• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

PPP-B-640 Revision D:1966

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL

Available format(s)

PDF

Superseded date

25-10-1994

Covers the requirements for new fiberboard boxes for domestic and overseas shipment.

Committee
FSC 8115
DocumentType
Standard
Pages
37
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded

MIL-C-47224 Revision B:1993 COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT
O-F-499 Revision D:1985 FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT)
AA-B-260 Revision F:1975 BEDSPRING, BOX TYPE
MIL-S-52541 Base Document:1966 SURVEYING SET, TRIANGULATION RECONNAISSANCE, SPECIALISED PACKAGING OF
MIL-W-10430 Revision D:1994 WELDING RODS AND ELECTRODES, PACKAGING OF
MIL-T-55309 Base Document:1971 TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( )
MIL-P-24608 Revision A:1987 PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS
DDD-C-001799 Base Document:1972 CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION
GG-G-91 Revision D:1972 GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE
MIL-T-12173 Revision D:1992 TRAVELLER, BICYCLE
MIL-B-20179 Revision E:1992 BAG, BAILEY BRIDGE PARTS AND TOOLS: CLOTH, COTTON DUCK
MIL-P-24377 Revision A:1982 PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED
MIL-C-55158 Revision B:1973 CHARGER, BATTERY, PP-1659 ( ) /G
MIL-C-10479 Revision B:1969 CRYSTAL IMPEDANCE METER TS 683/TSM
MIL T 5578 : C TANK, FUEL, AIRCRAFT, SELF-SEALING
MIL-H-775 Revision E:1987 HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF
MIL R 20092 : L RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL
MMM-A-1617 Revision B:1995 ADHESIVE RUBBER BASE GENERAL PURPOSE
MIL I 52295 : B INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE
DOD-B-24559 Base Document:1977 BATTERY CELLS, MAIN STORAGE, LEAD ACID, DEEP SUBMERGENCE VEHICLES (METRIC)
MIL-L-52056 Revision D:1984 LIGHT, SIGNAL, SURVEYING: SELF ILLUMINATED WITH CARRYING CAEM FOR USE WITH RANGE POLE
MIL V 52837 : A NOTICE 1 VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED
MIL-S-196 Revision D:1988 SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF
MIL-C-24314 Revision C:1985 CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK)
MIL-P-49139 Base Document:1978 POWER SUPPLY PP6L48 ((/U
MIL-P-55200 Revision D:1973 POWER SUPPLY PP-2953 ( ) /U
MIL-V-28712 Base Document:1969 VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR
PPP-P-001938 Base Document:1976 PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED
MIL-P-25621 Revision B:1974 PRESERVATION, PACKAGING AND PACKING OF RUBBER AND NYLON FUEL, OIL AND WATER PLUS ALCOHOL CELLS
MIL H 49078 : 0 HANDSET H-250( (/U
L-F-475 Revision A:1965 FLOOR COVERING VINYL, SURFACE (TILE AND ROLL), WITH BACKING
GGG-B-0060 Revision A Interim Revision:1966 BAG, TOOL SATCHEL
GGG-L-001345 Base Document:1967 LEAD JOINT RUNNER
MIL-O-23678 Revision B:1982 Oxygen Systems, Portable, High Pressure, Aircraft
DDD-C-001023 Base Document:1966 CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER)
MIL-A-28716 Base Document:1969 AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR
TT-L-50 Revision G:1976 LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS)
MIL-R-12540 Revision B:1967 RECTIFIER, METALLIC RA-91
MIL-P-18324 Revision D:1964 PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION)
MIL-A-12636 Revision B:1969 ANALYZER ZM-3/U
AA-W-001950 Base Document:1975 WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME
MIL L 43432 : A LEATHER, PACKAGING AND PACKING OF
MIL C 12000 : H CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF
MIL-C-10320 Revision E:1982 COVER, LEVEL ROD, PHILADELPHIA: CANVAS
ASTM F 1348/F1348M : 1991 : R2007 Standard Specification for Pneumatic Rotary Descaling Machines
SAE AMS R 5001 :1998(S2015) RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM
MIL-E-17555 Revision H:1984 ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF
MIL E 75 : H ELECTRON TUBES PACKING OF
MIL-B-55521 Revision C:1983 BATTERIES, NONRECHARGEABLE, PACKING OF
MIL-R-24159 Revision A:1983 RECEPTACLE, CANISTER, CO 2 ABSORBENT
MIL-B-40028 Revision B:1976 BAG, BARRIER WITH VOLATILE CORROSION INHIBITOR TREATED LINERS
SS-C-466 Revision E:1964 CLOTH, THREAD, AND TAPE-ASBESTOS
GG M 181 : D MEASURER, MAP
MIL-A-23054 Revision A:1982 ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED
MIL M 9950 : A NOTICE 1 MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY
MIL-P-45051 Revision D:1985 PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC
MIL-C-8603 Revision B:1984 CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT
WW-H-001220 Base Document:1966 HEAD SPRINKLER, (UNDERGROUND CONNECTED)
L-F-001641 Base Document:1971 FLOOR COVERING TRANSLUCENT OR TRANSPARENT VINYL SURFACE WITH BACKING
