IEC 60751:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Industrial platinum resistance thermometers and platinum temperature sensors
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
27-01-2022
English - French
17-07-2008
IEC 60751:2008 specifies the requirements and temperature/resistance relationship for industrial platinum resistance temperature sensors later referred to as "platinum resistors" or "resistors" and industrial platinum resistance thermometers later referred to as "thermometers" whose electrical resistance is a defined function of temperature. Values of temperature in this standard are in terms of the International Temperature Scale of 1990, ITS-90. Temperatures in degrees Celsius are denoted by the symbol t, except in Table 1 where the full nomenclature t90/°C is used. The standard covers resistors or thermometers for all or part of the temperature range 200 °C to +850 °C with different tolerance classes, which may cover restricted temperature ranges. This second edition cancels and replaces the first edition published in 1983, amendment 1 (1986) and amendment 2 (1995). It constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows: While the temperature/resistance relationship in 4.2 remains unchanged, there are several changes in the other chapters. Most important are: tolerance classes follow a new scheme; tolerance acceptance test is included; hysteresis test is included; several changes in the individual tests; appendices are deleted.
Committee |
TC 65/SC 65B
|
DevelopmentNote |
Supersedes RM.AERO 80121. (05/2015) Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
Pages |
41
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
OVE/ONORM EN 60751 : 2009 | Identical |
NEN EN IEC 60751 : 2008 | Identical |
I.S. EN 60751:2008 | Identical |
SAC GB/T 30121 : 2013 | Identical |
UNE-EN 60751:2008 | Identical |
BS EN 60751:2008 | Identical |
EN 60751:2008 | Identical |
UNE-EN 60751:1996 | Identical |
PNE-prEN 60751 | Identical |
DIN IEC 60751:1990-12 | Identical |
UNE 20751:1993 | Identical |
BS 1904:1984 | Identical |
PN EN 60751 : 2009 | Identical |
NEN 10751 : 95 AMD 2 1995 | Identical |
NF EN 60751 : 2008 | Identical |
DIN EN 60751:2009-05 | Identical |
CEI EN 60751 : 2009 | Identical |
NF EN 1434-2 : 2016 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS EN 60068-3-7:2002 | Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load) |
12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
15/30291038 DC : 0 | BS ISO 19291 - TESTING OF LUBRICANTS - TRIBOLOGICAL TEST IN THE TRANSLATORY OSCILLATION APPARATUS - DETERMINATION OF TRIBOLOGICAL QUANTITIES FOR OILS AND GREASES IN THE TRANSLATORY OSCILLATION APPARATUS |
CSA C900.5 : 2013 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
NF EN 1434-4 : 2016 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
16/30312922 DC : 0 | BS ISO 18888 - GAS TURBINE COMBINED CYCLE POWER PLANTS THERMAL PERFORMANCE TESTS |
14/30291768 DC : 0 | BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
I.S. EN 61987-1:2007 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
PD ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
14/30291756 DC : 0 | BS EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
BS EN 60068-3-6:2002 | Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers |
PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
IEC 60350-2:2017 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
BS ISO 4625-1 : 2004 AMD 16196 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
16/30312501 DC : 0 | BS ISO 19618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT METHOD FOR NORMAL SPECTRAL EMISSIVITY USING BLACKBODY REFERENCE WITH AN FTIR SPECTROMETER |
IP 527 : 2015 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF LOW-TEMPERATURE CONE PENETRATION OF LUBRICATING GREASES |
PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
AAMI ISO 11140-4 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
CEI EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD) |
BS ISO 13737:2004 | Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature cone penetration of lubricating greases |
EN 60350-2:2018 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
ONORM EN ISO 18472 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
I.S. EN ISO 15970:2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
OIML R 75-1 : 2002 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
ISO 6182-1:2014 | Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
NF EN 60947-8 : 2003 AMD 2 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES |
I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
ISO 19291:2016 | Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus |
BS EN 1434-1 : 2015 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
NF EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
ASTM D 5771 : 2017 : REDLINE | Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method) |
EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
PD CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete. Internal structural damage |
BS EN ISO 4625-1:2006 | Binders for paint and varnishes. Determination of softening point Ring-and-ball method |
