMINATION - PART 2: TEST METHOD USING WIPE-TEST SAMPLES
I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics
BS ISO 1438:2017 Hydrometry. Open channel flow measurement using thin-plate weirs
17/30355634 DC : 0 BS EN 62311 ED.2.0 - ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
UNE-EN 15980:2011 Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene
ASTM E 1834 : 2011 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
18/30368158 DC : 0 BS EN 50413 - BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
PD ISO/IEC TR 18047-6:2011 Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz
BS ISO 22514-1:2014 Statistical methods in process management. Capability and performance General principles and concepts
BS ISO 9697 : 2015 WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE
16/30334810 DC : 0 BS EN 62751-1:2014/A1 - POWER LOSSES IN VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
12/30255984 DC : 0 BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY
15/30326444 DC : 0 BS EN 60942 - ELECTROACOUSTICS - SOUND CALIBRATORS
15/30331502 DC : DRAFT DEC 2015 BS EN ISO 9696 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD
BS ISO 16269-6:2014 Statistical interpretation of data Determination of statistical tolerance intervals
BS EN 62387:2016 Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation
UNI EN ISO 14064-1 : 2012 GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS
BS EN 61260-1:2014 Electroacoustics. Octave-band and fractional-octave-band filters Specifications
I.S. EN 16211:2015 VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS
PD ISO/IEC TR 18047-7:2010 Information technology. Radio frequency identification device conformance test methods Test methods for active air interface communications at 433 MHz
EN 61000-4-31:2017 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
BS EN 61672-3:2013 Electroacoustics. Sound level meters Periodic tests
CSA ISO 10012 : 2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
PREN 1793-2 : DRAFT 2016 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 2: INTRINSIC CHARACTERISTICS OF AIRBORNE SOUND INSULATION UNDER DIFFUSE SOUND FIELD CONDITIONS
BS ISO 17089-1:2019 Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement
EN ISO 13162:2015 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011)
CEI EN 61746-1 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
NF EN ISO 13473-5 : 2010 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
ISO 6789-2:2017 Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty
BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
PREN ISO 11200 : DRAFT 2012 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
BS EN 61788-13:2012 Superconductivity AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
ISO 16966:2013 Nuclear energy Nuclear fuel technology Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors
BS EN 60118-0:2015 Electroacoustics. Hearing aids Measurement of the performance characteristics of hearing aids
UNE-EN ISO 17450-2:2015 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
UNE-ISO 7504:2016 Gas analysis. Vocabulary
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
CAN/CSA-C393-12 (R2017) Test methods for measuring power consumption in low and idle power modes of commercial and industrial equipment
UNI EN ISO 21258 : 2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD
CSA N288.5 : 2011 : R2016 EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS
ISO/PAS 17208-1:2012 Acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: General requirements for measurements in deep water
BS EN 61788-12:2013 Superconductivity Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires
UNE-EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion
ASHRAE GUIDELINE 2 : 2010 ENGINEERING ANALYSIS OF EXPERIMENTAL DATA
CEI EN 61083-2 : 2014 INSTRUMENTS AND SOFTWARE USED FOR MEASUREMENT IN HIGH-VOLTAGE AND HIGH-CURRENT TESTS - PART 2: REQUIREMENTS FOR SOFTWARE FOR TESTS WITH IMPULSE VOLTAGES AND CURRENTS
EN 61400-12-1:2017 Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines
ISO 12354-1:2017 Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms
CEI EN 61788-5 : 2014 SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES
08/30169333 DC : DRAFT MAR 2008 BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS
UNE-EN ISO 25178-602:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
I.S. EN ISO 13199:2012 STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012)
I.S. EN ISO 4373:2008 HYDROMETRY - WATER LEVEL MEASURING DEVICES
CSA ISO/IEC TR 18047-7 : 2012 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 7: TEST METHODS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ
ISO 21438-3:2010 Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides
I.S. EN ISO 80000-1:2013 QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011)
CSA ISO/IEC TR 18047-4 : 2005 : R2010 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ
DIN ISO 16592 E : 2015 MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR DETERMINING THE CARBON CONTENT OF STEELS USING A CALIBRATION CURVE METHOD (ISO 16592:2012)
API MPM TR 2570 : 2010 CONTINUOUS ON-LINE MEASUREMENT OF WATER CONTENT IN PETROLEUM (CRUDE OIL AND CONDENSATE)
DIN EN ISO 13161:2016-01 WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY (ISO 13161:2011)
CSA N292.5 : 2011 : R2016 GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES
CSA ISO 14064-1 : 2006 : R2016 GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS
ISO 9698:2010 Water quality Determination of tritium activity concentration Liquid scintillation counting method
I.S. EN ISO 18589-7:2016 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 7: IN SITU MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES (ISO 18589-7:2013)
DIN EN ISO 6142-1 E : 2015 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 61421:2015)
ISO 9697:2015 Water quality Gross beta activity in non-saline water Test method using thick source
IEC TR 61000-1-6:2012 Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty
ISO 12764:2017 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
CSA C61400-11 : 2007 : R2012 WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
NF ISO 13161 : 2011 WATER QUALITY - MEASUREMENT OF POLONIUM 210 ACTIVITY CONCENTRATION IN WATER BY ALPHA SPECTROMETRY
EN ISO 20785-2:2017 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)
CEI EN 61000-4-6 : 2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
BS ISO 532-1:2017 Acoustics. Methods for calculating loudness Zwicker method
IES LM 79 : 2008 ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS
I.S. EN 19694-1:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS
ISO/IEC TR 18047-3:2011 Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz
I.S. EN 62555:2014 ULTRASONICS - POWER MEASUREMENT - HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) TRANSDUCERS AND SYSTEMS
ISO 3846:2008 Hydrometry Open channel flow measurement using rectangular broad-crested weirs
ISO 13163:2013 Water quality Lead-210 Test method using liquid scintillation counting
ISO/TS 19159-2:2016 Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 2: Lidar
ASTM E 2859 : 2011 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
ISO 22514-7:2012 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes
ISO 14934-1:2010 Fire tests Calibration and use of heat flux meters Part 1: General principles
ISO 25178-71:2017 Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
I.S. EN 60645-7:2010 ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 7: INSTRUMENTS FOR THE MEASUREMENT OF AUDITORY BRAINSTEM RESPONSES
ISO 13164-3:2013 Water quality — Radon-222 — Part 3: Test method using emanometry
I.S. EN 60456:2016 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
BIS IS 1500-1 : 2013 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD
I.S. EN 61280-4-2:2014 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
I.S. EN ISO 12999-1:2014 ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014)
CEI UNI 70099 : 2010 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
ASTM D 6061 : 2001 : R2018 : EDT 1 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
I.S. EN 19694-2:2016 STATIONARY SOURCE EMISSIONS - GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 2: IRON AND STEEL INDUSTRY
S.R. CEN/TR 16193:2013 SLUDGE, TREATED BIOWASTE AND SOIL - DETECTION AND ENUMERATION OF ESCHERICHIA COLI
ISO 20903:2011 Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Methods used to determine peak intensities and information required when reporting results
I.S. EN ISO 13138:2012 AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM (ISO 13138:2012)
CEI EN 61215-1 : 1ED 2017 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS
I.S. EN ISO 6789-1:2017 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017)
PD IEC/TR 61282-14:2016 Fibre optic communication system design guides Determination of the uncertainties of attenuation measurements in fibre plants
I.S. EN ISO 9698:2015 WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010)
ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
BS EN 1793-5:2016 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound reflection under direct sound field conditions
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
BS EN 62127-1 : 2007 ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ
S.R. CEN/TR 17055:2017 WORKPLACE EXPOSURE - MEASUREMENT OF CHEMICAL AGENTS COMPLYING WITH THE REQUIREMENTS GIVEN IN EN 482 AND EITHER ONE OF EN 838, EN 1076, EN 13205, EN 13890 AND EN 13936 - CHOICE OF PROCEDURES
BS EN 61672-2 : 2013 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS
I.S. EN ISO 15651:2017 NUCLEAR ENERGY - DETERMINATION OF TOTAL HYDROGEN CONTENT IN PUO[2] AND UO[2] POWDERS AND UO[2], (U,GD)O[2] AND (U,PU)O[2] SINTERED PELLETS - INERT GAS EXTRACTION AND CONDUCTIVITY DETECTION METHOD (ISO 15651:2015)
ISO 7500-1:2018 Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
I.S. EN 16012:2012 THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE
EN 60154-4 : 2017 Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides
I.S. EN ISO 3095:2013 ACOUSTICS - RAILWAY APPLICATIONS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES (ISO 3095:2013)
ANSI S3.36 : 2012 SPECIFICATION FOR A MANIKIN FOR SIMULATED IN-SITU AIRBORNE ACOUSTIC MEASUREMENTS
S.R. CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
I.S. EN ISO 11704:2015 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010)
I.S. EN 15841:2009 AMBIENT AIR QUALITY - STANDARD METHOD FOR DETERMINATION OF ARSENIC, CADMIUM, LEAD AND NICKEL IN ATMOSPHERIC DEPOSITION
IEC 60942:2017 Electroacoustics - Sound calibrators
ISO 230-1:2012 Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
ISO/TR 19319:2013 Surface chemical analysis Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
ISO 18937:2014 Imaging materials Photographic reflection prints Methods for measuring indoor light stability
ISO/TS 19159-3:2018 Geographic information Calibration and validation of remote sensing imagery sensors and data Part 3: SAR/InSAR
I.S. EN ISO 16859-3:2015 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015)
UNE-ISO 22514-1:2017 Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts
ISO 6145-2:2014 Gas analysis Preparation of calibration gas mixtures using dynamic methods Part 2: Piston pumps
BS EN 50563 : 2011 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
ISO 21439:2009 Clinical dosimetry Beta radiation sources for brachytherapy
I.S. EN ISO 2360:2017 NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017)
ISO 20263:2017 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
CEI EN 50379-1 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
CEI EN 61672-2 : 2014 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS
NF EN 62489-1 : 2010 AMD 2 2018 ELECTROACOUSTICS - AUDIO-FREQUENCY INDUCTION LOOP SYSTEMS FOR ASSISTED HEARING - PART 1: METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SYSTEM COMPONENTS
I.S. EN 61000-4-21:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS
I.S. EN 16450:2017 AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5)
I.S. EN ISO 11665-5:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 5: CONTINUOUS MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION (ISO 11665-5:2012)
ISO 17179:2016 Stationary source emissions — Determination of the mass concentration of ammonia in flue gas — Performance characteristics of automated measuring systems
UNI CEI ISO/IEC 17007 : 2010 CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
UNI EN ISO 14253-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
UNI EN 15841 : 2010 AMBIENT AIR QUALITY - STANDARD METHOD FOR DETERMINATION OF ARSENIC, CADMIUM, LEAD AND NICKEL IN ATMOSPHERIC DEPOSITION
UNI ISO 10817-1 : 2011 ROTATING SHAFT VIBRATION MEASURING SYSTEMS - PART 1: RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION
ISO 22262-3:2016 Air quality Bulk materials Part 3: Quantitative determination of asbestos by X-ray diffraction method
ISO 50015:2014 Energy management systems Measurement and verification of energy performance of organizations General principles and guidance
I.S. EN ISO 15112:2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
UNI EN ISO 12311 : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR
BS EN ISO 6416:2005 Hydrometry. Measurement of discharge by the ultrasonic (acoustic) method
I.S. EN 61724-1:2017 PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING
ISO 19467:2017 Thermal performance of windows and doors — Determination of solar heat gain coefficient using solar simulator
CSA C813.1 : 2014 PERFORMANCE TEST METHOD FOR UNINTERRUPTIBLE POWER SUPPLIES
ISO/TR 20461:2000 Determination of uncertainty for volume measurements made using the gravimetric method
ISO 6145-7:2009 Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 7: Thermal mass-flow controllers
BS ISO 7504:2015 Gas analysis. Vocabulary
CEI EN 61788-16 : 2013 SUPERCONDUCTIVITY - PART 16: ELECTRONIC CHARACTERISTIC MEASUREMENTS - POWER DEPENDENT SURFACE RESISTANCE OF SUPERCONDUCTORS AT MICROWAVE FREQUENCIES
UNE-EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
I.S. EN 62359:2011 ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS
ISO 16840-6:2015 Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions
IEC TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
UNE-EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
ISO/TS 28037:2010 Determination and use of straight-line calibration functions
EN ISO 20785-3:2017 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015)
UNE-EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
ISO 15042:2017 Multiple split-system air conditioners and air-to-air heat pumps — Testing and rating for performance
EN ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
ISO 30011:2010 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
16/30338920 DC : 0 BS EN 14325 - PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES
ASTM D 6061 : 2001 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
UNE-EN ISO 22476-7:2015 Geotechnical investigation and testing - Field testing - Part 7: Borehole jack test (ISO 22476-7:2012)
DIN EN ISO 10704:2015-11 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009)
NF EN 60904-4 : 2010 PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY
UNE-EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
ANSI/ASA S1.15 PART 2 : 2005(R2015) MEASUREMENT MICROPHONES - PART 2: PRIMARY METHOD FOR PRESSURE CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE
NF EN ISO 21258 : 2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD
BS EN 13032-4:2015 Light and lighting. Measurement and presentation of photometric data of lamps and luminaires LED lamps, modules and luminaires
UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
AGA XQ0901 : 0 AGA REPORT NO. 5, NATURAL GAS ENERGY MEASUREMENT
ISO 11665-11:2016 Measurement of radioactivity in the environment Air: radon-222 Part 11: Test method for soil gas with sampling at depth
IEC TS 62941:2016 Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval
ISO 16269-6:2014 Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals
ISO 12828-2:2016 Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods
ASTM E 2972 : 2015 Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials
IEC 61786-2:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements
UNE-EN ISO 16859-2:2016 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
UNE-EN 16272-6:2015 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
CEI EN 50383 : 2013 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
OVE/ONORM EN 55016-4-2 : 2014 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY (CISPR 16-4-2:2011 + A1:2014)
UNI EN ISO 6145-5 : 2011 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 5: CAPILLARY CALIBRATION DEVICES
CEI EN 60318-1 : 2011 ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 1: EAR SIMULATOR FOR THE MEASUREMENT OF SUPRA-AURAL AND CIRCUMAURAL EARPHONES
UNE-EN ISO 6506-2:2015 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
UNI EN ISO 17450-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
ISO 27894:2009 Vacuum technology Vacuum gauges Specifications for hot cathode ionization gauges
DKD-R 3-1-1 : 2010 KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - BLATT 1: GRUNDLAGEN
ANSI/ASA S1.4 PART 2 : 2014 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS
ASTM E 2594 : 2009 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
I.S. EN ISO 15194:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
ISO 15112:2011 Natural gas Energy determination
I.S. EN ISO 16859-2:2015 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015)
ASTM E 2594 : 2009 : R2014 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 2371 : 2013 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
I.S. EN 61674:2013 MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING (IEC 61674:2012 (EQV))
ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
ASTM C 1128 : 2018 : REDLINE Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ISO/TS 23165:2006 Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
ISO 4359:2013 Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes
IEC 60645-1:2017 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone and speech audiometry
ISO 11665-5:2012 Measurement of radioactivity in the environment Air: radon-222 Part 5: Continuous measurement method of the activity concentration
EN 61400-11:2013 Wind turbines - Part 11: Acoustic noise measurement techniques
IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
ISO 6141:2015 Gas analysis Contents of certificates for calibration gas mixtures
DIN EN ISO 6974-2 E : 2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012)
DIN EN ISO 9513 E : 2013 METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012 + COR 1:2013)
DIN EN ISO 20743 E : 2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
DIN EN ISO 14577-3:2015-11 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015)
DIN EN ISO 11200:2014-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
DIN EN ISO 11137-3:2015-08 (Draft) STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
IEC 61280-1-1:2013 Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
BS EN ISO 10882-1:2011 Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of airborne particles
BS EN ISO 8253-3:2012 Acoustics. Audiometric test methods Speech audiometry
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter
UNE-EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
UNE-EN ISO 6974-5:2015 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)
ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition
BS EN ISO 748:2007 Hydrometry. Measurement of liquid flow in open channels using current-meters or floats
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters Verification and calibration of testing machines
UNE-EN 14181:2015 Stationary source emissions - Quality assurance of automated measuring systems
PD ISO/TS 20656-1:2017 Plastics piping systems. General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes Buried pipes
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
BS EN 14181:2014 Stationary source emissions. Quality assurance of automated measuring systems
UNE-EN ISO 11608-1:2015 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)
UNE-EN 61094-2:2011 Electroacoustics - Measurement microphones -- Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
DIN EN 14790:2006-04 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD
BS EN ISO 15011-1:2002 Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding Determination of emission rate and sampling for analysis of particulate fume
UNE-EN 61094-3:2017 Electroacoustics - Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
BS EN ISO 10846-2:2008 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
UNE-EN ISO 16000-26:2014 Indoor air - Part 26: Sampling strategy for carbon dioxide (CO2) (ISO 16000-26:2012)
UNE-EN ISO 6976:2017 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
ISO 11205:2003 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
ISO 14720-1:2013 Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods
ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing
BS EN ISO 8253-1:2010 Acoustics. Audiometric test methods Pure-tone air and bone conduction audiometry
BS EN ISO 11201:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 148-2:2016 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
BS EN ISO 10846-4:2003 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion
CISPR 17:2011 Methods of measurement of the suppression characteristics of passive EMC filtering devices
BS EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method
BS EN ISO 6976:2005 Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
ISO 11665-2:2012 Measurement of radioactivity in the environment Air: radon-222 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
BS EN 14791:2017 Stationary source emissions. Determination of mass concentration of sulphur oxides. Standard reference method
IEC 62047-26:2016 Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures
I.S. EN ISO 14577-2:2015 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015)
I.S. EN ISO 20743:2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
I.S. EN ISO 11608-1:2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion
EN 60645-7:2010 Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses
CEN/TR 1030-2:2016 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace
EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
BS 8888:2011 Technical product documentation and specification
EN 61094-2:2009 Electroacoustics - Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
EN 62321-1:2013 Determination of certain substances in electrotechnical products - Part 1: Introduction and overview
EN 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
EN 50380:2017 Marking and documentation requirements for Photovoltaic Modules
DIN EN ISO 148-2:2017-05 METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES (ISO 148-2:2016)
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
DIN ISO 5129:2014-11 Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight (ISO 5129:2001 + Amd.1:2013)
EN 55017 : 2011 METHODS OF MEASUREMENT OF THE SUPPRESSION CHARACTERISTICS OF PASSIVE EMC FILTERING DEVICES (CISPR 17:2011)
EN 61207-1:2010 Expression of performance of gas analyzers - Part 1: General
EN 50379-1:2012 Specification for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances - Part 1: General requirements and test methods
EN 60154-2:2016 Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides
CEN ISO/TS 16491 : 2012 GUIDELINES FOR THE EVALUATION OF UNCERTAINTY OF MEASUREMENT IN AIR CONDITIONER AND HEAT PUMP COOLING AND HEATING CAPACITY TESTS (ISO/TS 16491:2012)
EN 61083-2:2013 Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents
EN 62585 : 2012 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012)
EN 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
EN 12102:2013 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
DIN EN 14789:2017-05 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
EN 62607-3-1:2014 Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
IEC 60068-3-6:2018 RLV Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers
EN 61260-1:2014 Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
EN 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests
EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
EN ISO 19901-5:2016 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016)
EN 13032-4:2015 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires
EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
CEN/TR 16625 : 2013 FLEXIBLE SHEETS FOR WATERPROOFING - STATISTICAL DEFINITION OF MANUFACTURER&#39;S LIMITING VALUE AND DECLARED VALUE (MLV AND MDV) - 95% STATISTIC
DIN EN ISO 21649:2010-01 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
EN ISO 9513:2012/AC:2013 Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013)
EN 62387-1:2012 Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements
DIN ISO 362-1:2017-10 MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD - PART 1: M AND N CATEGORIES (ISO 362-1:2015)
EN 61094-8:2012/AC:2013 Measurement microphones — Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
EN 62387 : 2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED)
EN 50564:2011 Electrical and electronic household and office equipment - Measurement of low power consumption
DIN EN ISO 148-3:2017-04 METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016)
EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
EN 61788-5:2013 SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN 62129-2 : 2011 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 61157:2007/A1:2013 STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT (IEC 61157:2007/A1:2013)
EN 60500:2017 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
EN 62475 : 2010 HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS
EN 14793:2017 Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method
EN 62047-26:2016 Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures
CEN/TR 16338 : 2012 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - TEMPLATE FOR SUPPLYING INFORMATION ABOUT IMMUNOLOGICAL METHODS AND MOLECULAR BIOLOGICAL METHODS
OVE/ONORM EN 61400-11 : 2013 WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES (IEC 61400-11:2012)
ASME B89.3.7 : 2013 GRANITE SURFACE PLATES
ASME B89.1.7 : 2009 : R2014 PERFORMANCE STANDARD FOR STEEL MEASURING TAPES
MIL-PRF-55110 Revision H:2014 Printed Wiring Board, Rigid, General Specification for
ASME B89.1.7 : 2009 PERFORMANCE STANDARD FOR STEEL MEASURING TAPES
DEFSTAN 00-52/4(2014) : 2014 THE GENERAL REQUIREMENTS FOR PRODUCT ACCEPTANCE AND MAINTENANCE TEST SPECIFICATIONS AND TEST SCHEDULES
ASME B89.1.14 : 2018 CALIPERS
NF EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
OVE/ONORM EN 60645-6 : 2010 ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 6: INSTRUMENTS FOR THE MEASUREMENT OF OTOACOUSTIC EMISSIONS
VDI/VDE 2660 Blatt 1:2010-07 Experimental stress analysis - Optical strain sensor based on fibre Bragg grating - Fundamentals, characteristics and sensor testing
I.S. EN 61000-4-3:2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
ONORM EN ISO 3611 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
ONORM EN ISO 11608-1 : 2015 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014)
API MPM CH20.3 : 2013 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW
BS ISO 21360-1:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance General description
10/30196986 DC : 0 BS EN ISO 16000-26 - INDOOR AIR - PART 26: MEASUREMENT STRATEGY FOR CARBON DIOXIDE (CO[2])
UNE-ISO 16730-1:2017 Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General
IEC 60747-14-4:2011 Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers
10/30207290 DC : 0 BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
CAN/CSA-IEC 61000-4-6:15 (R2018) Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radiofrequency fields (Adopted IEC 61000-4-6:2013, fourth edition, 2013-10) | Compatibilité électromagnétique (CEM) - Partie 4-6 : Techniques d\'essai et de mesure - Immunité aux perturbations conduites, induites par les champs radioélectriques (norme IEC 61000-4-6:2013 adoptée, quatrième édition, 2013-10)
10/30197204 DC : 0 BS ISO 26101 - ACOUSTICS - TEST METHODS FOR THE QUALIFICATION OF FREE-FIELD ENVIRONMENTS
BS ISO 22309:2011 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
I.S. EN 61377:2016 RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS
BS EN 61966-5:2009 Multimedia systems and equipment. Colour measurement and management Equipment using plasma display panels
DIN EN ISO 14720-2:2013-06 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW (ISO 14720-2:2013)
BS ISO 19017 : 2015 COR 2017 GUIDANCE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE
10/30174936 DC : 0 BS ISO 11352 - WATER QUALITY - DETERMINATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION DATA
I.S. EN 62282-3-200:2016 FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
ASTM E 2994 : 2016 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
CEI EN 60318-4 : 2011 ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 4: OCCLUDED-EAR SIMULATOR FOR THE MEASUREMENT OF EARPHONES COUPLED TO THE EAR BY MEANS OF EAR INSERTS
DIN EN 15852 E : 2010 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY
14/30298593 DC : 0 BS EN 1793-4 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
10/30201937 DC : 0 BS ISO 13161 - WATER QUALITY - MEASUREMENT OF POLONIUM 210 CONCENTRATION ACTIVITY IN WATER BY ALPHA SPECTROMETRY
CSA C22.2 No. 60601.2.5:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT
11/30227621 DC : DRAFT MAY 2011 BS EN ISO 14720-1 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS
ISO 14701:2011 Surface chemical analysis X-ray photoelectron spectroscopy Measurement of silicon oxide thickness
ISO 14385-1:2014 Stationary source emissions Greenhouse gases Part 1: Calibration of automated measuring systems
14/30275429 DC : 0 BS ISO 16638-1 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: URANIUM
11/30245877 DC : 0 BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING
BS EN 16272-6:2014 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
12/30266709 DC : 0 BS EN ISO 4064-2 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
12/30256719 DC : 0 BS ISO/ASTM 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECTS RELEASE PROGRAMS
13/30279964 DC : 0 BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ANSI S12.57 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
UNE-EN ISO 27971:2015 Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015)
CSA Z24510 : 2010 : R2014 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS
BS EN ISO 16610-61:2015 Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
I.S. EN ISO 10704:2015 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD (ISO 10704:2009)
BS ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents Methodology for compiling data on environmentally significant emissions from fires
BS ISO 10505:2009 Photography. Root mean square granularity of photographic films. Method of measurement
ISO 29661:2012 Reference radiation fields for radiation protection — Definitions and fundamental concepts
13/30275718 DC : 0 BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
ISO 24095:2009 Workplace air Guidance for the measurement of respirable crystalline silica
DIN EN ISO 21258:2010-11 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N<(Index)2>O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)
11/30212853 DC : 0 BS ISO 14382 - WORKPLACE ATMOSPHERES - DETERMINATION OF TOLUENE DIISOCYANATE VAPORS USING 1-(2-PYRIDYL)PIPERAZINE-COATED GLASS FIBER FILTERS AND ANALYSIS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH ULTRAVIOLET AND FLUORESCENT DETECTORS
UNE-EN 16272-4:2017 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound field
10/30214880 DC : 0 BS ISO 18738-1 - MEASUREMENT OF LIFT RIDE QUALITY - PART 1: LIFTS (ELEVATORS)
BS EN 62058-21:2010 Electricity metering equipment (a.c.). Acceptance inspection Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)
ECA EURAMET CG-23 : 2018 GUIDELINES ON THE CALIBRATION OF ANGULAR ENCODERS
UNE-EN ISO 11608-5:2013 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
API MPM CH22.2 : 2017 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22 - TESTING PROTOCOL - SECTION 2 - DIFFERENTIAL PRESSURE FLOW MEASUREMENT DEVICES
BS EN ISO 11819-2:2017 Acoustics. Measurement of the influence of road surfaces on traffic noise The close-proximity method
I.S. EN 61005:2017 RADIATION PROTECTION INSTRUMENTATION - NEUTRON AMBIENT DOSE EQUIVALENT (RATE) METERS
I.S. EN 16272-6:2014 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
UNE-EN 61377:2016 Railway applications - Rolling stock - Combined test method for traction systems
BS ISO 50015:2014 Energy management systems. Measurement and verification of energy performance of organizations. General principles and guidance
ISO 13164-1:2013 Water quality — Radon-222 — Part 1: General principles
09/30208595 DC : 0 BS EN 61672-3 ED.2 - ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS
BS EN ISO 148-1:2016 Metallic materials. Charpy pendulum impact test Test method
ISO/TR 14345:2012 Fatigue Fatigue testing of welded components Guidance
BS ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
BS EN ISO 16641:2016 Measurement of radioactivity in the environment. Air. Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
BS EN ISO 14720-2:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
15/30295114 DC : 0 BS EN ISO 25178-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS
ISO 13943:2017 Fire safety — Vocabulary
10/30201740 DC : 0 BS ISO/IEC 18046-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
UNI EN 16603-10-09 : 2014 SPACE ENGINEERING - REFERENCE COORDINATE SYSTEM
DD ISO/TS 7849-1:2009 Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement Survey method using a fixed radiation factor
11/30252162 DC : 0 BS EN 62209-1 - HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 1: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR)FOR DEVICES USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ)
15/30332687 DC : 0 BS EN 60794-1-2 - OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - CROSS REFERENCE TABLE FOR OPTICAL CABLE TEST PROCEDURES
BS ISO 15651 : 2015 NUCLEAR ENERGY - DETERMINATION OF TOTAL HYDROGEN CONTENT IN PUO[2] AND UO[2] POWDERS AND UO[2], (U,GD)O[2] AND (U,PU)O[2] SINTERED PELLETS - INERT GAS EXTRACTION AND CONDUCTIVITY DETECTION METHOD
BS ISO 10302-2:2011 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements
10/30213857 DC : 0 BS ISO 8253-3 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY
16/30339586 DC : 0 BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
14/30303365 DC : 0 BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV
12/30258949 DC : 0 BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS
EN 62271-100 : 2009 AMD 2/COR 18 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008/A2:2017/COR1:2018)
15/30295576 DC : 0 BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS
PD ISO/TR 13014:2012 Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
16/30311281 DC : 0 BS EN ISO 19918 - PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - MEASUREMENT OF CUMULATIVE PERMEATION OF CHEMICALS WITH LOW VAPOUR PRESSURE THROUGH MATERIALS
CSA Z24512 : 2010 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES
16/30319087 DC : 0 BS ISO 9123 - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STAGE-FALL-DISCHARGE RELATIONSHIPS
I.S. EN ISO 16610-30:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 30: ROBUST PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-30:2015)
BS ISO 13164-2:2013 Water quality. Radon-222 Test method using gamma-ray spectrometry
BS EN ISO 16638-1:2017 Radiological protection. Monitoring and internal dosimetry for specific materials Inhalation of uranium compounds
17/30356677 DC : 0 BS ISO/ASTM 51538 - PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM
EI HM 56 : 2010 CONTINUOUS ON-LINE MEASUREMENT OF WATER CONTENT IN PETROLEUM (CRUDE OIL AND CONDENSATE)
12/30250625 DC : 0 BS EN 16272-6 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
DIN EN ISO 11608-5:2013-01 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012)
DIN EN 16012:2015-05 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance (includes Amendment A1:2015)
I.S. EN 16523-1:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
15/30293847 DC : 0 BS EN ISO 6416 - HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD
NF EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
14/30280137 DC : 0 BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
BS EN ISO 22476-7:2012 Geotechnical investigation and testing. Field testing Borehole jack test
16/30344112 DC : 0 BS ISO/ASTM 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY
PD IEC/PAS 63083:2017 Specific absorption rate (SAR) measurement procedure for long term evolution (LTE) devices
CEI EN 60731 : 2012 MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY
13/30277457 DC : 0 BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
PD IEC/TS 62600-100:2012 Marine energy. Wave, tidal and other water current converters Electricity producing wave energy converters. Power performance assessment
12/30237514 DC : 0 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
BS ISO 11665-6 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 6: SPOT MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION
BS ISO 17179:2016 Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems
PREN 14791 : DRAFT 2014 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD
DIN EN ISO 11201:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
ISO 16063-45:2017 Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
BS ISO 26303:2012 Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
PD IEC/TS 62282-7-1:2017 Fuel cell technologies Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS ISO 13166:2014 Water quality. Uranium isotopes. Test method using alpha-spectrometry
BS ISO 14382:2012 Workplace atmospheres. Determination of toluene diisocyanate vapours using 1-(2-pyridyl) piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
DIN ISO 16000-3 E : 2013 INDOOR AIR - PART 3: DETERMINATION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS IN INDOOR AIR AND TEST CHAMBER AIR
BS EN 60645-6:2010 Electroacoustics. Audiometric equipment Instruments for the measurement of otoacoustic emissions
13/30287223 DC : 0 BS ISO 19289 - METEOROLOGY - SITING CLASSIFICATIONS FOR SURFACE OBSERVING STATIONS ON LAND
PD ISO/TS 17822-1:2014 <i>In</i> <i>vitro</i> diagnostic test systems. Qualitative nucleic acid-based <i>in</i> <i>vitro</i> examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions
BS EN 62321-8:2017 Determination of certain substances in electrotechnical products Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
BS EN 16242:2012 Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property
11/30207395 DC : 0 BS ISO 13199 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOC) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED METHOD EQUIPPED WITH CATALYTIC CONVERTER
BS ISO 20785-1 : 2012 DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 1: CONCEPTUAL BASIS FOR MEASUREMENTS
BS EN ISO 22007-4:2017 Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method
PD CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
BS ISO 9296:2017 Acoustics. Declared noise emission values of information technology and telecommunications equipment
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
12/30259914 DC : 0 BS EN ISO 8311 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTIC DISTANCE-RANGING METHODS
11/30148668 DC : 0 IEC 61400-12-2 - WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITY PRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY
ISO 7503-1:2016 Measurement of radioactivity Measurement and evaluation of surface contamination Part 1: General principles
BS EN ISO 17450-2:2012 Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
16/30334592 DC : 0 BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
I.S. EN 1793-5:2016 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
14/30297921 DC : 0 BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS
11/30253839 DC : 0 BS EN 60118-0 ED.3 - ELECTROACOUSTICS- HEARING AIDS - PART 0: MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS (AMALGAMATED REVISION OF IEC 60118-0, IEC 60118-1, IEC 60118-2, IEC 60118-6)
BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
16/30301971 DC : 0 BS ISO 1438 - HYDROMETRY - OPEN CHANNEL FLOW MEASUREMENT USING THIN-PLATE WEIRS
13/30286383 DC : 0 BS ISO 18589-3 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 3: MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES
17/30328201 DC : 0 BS ISO 13169 - WATER QUALITY - URANIUM - TEST METHOD USING ALPHA LIQUID SCINTILLATION COUNTING
BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments Optical spectrum analyzers
BS EN 61207-1:2010 Expression of performance of gas analyzers General
BS EN 60904-4:2009 Photovoltaic devices Reference solar devices. Procedures for establishing calibration traceability
14/30313972 DC : 0 BS EN 60645-1 ED.4.0 - ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY
API TR 2571 : 2011 FUEL GAS MEASUREMENT
DIN EN 15267-4:2015-08 (Draft) AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
ISO 20391-1:2018 Biotechnology — Cell counting — Part 1: General guidance on cell counting methods
14/30270415 DC : 0 BS ISO 362-3 - EASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD - PART 3: INDOOR TESTING M AND N CATEGORIES
BS ISO 15767:2009 Workplace atmospheres. Controlling and characterizing uncertainty in weighing collected aerosols
10/30203803 DC : 0 BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS
I.S. EN ISO 13943:2017 FIRE SAFETY - VOCABULARY (ISO 13943:2017)
DIN ISO 16063-16 E : 2015 METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH&#39;S GRAVITATION (ISO 16063-16:2014)
I.S. EN ISO 16610-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
PD CEN/TS 17021:2017 Stationary source emissions. Determination of the mass concentration of sulphur dioxide by instrumental techniques
DIN ISO 3567:2015-05 VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011)
16/30346580 DC : 0 BS EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS
16/30321526 DC : 0 BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES
I.S. EN ISO 13102:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
BS EN ISO 15193:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
BS EN ISO 16859-2:2015 Metallic materials. Leeb hardness test Verification and calibration of the testing devices
BS EN 61280-1-1:2013 Fibre optic communication subsystem basic test procedures Test procedures for general communication subsystems. Transmitter output optical power measurement for single-mode optical fibre cable
18/30368966 DC : 0 BS ISO 14701 - SURFACE CHEMICAL ANALYSIS - X-RAY PHOTOELECTRON SPECTROSCOPY - MEASUREMENT OF SILICON OXIDE THICKNESS
OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
S.R. CEN/TS 16272-5:2014 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance Capability of measurement processes
CEI EN 61788-12 : 2014 SUPERCONDUCTIVITY - PART 12: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO NON-COPPER VOLUME RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTING WIRES
15/30315820 DC : DRAFT JAN 2015 BS EN ISO 1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES
17/30357741 DC : 0 BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
DIN EN ISO 5167-5 E : 2016 MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016)
12/30263752 DC : 0 BS ISO 12154 - DETERMINATION OF DENSITY BY VOLUMETRIC DISPLACEMENT - SKELETON DENSITY BY GAS PYCNOMETRY
DIN EN ISO 25378:2011-12 Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011)
BS ISO 5-2:2009 Photography and graphic technology. Density measurements Geometric conditions for transmittance density
BS ISO 14385-2:2014 Stationary source emissions. Greenhouse gases Ongoing quality control of automated measuring systems
BS ISO 19361:2017 Measurement of radioactivity. Determination of beta emitters activities. Test method using liquid scintillation counting
DIN ISO 16000-3:2013-01 Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011)
BS ISO 27893:2011 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
IEC 61757:2018 Fibre optic sensors - Generic specification
16/30275393 DC : 0 BS ISO 532-2 - ACOUSTICS - METHODS FOR CALCULATING LOUDNESS - PART 2: MOORE-GLASBERG METHOD