MIL R 3593 : D REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF
MIL P 81997 : B POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC FREE, RECLOSABLE, TRANSPARENT
MIL-P-997 Revision D:1966 PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN
MIL-G-29170 Revision B:1988 GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS]
MIL-B-3694 Revision C:1975 BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90
L-P-516 Revision A:1967 PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST
DOD-C-24556 Base Document:1977 CURTAIN, TRACK AND SUSPENSION SYSTEM, BERTH (SHIPBOARD USE) (METRIC)
MIL-C-55639 Revision A:1973 CHARGER, BATTERY PP-4127 ( )/U
MIL S 3470 : D SPLINE AND WEIGHTS SET
GGG-C-415 Revision A:1965 CLAW, TACK
MIL-C-3955 Revision C:1975 CANS, COMPOSITE, SPIRALLY WOUND
KK-B-151 Revision H:1977 BELT, LINEMAN'S; AND STRAP, POLE LINEMAN'S TYPE
MIL-B-53067 Base Document:1987 BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON
MIL-C-3133 Revision C:1976 CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED
MIL-S-12645 Revision C:1984 SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING
GGG-G-15 Revision C:1975 GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC)
TT-P-641 Revision G:1976 PRIMER, PAINT, ZINC DUST-ZINC OXIDE (FOR GALVANIZED SURFACES)
MIL-C-7438 Revision G:1985 CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION
L-C-001369 Base Document:1969 CUSHION, CARPET AND RUG, BONDED URETHANE
MIL-R-55223 Revision B:1970 REGULATOR, VOLTAGE CN-514 ( ) /GRC
SAE AS 85848 : 2017 SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
AA-C-2859 Base Document:1994 CABINET, SECURITY, WEAPONS STORAGE
MIL-A-52767 Revision D:1989 AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT
MIL-A-52424 Revision B:1984 AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR
J-L-2744 Base Document:1990 LEADS, ELECTRICAL, ARC-WELDING
MIL E 52031 : D EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET
MIL BULL 343 : A DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF
W-J-800 Revision F:1992 JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED)
AA-F-363 Revision C:1990 FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE
MIL-R-13877 Revision D:1987 REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION
MIL-C-55442 Revision B:1985 CABLE ASSEMBLIES AND CORD ASSEMBLIES, PACKAGING OF
AA-F-357 Revision F:1970 FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY
J-C-30 Revision B:1989 CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION)
MIL-B-36488 Base Document:1966 BOOTH, AUDIOMETRIC EXAMINATION
MIL-C-85521 Base Document:1983 CONCENTRATOR, OXYGEN, GGU-7/A
MIL-P-71012 Revision A:1994 PISTOL, SEMIAUTOMATIC, COMPACT, 9MM: M11
MIL-P-16789 Revision D:1986 PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF
MIL-B-13831 Revision J:1985 BOAT, RECONNAISSANCE, PNEUMATIC: 3-MAN
WW-H-1053 Revision A:1987 HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL)
GG-T-35 Revision C:1989 TABLE; DRAWING, TRACING, AND SCRIBING
MIL-A-49095 Revision A:1976 AMPLIFIER, AUDIO FREQUENCY AM-6747()/V
MIL C 46747 : NOTICE 1 CARRIER, CARGO, AMPHIBIOUS, M116 AND M116E1, PROCESSING FOR STORAGE AND SHIPMENT OF
MIL G 17927 : C GASKET, ASBESTOS METALLIC COVER, RUBBER CORE
MIL P 5425 : D PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT
MIL-G-25507 Revision B:1991 GAGE, PRESSURE, DIAL INDICATING, OXYGEN 0-2000 PSI
PPP-P-1136 Revision D:1986 PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS
TT-L-47 Revision C:1976 LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER
MIL-R-23461 Revision A:1987 RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING
MIL-A-3816 Revision F:1992 ABRASIVES AND ABRASIVE PRODUCTS; PACKAGING OF
MIL-STD-726 Revision H:1985 PACKAGING REQUIREMENTS CODE
AA-C-001402 Base Document:1986 CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK
RR-P-1352 Revision C:1989 PARTITION, TOILET, COMPLETE
MIL-T-12236 Revision A:1975 TEST SET, ELECTRICAL POWER (TEST SET 1-199)
MIL-M-70466 Base Document:1993 MACHINE GUN, 7.62mm: M60E3
TT-P-001385 Base Document:1976 PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT)
MIL F 24044 : 0 FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR
PPP-P-1133 Revision C:1983 PACKAGING OF SYNTHETIC FIBER FABRICS
MIL-T-52332 Revision B:1991 TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60
MIL D 24709 : 0 DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64
MIL-M-55638 Base Document:1970 METER MODULATION ME-57 ( )/U
MIL P 16685 : D PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE)
MIL-L-24518 Base Document:1975 LAMINATE, VINYL FILM ALUMINUM, DECORATIVE
MIL-B-53083 Base Document:1988 BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB)
MIL-P-22968 Revision B:1984 PAPER, RECORDING, HEAT SENSITIVE