IEC 60068-3-5:2018 RLV | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
EN 12953-11:2003 | Shell boilers - Part 11: Acceptance tests |
IEC 60068-3-6:2018 RLV | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
EN 12259-1:1999 + A1:2001/A3:2006 | FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 1: SPRINKLERS |
EN 60947-8:2003/A2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
NF EN 285 : 2016 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
DIN EN 14705:2005-10 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers; German version EN 14705:2005 |
EN 60068-3-6:2002 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
12/30248648 DC : DRAFT AUG 2012 | BS EN 16442 - CONTROLLED ENVIRONMENT STORAGE CABINET FOR DISINFECTED THERMOLABILE ENDOSCOPES |
PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
16/30339586 DC : 0 | BS EN 60068-3-6 - ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
I.S. EN 11140-4:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
99/124125 DC : DRAFT NOV 1999 | BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS |
BS EN 16242:2012 | Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
02/121895 DC : DRAFT APR 2002 | BS EN 13060 - SMALL STEAM STERILIZERS |
14/30291759 DC : 0 | BS EN 1434-5 - HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
17/30309582 DC : 0 | BS EN 60350-2 ED 2.0 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
DIN EN ISO 18472:2006-10 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
DIN EN ISO 15970:2014-09 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
06/30160085 DC : 0 | BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
BS EN 60534-2-3:2016 | Industrial-process control valves Flow capacity. Test procedures |
BS ISO 17714:2007 | Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
AAMI ISO 11140-5 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
PREN 12599 : DRAFT 2010 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
ASTM E 3137/E3137M : 2017 | Standard Specification for Heat Meter Instrumentation |
AAMI ISO 11140-4 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
NF EN 16442 : 2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
OIML R 84 : 2003 | PLATINUM, COPPER, AND NICKEL RESISTANCE THERMOMETERS (FOR INDUSTRIAL AND COMMERCIAL USE) |
I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
BS EN 1434-2 : 2015 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
I.S. EN 60068-3-5:2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
BS EN ISO 18472:2006 | Sterilization of health care products. Biological and chemical indicators. Test equipment and methods |
EN ISO 18472:2006 | Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO 18472:2006) |
I.S. EN 60068-3-7:2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD) |
I.S. EN IEC 60068-3-5:2018 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 1434-1:2015 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
EN 1434-2:2015 | Heat meters - Part 2: Constructional requirements |
EN IEC 60068-3-6:2018/AC:2018-05 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
OIML R 75-2 : 2002 | HEAT METERS - PART 2: TYPE APPROVAL TESTS AND INITIAL VERIFICATION TESTS |
IEC 60068-3-5 REDLINE : 2.0 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
PREN 17066-1 : DRAFT 2016 | INSULATED MEANS OF TRANSPORT FOR TEMPERATURE SENSITIVE GOODS - REQUIREMENTS AND TESTING - PART 1: CONTAINER |
IEC 60737:2010 | Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods |
UNE-EN 1434-2:2016 | Heat meters - Part 2: Constructional requirements |
IEC PAS 61987-1:2002 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
I.S. EN 60947-8:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV)) |
DIN EN 15758 E : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
DIN EN 16242:2013-03 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
DIN EN 14597:2015-02 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
DIN EN 15758:2010-12 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects |
BS EN 12599:2012 | Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems |
DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
I.S. EN 14597:2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
I.S. EN 16242:2012 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
I.S. EN 12599:2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
I.S. EN ISO 4892-1:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
DIN EN ISO 4625-1:2006-04 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
VDI 3786 Blatt 3:2012-10 | Environmental meteorology - Meteorologial measurements - Air temperature |
VDI/VDE 3512 Blatt 2:2017-03 | Temperature measurement for building automation - Temperature sensors, temperature sensing elements and their measurement parameters |
VDI 3786 Blatt 4:2013-06 | Environmental meteorology - Meteorological measurements - Air humidity |
VDI/VDE 3512 Blatt 4:2017-03 | Temperature measurement for building automation - Testing of temperature sensors |
OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
BS EN 60350-2 : 2013 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE |
CEI EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