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
14/30289271 DC : 0 BS EN 16211 - VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS
DIN EN ISO 12999-1:2014-09 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014)
12/30242633 DC : 0 BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS
BS ISO 2425:2010 Hydrometry. Measurement of liquid flow in open channels under tidal conditions
BS ISO 16966:2013 Nuclear energy. Nuclear fuel technology. Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors
UNE-EN ISO 148-1:2017 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
12/30244420 DC : 0 BS ISO 13304 - RADIOLOGICAL PROTECTION - MINIMUM CRITERIA FOR ELECTRON PARAMAGNETIC RESONANCE (EPR) SPECTROSCOPY FOR RETROSPECTIVE DOSIMETRY OF IONIZING RADIATION
BS EN 60794-1-20:2014 Optical fibre cables Generic specification. Basic optical cable test procedures. General and definitions
DIN EN 15841:2010-04 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
BS ISO/IEC 18047-6:2017 Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz
08/30177580 DC : DRAFT FEB 2008 BS EN 61260-1 - ELECTRO ACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS
BS EN ISO 11665-5:2015 Measurement of radioactivity in the environment. Air:radon-222 Continuous measurement method of the activity concentration
14/30283703 DC : 0 BS ISO 8769 - REFERENCE SOURCES - CALIBRATION OF SURFACE CONTAMINATION MONITORS - ALPHA-, BETA- AND PHOTON EMITTERS
IES LM 59 : 2000 ELECTRICAL AND PHOTOMETRIC MEASUREMENT OF LOW PRESSURE SODIUM LAMPS
15/30289813 DC : 0 BS EN ISO 4545-1 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD
DIN ISO 11040-4 E : 2017 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
BS EN 15852:2010 Ambient air quality. Standard method for the determination of total gaseous mercury
UNE-EN 50563:2012 External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes
BS ISO 13253:2017 Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance
BS ISO 12799:2015 Nuclear energy. Determination of nitrogen content in UO<sub>2</sub>, (U,Gd)O<sub>2</sub> and (U,Pu)O<sub>2</sub> sintered pellets. Inert gas extraction and conductivity detection method
BS ISO 9123:2017 Hydrometry. Stage-fall-discharge relationships
UNE-EN ISO 22476-5:2014 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
14/30250844 DC : 0 BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES
BS EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets Part 1: Introduction and roadmap for standardization
BS EN 15991:2015 Testing of ceramic and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV)
PD IEC/TS 62282-7-2:2014 Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
17/30302594 DC : 0 BS ISO 4869-6 - ACOUSTICS - HEARING PROTECTORS - PART 6: DETERMINATION OF SOUND ATTENUATION OF ACTIVE NOISE REDUCTION EARMUFFS
CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
14/30303599 DC : 0 BS EN ISO 19694-3 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY
15/30297373 DC : 0 BS EN ISO 4869-1 - ACOUSTICS - HEARING PROTECTORS - PART 1: SUBJECTIVE METHOD FOR THE ASUREMENT OF SOUND ATTENUATION
BS ISO 13472-2:2010 Acoustics. Measurement of sound absorption properties of road surfaces in situ Spot method for reflective surfaces
13/30294667 DC : 0 BS EN 61260-3 ED.1.0 - ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 3: PERIODIC TESTS
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines
DIN ISO 22309 E : 2015 MICROBEAM ANALYSIS - QUANTITATIVE ANALYSIS USING ENERGY-DISPERSIVE SPECTROMETRY (EDS) FOR ELEMENTS WITH AN ATOMIC NUMBER OF 11 (NA) OR ABOVE (ISO 22309:2011)
NF ISO 10704 : 2010 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND GROSS BETA ACTIVITY IN NON-SALINE WATER - THIN SOURCE DEPOSIT METHOD
DIN EN ISO 204 E : 2009 METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST
14/30295940 DC : 0 BS ISO/IEC 18046-4 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 4: TEST METHODS FOR PERFORMANCE OF RFID GATES IN LIBRARIES
NF EN ISO 9612 : 2009 ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
BS EN 61788-17:2013 Superconductivity Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
BS ISO 24173:2009 Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
BS ISO 16063-17:2016 Methods for the calibration of vibration and shock transducers Primary calibration by centrifuge
ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation
DIN EN ISO 6142-1:2015-12 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015)
BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters Primary calibration methods
EN 61724-1:2017 Photovoltaic system performance - Part 1: Monitoring
11/30240648 DC : 0 BS EN 60794-1-20 - OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS
DIN EN 14793:2017-05 STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD
ISO 5129:2001 Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight
BS ISO/IEC 18046-4:2015 Information technology. Radio frequency identification device performance test methods Test methods for performance of RFID gates in libraries
BS ISO 22007-6 : 2014 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
16/30334494 DC : 0 BS EN ISO 12354-1 - BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS
NF EN 50383 : 2010 BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ)
10/30203578 DC : 0 BS EN 61577-3 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS ON RADON DECAY PRODUCT MEASURING INSTRUMENTS
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 5151:2017 Non-ducted air conditioners and heat pumps. Testing and rating for performance
12/30231423 DC : 0 BS ISO 13163-1 - WATER QUALITY - LEAD 210 - PART 1: LIQUID SCINTILLATION COUNTING METHOD
BS EN 61000-4-6:2014 Electromagnetic compatibility (EMC) Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
DIN EN ISO 6789-1 E : 2017 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017)
PD CEN/TR 16469:2013 Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements
BS ISO 24095:2009 Workplace air. Guidance for the measurement of respirable crystalline silica
PD CEN/TS 16272-7:2015 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Extrinsic characteristics. In situ values of insertion loss
14/30230935 DC : 0 BS EN ISO 4126-11 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 11: PERFORMANCE TESTING
BS EN 16450:2017 Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
BS PD IEC TS 60076-19 : 2013 POWER TRANSFORMERS - PART 19: RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS
BS ISO 29473:2010 Fire tests. Uncertainty of measurements in fire tests
BS ISO/IEC 10373-6 : 2011 IDENTIFICATION CARDS - TEST METHODS - PART 6: PROXIMITY CARDS
OIML D 8 : 2004 MEASUREMENT STANDARDS. CHOICE, RECOGNITION, USE, CONSERVATION AND DOCUMENTATION
DIN EN 16450 E : 2017 AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5)
API TR 2572 : 2013 CARBON CONTENT, SAMPLING, AND CALCULATION
BS ISO 15112 : 2011 NATURAL GAS - ENERGY DETERMINATION
PD ISO/TR 12748:2015 Natural Gas. Wet gas flow measurement in natural gas operations
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
10/30212265 DC : 0 BS ISO 14701 - SURFACE CHEMICAL ANALYSIS - X-RAY PHOTOELECTRON SPECTROSCOPY - MEASUREMENT OF SILICON OXIDE THICKNESS
BS EN 61157 : 2007 STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT
BS ISO 16063-43:2015 Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification
CSA ISO/IEC TR 18047-4 : 2005 : R2015 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ
BS EN 61377:1997 Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control
11/30235530 DC : 0 BS ISO D 51276 - PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM
16/30337505 DC : 0 BS EN 60154-4 - FLANGES FOR WAVEGUIDES - PART 4: RELEVANT SPECIFICATIONS FOR FLANGES FOR CIRCULAR WAVEGUIDES
18/30334086 DC : DRAFT APR 2018 BS EN ISO 20896 - DENTISTRY - DIGITAL IMPRESSION DEVICES - METHODS FOR ASSESSING ACCURACY
BS ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles. Engineering method M and N categories
BS EN 16909:2017 Ambient air. Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters
I.S. EN ISO 20486:2018 NON-DESTRUCTIVE TESTING - LEAK TESTING - CALIBRATION OF REFERENCE LEAKS FOR GASES (ISO 20486:2017)
16/30344343 DC : 0 BS ISO/ASTM 51205 - PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM
S.R. CEN/TS 16645:2014 AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE
17/30349154 DC : 0 BS ISO 20146 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR CAPACITANCE DIAPHRAGM GAUGE
I.S. EN 16272-4:2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD
CAN/CSA-ISO/IEC 18046-1:13 (R2017) Information technology - Radio frequency identification device performance test methods - Part 1: Test methods for system performance (Adopted ISO/IEC 18046-1:2011, first edition, 2011-10-15)
BS ISO 16700:2004 Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
PD ISO/TS 19159-2:2016 Geographic information. Calibration and validation of remote sensing imagery sensors and data Lidar
BS EN 61215-1:2016 Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test requirements
ANSI S12.53/1 : 2011 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
NF ISO 11929 : 2010 DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE CONFIDENCE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION
17/30359986 DC : 0 BS EN ISO 7779 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
17/30341085 DC : 0 BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS
CSA ISO/IEC 18046-2 : 2013(R2017) INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
CEI EN 60469 : 2014 TRANSITIONS, PULSES AND RELATED WAVE FORMS - TERMS, DEFINITIONS AND ALGORITHMS
PD ISO/TR 18105:2014 Soil quality. Detection of water soluble chromium(VI) using a ready-to-use test-kit method
PD IEC/TS 62462:2017 Ultrasonics. Output test. Guidance for the maintenance of ultrasound physiotherapy systems
I.S. EN 62271-100:2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS
S.R. CEN/TR 16625:2013 FLEXIBLE SHEETS FOR WATERPROOFING - STATISTICAL DEFINITION OF MANUFACTURER&#39;S LIMITING VALUE AND DECLARED VALUE (MLV AND MDV) - 95% STATISTIC
CEI EN 61526 : 2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
PREN 14790 : DRAFT 2014 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD
CSA C61400-11 : 2007 WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
BS IEC 61577-3 : 2011 RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 3: SPECIFIC REQUIREMENTS FOR RADON DECAY PRODUCT MEASURING INSTRUMENTS
S.R. CEN/TR 16469:2013 HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS
CEI EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
I.S. EN ISO 20785-3:2017 DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 3: MEASUREMENTS AT AVIATION ALTITUDES (ISO 20785-3:2015)
ISO 7504:2015 Gas analysis Vocabulary
AAMI TIR 29:2012(R2017) GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES
IEC TR 61282-11:2012 Fibre optic communication system design guides - Part 11: Multimode launch conditions
BS EN ISO 9698:2015 Water quality. Determination of tritium activity concentration. Liquid scintillation counting method
CEI EN 62129-2 : 2012 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
DIN EN ISO 15112:2014-09 Natural gas - Energy determination (ISO 15112: 2011)
IEC 62577:2009 Evaluation of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 MHz - 40 GHz)
AAMI TIR 29:2012 GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES
IEC TS 62556:2014 Ultrasonics - Field characterization - Specification and measurement of field parameters for high intensity therapeutic ultrasound (HITU) transducers and systems
CEI EN 55017 : 2012 METHODS OF MEASUREMENT OF THE SUPPRESSION CHARACTERISTICS OF PASSIVE EMC FILTERING DEVICES
DIN EN ISO 16664:2016-07 (Draft) GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017)
EN ISO 10703:2015 Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007)
CSA ISO/IEC 10373-7 : 2009 : R2014 IDENTIFICATION CARDS - TEST METHODS - PART 7: VICINITY CARDS
I.S. EN ISO 12311:2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
IEC TS 62600-201:2015 Marine energy - Wave, tidal and other water current converters - Part 201: Tidal energy resource assessment and characterization
ISO 362-1:2015 Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories
CSA C22.2 No. 60601.2.5 : 2011 : R2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT
CEI EN 61786-1 : 2014 MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
IEC 62479:2010 Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
ISO 13253:2017 Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance
UNI EN ISO 15112 : 2014 NATURAL GAS - ENERGY DETERMINATION
I.S. EN ISO 204:2009 METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST
IEC TS 62600-100:2012 Marine energy - Wave, tidal and other water current converters - Part 100: Electricity producing wave energy converters - Power performance assessment
CISPR TR 16-4-5:2006+AMD1:2014 CSV Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods
ISO 532-2:2017 Acoustics — Methods for calculating loudness — Part 2: Moore-Glasberg method
UNE-EN 15841:2010 Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
I.S. EN ISO 11665-3:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 3: SPOT MEASUREMENT METHOD OF THE POTENTIAL ALPHA ENERGY CONCENTRATION OF ITS SHORT-LIVED DECAY PRODUCTS (ISO 11665-3:2012)
ISO/TS 11665-13:2017 Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method
UNE 199072-2:2017 Road traffic management equipment. Air monitoring stations on roads. Part 2: Application protocol
BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
UNE-EN 60645-7:2010 Electroacoustics - Audiometric equipment -- Part 7: Instruments for the measurement of auditory brainstem responses
BS EN ISO 13943:2017 Fire safety. Vocabulary
I.S. EN 62129-2:2011 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
BS EN ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method
I.S. EN 62129-1:2016 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 1: OPTICAL SPECTRUM ANALYZERS
ISO/TR 14294:2011 Workplace atmospheres Measurement of dermal exposure Principles and methods
CSA Z24511 : 2010 : R2014 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES
ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
UNE-EN ISO 13199:2013 Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012)
UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
I.S. EN ISO 389-9:2009 ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS
I.S. EN IEC 60942:2018 ELECTROACOUSTICS - SOUND CALIBRATORS
I.S. EN 12102:2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
ISO/TS 17822-1:2014 In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions
I.S. EN 62127-1:2007 ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-1:2007 (EQV))
BIS IS 14976 : 2012 CALIBRATION OF FIBRE-OPTIC POWER METERS
I.S. EN 62585:2012 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012 (EQV))
BS EN 62209-2:2010 Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
