IEC 61300-3-10:2006
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force
|
EN 61300-2-18:2005
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
|
EN 61300-2-1:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
|
EN 61300-3-4:2013
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
|
EN 60794-2:2017
|
Optical fibre cables - Part 2: Indoor cables - Sectional specification
|
IEC 61300-3-16:2003
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
|
EN 61300-2-17:2011
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
|
EN 60793-2-50:2016
|
Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
|
EN 61300-2-2:2009/corrigendum:2009
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
|
IEC 61300-2-1:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
|
IEC 61300-2-12:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
|
EN 61300-2-6:2011
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
|
EN 61300-2-22:2007
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
|
EN 61300-2-44:2013
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
|
IEC 61300-2-17:2010
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
|
IEC 61753-1:2007
|
Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
|
EN 61753-1:2007
|
Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards
|
EN 61300-3-23:1998
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface
|
EN 61755-2-2 : 2006
|
FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 2-2: OPTICAL INTERFACE STANDARD SINGLE MODE ANGLED PHYSICALLY CONTACTING FIBRES
|
IEC 61300-3-34:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
|
IEC 61300-3-23:1998
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface
|
EN 61300-3-16:2003
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
|
IEC 61300-2-18:2005
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
|
IEC 61300-2-22:2007
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
|
EN 60794-2-50 : 2008
|
OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
|
IEC 61300-3-6:2008
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
|
IEC 61300-3-15:2006
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
|
EN 61300-3-6:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
|
EN 61300-2-12:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
|
IEC 61300-3-4:2012
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
|
EN 61300-2-4:1997
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
|
EN 61300-3-15:2007
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface
|
EN 61755-1:2006/corrigendum:2006
|
FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE
|
IEC 61300-2-42:2014
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
|
IEC 60793-2-50:2015
|
Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
|
IEC 61300-2-44:2013
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
|
IEC 60794-2:2017
|
Optical fibre cables - Part 2: Indoor cables - Sectional specification
|
IEC 61755-2-2:2006
|
Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres
|
IEC 61300-2-2:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability
|
IEC 61300-2-4:1995
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
|
EN 61300-2-42:2014
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
|
IEC 61754-15:2009
|
Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family
|
EN 61754-15:2009/AC:2014
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 15: TYPE LSH CONNECTOR FAMILY (IEC 61754-15:2009)
|
IEC 61300-2-19:2012
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
|
EN 61300-2-19:2013
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
|
IEC 61300-2-6:2010
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
|
EN 61300-3-34:2009
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
|
IEC 60794-2-50:2008
|
Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies
|
IEC 61755-1:2005
|
Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance
|
EN 61300-3-10:2007
|
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force
|