• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-PRF-5606 Revision H:2002

Current
Current

The latest, up-to-date edition.

HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
Available format(s)

PDF

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Defines the characteristics and provides the requirements for a petroleum base hydraulic fluid for use in the -54 Degree C to +135 Degree C temperature range.

Committee
FSC 9150
DevelopmentNote
Inactive for new design. Supersedes MIL H 5606 (G). (07/2003)
DocumentType
Standard
Pages
69
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

SAE AS 60491 : 2015 SLEEVE, PROTECTION, FOR CABLE AND HARNESS PROTECTION
MIL-PRF-32517 Base Document:2015 SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR
17/30371343 DC : 0 BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
SAE AS 81914 : 2016 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013 SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM
MIL-DTL-83054 Revision C:2003 BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
MIL-DTL-5515 Revision F:2013 PUMP, HYDRAULIC, RAM, HAND DRIVEN
MIL-PRF-46846 Revision D:2013 Rubber, Synthetic, Heat - Shrinkable
MIL-PRF-32104 Base Document:2010 MOBILE HYDRAULIC OIL DISPENSER
MIL-STD-290 Revision H:2013 PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS
MIL-DTL-8815-31 Base Document:2009 FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F
UNI EN 4689 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
UNI EN 4687 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
SAE AIR 810 : 2013 DEGRADATION LIMITS OF HYDROCARBON-BASED HYDRAULIC FLUIDS, MIL-PRF-5606, MIL-PRF-83282, AND MIL-PRF-87257 USED IN HYDRAULIC TEST STANDS
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
NF EN 3155-069 : 2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD
BS EN 4687:2012 Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application
MIL-DTL-85052 Revision B:2005 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
NF EN 3155-067 : 2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD
MIL-PRF-83383 Revision F:2017 Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For
09/30210064 DC : DRAFT SEP 2009 BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION
UNI EN 4688 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
BS EN 3155-067:2009 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
MIL-DTL-32554 Base Document:2016 STRAPS, TIE-DOWN, ADJUSTABLE, NON-METALLIC, CABLE BUNDLING, GENERAL SPECIFICATION FOR
MIL-DTL-22992 Revision H:2015 Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
SAE AS 595 : 2015 AEROSPACE - CIVIL TYPE VARIABLE DELIVERY, PRESSURE COMPENSATED, HYDRAULIC PUMP
SAE AS 23053 : 2016 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
PREN 4689 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
PREN 3155-067 : 200P1 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD
SAE AS 5951 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
ISO 11171:2016 Hydraulic fluid power Calibration of automatic particle counters for liquids
SAE AS 23190 : 2015 WIRING, POSITIONING, AND SUPPORT ACCESSORIES
SAE AS 83485 : 2016 O-RING MOLDED FROM AMS7287 MATERIAL
SAE AS 1946 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC
BS EN 3155-039:2007 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard
MIL-DTL-83797 Revision C:2008 HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-DTL-27272 Revision D:2015 Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for
MIL-PRF-8805-100 Revision G:2012 Switches, Sensitive, Plunger, 10 Amperes 2PDT and 7 Amperes 4PDT, Resilient Seal
MIL-DTL-8790 Revision F:2007 Hose Assemblies, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +275 Degrees F, Field Attachable
MIL-DTL-87104 Revision C:2014 COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR
MIL-DTL-83796 Revision B:2008 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-DTL-5523 Revision E:2011 VALVE; RELIEF, HYDRAULIC PRESSURE
MIL-DTL-32330 Revision A:2015 Hose Assembly, Conductive Polytetrafluoroethylene Tube, Smooth Bore, Flared and Flareless, Tube to Hose, with Swivel Nut
MIL-DTL-25579 Revision H:2014 Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for
MIL-DTL-8788 Revision G:2015 Hose, Rubber, Hydraulic, High Pressure 3,000 PSI, Operating Temperature Range -65 Degrees F to +160 Degrees F
MIL-DTL-27267 Revision D:2012 Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure
SAE AS 85560 : 2013 BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR
MIL-PRF-18148 Revision D:2009 CONNECTORS, ELECTRICAL, AIRCRAFT STORAGE BATTERY - GENERAL SPECIFICATION FOR
MIL-DTL-25708 Revision F:2008 ANTENNAS, BLADE, L-BAND, GENERAL SPECIFICATION FOR
SAE ARP 5369 : 2016 GUIDELINES FOR WIRE IDENTIFICATION MARKING USING THE HOT STAMP PROCESS
SAE AS 81934 : 2016 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