ISO 16000-3:2011 Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
I.S. EN ISO 22007-4:2017 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
UNE-EN 15267-4:2018 Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 60645-6:2010 ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 6: INSTRUMENTS FOR THE MEASUREMENT OF OTOACOUSTIC EMISSIONS
ANSI/ASA S12.54/ISO 3744 : 2011(R2016) ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
I.S. EN ISO 22476-5:2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012)
I.S. EN 19694-3:2016 STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY
EN ISO 13160:2015 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012)
I.S. EN 62321-1:2013 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW (IEC 62321-1:2013 (EQV))
I.S. EN ISO 25378:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS
I.S. EN ISO 14064-1:2012 GREENHOUSE GASES - PART 1: SPECIFICATION WITH GUIDANCE AT THE ORGANIZATION LEVEL FOR QUANTIFICATION AND REPORTING OF GREENHOUSE GAS EMISSIONS AND REMOVALS (ISO 14064-1:2006)
NF EN ISO 3611 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN 1793-4:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION
I.S. EN ISO 11665-1:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS (ISO 11665-1:2012)
I.S. EN ISO 13385-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN ISO 22007-3:2012 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008)
I.S. EN 1793-6:2012 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
I.S. EN ISO 16638-1:2017 RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS (ISO 16638-1:2015)
ISO 20456:2017 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO 20906 : 2009 ACOUSTICS - UNATTENDED MONITORING OF AIRCRAFT SOUND IN THE VICINITY OF AIRPORTS
UNE-EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
BS EN 1793-2:2012 Road traffic noise reducing devices. Test method for determining the acoustic performance Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
I.S. EN ISO 13473-5:2009 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 5: DETERMINATION OF MEGATEXTURE
ISO 3743-2:2018 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms
API MPMS CHAPTER 20.3 : 2013(R2018) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 20: ALLOCATION MEASUREMENT - SECTION 3: MEASUREMENT OF MULTIPLE FLOW
ASTM D 6552 : 2006 : R2016 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation Fundamentals and application
I.S. EN 15980:2011 AIR QUALITY - DETERMINATION OF THE DEPOSITION OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, BENZO[A]PYRENE, DIBENZ[A,H]ANTHRACENE AND INDENO[1,2,3-CD]PYRENE
ISO 13472-2:2010 Acoustics Measurement of sound absorption properties of road surfaces in situ Part 2: Spot method for reflective surfaces
ISO 7503-3:2016 Measurement of radioactivity Measurement and evaluation of surface contamination Part 3: Apparatus calibration
ISO/IEC 17007:2009 Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment
ECA 10-14 : 2011 GUIDELINES ON THE CALIBRATION OF STATIC TORQUE MEASURING DEVICES
EN ISO 9697:2017 Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015)
ISO 12183:2016 Nuclear fuel technology — Controlled-potential coulometric assay of plutonium
EN IEC 60068-3-6:2018/AC:2018-05 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018)
ISO 16063-21:2003 Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer
UNI EN ISO 6145-7 : 2011 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS
CEI EN 61788-17 : 2013 SUPERCONDUCTIVITY - PART 17: ELECTRONIC CHARACTERISTIC MEASUREMENTS - LOCAL CRITICAL CURRENT DENSITY AND ITS DISTRIBUTION IN LARGE-AREA SUPERCONDUCTING FILMS
DIN EN 16523-2 E : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
I.S. EN ISO 11554:2017 OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS (ISO 11554:2017)
S.R. CEN/TR 16988:2016 ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST
ISO 12963:2017 Gas analysis — Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
ISO 19703:2010 Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
ISO 6416:2017 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
PREN ISO 15189 : DRAFT 2011 MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE
ISO 13164-4:2015 Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting
PREN 15058 : DRAFT 2014 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY
I.S. EN ISO 11665-6:2015 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 6: SPOT MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION (ISO 11665-6:2012)
UNI EN ISO 25378 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS
ISO/TS 27893:2009 Vacuum technology Vacuum gauges Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
UNI EN ISO 14720-2 : 2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP/OES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW
ISO 13304-1:2013 Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles
CSA ISO/IEC 10373-6 : 2018 IDENTIFICATION CARDS - TEST METHODS - PART 6: PROXIMITY CARDS
I.S. EN ISO 6145-5:2010 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 5: CAPILLARY CALIBRATION DEVICES
ANSI S12.64-1 : 2009 QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS
ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
BS EN ISO 19017:2017 Guidance for gamma spectrometry measurement of radioactive waste
I.S. EN 61746-1:2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
I.S. EN 60794-1-20:2014 OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS
ONORM EN ISO 17201-3 : 2010 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS
DIN EN ISO 9698:2015-12 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010)
I.S. EN 60154-2:2016 FLANGES FOR WAVEGUIDES - PART 2: RELEVANT SPECIFICATIONS FOR FLANGES FOR ORDINARY RECTANGULAR WAVEGUIDES
I.S. EN 55017:2011 METHODS OF MEASUREMENT OF THE SUPPRESSION CHARACTERISTICS OF PASSIVE EMC FILTERING DEVICES (CISPR 17:2011 (EQV))
BIS IS 16179-1 : 2014 STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES
IEC 62522:2014 Calibration of tuneable laser sources
EN 16523-2:2015 Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact
I.S. EN 61215-1:2016 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 1: TEST REQUIREMENTS
UNE-EN ISO 20785-3:2018 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2015)
BS EN 60318-1:2009 Electroacoustics. Simulators of human head and ear Ear simulator for the measurement of supra-aural and circumaural earphones
CEI EN 61724-1 : 1ED 2017 PHOTOVOLTAIC SYSTEM PERFORMANCE - PART 1: MONITORING
IEC 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets
UNE-EN ISO 18113-1:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
ISO 17208-1:2016 Underwater acoustics Quantities and procedures for description and measurement of underwater sound from ships Part 1: Requirements for precision measurements in deep water used for comparison purposes
UNE 206012:2017 General characterization of the thermal energy storage systems for solar thermal power plants with parabolic trough collector technology
I.S. EN ISO 148-3:2016 METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016)
I.S. EN 61788-15:2011 SUPERCONDUCTIVITY - PART 15: ELECTRONIC CHARACTERISTIC MEASUREMENTS - INTRINSIC SURFACE IMPEDANCE OF SUPERCONDUCTOR FILMS AT MICROWAVE FREQUENCIES (IEC 61788-15:2011 (EQV))
CEI EN 61788-18 : 2014 SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
ISO 26303:2012 Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools
BS EN ISO 6506-2:2014 Metallic materials. Brinell hardness test Verification and calibration of testing machines
NF EN ISO 14253-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
UNI EN ISO 389-9 : 2009 ACOUSTICS - REFERENCE ZERO FOR THE CALIBRATION OF AUDIOMETRIC EQUIPMENT - PART 9: PREFERRED TEST CONDITIONS FOR THE DETERMINATION OF REFERENCE HEARING THRESHOLD LEVELS
NF EN ISO 13385-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPER - DESIGN AND METROLOGICAL CHARACTERISTICS
PREN 61577-2 : DRAFT 2017 RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS (IEC 61577-2:2014, MODIFIED)
UNI EN ISO 13102 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS
OIML D 28 : 2004 CONVENTIONAL VALUE OF THE RESULT OF WEIGHING IN AIR
UNE-EN 16012:2013 Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance
UNI EN ISO 14720-1 : 2013 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS
NF EN 61400-12-1:2017 WIND ENERGY GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENTS OF ELECTRICITY PRODUCING WIND TURBINES
NF EN 62129-2 : 2011 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
I.S. EN ISO 9612:2009 ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD
ASTM E 3063 : 2017 : REDLINE Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
I.S. EN ISO 15193:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
DIN EN ISO 7500-1:2016-05 METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015)
EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
ISO/IEC 18047-6:2017 Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
EN ISO 12354-1:2017 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017)
DIN EN ISO 14253-1:2013-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013)
IEC 60462:2010 Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures
I.S. EN 60794-1-2:2017 OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 19238:2014 Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics
I.S. EN 61672-3:2013 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS
EN ISO 16610-61:2015 Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
IEC TR 62617:2015 Home laundry appliances - Uncertainty reporting of measurements
IEC TS 62600-200:2013 Marine energy - Wave, tidal and other water current converters - Part 200: Electricity producing tidal energy converters - Power performance assessment
ISO 8196-1:2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 1: Analytical attributes of alternative methods
I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
IEC 62220-1-1:2015 Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging
IEC 61526:2010 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
IEC 62489-1:2010+AMD1:2014+AMD2:2017 CSV Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components
DIN EN 13201-4:2016-06 ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE
DIN EN ISO 14577-2:2015-11 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015)
DIN EN ISO 8253-3 E : 2012 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012)
DIN EN ISO 14577-1:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015
DIN EN ISO 22674:2016-09 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016)
DIN EN 1793-1:2015-06 (Draft) ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
DIN EN ISO 14577-4:2015-05 (Draft) METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016)
DIN EN 14662-3:2016-02 AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY
DIN EN ISO 9513:2013-05 Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013)
DIN EN 16242:2013-03 CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
DIN EN 14789:2006-04 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
DIN EN ISO 6974-1:2012-11 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
DIN EN 13771-2:2016-11 (Draft) COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS
DIN EN ISO 6974-2:2012-11 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
UNE-EN ISO 6508-1:2017 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
UNE-EN ISO 6506-1:2015 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
DIN EN ISO 20743:2013-12 Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013)
ISO 16000-15:2008 Indoor air — Part 15: Sampling strategy for nitrogen dioxide (NO2)
UNE-EN 61094-5:2017 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
IEC 60469:2013 Transitions, pulses and related waveforms - Terms, definitions and algorithms
ISO 80000-1:2009 Quantities and units — Part 1: General
BS EN ISO 14532:2017 Natural gas. Vocabulary
IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
BS EN 14154-3 : 2005 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
ISO 6789-1:2017 Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance
ISO 25178-70:2014 Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures
IEC 60318-1:2009 Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones
ISO 13225:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics
BS EN ISO 20743:2013 Textiles. Determination of antibacterial activity of textile products
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
BS EN 14792:2017 Stationary source emissions. Determination of mass concentration of nitrogen oxides. Standard reference method. Chemiluminescence
BS EN ISO 15212-2:2002 Oscillation-type density meters Process instruments for homogeneous liquids
BS EN ISO 3744:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
UNE-ISO 26303:2013 Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools
BS EN ISO 5436-2:2012 Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards
DIN EN ISO 8253-3:2012-08 Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012)
ONORM EN ISO 13385-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011)
EN ISO 13161:2015 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011)
ECMA 275 : 3ED 2015 MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES
I.S. EN 1267:2012 INDUSTRIAL VALVES - TEST OF FLOW RESISTANCE USING WATER AS TEST FLUID
I.S. EN ISO 6974-1:2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012)
I.S. EN ISO 8253-3:2012 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 3: SPEECH AUDIOMETRY (ISO 8253-3:2012)
I.S. EN 482:2012 WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS
I.S. EN 14792:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE
I.S. EN ISO 10723:2012 NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012)
I.S. EN 14791:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD
I.S. EN ISO 2178:2016 NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016)
I.S. EN 14789:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM
I.S. EN ISO 3747:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
I.S. EN ISO 10846-1:2008 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES
I.S. EN ISO 772:2011 HYDROMETRY - VOCABULARY AND SYMBOLS
I.S. EN ISO 3743-1:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
I.S. EN ISO 6926:2016 ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
I.S. EN 13804:2013 FOODSTUFFS - DETERMINATION OF ELEMENTS AND THEIR CHEMICAL SPECIES - GENERAL CONSIDERATIONS AND SPECIFIC REQUIREMENTS
I.S. EN ISO 6506-1:2014 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014)
DIN EN ISO 11200:1996-07 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN ISO 11204:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 3745:2012 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012)
ASHRAE GUIDELINE 14 : 2014 MEASUREMENT OF ENERGY, DEMAND, AND WATER SAVINGS
DIN EN 1776:2016-05 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
