DIN EN ISO 13408-1:2015-12
Current
Current
The latest, up-to-date edition.
ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013)
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-01-2015
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Quality system elements
5 Aseptic process definition
6 Manufacturing environment
7 Equipment
8 Personnel
9 Manufacture of the product
10 Process simulation
11 Test for sterility
Annex A (informative) - Example of a flow chart
Annex B (informative) - Typical elements of an aseptic
process definition
Annex C (informative) - Examples of specific risks
Annex D (informative) - Comparison of classification of
cleanrooms
Annex E (informative) - Specification for water used
in the process
Annex F (informative) - Aseptic processing area
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 90/385/EEC on active implantable
medical devices
Annex ZB (informative) - Relationship between this
European Standard and the Essential Requirements of
EU Directive 93/42/EEC on medical devices
Annex ZC (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 98/79/EC on in vitro diagnostic
medical devices
Bibliography
This standard is included in DIN Handbook 406.
| DevelopmentNote |
Supersedes DIN EN 13824. (09/2011)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN ISO 13408-1:2015 | Identical |
| ISO 13408-1:2008 | Identical |
| DIN EN ISO 13408-7:2015-11 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS (ISO 13408-7:2012) |
| DIN EN ISO 13408-4:2011-09 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
| DIN HDBK 406 : 2ED 2016 | |
| DIN EN ISO 13408-5:2011-09 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| DIN EN ISO 16672:2015-12 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| DIN EN ISO 13408-2:2011-09 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: FILTRATION |
| DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| DIN EN ISO 13408-6:2013-07 | Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005 + Amd 1:2013) (includes Amendment A1:2013) |
| DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| ISO 13408-4:2005 | Aseptic processing of health care products — Part 4: Clean-in-place technologies |
| EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 14644-1:2016-06 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 1: CLASSIFICATION OF AIR CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-1:2015) |
| EN ISO 14698-1 : 2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN 60812:2015-08 (Draft) | ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 13485:2016-08 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| ISO 14698-2:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data |
| EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| EN ISO 13408-4:2011 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
| DIN EN ISO 14644-3:2006-03 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| DIN EN ISO 13408-6:2013-07 | Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005 + Amd 1:2013) (includes Amendment A1:2013) |
| EN ISO 13408-5:2011 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| ISO 14644-2:2015 | Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration |
| ISO 13408-2:2003 | Aseptic processing of health care products Part 2: Filtration |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 14644-5:2004 | Cleanrooms and associated controlled environments — Part 5: Operations |
| DIN EN ISO 14644-2:2016-05 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 2: MONITORING TO PROVIDE EVIDENCE OF CLEANROOM PERFORMANCE RELATED TO AIR CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-2:2015) |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| DIN EN ISO 14644-4:2003-06 | Cleanrooms and associated controlled environments - Part 4: Design, construction and start up (ISO 14644-4:2001) |
| DIN EN ISO 13408-2:2011-09 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: FILTRATION |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 13408-3:2006 | Aseptic processing of health care products Part 3: Lyophilization |
| DIN EN ISO 14644-5:2005-03 | Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) |
| ISO 14698-1:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| DIN EN ISO 13408-4:2011-09 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
| DIN EN ISO 13408-5:2011-09 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| EN ISO 14698-2:2003/AC:2006 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN-Fachbericht CEN ISO/TR 14969:2005-10 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| EN ISO 14644-5:2004 | Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) |
| ISO 14644-7:2004 | Cleanrooms and associated controlled environments — Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
| ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| EN ISO 13408-6:2011/A1:2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS (ISO 13408-6:2005/AMD 1:2013) |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| EN ISO 14644-2:2015 | Cleanrooms and associated controlled environments - Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (ISO 14644-2:2015) |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| ISO 13408-6:2005 | Aseptic processing of health care products Part 6: Isolator systems |
| EN ISO 14644-1:2015 | Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015) |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 13408-5:2006 | Aseptic processing of health care products Part 5: Sterilization in place |
| EN ISO 14644-3:2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| ISO 15223:2000 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied |
$265.65
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German
PDF - German
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.