MIL-F-45687 Base Document:1961 FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF
MIL-R-43010 Revision B:1988 REMOULDING SET, SOIL & COMPACTION
MIL-T-49124 Base Document:1977 TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5
L-L-330 Revision B:1974 LINER, PLASTIC, WASTE RECEPTACLE
MIL-B-10154 Revision C:1961 Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document)
MIL J 2829 : E JOINT SEALING PACKING
MIL-B-23958 Revision A:1967 BRUSH, CLEANING, AIRCRAFT, METAL BRIGHTENING
PPP-P-1937 Base Document:1976 PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP CONTEMPORARY STYLE
MIL-A-2402 Revision D:1978 ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX)
MIL-R-81553 Revision B:1992 REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P
MIL L 3890 : A LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL AIR DIELECTRIC]
MIL-C-11020 Revision B:1966 CHESTS AND CASES, METAL, GENERAL SPECIFICATION FOR
MIL-C-55416 Base Document:1965 CODER BURST TRANSMISSION GROUP AN GRA 71() (UNITS OF)
MIL-T-52806 Revision A:1980 TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER
DDD-C-001630 Base Document:1973 CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE
MIL B 22019 : C BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED
FED-STD-803 Base Document:1991 PACKAGING OF COTTON & COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS)
MIL-H-1679 Revision F:1992 HOOK, TENT; WITH THIMBLE, FOR GUY LINE, ASSEMBLY TENT
TT-P-605 Revision B:1976 PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS)
GGG-F-00340 Base Document:1965 FILE, ROTARY
GG L 256 : E LETTERING SETS AND ACCESSORIES
MIL-H-9850 Revision C:1977 HINGE, BUTT, CONTINUOUS, PIANO
MIL C 45918 : 0 CLEVISES AND CONNECTORS (ROD END)
MIL-STD-1187 Base Document:1976 STANDARD SIZE UNIT, INTERMEDIATE AND EXTERIOR CONTAINERS FOR MODULAR PACKAGING AND UNITIZATION ON THE 40 INCH PALLET
MIL-STD-649 Revision C:1976 ALUMINUM AND MAGNESIUM PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE
MIL-R-52255 Revision D:1988 REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS
MIL-R-9208 Revision B:1968 REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS
GG-S-1341 Revision A:1975 WASHER-STERILIZER, SURGICAL INSTRUMENT
MIL-P-83927 Revision B:1981 Power Supplies, Guided Missile Launchers, Single Types PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, and Composite Type PP-4506/A and PS-1037
L-P-387 Revision A:1963 PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES)
MIL-F-24666 Base Document:1986 FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY
MIL-A-11210 Revision G:1981 AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR
MIL L 58085 : A LIGHT, BEACON, ANTI COLLISION AIRCRAFT
MIL-P-10603 Revision E:1990 PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF
MIL B 81705 : C BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE
MIL-M-11726 Revision E:1982 MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS
MIL-I-3158 Revision D:1968 INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS
MIL H 49092 : 0 HEADSET MICROPHONE H-325( )/TTC
SAE MA 2151 : 2015 CLAMP ASSEMBLIES, SADDLE OR OMEGA STYLE, TWO POINT MOUNT, MULTIPLE SHAPES, METRIC
MIL-L-38200 Revision B:1966 LIFE PRESERVER, UNDERARM, ADULT LPU 5/P
MIL-A-52435 Revision D:1984 AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR
MIL-T-17286 Revision D:1989 TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF
MIL-C-55508 Base Document:1966 COIL ASSEMBLY, TELEPHONE LOADING CU-260( ) /G
L-C-001676 Base Document:1970 CUSHION, CARPET AND RUG, VIRGIN URETHANE
PPP-B-638 Revision B:1975 BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF
MIL I 23053 : D INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED
MIL-F-3541 Revision C:1989 FITTING, LUBRICATION, GENERAL SPECIFICATION FOR
MIL-S-52098 Revision C:1992 STIFFENER ASSEMBLY, BALK CONNECTING
MMM-A-250 Revision C:1975 ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES)
DOD-B-24504 Revision B:1978 BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC)
PPP-P-1134 Revision D:1983 PACKAGING OF COTTON AND COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS)
GGG-B-351 Revision B:1963 BIN, STORAGE AND DISPLAY, ROTARY
MIL-HDBK-772 Base Document:1981 MILITARY PACKAGING ENGINEERING
MIL-S-8710 Revision B:1969 STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR
MIL-B-2316 Revision E:1992 BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF
MIL C 2486 : C CABLE, SPECIAL PURPOSE, ELECTRICAL WM-46/U
MIL-M-55336 Base Document:1971 MAINTENANCE ACCESSORY KIT, MK-1192( ) /ARM (UNITS OF)
PPP-F-320 Revision D:1970 FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES
MIL-R-5001 Revision B:1992 RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM
MIL-H-9890 Revision E:1988 HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS
MIL-M-85522 Revision A:1991 MONITOR, OXYGEN CRU-91/A
MIL-B-12233 Revision E:1986 BAGS, SAND, BURLAP & COTTON
MIL-P-14232 Revision E:1976 PARTS, EQUIPMENT AND TOOLS FOR ARMY MATERIAL, PACKAGING OF
MIL-G-5514 Revision G:1993 GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR
MIL-P-10388 Revision H:1990 PIPE FITTING, ONE OR MORE ENDS GROOVED
HH-I-435 Revision B:1977 INSULATORS, ELECTRIC, PORCELAIN AND GLASS
MIL-S-4461 Revision H:1974 SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS
MIL-B-3434 Revision C:1981 BEATER, FOREST FIRE
MIL S 51028 : B SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE
DOD I 24688 : 0 INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM
MIL-R-16417 Revision J:1986 REPAIR KIT, CO2, INFLATABLE LIFE PRESERVERS
MIL A 12067 : B ANALYZER, SPECTRUM TS-723( )/U
MIL-I-46852 Revision C:1991 INSULATION TAPE, ELECTRICAL, SELF ADHERING UNSUPPORTED SILICONE RUBBER
MIL-PRF-900 Revision F:1973 RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
MIL-S-10145 Revision D:1965 SKETCHMASTER, VERTICAL, WITH CASE
MIL-C-28688 Base Document:1990 CABLE, FIBER OPTIC, PACKAGING OF
MIL E 55585 : F ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF
MIL-C-7474 Revision E:1978 CASTER, INDUSTRIAL
FF C 00431 : B CLIP, PAPER (BINDER)
PPP-P-1875 Base Document:1975 PREPARATION FOR DELIVERY REQUIREMENTS FOR CHAIRS, METAL AND PLASTIC, OFFICE
MIL L 49157 : A LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A
MIL-A-49382 Base Document:1980 AFOCAL ASSEMBLY, AN/VSG-2
MIL-G-24717 Base Document:1989 GASKET, SHEET, REFRIGERATION, NON-ASBESTOS
MIL-L-52696 Base Document:1970 LAMINATING RESIN
KKK-C-650 Revision E:1985 CREEPER, MECHANIC'S
FF-P-416 Revision E:1963 PIN, SAFETY
HH-I-521 Revision F:1980 INSULATION BLANKETS, THERMAL (MINERAL FIBER, FOR AMBIENT TEMPERATURES)
GGG-T-0030 Base Document:1965 TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED)
JJ-S-750 Revision A:1967 STRAP, WEBBING
FF-B-195 Base Document:1960 BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED)
DOD-P-15817 Revision D:1976 PARTS, SYNTHETIC RUBBER, FOR USE WITH BATTERIES OR IN BATTERY COMPARTMENTS OF SUBMARINES (METRIC)
MIL C 7905 : G CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI
MIL-B-233 Revision D:1987 BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE
MIL-T-81914 Base Document:1973 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
MIL-T-55603 Revision A:1975 TEST SET, TELEPHONE AN/SPTM-7
MIL-R-5520 Revision C:1964 RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE
MIL-B-23306 Revision B:1985 BINOCULAR, SHIP, 20-POWER AND ACCESSORIES
MIL-A-12374 Revision D:1982 ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM
MIL-T-55659 Base Document:1971 TEST FACILITIES KIT, MK-994()/AR (UNITS OF)
TT E 00488 : B ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS)
MIL-R-1296 Revision F:1993 RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING
MIL-N-23182 Revision A:1967 NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR
MIL-I-17214 Revision B:1984 INDICATOR, PERMEABILITY, LOW-MU (GO-NO-GO)
MIL-B-12841 Revision B:1970 BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE
PPP-T-1150 Revision B:1978 TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF
GGG-T-00559 Base Document:1964 TOOL KIT, LEATHERCRAFT
MIL-B-24222 Revision A:1978 BAGS , STORAGE, MASK, AIR LINE
MIL R 196 : C REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF
MIL-D-55456 Revision B:1969 DISTRIBUTION BOX, J-1077( )/U DISTRIBUTION BOX, J-2317( )/U
MIL C 62327 : A NOTICE 1 CARRIER, ARMORED, FULL TRACKED, M901 TOW VEHICLE (LESS TOW WEAPON) AND M981 FISTV, PROCESSING FOR STORAGE AND SHIPMENT OF
PPP-C-843 Revision D:1977 CUSHIONING MATERIAL, CELLULOSIC
MIL-I-50711 Base Document:1970 IRON BASE SINTERED METAL BARS (OIL PREGNATED)
MIL C 19328 : E CONVERTER, LIQUID OXYGEN, 5 LITER, MBA-5A
SAE AMSA8576A:1997(S2016) ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC
MIL-C-13720 Revision B:1983 CLAMP, BEAM, CARGO LASHING
L E 530 : A ENVELOPE, TRANSPARENT
PPP-P-001944 Base Document:1976 PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE
MIL-P-24333 Base Document:1968 PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC
PPP-B-1980 Base Document:1977 BOARDS, BULLETIN AND CONTROL, PACKAGING AND PACKING OF
MIL-G-21032 Revision D:1972 GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5
MIL-A-49180 Base Document:1978 ALARM DETECTOR ID-1974 ()/PPS-5
MIL-P-6063 Revision B:1978 PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR
MIL-C-3993 Revision C:1962 COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF
MIL T 4 : L TIRES & INNER TUBES (NON-AIRCRAFT) - PACKAGING OF
DOD-C-24594 Base Document:1979 CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC)
MIL-B-2766 Revision C:1987 BATTING, FIBROUS GLASS, LIFESAVING EQUIPMENT
