ISO/TR 10064-4:1998
Current
Current
The latest, up-to-date edition.
Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking
Amended by
Available format(s)
Hardcopy , PDF
Published date
15-10-1998
£126.00
Excluding VAT
| Committee |
ISO/TC 60/SC 1
|
| DocumentType |
Technical Report
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| SAC GB/Z 18620.4 : 2002 | Identical |
| NEN NPR ISO/TR 10064-4 : 1998 C1 2006 | Identical |
| BS ISO/TR 10064-4:1998 | Identical |
| DIN ISO 14635-2:2010-01 | Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004) |
| 11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
| AGMA ISO 1328 2 : 1999 | CYLINDRICAL GEARS - ISO SYSTEM OF ACCURACY - PART 2: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO RADIAL COMPOSITE DEVIATIONS AND RUNOUT INFORMATION |
| 05/30128083 DC : DRAFT JAN 2005 | BEVEL GEARS - ISO SYSTEM OF ACCURACY |
| ISO/TR 10064-1:2017 | Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks |
| DIN ISO 14635-1:2006-05 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000) |
| AGMA 912 : A | MECHANISMS OF GEAR TOOTH FAILURE |
| AGMA 2015-1 : A | ACCURACY CLASSIFICATION SYSTEM - TANGENTIAL MEASUREMENTS FOR CYLINDRICAL GEARS |
| AGMA 915-2 : A | INSPECTION PRACTICES - PART 2: CYLINDRICAL GEARS - RADIAL MEASUREMENTS |
| VDI/VDE 2613:2003-12 | Pitch and runout testing on gearings - Cylindrical gears, whormwheels, bevel gears |
| VDI/VDE 2609:2000-10 | Determination of tooth contact patterns for gearings |
| PD ISO/TR 10064-6:2009 | Code of inspection practice Bevel gear measurement methods |
| BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
| 04/30112988 DC : DRAFT APR 2004 | ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
| 05/30134748 DC : DRAFT JUNE 2005 | ISO 14521 - GEARS - CALCULATION OF LOAD CAPACITY OF WORMGEARS |
| BS ISO 14635-3:2005 | Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| AGMA ISO 17485 : A | BEVEL GEARS - ISO SYSTEM OF ACCURACY |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| PD ISO/TR 14521:2010 | Gears. Calculation of load capacity of wormgears |
| BS 436-5:1997 | Spur and helical gears Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| PD ISO/TR 10064-1:2017 | Code of inspection practice Measurement of cylindrical gear tooth flanks |
| BS ISO TR 10064-2:1996 | Code of inspection practice Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-6:2009 | Code of inspection practice — Part 6: Bevel gear measurement methods |
| ISO/TR 10064-2:1996 | Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO 81400-4:2005 | Wind turbines — Part 4: Design and specification of gearboxes |
| ISO/TR 10064-3:1996 | Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| ISO 14635-3:2005 | Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 17485:2006 | Bevel gears — ISO system of accuracy |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| DIN ISO 14635-3:2011-08 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005) |
| BS ISO 17485:2006 | Bevel gears. ISO system of accuracy |
| BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| ISO/TR 14521:2010 | Gears — Calculation of load capacity of wormgears |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 1328-2:1997 | Cylindrical gears — ISO system of accuracy — Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) |
| ISO 701:1998 | International gear notation — Symbols for geometrical data |
| AGMA 2000 : A | GEAR CLASSIFICATION AND INSPECTION HANDBOOK - TOLERANCES AND MEASURING METHODS FOR UNASSEMBLED SPUR AND HELICAL GEARS (INCLUDING METRIC EQUIVALENTS) |
| ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears — Part 1: Flash temperature method |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength |
| ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears — Part 2: Integral temperature method |
| ISO/TR 10064-3:1996 | Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO/TR 10064-2:1996 | Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO 13281:1997 | Industrial automation systems — Manufacturing Automation Programming Environment (MAPLE) — Functional architecture |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation |
| ISO 286-1:2010 | Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile |
| ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
| ISO/TR 10064-1:2017 | Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks |
Summarise
£126.00
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.