I.S. EN ISO 6974-2:2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012)
DIN EN ISO 10723:2013-04 NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012)
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 60942:2017 RLV Electroacoustics - Sound calibrators
I.S. EN ISO 15011-1:2009 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS
I.S. EN ISO 3741:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
I.S. EN 14790:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD
I.S. EN ISO 19901-5:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 5: WEIGHT CONTROL DURING ENGINEERING AND CONSTRUCTION (ISO 19901-5:2016)
I.S. EN ISO 10846-2:2008 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
I.S. EN ISO 8253-1:2010 ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: PURE-TONE AIR AND BONE CONDUCTION AUDIOMETRY
I.S. EN 16242:2012 CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
I.S. EN ISO 1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES (ISO 1:2016)
DIN EN ISO 15011-1:2010-03 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)
I.S. EN ISO 6976:2016 NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016)
EN ISO 6926:2016 Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
I.S. EN ISO 8311:2013 REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - CALIBRATION OF MEMBRANE TANKS AND INDEPENDENT PRISMATIC TANKS IN SHIPS - MANUAL AND INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHODS (ISO 8311:2013)
I.S. EN ISO 15011-3:2009 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 3: DETERMINATION OF OZONE EMISSION RATE DURING ARC WELDING
I.S. EN ISO 4074:2015 NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015)
I.S. EN ISO 3744:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
I.S. EN ISO 9513:2012 METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012)
I.S. EN 15058:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY
I.S. EN ISO 14532:2017 NATURAL GAS - VOCABULARY (ISO 14532:2014)
I.S. EN ISO 6974-5:2014 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 5: ISOTHERMAL METHOD FOR NITROGEN, CARBON DIOXIDE, C[1] TO C[5] HYDROCARBONS AND C[6+] HYDROCARBONS (ISO 6974-5:2014)
I.S. EN 13771-2:2017 COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS
I.S. EN ISO 5436-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
I.S. EN ISO 14577-4:2016 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016)
I.S. EN 13201-4:2015 ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE
DIN EN ISO 6506-2:2015-02 METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014)
I.S. EN 1793-1:2017 ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 1: INTRINSIC CHARACTERISTICS OF SOUND ABSORPTION UNDER DIFFUSE SOUND FIELD CONDITIONS
I.S. EN ISO 14577-3:2015 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015)
CEI EN 61000-4-20 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
I.S. EN 1811:2011 REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM ALL POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND ARTICLES INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN
I.S. EN ISO 6508-1:2016 METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6508-1:2016)
I.S. EN 1776:2015 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
DIN EN ISO 16000-15:2009-04 INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2])
DIN EN 1811:2015-10 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin (includes Amendment A1:2015)
EN 61094-3:2016/AC:2017-01 ELECTROACOUSTICS - MEASUREMENT MICROPHONES - PART 3: PRIMARY METHOD FOR FREE-FIELD CALIBRATION OF LABORATORY STANDARD MICROPHONES BY THE RECIPROCITY TECHNIQUE
I.S. EN ISO 10882-1:2011 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR&#39;S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES (ISO 10882-1:2011)
I.S. EN 14181:2014 STATIONARY SOURCE EMISSIONS - QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS
EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
I.S. EN ISO 14577-1:2015 METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD (ISO 14577-1:2015)
I.S. EN ISO 11202:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
I.S. EN 14662-3:2015 AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY
I.S. EN ISO 11201:2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 3746:2010 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
I.S. EN ISO 22674:2016 DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016)
OVE/ONORM EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012)
EN 60794-1-2:2017/AC:2017-07 OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017)
UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
DIN EN 16909:2017-06 AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS
ASME B89.7.3.3 : 2002 : R2007 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
VDI/VDE 2631-10 : 2014 COR 2015 FORM MEASUREMENT - DETERMINATION OF THE UNCERTAINTY OF FORM MEASUREMENTS
VDI 2048 Blatt 1:2000-10 Uncertainties of measurements at acceptance tests for energy conversion and power plants - Fundamentals
ASME B89.1.6 : 2002 : R2012 MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES
VDI/VDE/DGQ/DKD 2622 Blatt 2:2015-08 Calibration of measuring equipment for electrical quantities - Methods for the determination of the uncertainty of measurement
VDI/VDE 3519 Blatt 1:2002-10 Level measurement of liquids and solids (bulk solids)
ASME B89.7.3.3:2002 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
VDI 3766:2012-09 Ultrasound - Workplace - Measurement, assessment, judgement and reduction
ASME B5.57 : 2012 METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS
VDI 3794 Blatt 2:2013-07 Determination of depositon fluxes of ambient air pollutants - Determination of the deposition flux of ammonia and ammonium compounds by means of the IRMA method
ASME B5.57 : 2012 : R2017 METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS
VDI/VDE 2630 Blatt 2.1:2015-06 Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors
VDI 2878 Blatt 4:2016-05 Application of thermography to maintenance diagnostics - Equipment technology
VDI 3431:2016-08 Bending of profiles - Testing notes for profile bending elements
ASME B89.7.3.3 : 2002 : R2012 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
ASME B89.1.6 : 2002 : R2007 MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES
ASME B89.7.3.3 : 2002 : R2017 GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS
ASME B89.1.6 : 2002 MEASUREMENT OF PLAIN INTERNAL DIAMETERS FOR USE AS A MASTER RINGS OR RING GAGES
BS EN 62321-1:2013 Determination of certain substances in electrotechnical products Introduction and overview
UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
UNE-EN 16211:2016 Ventilation for buildings - Measurement of air flows on site - Methods
IES LM 79 FRENCH : 2008 ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS
I.S. EN ISO 10703:2015 WATER QUALITY - DETERMINATION OF THE ACTIVITY CONCENTRATION OF RADIONUCLIDES - METHOD BY HIGH RESOLUTION GAMMA-RAY SPECTROMETRY (ISO 10703:2007)
UNE-EN 61400-11:2013 Wind turbines - Part 11: Acoustic noise measurement techniques
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
CEI EN 62040-3 : 2015 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
I.S. EN ISO 6145-7:2010 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 7: THERMAL MASS-FLOW CONTROLLERS
CEI EN 61260-2 : 2017 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS
DIN ISO 17123-1:2016-02 (Draft) OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY (ISO 17123-1:2014)
I.S. EN 16909:2017 AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS
BS EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement
IEC TS 62607-3-2:2017 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
DIN ISO 13165-1 E : 2015 WATER QUALITY - RADIUM-226 - PART 1: TEST METHOD USING LIQUID SCINTILLATION COUNTING (ISO 13165-1:2013)
DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
15/30317142 DC : 0 BS EN ISO 15011-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 1: DETERMINATION OF FUME EMISSION RATE DURING ARC WELDING AND COLLECTION OF FUME FOR ANALYSIS
10/30094845 DC : 0 BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS
17/30346182 DC : 0 BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES
ISO 16638-1:2015 Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds
ECA ILAC P14 : 2013 ILAC POLICY FOR UNCERTAINTY IN CALIBRATION
I.S. EN 61157:2007 STANDARD MEANS FOR THE REPORTING OF THE ACOUSTIC OUTPUT OF MEDICAL DIAGNOSTIC ULTRASONIC EQUIPMENT (IEC 61157:2007 (EQV))
BS EN 61260-3:2016 Electroacoustics. Octave-band and fractional-octave-band filters Periodic tests
DIN EN ISO 29661 : 2018 COR 1 2018 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015)
DIN EN 16909 E : 2017 AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS
BS EN ISO 13161:2015 Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry
BS EN ISO 11704:2015 Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method
DIN EN ISO 22007-6:2015-05 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
ISO 20581:2016 Workplace air General requirements for the performance of procedures for the measurement of chemical agents
BS EN 61788-19:2014 Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb<sub>3</sub>Sn composite superconductors
BS EN ISO 15112:2014 Natural gas. Energy determination
13/30275372 DC : 0 BS ISO 13164-4 - WATER QUALITY - RADON-222 - PART 4: TEST METHOD USING TWO-PHASE LIQUID SCINTILLATION COUNTING
ISO/TR 12748:2015 Natural Gas Wet gas flow measurement in natural gas operations
DKD-R 3-1-3 : 2003 KALIBRIERUNG VON BESCHLEUNIGUNGSMESSGERAETEN NACH DEM VERGLEICHSVERFAHREN - TEIL 3: SINUS- UND MULTISINUS-ANREGUNG
16/30339681 DC : 0 BS ISO 19685 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR PIRANI GAUGES
DIN EN ISO 22007-4:2016-10 (Draft) PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
BS EN ISO 27971:2015 Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
ECA 10-10 : 2012 DETERMINATION OF PITCH DIAMETER OF PARALLEL THREAD GAUGES BY MECHANICAL PROBING
UNI EN ISO 16000-15 : 2008 INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2])
11/30244161 DC : 0 BS EN 50400:2006/FPRAA - BASIC STANDARD TO DEMONSTRATE THE COMPLIANCE OF FIXED EQUIPMENT FOR RADIO TRANSMISSION (110 MHZ - 40 GHZ) INTENDED FOR USE IN WIRELESS TELECOMMUNICATION NETWORKS WITH THE BASIC RESTRICTIONS OR THE REFERENCE LEVELS RELATED TO GENERAL PUBLIC EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, WHEN PUT INTO SERVICE
BS EN 15841:2009 Ambient air quality. Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition
DIN ISO 362-2:2010-05 Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009)
BS ISO 13160 : 2012 WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING
BS ISO 11665-4:2012 Measurement of radioactivity in the environment. Air: radon-222 Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique
PD ISO/TR 14069:2013 Greenhouse gases. Quantification and reporting of greenhouse gas emissions for organizations. Guidance for the application of ISO 14064-1
ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
BS ISO 19467:2017 Thermal performance of windows and doors. Determination of solar heat gain coefficient using solar simulator
16/30326493 DC : 0 BS EN ISO 14644-3 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS
DIN EN ISO 9698 E : 2015 WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010)
DIN EN ISO 12354-1:2016-03 (Draft) BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017)
DIN EN ISO 16859-2:2016-02 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015)
DIN EN ISO 148-2:2015-09 (Draft) METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TESTING MACHINES (ISO 148-2:2016)
BS EN 55016-1-6 : 2015 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION
BS ISO 10523 : 2008 WATER QUALITY - DETERMINATION OF PH
12/30248587 DC : 0 BS ISO 14577-1 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD
DIN EN ISO 389-9:2009-12 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
DD ISO/TS 15530-4:2008 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation
BS EN ISO 25378:2011 Geometrical product specifications (GPS). Characteristics and conditions. Definitions
BS EN 61094-5:2002 Measurement microphones Methods for pressure calibration of working standard microphones by comparison
BS ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing
ISO/IEC TR 18047-2:2006 Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz
DIN EN ISO 12354-1 E : 2017 BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDINGS FROM THE PERFORMANCE OF ELEMENTS - PART 1: AIRBORNE SOUND INSULATION BETWEEN ROOMS (ISO 12354-1:2017)
BS ISO 13164-1:2013 Water quality. Radon-222 General principles
DIN EN ISO 11704 E : 2015 WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010)
ECA EURAMET CG-22 : 2017 GUIDELINES ON THE CALIBRATION OF AUTOCOLLIMATORS
PD CEN/TS 13649:2014 Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption
10/30186199 DC : 0 BS ISO 11665-6 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 6: RADON-222: METHODS FOR ESTIMATION OF SURFACE EXHALATION RATE BY ACCUMULATION METHOD IN THE ENVIRONMENT
15/30333610 DC : 0 BS EN ISO 11819-2.2 - ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD
CISPR 16-4-2:2011+AMD1:2014 CSV Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
CEI EN 61788-15 : 2012 SUPERCONDUCTIVITY - PART 15: ELECTRONIC CHARACTERISTIC MEASUREMENTS - INTRINSIC SURFACE IMPEDANCE OF SUPERCONDUCTOR FILMS AT MICROWAVE FREQUENCIES
10/30186187 DC : 0 BS ISO 11665-2 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 2: RADON-222: INTEGRATED MEASUREMENT METHOD FOR THE DETERMINATION OF THE AVERAGE POTENTIAL ALPHA ENERGY CONCENTRATION OF SHORT-LIVED RADON DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT
BS ISO 11358-3:2013 Plastics. Thermogravimetry (TG) of polymers Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
15/30312397 DC : 0 BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST)
09/30118717 DC : DRAFT OCT 2009 BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS
BS ISO 16110-2:2010 Hydrogen generators using fuel processing technologies Test methods for performance
BS EN 60601-2-8 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-8: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF THERAPEUTIC X-RAY EQUIPMENT OPERATING IN THE RANGE 10 KV TO 1 MV
ISO 24115:2012 Green coffee — Procedure for calibration of moisture meters — Routine method
10/30209057 DC : 0 BS ISO 16000-6 - INDOOR AIR - PART 6: DETERMINATION OF VOLATILE ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER AIR BY ACTIVE SAMPLING ON TENAX TA SORBENT, THERMAL DESORPTION AND GAS CHROMATOGRAPHY USING MS/FID
UNE-EN ISO 17034:2017 General requirements for the competence of reference material producers (ISO 17034:2016)
BS ISO 18589-7 : 2013 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 7: IN SITU MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES
ISO 19214:2017 Microbeam analysis — Analytical electron microscopy — Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards
PD CEN/TR 16625:2013 Flexible sheets for waterproofing. Statistical definition of manufacturer\'s limiting value and declared value (MLV and MDV). 95 % Statistic
I.S. EN 15852:2010 AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY
13/30285160 DC : 0 BS EN ISO 18674 - GEOTECHNICAL INVESTIGATION AND TESTING - GEOTECHNICAL MONITORING BY FIELD INSTRUMENTATION - GENERAL RULES
DIN EN ISO 16610-85 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
BS IEC 60747-14-4:2011 Semiconductor devices. Discrete devices Semiconductor accelerometers
BS EN 60601-2-62:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
I.S. EN ISO 3611:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
BS EN ISO 4064-2:2017 Water meters for cold potable water and hot water Test methods
NF EN ISO 17201-3 : 2010 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 3: GUIDELINES FOR SOUND PROPAGATION CALCULATIONS
BS ISO 10302-1:2011 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne noise measurement
15/30289059 DC : 0 BS ISO 17179 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF AMMONIA IN FLUE GAS - PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING SYSTEMS
PD CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
UNE-ISO 230-1:2014 Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement Correction for temperature when testing with the CPX method
BS EN ISO 9612:2009 Acoustics. Determination of occupational noise exposure. Engineering method
BS ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application
I.S. EN 60404-15:2012 MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS
BS EN 60645-1:2017 Electroacoustics. Audiometric equipment Equipment for pure-tone and speech audiometry
BS EN 16682:2017 Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
14/30282337 DC : 0 BS ISO 17123-8 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 8: GNSS FIELD MEASUREMENT SYSTEMS IN REAL-TIME KINEMATIC (RTK)
13/30214530 DC : 0 BS ISO 14385-1 - STATIONARY SOURCE EMISSIONS - GREEN HOUSE GASES - PART 1: CALIBRATION OF AUTOMATED MEASURING SYSTEMS
EN 1793-6:2012 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
ISO 19229:2015 Gas analysis Purity analysis and the treatment of purity data
DIN EN ISO 15112 E : 2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
UNE-EN 60794-1-20:2014 Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions
BS 70000:2017 Medical physics, clinical engineering and associated scientific services in healthcare. Requirements for quality, safety and competence
I.S. EN IEC 60068-3-6:2018 COR 2018 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018)
ISO 8124-5:2015 Safety of toys — Part 5: Determination of total concentration of certain elements in toys
BS ISO 13167:2015 Water quality. Plutonium, americium, curium and neptunium. Test method using alpha spectrometry
14/30301018 DC : 0 BS EN 61094-5 ED 2.0 - MEASUREMENT MICROPHONES - PART 5: METHODS FOR PRESSURE CALIBRATION OF WORKING STANDARD MICROPHONES BY COMPARISON
BS ISO 28057 : 2014 DOSIMETRY WITH SOLID THERMOLUMINESCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY
UNE-EN ISO 13160:2016 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012)
12/30242242 DC : 0 BS ISO 18589-7 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 7: IN SITU MEASUREMENT OF GAMMA-EMITTING RADIONUCLIDES
BS ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry. Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
14/30313008 DC : 0 BS ISO 16063-43 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 43: CALIBRATION OF ACCELEROMETERS BY MODEL-BASED PARAMETER IDENTIFICATION
IEC 60404-6:2018 REDLINE MAGNETIC MATERIALS - PART 6: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF MAGNETICALLY SOFT METALLIC AND POWDER MATERIALS AT FREQUENCIES IN THE RANGE 20 HZ TO 100 KHZ BY THE USE OF RING SPECIMENS
BS EN 60500:2017 Underwater acoustics. Hydrophones. Properties of hydrophones in the frequency range 1 Hz to 500 kHz
UNI EN ISO 12999-1 : 2014 ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION
13/30282207 DC : 0 BS EN 13032-4 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA - PART 4: LED LAMPS, MODULES AND LUMINAIRES
ISO 22309:2011 Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
11/30196205 DC : 0 BS ISO 2469 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE RADIANCE FACTOR (DIFFUSE REFLECTANCE FACTOR)
10/30205316 DC : 0 BS EN 61400-11 - WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN 60469:2013 Transitions, pulses and related waveforms. Terms, definitions and algorithms
I.S. EN ISO 9295:2015 ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT (ISO 9295:2015)
BS EN 15267-4:2017 Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources
BS EN ISO 6892-1:2016 Metallic materials. Tensile testing Method of test at room temperature
UNI EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
UNI CEI EN ISO 4064-2 : 2014 WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS
12/30228759 DC : DRAFT JAN 2012 BS ISO 13164-1 - WATER QUALITY - MEASUREMENT OF THE ACTIVITY CONCENTRATION OF RADON-222 - PART 1: GENERAL PRINCIPLES
BS ISO 20581:2016 Workplace air. General requirements for the performance of procedures for the measurement of chemical agents
I.S. EN 16523-2:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
CAN/CSA-ISO/IEC 18046-4:16 Information technology Radio frequency identification device performance test methods Part 4: Test methods for performance of RFID gates in libraries (Adopted ISO/IEC 18046-4:2015, first edition, 2015-12-15)
EN ISO 9698:2015 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010)
14/30296484 DC : 0 BS EN 1793-5 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 5: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND REFLECTION UNDER DIRECT SOUND FIELD CONDITIONS
IEC 60404-10 REDLINE : 2ED 2016 MAGNETIC MATERIALS - PART 10: METHODS OF MEASUREMENT OF MAGNETIC PROPERTIES OF ELECTRICAL STEEL STRIP AND SHEET AT MEDIUM FREQUENCIES
ECMA 109 : 7ED 2016 DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
12/30257199 DC : 0 BS ISO/IEC 18046-3 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 3: TEST METHODS FOR TAG PERFORMANCE
13/30277798 DC : 0 BS EN ISO 17892-2 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 2: DETERMINATION OF DENSITY OF FINE-GRAINED SOIL (CONVERSION OF CEN ISO TS 17892-2 INTO EN)
UNE-EN ISO 13162:2016 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method (ISO 13162:2011)
BS EN 61788-11:2011 Superconductivity Residual resistance ratio measurement. Residual resistance ratio of Nb<sub>3</sub>Sn composite superconductors
ISO 19361:2017 Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting
IEEE 1309-2013 REDLINE IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
10/30186196 DC : 0 BS ISO 11665-5 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 5: RADON-222: CONTINUOUS MEASUREMENT METHODS OF RADON ACTIVITY CONCENTRATION IN THE ATMOSPHERIC ENVIRONMENT
DIN EN 16272-6 E : 2014 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
NF EN 60645-7 : 2010 ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 7: INSTRUMENTS FOR THE MEASUREMENT OF AUDITORY BRAINSTEM RESPONSES
DD ISO/TS 28037:2010 Determination and use of straight-line calibration functions
11/30148484 DC : 0 BS EN ISO 9513 - METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING
11/30215957 DC : 0 BS ISO 4377 - HYDROMETRIC DETERMINATIONS - FLOW MEASUREMENT IN OPEN CHANNELS USING STRUCTURES - FLAT-V WEIRS
10/30215694 DC : 0 BS ISO 18132-3 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 3: AUTOMATIC TANK GAUGES FOR LIQUEFIED PETROLEUM AND CHEMICAL GASES ON BOARD MARINE CARRIERS AND FLOATING STORAGE
14/30315832 DC : 0 BS ISO/ASTM 52303 - GUIDE FOR ABSORBED-DOSE MAPPING IN RADIATION PROCESSING FACILITIES
ASTM E 2919 : 2014 : REDLINE Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose
BS EN 61788-5:2013 Superconductivity Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
17/30327513 DC : DRAFT APR 2017 BS EN ISO 11990 - LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBE SHAFT AND TRACHEAL CUFFS
ISO 20785-1:2012 Dosimetry for exposures to cosmic radiation in civilian aircraft Part 1: Conceptual basis for measurements
ISO 13166:2014 Water quality Uranium isotopes Test method using alpha-spectrometry
16/30319120 DC : 0 BS ISO 20263 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - DETERMINATION METHOD FOR INTERFACE POSITION IN THE CROSS-SECTIONAL IMAGE OF THE LAYERED MATERIALS
BS EN 60154-4:2017 Flanges for waveguides Relevant specifications for flanges for circular waveguides
BS EN 15842:2010 Foodstuffs. Detection of food allergens. General considerations and validation of methods
15/30330450 DC : 0 BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
DIN EN ISO 25178-70:2014-06 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
BS ISO 24496:2017 Office furniture. Office chairs. Methods for the determination of dimensions
UNI ISO 11843-6 : 2014 CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS
DIN EN ISO 16610-22 E : 2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
DIN EN ISO 16859-1:2016-02 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015)
UNI EN ISO 15530-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS
BS ISO 18937:2014 Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability
ISO 24173:2009 Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction
BS EN 60318-4:2010 Electroacoustics. Simulators of human head and ear Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
DIN EN ISO 16610-21 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments
PD IEC/TR 61000-1-6:2012 Electromagnetic compatibility (EMC) General. Guide to the assessment of measurement uncertainty
BS ISO 362-2:2009 Measurement of noise emitted by accelerating road vehicles. Engineering method L category
BIS IS 1757-1 : 2014 METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
10/30219236 DC : DRAFT DEC 2010 BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
BS EN 61094-8:2012 Electroacoustics. Measurement microphones Methods for determining the free-field sensitivity of working standard microphones by comparison
14/30293544 DC : 0 BS EN 14791 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD
14/30293551 DC : 0 BS EN 14790 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD
BS ISO 16331-1:2017 Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments Performance of handheld laser distance meters
16/30339349 DC : DRAFT APR 2016 BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES
BS ISO 16578:2013 Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences
11/30254162 DC : 0 BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
PD IEC/TS 62492-2:2013 Industrial process control devices. Radiation thermometers Determination of the technical data for radiation thermometers
BS ISO 16000-6:2011 Indoor air Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
BS EN 15980:2011 Air quality. Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene
UNE-ISO 16269-6:2015 Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
11/30218530 DC : DRAFT FEB 2011 BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS
UNE-EN 61000-4-3:2007 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
10/30201065 DC : DRAFT DEC 2010 BS EN ISO 13138 - AIR QUALITY - SAMPLING CONVENTIONS FOR AIRBORNE PARTICLE DEPOSITION IN THE HUMAN RESPIRATORY SYSTEM
BS ISO 18132-3:2011 Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
UNE-EN 62058-31:2011 Electricity metering equipment (a.c.) - Acceptance inspection -- Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C)
I.S. EN 15267-4:2017 AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES
BS EN ISO 20785-2:2017 Dosimetry for exposures to cosmic radiation in civilian aircraft Characterization of instrument response
DIN EN ISO 148-1:2015-09 (Draft) METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
BS EN 61000-4-20:2003 Electromagnetic Compatibility (EMC) Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
13/30280551 DC : 0 BS ISO 16840-6 - WHEELCHAIR SEATING - PART 6: SIMULATED USE AND DETERMINATION OF THE CHANGES IN PROPERTIES - SEAT CUSHIONS
13/30276628 DC : 0 BS EN 62704-3 ED 1.0 - DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ - 6 GHZ - PART 3: SPECIFIC REQUIREMENTS FOR USING THE FINITE-DIFFERENCE TIME-DOMAIN (FDTD) METHOD FOR SAR CALCULATIONS OF MOBILE PHONES
IEC 62754:2017 Computation of waveform parameter uncertainties
12/30256716 DC : 0 BS ISO/ASTM 51702 - PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING
BS EN 61000-4-22:2011 Electromagnetic compatibility (EMC) Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs)
BS EN IEC 61400-12-2:2013 Wind turbines Power performance of electricity-producing wind turbines based on nacelle anemometry
CEI EN 61788-19 : 2014 SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
BS ISO 8196-1:2009 Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Analytical attributes of alternative methods
15/30289876 DC : 0 BS EN ISO 148-1 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
ISO 13474:2009 Acoustics Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
17/30349843 DC : 0 BS EN ISO 11704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING LIQUID SCINTILLATION COUNTING
BS EN ISO 11608-5:2012 Needle-based injection systems for medical use. Requirements and test methods Automated functions
I.S. EN ISO 16610-21:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
17/30349807 DC : 0 BS EN ISO 9698 - WATER QUALITY - TRITIUM - TEST METHOD USING LIQUID SCINTILLATION COUNTING
12/30257202 DC : 0 BS ISO/IEC 18047-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ
I.S. EN 61260-3:2016 ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 3: PERIODIC TESTS
17/30347911 DC : 0 BS ISO 11929-3 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 3: APPLICATIONS TO UNFOLDING METHODS
I.S. EN 61400-13:2016 WIND TURBINES - PART 13: MEASUREMENT OF MECHANICAL LOADS
BS ISO 16494:2014 Heat recovery ventilators and energy recovery ventilators. Method of test for performance
DIN ISO 11352:2013-03 WATER QUALITY - ESTIMATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION AND QUALITY CONTROL DATA (ISO 11352:2012)
BS IEC 60462:2010 Nuclear instrumentation. Photomultiplier tubes for scintillation counting. Test procedures
BS EN 62555:2014 Ultrasonics. Power measurement. High intensity therapeutic ultrasound (HITU) transducers and systems
BS IEC 62607-3-1 : 2014 NANOMANUFACTURING - KEY CONTROL CHARACTERISTICS - PART 3-1: LUMINESCENT NANOMATERIALS - QUANTUM EFFICIENCY
BS EN 60404-15 : 2012 MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS (IEC 60404-15:2012)
I.S. EN ISO 11819-2:2017 ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 2: THE CLOSE-PROXIMITY METHOD (ISO 11819-2:2017)