MIL T 49081 : NOTICE 2 TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14
MIL L 61002 : 0 LABELS, PRESSURE-SENSITIVE ADHESIVE, FOR BAR CODES AND OTHER MARKINGS
L-P-393 Revision A:1964 PLASTIC MOLDING MATERIAL,POLYCARBONATE, INJECTION AND EXTRUSION
MIL-G-14106 Revision B:1979 GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED)
MIL-T-47023 Base Document:1974 TAPE, HEAT SHRINKABLE
MIL W 43334 : B WEBBING AND TAPE, TEXTILE, PACKAGING AND PACKING OF
MMM-A-187 Revision B:1968 ADHESIVE EPOXY RESIN BASE LOW AND INTERMEDIATE STRENGTH GENERAL PURPOSE
GGG-S-283 Revision A:1967 SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE)
MIL-C-52669 Base Document:1969 COPY AND SUPPLY SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF
MIL-H-21722 Revision B:1992 HOOK, THRUST STABILIZING, JATO-45OO POUNDS NOMINAL THRUST
SS-T-312 Revision B:1974 TILE, FLOOR, ASPHALT, RUBBER, VINYL, VINYL-ASBESTOS
MIL-B-3743 Revision D:1967 BRUSH, ELECTRICAL CONTACT
MIL-T-12756 Revision A:1959 TEST SET, BATTERY TESTER TS-183()/U
MIL C 1213 : E CUPS, GREASE
MIL-M-52793 Base Document:1974 MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT
MIL-R-12499 Revision C:1967 REPAIR EQUIPMENT, PNEUMATIC TARGET, PACKAGING OF
GG-S-1340 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
TT C 00598 : C CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION)
HH-P-46 Revision E:1975 PACKING; ASBESTOS, SHEET, COMPRESSED
DD-G-1403 Revision C:1983 GLASS, FLOAT, SHEET, FIGURED, COATED (HEAT-STRENGTHENED AND TEMPERED)
MMM-A-185 Revision B:1974 ADHESIVE RUBBER (FOR PAPER BONDING)
RR-K-795 Revision A:1974 KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS)
MIL-M-55198 Revision A:1977 MICROPHONE, DYNAMIC M-116 ( ) /G
GG-O-635 Revision A:1977 OPTICAL FLATS
MIL-A-55379 Revision A:1979 ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V)
GG-C-550 Revision B:1988 COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE
MMM-A-134 Base Document:1970 ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
MIL-W-80 Revision C:1966 WINDOW OBSERVATION ACRYLIC BASE ANTIELECTROSTATIC TRANSPARENT (FOR INDICATING INSTRUMENT)
FF-P-00416 Revision F:1971 PIN, SAFETY
GG S 00750 : B STENCIL DUPLICATING PRINT KIT, HAND STAMP
DOD-E-24618 Base Document:1983 ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS
MIL-C-24224 Revision B:1985 Cartridge, Gas Pressure, for Pressurizing Dry Chemical Fire Extinguishers
HH-I-525 Revision A:1968 INSULATION BOARD, THERMAL CORK (SUPERSEDES HH&C&561B)
MIL-C-22896 Revision A:1968 CONTACTOR
MIL-S-24660 Base Document:1985 Sprinkler Head, 180 Degrees Full Cone
MIL R 6855 : E RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES
MIL-I-23264 Revision A:1968 INSULATORS, CERAMIC, ELECTRICAL AND ELECTRONIC, GENERAL SPECIFICATION FOR
MIL-B-43666 Revision D:1986 BOXES, SHIPPING, CONSOLIDATION
MIL-E-24759 Base Document:1991 REDUCTOR ASSEMBLY IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE
AA-C-112 Revision D:1976 CARTS, SURGICAL DRESSING
GG W 00101 : C WASHERS, BEDPAN AND URINAL
MIL B 22191 : D BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE
MIL-B-45081 Revision E:1991 BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR
MIL-T-55335 Base Document:1971 TEST FACILITIES KIT, MK-1191 ( ) /AR(UNITS OF)
MIL-I-23366 Revision B:1987 INDICATOR, HORIZONTAL SITUATION ID-1O13(*)/A
MIL-T-12333 Revision C:1969 TEST SET, CRYSTAL UNIT, QUARTZ TS-710/TSM
HH-I-545 Revision B:1971 INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL)
FED-STD-224 Revision A:1972 CLOSING, SEALING AND REINFORCING OF FIBERBOARD SHIPPING CONTAINER, GENERAL METHOD FOR (INTERIM)
MIL-A-28879 Revision A:1985 ANTENNA ASSEMBLY, BUOYANT CABLE AS-2629B/BRR
MIL-B-45977 Revision B:1990 BINS, CABINETS, SHELVING AND WORKTABLES, PACKAGING OF
MIL-R-12323 Revision G:1992 REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF
MIL-B-28644 Revision A:1988 BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK
MIL-T-0012756 Revision B:1969 TEST SET, BATTERY (BATTERY TESTER TS 183 () U)
MIL-S-13282 Revision B:1973 SILVER AND SILVER ALLOYS
MIL D 5480 : F DATA, ENGINEERING AND TECHNICAL REPRODUCTION REQUIREMENTS FOR
MIL-F-52847 Base Document:1975 FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE
GGG-P-441 Revision A:1965 PLATES, ANGLE, ADJUSTABLE AND SOLID
MIL-I-695 Revision B:1969 INSULATION, ELECTRICAL, PAPER [SLOT CELL]
DOD-P-15816 Revision C:1977 PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC)
TT-C-499 Revision A:1975 COATING COMPOUND, CHEMICAL RESISTANT, CLEAR
ZZ-C-730 Revision A:1973 CUPS AND GLIDES, FURNITURE
MIL B 197 : F INT AMD 2 BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES, PREPARATION FOR DELIVERY OF
MIL-G-1086 Revision E:1975 GASKET MATERIAL, SYNTHETIC RUBBER [FOR BOLTED STEEL TANKS]
LLL-S-720 Revision A:1974 STIRRING STICK, BEVERAGE (WOOD)
