12/30266170 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
Hardcopy , PDF
31-03-2014
English
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Test specimens
5 Conditioning of test specimens
6 Physical properties
7 Mechanical properties
8 Durability
9 Thermal properties
10 Other properties
Annex A (normative) - Determination of the modulus
of elasticity in bending and bending strength
of profiles
Bibliography
BS EN 15534-1.
Committee |
PRI/42
|
DocumentType |
Draft
|
Pages |
59
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 15534-1 : DRAFT 2012 | Identical |
ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
ENV 12038:2002 | Durability of wood and wood-based products - Wood-based panels - Method of test for determining the resistance against wood-destroying basidiomycetes |
EN ISO 1183-3 : 1999 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD |
EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
EN 322:1993 | Wood-based panels - Determination of moisture content |
EN 84:1997 | Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure |
EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
EN 152:2011 | Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method |
EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
EN 13823:2010+A1:2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN ISO 75-2:2013 | Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) |
EN ISO 877-2:2010 | Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009) |
ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
EN 323:1993 | Wood-based panels - Determination of density |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
ISO 472:2013 | Plastics Vocabulary |
EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
EN 117:2012 | Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method) |
ISO 877-2:2009 | Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass |
EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
EN 20105-A02 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993) |
ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
EN 1534:2010 | Wood flooring - Determination of resistance to indentation - Test method |
ISO 16869:2008 | Plastics Assessment of the effectiveness of fungistatic compounds in plastics formulations |
ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
ISO 178:2010 | Plastics Determination of flexural properties |
ASTM D 3273 : 2016 : REDLINE | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
CEN/TS 15676:2007 | Wood flooring - Slip resistance - Pendulum test |
CEN/TS 15083-2:2005 | Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi |
ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.