BS ISO 18589-4:2009 Measurement of radioactivity in the environment. Soil Measurement of plutonium isotopes (plutonium 238 and Plutonium 239 + 240) by alpha spectrometry
BS ISO 16730-1:2015 Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General
BS ISO 3567:2011 Vacuum gauges. Calibration by direct comparison with a reference gauge
15/30328565 DC : 0 BS EN 60645-1 ED4.0 - ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY
16/30337302 DC : 0 BS EN ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD
DIN EN ISO 14720-1:2013-06 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS (ISO 14720-1:2013)
BS EN 16913:2017 Ambient air. Standard method for measurement of NO<sub>3</sub><sup>-</sup>, SO<sub>4</sub><sup>2-</sup>, Cl<sup>-</sup>, NH<sub>4</sub><sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, Ca<sup>2+</sup> in PM2,5 as deposited on filters
UNI EN ISO 25178-602 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
PD ISO/TS 14411-1:2017 Preparation of particulate reference materials Polydisperse material based on picket fence of monodisperse spherical particles
ISO 20785-3:2015 Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes
ISO 11665-4:2012 Measurement of radioactivity in the environment Air: radon-222 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
14/30303611 DC : 0 BS EN ISO 19694-6 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY
BS EN 61788-4:2016 Superconductivity Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
15/30275154 DC : 0 BS ISO 18406 - UNDERWATER ACOUSTICS - MEASUREMENT OF UNDERWATER RADIATED SOUND FROM PERCUSSIVE PILE DRIVING
12/30250460 DC : 0 BS ISO 16378 - SPACE SYSTEMS - MEASUREMENTS OF THERMO-OPTICAL PROPERTIES OF THERMO CONTROL MATERIALS
12/30251867 DC : 0 BS EN ISO 16610-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS
UNE-EN ISO 16638-1:2018 Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015)
13/30255474 DC : 0 BS ISO 7504 - GAS ANALYSIS - VOCABULARY
12/30264187 DC : DRAFT MAY 2012 BS EN 60318-3 - ELECTRO ACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 3: ACOUSTIC COUPLER FOR THE CALIBRATION OF SUPRA-AURAL EARPHONES USED IN AUDIOMETRY
10/30208977 DC : 0 BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS
UNI EN ISO 13199 : 2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER
BS ISO 16405:2015 Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique
BS ISO 16378:2013 Space systems - Measurements of thermo-optical properties of thermal control materials
BS EN 16272-4:2016 Railway applications. Track. Noise barriers and related devices acting on airborne sound propagation. Test method for determining the acoustic performance Intrinsic characteristics. In situ values of sound diffraction under direct sound field
BS ISO 16254:2016 Acoustics. Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation. Engineering method
13/30263150 DC : 0 BS EN ISO 16859-1 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD
IES LM 66 : 2014 ELECTRICAL AND PHOTOMETRIC MEASUREMENTS OF SINGLE-BASED FLUORESCENT LAMPS
PD IEC/TS 62903:2018 Ultrasonics. Measurements of electroacoustical parameters and acoustic output power of spherically curved transducers using the self-reciprocity method
BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
17/30356073 DC : 0 BS ISO 19101-2 - GEOGRAPHIC INFORMATION - REFERENCE MODEL - PART 2: IMAGERY
14/30254042 DC : 0 BS EN ISO 15004-2 - OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION
BIS IS/ISO/IEC 17025 : 2005 AMD 1 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
BS ISO 9698 : 2010 WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD
11/30211367 DC : DRAFT JULY 2011 BS ISO 17123-4 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 4: ELECTRO-OPTICAL DISTANCE METERS (EDM INSTRUMENTS)
BS EN ISO 13102:2012 Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
14/30288062 DC : 0 BS EN 61377 ED. 2.0 - RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS
BS ISO 8672:2014 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
17/30352625 DC : DRAFT SEP 2017 BS IEC 62282-8-101 ED1.0 - FUEL CELL TECHNOLOGIES - PART 8-101: ENERGY STORAGE SYSTEMS USING FUEL CELL MODULES IN REVERSE MODE - TEST PROCEDURES FOR SOLID OXIDE SINGLE CELL AND STACK PERFORMANCE INCLUDING REVERSING OPERATION
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption — BET method
BS EN 62359 : 2011 ULTRASONICS - FIELD CHARACTERIZATION - TEST METHODS FOR THE DETERMINATION OF THERMAL AND MECHANICAL INDICES RELATED TO MEDICAL DIAGNOSTIC ULTRASONIC FIELDS
15/30302184 DC : 0 BS ISO 17208-1 - UNDERWATER ACOUSTICS - QUANTITIES AND PROCEDURES FOR DESCRIPTION AND PRECISION MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: REQUIREMENTS FOR PRECISION MEASUREMENTS IN DEEP WATER USED FOR COMPARISON PURPOSES
I.S. EN ISO 17450-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
BS ISO 12764:2017 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
ASTM D 6552 : 2006 : R2011 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
I.S. EN 62751-2:2014 POWER LOSSES IN VOLTAGE SOURCED CONVERTER (VSC) VALVES FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - PART 2: MODULAR MULTILEVEL CONVERTERS
14/30296672 DC : 0 BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS
16/30341489 DC : 0 BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS
I.S. EN 50629:2015 ENERGY PERFORMANCE OF LARGE POWER TRANSFORMERS (U[M] > 36 KV OR S[R] >= 40 MVA)
UNE-EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
EN 62220-1-1:2015 Medical electrical equipment - Characteristics of digital x-ray imaging devices - Part 1-1: Determination of the detective quantum efficiency - Detectors used in radiographic imaging
CEI EN 50379-2 : 2012 SPECIFICATION FOR PORTABLE ELECTRICAL APPARATUS DESIGNED TO MEASURE COMBUSTION FLUE GAS PARAMETERS OF HEATING APPLIANCES - PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED IN STATUTORY INSPECTIONS AND ASSESSMENT
BS ISO 4360:2008 Hydrometry. Open channel flow measurement using triangular profile weirs
UNI EN ISO 16610-71 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS
PD ISO/IEC TR 18047-2:2006 Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications below 135 kHz
CEI EN 61280-4-2 : 2015 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
UNI EN ISO 3611 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS
BS ISO 19581:2017 Measurement of radioactivity. Gamma emitting radionuclides. Rapid screening method using scintillation detector gamma-ray spectrometry
UNI EN ISO 17201-5 : 2010 ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 5: NOISE MANAGEMENT
ASHRAE GUIDELINE 2 : 2010 : R2014 ENGINEERING ANALYSIS OF EXPERIMENTAL DATA
EN 62754:2017 Computation of waveform Parameter uncertainties
CEI EN 61280-1-1 : 2014 FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES - PART 1-1: TEST PROCEDURES FOR GENERAL COMMUNICATION SUBSYSTEMS - TRANSMITTER OUTPUT OPTICAL POWER MEASUREMENT FOR SINGLE-MODE OPTICAL FIBRE CABLE
PREN 13832-1 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
12/30264449 DC : DRAFT JULY 2012 BS EN ISO 6974-5 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - ISOTHERMAL METHOD FOR NITROGEN, CARBON DIOXIDE, C1 TO C5 HYDROCARBONS AND C6+ HYDROCARBONS
ISO 14382:2012 Workplace atmospheres — Determination of toluene diisocyanate vapours using 1-(2-pyridyl)piperazine-coated glass fibre filters and analysis by high performance liquid chromatography with ultraviolet and fluorescence detectors
I.S. EN 60469:2013 TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV))
BS ISO 18589-5:2009 Measurement of radioactivity in the environment. Soil Measurement of strontium 90
BS ISO 17735:2009 Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography
EN ISO 20743:2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
CSA ISO/IEC 18046-2:2013 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE
CSA ISO/IEC 18046-1 : 2013 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 1: TEST METHODS FOR SYSTEM PERFORMANCE
BS ISO 18899:2013 Rubber. Guide to the calibration of test equipment
BS ISO 11665-5 : 2012 MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 5: CONTINUOUS MEASUREMENT METHOD OF THE ACTIVITY CONCENTRATION
IEC 61000-4-31:2016 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
ISO/TR 24094:2006 Analysis of natural gas Validation methods for gaseous reference materials
BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal Material measures
UNE-EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
EN 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
UNE-ISO/IEC 17007:2010 Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment
CSA C393 : 2012 TEST METHODS FOR MEASURING POWER CONSUMPTION IN LOW AND IDLE POWER MODES OF COMMERCIAL AND INDUSTRIAL EQUIPMENT
DIN ISO 16592:2015-12 MICROBEAM ANALYSIS - ELECTRON PROBE MICROANALYSIS - GUIDELINES FOR DETERMINING THE CARBON CONTENT OF STEELS USING A CALIBRATION CURVE METHOD (ISO 16592:2012)
CAN/CSA-IEC 61400-12-1:17 Wind energy generation systems — Part 12-1: Power performance measurements of electricity producing wind turbines (Adopted IEC 61400-12-1:2017, second edition, 2017-03) | Systèmes de génération d’énergie éolienne — Partie 12-1 : Mesures de performance de puissance des éoliennes de production d’électricité (norme IEC 61400-12-1:2017 adoptée, deuxième édition, 2017-03)
ISO 1217:2009 Displacement compressors Acceptance tests
IEC TS 62886:2016 Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz
CSA N292.5 : 2011 GUIDELINE FOR THE EXEMPTION OR CLEARANCE FROM REGULATORY CONTROL OF MATERIALS THAT CONTAIN, OR POTENTIALLY CONTAIN, NUCLEAR SUBSTANCES
DIN EN ISO 10846-5:2009-07 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
UNI ISO 22514-7:2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
IEC 60500:2017 Underwater acoustics - Hydrophones - Properties of hydrophones in the frequency range 1 Hz to 500 kHz
ISO 16063-42:2014 Methods for the calibration of vibration and shock transducers Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
CAN/CSA-ISO/IEC 18047-2:13 (R2017) Information technology - Radio frequency identification device conformance test methods - Part 2: Test methods for air interface communications below 135 kHz (Adopted ISO/IEC 18047-2:2012, first edition, 2012-01-15)
PREN 9138 : 200P1 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
ASTM E 2930 : 2013 Standard Practice for Pressure Decay Leak Test Method
I.S. EN 60601-2-62:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) EQUIPMENT
CSA ISO/IEC TR 18047-4 : 2005 INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 4: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 2,45 GHZ
UNE-EN ISO 12999-1:2014 Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014)
ISO 16378:2013 Space systems — Measurements of thermo-optical properties of thermal control materials
I.S. EN 50563:2011 EXTERNAL A.C. - D.C. AND A.C. - A.C. POWER SUPPLIES - DETERMINATION OF NO-LOAD POWER AND AVERAGE EFFICIENCY OF ACTIVE MODES
IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
BS EN 61094-3:2016 Electroacoustics. Measurement microphones Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique
PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
EN 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
DIN EN ISO 16859-1 E : 2016 METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015)
DKD-R 3-3 : 2010 CALIBRATION OF FORCE MEASURING DEVICES
I.S. EN 61788-6:2011 SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS
CEI UNI ISO/IEC 17007 : 2012 CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT
UNI EN 15979 : 2011 TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION
CEI EN 61180 : 1ED 2017 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS, TEST EQUIPMENT
UNI EN ISO 11608-5 : 2013 NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS
DIN EN ISO 12311:2015-06 Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15); German version EN ISO 12311:2013
BS EN 61526:2013 Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters
UNE-EN ISO 14064-1:2012 Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006)
BS EN 60731:2012 Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy
IEC 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens
DKD-R 6-2-2 : 2002 KALIBRIERUNG VON MESSMITTELN FUER VAKUUM - TEIL 2: MESSUNSICHERHEITEN
CSA Z24511 : 2010 ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES
ISO 29473:2010 Fire tests — Uncertainty of measurements in fire tests
BS ISO 16610-30:2015 Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
UNE-EN ISO 9698:2016 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010)
DKD-R 3-7 : 2010
CSA IEC 61400-11 : 2013(R 2018) WIND TURBINES - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES
ISO 17123-4:2012 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors)
BS ISO 8769:2010 Reference sources. Calibration of surface contamination monitors. Alpha-, beta- and photon emitters
DKD-R 3-9 : 2005 KONTINUIERLICHE KALIBRIERUNG VON KRAFTAUFNEHMERN NACH DEM VERGLEICHSVERFAHREN
I.S. EN 61000-4-6:2014 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
I.S. CEN/TS 17021:2017 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF SULPHUR DIOXIDE BY INSTRUMENTAL TECHNIQUES
API MPM CH22.3 : 2015 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 22.3: TESTING PROTOCOL FOR FLARE GAS METERING
CAN/CSA-ISO 11137-3:17 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06)
I.S. EN 61400-12-2:2013 WIND TURBINES - PART 12-2: POWER PERFORMANCE OF ELECTRICITYPRODUCING WIND TURBINES BASED ON NACELLE ANEMOMETRY
I.S. EN 60060-2:2011 HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS
BS EN ISO 10704:2015 Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method
BS ISO 1217 : 2009 DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS
I.S. EN 60846-1:2014 RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
S.R. CEN/TS 16272-7:2015 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 7: EXTRINSIC CHARACTERISTICS - IN SITU VALUES OF INSERTION LOSS
I.S. EN ISO 16610-85:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
DIN EN ISO 11204:2010-10 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
CISPR 16-1-1:2015 RLV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
BS EN 60601-2-37 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT
BS EN ISO 9697:2017 Water quality. Gross beta activity in non-saline water. Test method using thick source
I.S. EN ISO 6789-2:2017 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINLY (ISO 6789-2:2017)
I.S. EN 60645-1:2017 ELECTROACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: EQUIPMENT FOR PURE-TONE AND SPEECH AUDIOMETRY
I.S. EN ISO 25139:2011 STATIONARY SOURCE EMISSIONS - MANUAL METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING GAS CHROMATOGRAPHY
PREN 407 : DRAFT 2017 PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE)
EN 61745:2017 End-face image analysis procedure for the calibration of optical fibre geometry test sets
ISO/TR 18105:2014