MIL M 3996 : C MATTRESSES (EXCEPT PNEUMATIC TYPE), PACKAGING AND PACKING OF
MIL-D-45503 Revision A:1961 DRIVE, HYDRAULIC, T46
MIL-M-55564 Base Document:1969 MAINTENANCE KIT, ELECTRONIC EQUIPMENT MK-1035/ARC-131 ( ) (UNITS OF)
AA-C-00288 Revision B:1968 CHAIRS, FOLDING, WOOD, WITHOUT ARMS
MIL-P-24396 Revision A:1994 PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE)
HH-P-119 Revision A:1967 PACKING MATERIAL, SEWER JOINT, ASPHALT-SATURATED CELLULOSE-FIBER
GG-C-00716 Revision C:1990 CRUTCH, ADJUSTABLE, WOOD
MIL-P-52455 Revision A:1970 PIN REGISTER PUNCH BOARDS, PIN REGISTER BARS AND PIN REGISTER PLATES
MIL O 38338 : C (1) OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR
MIL-C-13294 Revision C:1966 CABLE, TELEPHONE, ELECTRICAL (INFANTRY FIELD WIRE, TWISTED PARI, WIRE WD-1/TT AND WD-14/TT
HH-P-41 Revision D:1986 PACKING, ASBESTOS, ROPE AND WICK
MIL-A-24456 Base Document:1971 ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE
MIL-C-8956 Revision A:1970 CLAMP, LOOP TUBE SUPPORT
MIL-S-25093 Revision B:1963 SEA RESCUE KITS, DROPPABLE
MIL P 6074 : A PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES
MIL-C-55532 Revision A:1969 CHARGER, BATTERY PP-1600 ( ) /G
FED-STD-802 Base Document:1991 PACKAGING OF SYNTHETIC FIBER FABRICS
MIL-I-55538 Base Document:1968 INFLATION LAUNCHING DEVICE, BALLOON, METEOROLOGICAL ML-594( )/U
MIL-T-19646 Revision A:1990 THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED
MIL-P-15877 Revision D:1973 PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE)
L F 00334 : E FILM, PHOTOGRAPHIC, ROLL, MICROFILM (BLACK AND WHITE)
DDD-C-95 Base Document:1965 CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC
MIL C 25369 : C CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS
MIL-A-52363 Revision C:1991 AIR CLEANERS, INTAKE: DRY-TYPE (FOR INTERNAL-COMBUSTION ENGINE)
GGG-P-00770 Revision A Interim Revision:1967 PULLER, FUSE, (S-SHAPE)
MIL-B-15228 Revision G:1988 BED, BUNK, STEEL, ROUND TUBE, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE)
GGG-A-825 Revision A:1967 AUGER MACHINE, PIPE AND SEWER, POWER OPERATED
MIL L 3572 : A LUBRICANT, COLLOIDAL GRAPHITE IN OIL
MIL-S-11716 Revision D:1993 SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60
HH-B-100 Revision B:1973 BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION)
DOD-B-24505 Revision C:1980 BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC)
MIL N 49065 : E NIGHT VISION GOGGLES AN/PVS-5A
ASTM F 1348/F1348M : 1991 : R2002 Standard Specification for Pneumatic Rotary Descaling Machines
SAE AMS P 22968 : 2016 PAPER, RECORDING, HEAT SENSITIVE
MIL B 22020 : D BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED
MIL-T-55655 Revision A:1972 TEST FACILITIES KIT MK-980 ( ) /PPS-5
MIL P 2845 : 0 PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS
MIL-A-49079 Revision A:1986 ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF)
PPP-H-1581 Revision A:1977 HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF
AA-W-001791 Revision A:1973 WARDROBE AND JANITOR'S CLOSET, WOOD, STEEL FRAME
MIL-B-38721 Revision B:1980 BOXES, CONSOLIDATION, FIBERBOARD AND POLYOLEFIN
PPP-P-600 Revision G:1992 PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL REQUIREMENTS FOR PACKAGING OF
MIL-N-3944 Revision D:1981 NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF
MIL-H-11689 Revision C:1974 HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING
MIL-V-11671 Revision A:1951 VIBRATOR PACK PP-68 ()/U
DOD K 24674 : 0 KIT, DISSOLVED OXYGEN (METHOD C), NAVAL SHIPBOARD, (METRIC)
H B 00621 : G BRUSH, STENCIL
MIL R 900 : F RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
MIL-G-20241 Revision D:1980 GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE
MIL-R-3065 Revision E:1984 RUBBER, FABRICATED PRODUCT
MIL-A-52019 Revision C:1991 ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE
MIL-A-8576 Revision C:1984 ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC
DOD-T-46151 Revision A:1979 TAPE,ADHESIVE, RUBBER (METRIC)
DOD-B-24507 Revision B:1978 BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC)
ZZ R 710 : A RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS
MIL-L-741 Revision D:1984 LEAD, ELECTRICAL, ARC WELDING
MIL T 49136 : 0 TEST SET, COUNTERMEASURES SET AN/ALM-178((
GGG-S-00625 Base Document:1964 SPOON, BODY AND FENDER
L-P-392 Revision A:1964 PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION
MIL V 9439 : D VALVE, OXYGEN, CYLINDER, HIGH PRESSURE
MIL-I-43684 Revision B:1989 INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, AND CARRIER
MIL-B-36560 Revision A:1975 BASSINET AND PRESSING TABLE COMBINATION, HOSPITAL
MIL S 18313 : G SLINGS, CARGO, NET, NYLON WEBBING
MIL-C-10541 Revision D:1978 COOLING UNIT, STEREOPLOTTER PROJECTION
UU-P-272 Revision C:1972 PAPER, WRAPPING, FREEZER (POLYETHYLENE COATED)