A-A-59935 Base Document:2013 Conical Seal, Crush, 37 Degree Flared Tube Fitting, General Requirements for
MIL-PRF-5503 Revision G:2013 ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-PRF-6083 Revision G:2013 HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
MIL-DTL-25427 Revision B:2009 COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR
MIL-DTL-32435 Base Document:2013 Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure
BS EN 4689:2012 Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application
SAE AS 81582 : 2017 CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR
MIL-DTL-25955 Revision A:2004 CONNECTORS, ELECTRICAL, ENVIRONMENT RESISTING, MINIATURE, WITH SNAP-IN CONTACTS, OR HERMETICALLY SEALED WITH NON-REMOVABLE CONTACTS, GENERAL SPECIFICATION FOR
MIL-DTL-83296 Revision B:2009 Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
MIL-DTL-25516 Revision F:2004 CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR
NASA KSC SPEC F 0006 : 2009 HEAT AND BLAST PROTECTION COATING MATERIALS AND APPLICATION METHODS, SPECIFICATION FOR
MIL-DTL-83298 Revision C:2009 Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic
MIL-DTL-8815-32 Base Document:2010 FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT
MIL-DTL-81716 Revision A:2009 PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F)
14/30298728 DC : 0 BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD
SAE AIR 5358 : 2016 LANDING GEAR SHOCK STRUT HYDRAULIC FLUID
MIL-DTL-3702 Revision F:2012 CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION
SAE AS 83248/1 : 2016 O-RING MOLDED FROM AMS7276 MATERIAL
MIL-DTL-83528 Revision H:2018 Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL-DTL-9395-39 Revision D:2010 SWITCHES, PRESSURE, (GAUGE) TYPE 2, LOW LEVEL TO 5 AMPERES
I.S. EN 4688:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
MIL-PRF-62382 Revision C:2011 VALVE, HYDRAULIC, PRESSURE RELIEF (METRIC)
MIL-DTL-64154 Revision B:2008 LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC
SAE AS 4623 : 2016 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 3,000 PSI, 275 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
SAE AIR 1362 : 2016 AEROSPACE HYDRAULIC FLUIDS PHYSICAL PROPERTIES
SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
SAE AS 5466 : 2012 AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - QUANTITY MEASURING
SAE AS 620 : 2012 HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT
SAE ARP 81490 : 2016 TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE
PREN 3155-068 : 200P1 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD
SAE AS 5958 : 2017 FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR
I.S. EN 4687:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
SAE AS 83248/2 : 2016 O-RING MOLDED FROM AMS7259 MATERIAL
SAE AS 683 : 2012 INSTALLATION PROCEDURES AND TORQUES FOR FLUID CONNECTIONS
SAE AS 28772 : 2015 'D' RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL
EN 4689:2012 Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
EN 4688:2012 Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
SAE AS 82819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES
SAE AIR 1228 : 2009 STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION
SAE AS 28778 : 2016 O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBER
MIL-DTL-13444 Revision H:2006 Hose and Hose Assemblies, Rubber: Fuel and Oil
MIL-DTL-83723-27 Revision C:2015 CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING
SAE AIR 5005 : 2015 AEROSPACE - COMMERCIAL AIRCRAFT HYDRAULIC SYSTEMS
MIL-DTL-8794 Revision F:2007 HOSE, SYNTHETIC RUBBER - HYDRAULIC FLUID, FUEL, AND OIL RESISTANT
MIL-DTL-26482 Revision H:2007 Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for
MIL-PRF-32058 Revision B:2017 CHOCK, WHEEL-TRACK - AVIATION, ADJUSTABLE ROPE TYPE
MIL-DTL-19068 Revision B:2006 VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS
MIL-DTL-5593 Revision E:2006 HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE
SAE AS 50151 : 2015 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR
MIL-DTL-32234 Base Document:2007 CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR
17/30371344 DC : 0 BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
BS EN 3155-069:2009 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 16, female, type D, solder, class P. Product standard
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-PRF-83860 Revision D:2013 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-8777 Revision F:2011 WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C
MIL-DTL-8795 Revision G:2014 Hose Assemblies, Elastomeric, Hydraulic, Fuel, Coolant, and Oil Resistant, General Specification for
MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
NF EN 3155-068 : 2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD
MIL-STD-3004 Revision D:2014 QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS
SAE ARP 1595 : 2013(R2019) DESIGN AND VERIFICATION OF AIRCRAFT NOSE WHEEL STEERING SYSTEMS
MIL-PRF-81757-17 Base Document:2009 BATTERY, STORAGE, AIRCRAFT, NICKEL-CADMIUM, HIGH-RATE, TYPE 2, 24-VOLT, 35-AMPERE-HOUR, CHARGE CONTROLLED
SAE AS 4459 : 2013 FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR
SAE AS 85720 : 2018 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR
SAE AIR 5565 : 2017 HISTORICAL DESIGN INFORMATION OF AIRCRAFT LANDING GEAR AND CONTROL ACTUATION SYSTEMS
SAE ARP 1827C : 2014 MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE
SAE AS 81824 : 2016 SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT
SAE AS 22759 : 2014 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
I.S. EN 4689:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
SAE AS 7510 : 2017 COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, SELF-LOCKING, FIXED CAVITY, HIGH CONDUCTIVITY, SELF-BONDING, PART SPECIFICATION
SAE AS 85485 : 2017 CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE
SAE AS 85421 : 2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR
SAE AS 18280 : 2017 FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
SAE AS 6235 : 2015 FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS
MIL-PRF-6164 Revision G:2012 VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING
MIL-PRF-8805-104 Revision D:2012 SWITCHES, SENSITIVE, PLUNGER, 7 AMPERES, 4PDT, RESILIENT SEAL, GROUNDED PLUNGER
MIL-DTL-25707 Revision G:2015 ANTENNA, FLUSH MOUNT, L-BAND, GENERAL SPECIFICATION FOR
16/30350072 DC : 0 BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD
MIL-DTL-32434 Base Document:2013 Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for
BS ISO 11171:2016 Hydraulic fluid power. Calibration of automatic particle counters for liquids
SAE AIR 5829 : 2008 AIR IN AIRCRAFT HYDRAULIC SYSTEMS
SAE ARP 1231 : 2017 GLAND DESIGN, ELASTOMERIC O-RING SEALS, GENERAL CONSIDERATIONS
SAE AS 5960 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC BRAID REINFORCED, 5080 PSI (35000 KPA), 400 DEGREES F (204 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS
SAE AIR 81 : 2016 IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS
MIL-DTL-26500 Revision G:2011 CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR
MIL-DTL-5516 Revision D:2008 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
MIL-DTL-5070 Revision F:2006 ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR
MIL-PRF-83861 Revision D:2013 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE
BS EN 3155-068:2009 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 08, female, type D, solder, class R. Product standard
MIL-STD-2161 Revision C:2014 Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft
MIL-DTL-8789 Revision G:2015 FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR
MIL-PRF-46170 Revision E:2013 HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544
I.S. EN 3155-068:2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 068: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, FEMALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD
ISO 8829-1:2009 Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 1: Metallic (stainless steel) braid
SAE ARP 1280 : 2014 AEROSPACE - APPLICATION GUIDE FOR HYDRAULIC POWER TRANSFER UNITS
PREN 4688 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
SAE AS 81714 : 2014 TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
PREN 4687 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
SAE AS 1339 : 2017 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC
SAE AS 81819 : 2010 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR
I.S. EN 3155-069:2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD
SAE AS 5729 : 2016 O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL
SAE ARP 4752 : 2013 AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS
SAE AS 83819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C)
SAE AS 81659 : 2017 CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR
SAE ARP 901 : 2017 BUBBLE-POINT TEST METHOD
BS EN 3155-041:2007 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard
BS EN 3155-025:2006 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard
BS EN 3155-024:2006 Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard
EN 3155-040:2007 Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard
EN 3155-068:2009 Aerospace series - Electrical contacts used in elements of connection - Part 068: Contacts, electrical, coaxial, size 08, female, type D, solder, class R - Product standard
EN 3155-025:2006 Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S - Product standard
MIL-DTL-5508 Revision C:2007 FUSES, AIRCRAFT AUTOMATIC QUANTITY-MEASURING, HYDRAULIC
EN 3155-067:2009 Aerospace series - Electrical contacts used in elements of connection - Part 067: Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard
EN 3155-041:2007 Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard
EN 3155-069:2009 Aerospace series - Electrical contacts used in elements of connection - Part 069: Contacts, electrical, coaxial, size 16, female, type D, solder, class P - Product standard
EN 3155-039:2007 Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard
EN 3155-024:2006 Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard
MIL-F-26301 Revision H:2014 FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR
MIL-DTL-24630 Revision A:2014 VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR
BS ISO 8829-1:2009 Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies Metallic (stainless steel) braid
SAE ARP 1311 : 2015 LANDING GEAR STRUCTURES AND MECHANISMS
SAE AIR 4094 : 2016 AIRCRAFT FLIGHT CONTROL SYSTEMS DESCRIPTIONS
14/30298727 DC : 0 BS EN 3155-024 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD
SAE AMS P 5510 : 2013 O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F)
16/30350073 DC : 0 BS EN 3155-025 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 025 - CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, FEMALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD
SAE AS 506 : 2004 HIGH TEMPERATURE INSULATED TERMINALS & SPLICES
MIL-DTL-5521 Revision C:2007 Washer, Aircraft Hydraulic Packing Back-Up
BS EN 4688:2012 Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application
MIL-DTL-83420 Revision P:2017 WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
MIL-DTL-9395-30 Revision H:2012 Switches, Pressure, (Gage), Type II 5 Amperes
PREN 3155-024 : 200P1 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 024: CONTACTS, ELECTRICAL, TRIAXIAL, SIZE 8, MALE, TYPE D, CRIMP, CLASS S - PRODUCT STANDARD
MIL-DTL-8815-33 Base Document:2011 FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU)
SAE AIR 887 : 2013 LIQUID FILTER RATINGS, PARAMETERS AND TESTS
SAE AS 4775 : 2017 AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
SAE AS 5467 : 2016 GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - FLOW RATE
SAE ARP 4925 : 2014 AEROSPACE DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT HELICOPTER HYDRAULIC SYSTEMS
SAE AS 81511 : 2016 CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR
SAE ARP 5632 : 2016 ROTORCRAFT: APPLICATION OF EXISTING AIRCRAFT DESIGNED TIRES, WHEELS AND BRAKES
SAE AS 83519 : 2015 SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR
SAE AIR 5490 : 2016 CARBON BRAKE CONTAMINATION AND OXIDATION
PREN 3155-069 : 200P1 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 069: CONTACTS, ELECTRICAL, COAXIAL, SIZE 16, FEMALE, TYPE D, SOLDER, CLASS P - PRODUCT STANDARD
SAE AS 4941 : 2015 AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS
SAE AIR 4543 : 2017 AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED
SAE AS 81703 : 2012 CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING
SAE AS 6116 : 2016 ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR
SAE AS 8942 : 2014 BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING
SAE ARP4912C:2017 DESIGN RECOMMENDATIONS FOR SPARE SEALS IN LANDING GEAR SHOCK STRUTS
SAE AS 6224 : 2015 WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT
SAE AS 81820 : 2014 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION
SAE AIR 786 : 2014 ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION
SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
I.S. EN 3155-067:2009 AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 067: CONTACTS, ELECTRICAL, COAXIAL, SIZE 08, MALE, TYPE D, SOLDER, CLASS R - PRODUCT STANDARD

ASTM D 892 : 2013-07 TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS
MIL-PRF-6083 Revision G:2013 HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
ASTM D 4898 : 2016 : REDLINE Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
MIL-PRF-46170 Revision E:2013 HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544
SAE AMS 3400 : 2017 FLUID, REFERENCE FOR TESTING POLYALPHAOLEFIN (PAO) RESISTANT MATERIAL
ASTM D 4636 : 2017 : REDLINE Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
ISO 11500:2008 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
ASTM D 972 : 2016 : REDLINE Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
ASTM D 4289 : 2014-02 TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
SAE AMS 3217/2 : 2012 TEST SLABS, ACRYLONITRILE BUTADIENE (NBR-L), LOW ACRYLONITRILE, 65-75
ISO 11171:2016 Hydraulic fluid power Calibration of automatic particle counters for liquids
ASTM D 5949 : 2016 : REDLINE Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
SAE AS 4059F : 2013 AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS
FED-STD-791 Revision D:2007 TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS

View more information
£16.70
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.