MIL-I-545 Revision B:1976 INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD
MIL-T-45542 Revision D:1990 TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF
PPP-B-140 Revision C:1993 BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF
L-F-333 Revision A:1974 FILM, PHOTOGRAPHIC, MOTION PICTURE (BLACK AND WHITE)
PPP-F-00320 Revision E:1991 FIBERBOARD: CORRUGATED AND SOLID, SHEET STOCK (CONTAINER GRADE) AND CUT SHAPES
MIL-P-4861 Revision C:1991 PACKING, PREFORMED, RUBBER PACKAGING OF
MIL-G-49140 Base Document:1977 GENERATOR, DIRECT CURRENT G67((/G
HH-P-151 Revision F:1985 PACKING; RUBBER-SHEET, CLOTH-INSERT
MIL-H-21660 Revision A:1992 HOOK, THRUST, JATO - 1000 POUNDS NOMINAL THRUST
MIL-T-55570 Base Document:1967 TEST SET, ELECTRONIC CIRCUIT PLUG IN UNIT AN/ARM-87 ( ) (UNIT OF)
MIL B 17896 : C
MIL-S-28600 Revision A:1976 SORBENTS, FLOATING (FOR OIL SPILL REMOVAL)
MIL-A-52318 Revision A:1971 ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY
MIL-C-14518 Revision E:1992 CONNECTOR, BRIDLE LINE: SHEAVE TYPE
MIL-I-22110 Revision C:1985 INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER
MIL-G-28554 Revision C:1988 GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF
AA-D-001918 Base Document:1975 DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE
MIL-S-3443 Revision G:1993 SHOTGUN, 12 GAGE, RIOT TYPE
MIL-E-16298 Revision D:1989 ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF
MIL-S-22783 Revision C:1972 SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE)
MIL C 55116 : B CONNECTOR, MINIATURE AUDIO, FIVE PIN
MIL-P-116 Revision J:1988 PRESERVATION, METHODS OF
GGG-T-00570 Revision A:1965 TORCH KIT, SOLDERING (PROPANE GAS)
MIL-R-25410 Revision G:1991 REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING
MIL-B-48056 Base Document:1972 BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION
MIL-D-16791 Revision G:1990 DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC)
MIL-M-18058 Revision G:1990 MACHINERY, METAL & WOODWORKING PACKAGING OF
MIL-E-15330 Revision D:1977 EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY)
MIL B 85036 : A BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS
MIL-T-52340 Revision B:1991 TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60
MIL-W-45562 Revision C:1992 WELDING AND SOLDERING EQUIPMENT, SUPPLIES AND ACCESSORIES, PACKAGING OF
MIL-P-49115 Revision A:1977 PLATOON EARLY WARNING SYSTEM AN/TRS-2()
MIL S 24656 : 0
MIL-B-3865 Revision D:1990 BLOCKS, ROPE, TACKLE: PACKAGING OF
L E 00530 : B ENVELOPE, TRANSPARENT
MIL-T-10767 Revision F:1968 TOWER (COMPONENTS OF)
TT S 001543 : A SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES)
MIL S 3405 : B SURVEYING SET PLANETABLE, SET 8 PACKAGING OF
MMM-A-105 Base Document:1967 ADHESIVE AND SEALING COMPOUNDS CELLULOSE NITRATE BASE SOLVENT TYPE
PPP-B-665 Revision D:1972 BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS
GG-D-600 Revision D:1982 DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS
SS J 570 : B NOTICE 1 JOINT COMPOUNDS AND TAPE, WALLBOARD (FOR GYPSUM WALLBOARD CONSTRUCTION)
MIL-A-49186 Base Document:1979 ADAPTER, TONE-SIGNALLING TA-977()/PT
MIL-V-18318 Revision B:1966 VALVE, PRESSURE REGULATING, OXYGEN SYSTEM
AA-S-00300 Revision A Interim Revision:1967 SHELF, FILING
MIL-C-10085 Revision E:1977 CUTTERS, PHOTOGRAMMETRIC, SLOTTED-TEMPLATE: HAND-OPERATED
MIL L 25370 : E LIFE PRESERVER INFLATING ASSEMBLY, MA-1
MIL-A-55147 Revision B:1970 AMPLIFIER-POWER SUPPLY GROUP OA-3633()/GRC
PPP-P-1877 Revision A:1977 PACKAGING AND PACKING OF WOOD OFFICE FURNITURE
GGG-H-00110 Base Document:0196 HANDLING TOOL, SHEET MATERIAL (VACUUM TYPE)
MIL-I-2925 Revision B:1967 INDICATOR, CARBON DIOXIDE, CHEMICAL ABSORPTION TYPE, PORTABLE
LLL-F-00550 Base Document:1964 FORK AND SPOON, PICNIC (WOOD)
DDD-C-001559 Base Document:1969 CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING
UU B 43 : D NOTICE 1 BAG, PAPER, WASTE-RECEPTACLE
MIL P 2693 : C PACKING MATERIAL, COLD STORAGE DOOR GASKETING, NONWATERTIGHT
MIL-T-2487 Revision B:1975 TEST SET, TS&27()-TSM
SS-C-266 Revision F:1973 CHALK, MARKING, WHITE AND COLORED
MIL-L-52413 Revision B:1990 LIFE PRESERVER, YOKE, ORAL INFLATION, TRAPPED AIR TYPE, DESIGN 9008
MIL-A-14053 Revision C:1977 ANTENNA AT-450( )/ARC
GG-S-1343 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
MIL-F-26862 Revision B:1970 FIBERBOARD, SOLID, NON-CORROSIVE, FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS
MIL-A-55368 Base Document:1972 AIRBORNE DATA ANNOTATION SYSTEM AN/AYA-10()
MIL B 81391 : NOTICE 1 BAG, WATERVAPORPROOF, ONE FACE TRANSPARENT, FOR INTERIOR PACKAGING
MIL S 55507 : E (2) SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT), PACKAGING OF
TT S 00230 : C SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES)
MIL B 29361 : 0 BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR
MIL-R-17729 Revision C:1972 RESPIRATOR OUTFIT, SUPPLIED-AIR TWO-MAN
HH-G-76 Revision C:1970 GASKET, ASBESTOS METALLIC CLOTH
MIL-D-43699 Revision C:1987 DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES)
GG-D-1958 Base Document:1975 DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED)
MIL-R-8791 Revision D:1982 RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN
L-P-1221 Revision A:1971 PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE-RUBBER, DRAIN)
AA-S-130 Revision B:1991 SCREENS, BEDSIDE, ALUMINUM
UU-B-340 Revision A:1973 BINDER, LOOSE LEAF, FLEXIBLE PRONG
MIL-P-14313 Revision D:1972 PISTOL AND REVOLVERS, PACKAGING OF
FF-T-1813 Base Document:1973 TACK
MIL-P-19152 Revision A:1974 PACKINGS, HYDRAULIC, HIGH PRESSURE(FOR HYDROPNEUMATIC SYSTEMS)
MIL S 53012 : NOTICE 2 SUSPENSION KIT, 6 INCH HOSELINE
MIL-P-40619 Revision B:1991 PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS)
MIL-C-44009 Revision A:1982 CHARGER, BATTERY, PP-7562/U
PPP-C-1797 Revision A:1982 CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM
PPP-P-0015 Revision D:1970 PACKAGING AND PACKING OF STORAGE CABINETS, WARDROBES AND CLOTHING LOCKERS, METAL
MIL-P-12808 Revision F:1991 PLUMBING FIXTURES AND ACCESSORIES, PACKAGING OF
MIL B 131 : H BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE
DOD P 24583 : (1) PACKING MATERIAL, GRAPHITIC, BRAIDED YARN (METRIC)
MIL-T-49117 Base Document:1977 TEST SET, RECEIVER TS-3565( )/TRS-2
MIL-T-49110 Base Document:1977 TELEPHONE SET TA-838 ()/TT
MIL-C-49085 Base Document:1976 CHARGER, BATTERY PP-7311/PAS-7
MIL M 17191 : D MOUNT, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE
MIL-T-55369 Base Document:1972 TEST SET, RADIO TS-1588 ( ) /AC
MIL-B-2424 Revision D:1983 BLOCK AND TACKLE: WITH LOAD LOCKING DEVICE
L-P-511 Base Document:1964 PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING
MIL-F-49183 Base Document:1978 FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR
L-T-776 Revision A:1966 TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN)
GG-P-725 Revision B:1978
MIL-P-20628 Revision B:1971 PUTTY, SEALING (FOR BOLTED STEEL STORAGE TANKS)
PPP-P-1892 Base Document:1974 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF
MIL-B-208 Revision D:1970 BATTERY, STORAGE, LEAD ACID, AUTOMOTIVE AND NAVY PORTABLE (EXCEPT AIRCRAFT), PACKAGING AND PACKING OF
MIL-R-24169 Revision B:1982 REGULATOR, AIR DEMAND, SINGLE HOSE, DIVER 5
MIL J 5513 : C JOINT, HYDRAULIC SWIVEL
MIL-B-30510 Revision B:1983 BLOCK AND TACKLE SET, LINEMAN'S, WITH SNUBBING HOOK
PPP P 001946 : NOTICE 1 PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE
MIL R 2765 : D RUBBER SHEET, STRIP, EXTRUDED AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT
MIL-C-50709 Base Document:1971 COPPER BASE SINTERED BARS (OIL PREGNATED)
KKK-T-728 Revision A:1973 TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY
MIL-S-2244 Revision A:1967 SLEEVE, WIRE SPLICING, SINGLE TUBE, GENERAL SPECIFICATION FOR
MIL-R-52002 Revision A:1971 RACK ASSEMBLY, CONE, AIRPORT MARKER LIGHT
MIL V 8622 : B VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING
GG-S-1344 Revision A:0197 STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE)
GG-E-651 Revision C:1975 ERASER, BLACKBOARD
UU-P-680 Revision A:1964 PORTFOLIO, DOUBLE-POCKET, PRESENTATION
MIL G 18498 : C GLASS SET, WATER GAGE, FLAT, PLAIN. HIGH PRESSURE STEAM (GLASS, MICA SHIELD, SPACERS, & GASKETS)
FF-T-791 Revision B:1967 TURNBUCKLE
MIL-C-538 Revision F:1975 COMPARATOR, COLOR
L-P-389 Revision A:1964 PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION
MIL-D-52842 Revision A:1981 DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED
MIL-I-25135 Revision E:1984 INSPECTION MATERIALS, PENETRANTS
MIL-C-17671 Revision F:1989 CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4
SAE MA 2150 : 2015 CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC
L-P-394 Revision B:1968 PLASTIC MOLDING MATERIAL (PROPYLENE PLASTICS, INJECTION AND EXTRUSION)
MIL-C-58104 Revision A:1983 COVER, PROTECTIVE FOR PARTS AND EQUIPMENT
SAE AS 13572 : 2014 SPRINGS, HELICAL, COMPRESSION AND EXTENSION
ASTM F 1348/F1348M : 1991 : R2013 Standard Specification for Pneumatic Rotary Descaling Machines

MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
PPP-B-636 Revision J:1981 BOX, SHIPPING, FIBERBOARD
PPP-F-320 Revision D:1970 FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES
FED-STD-123 Revision H:2007 MARKING FOR SHIPMENT (CIVIL AGENCIES)
FF-N-105 Revision B:1971 NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT
PPP-B-638 Revision B:1975 BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF
PPP-B-621 Revision D:1981 BOXES, WOOD, NAILED AND LOCK CORNER
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES

View more information
£17.08
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.