DIN EN ISO 15970 E : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
BS ISO 19291:2016 | Lubricants. Determination of tribological quantities for oils and greases. Tribological test in the translatory oscillation apparatus |
BS IEC 60737:2010 | Nuclear power plants. Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit). Characteristics and test methods |
ISO 8310:2012 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank thermometers on board marine carriers and floating storage |
CEI EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
I.S. CEN TR 15177:2006 | TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
BS ISO 19618:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer |
I.S. EN IEC 60068-3-6:2018 COR 2018 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS (IEC 60068-3-6:2018) |
02/103093 DC : DRAFT APR 2002 | BS 12390-9 - TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
BS EN ISO 15970:2014 | Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor |
EN IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
DIN EN 16442 E : 2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
NF ISO 14661 : 2000 AMD 1 2004 | THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
07/30170559 DC : DRAFT AUG 2007 | BS ISO 2314 - GAS TURBINES - ACCEPTANCE TESTS |
04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
10/30235574 DC : 0 | BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
BS ISO 11140-5:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators for Bowie and Dick-type air removal tests |
AAMI ISO 11140-5 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
BS ISO 15970 : 2008 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
BS EN 60068-3-5:2002 | Environmental testing. Guidance Confirmation of the performance of temperature chambers |
IEC 60068-3-5:2018 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
EN 13060:2014 | Small steam sterilizers |
I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
I.S. EN 1434-5:2015 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
PREN 1434-4 : DRAFT 2014 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
NF EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
DIN EN 1434-2:2016-02 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
I.S. EN 16442:2015 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
API 551 : 2016 | PROCESS MEASUREMENT |
DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
DIN EN 12259-1:2006-03 | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1: Sprinklers |
DIN EN 14705 E : 2005 | HEAT EXCHANGERS - METHOD OF MEASUREMENT AND EVALUATION OF THERMAL PERFORMANCES OF WET COOLING TOWERS |
DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN 1434-5:2015 | Heat meters Initial verification tests |
ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
IEC 60068-3-7:2001 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
EN 60068-3-7:2002 | Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) |
I.S. EN ISO 4625-1:2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
EN ISO 4625-1:2006 | Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004) |
ONORM EN ISO 4625-1 : 2006 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF SOFTENING POINT - PART 1: RING-AND-BALL METHOD |
I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
UNI EN 12599 : 2012 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
UNI EN 14597 : 2012 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
UNI EN 16242 : 2013 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
12/30244792 DC : 0 | BS ISO 8310 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK THERMOMETERS ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
08/30173520 DC : DRAFT FEB 2008 | BS EN 15758 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
PD CEN/TS 12390-9:2016 | Testing hardened concrete Freeze-thaw resistance with de-icing salts. Scaling |
PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
BS EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
CAN/CSA-ISO 11140-4:18 | CAN/CSA-ISO 11140-4:18 - Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (Adopted ISO 11140-4:2007, second edition, 2007-03-15) |
CSA C900.2 : 2013 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
16/30330536 DC : 0 | BS EN ISO 18472 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
PREN 1434-2 : DRAFT 2014 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
DIN 43735:2011-06 | PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES |
BS EN 60947-8:2003 | Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
04/30112930 DC : DRAFT APR 2004 | IEC 61987-1 ED.1 - INDUSTRIAL PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 1: MEASURING EQUIPMENT WITH ANALOGUE AND DIGITAL OUTPUT |
16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
14/30295943 DC : 0 | BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
14/30312597 DC : 0 | BS EN 62828-3 ED.1 IEC 62828-3 ED.1 - REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 3: SPECIFIC PROCEDURES FOR TEMPERATURE TRANSMITTERS |
PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
BS ISO 2314:2009 | Gas turbines. Acceptance tests |
UNE-EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
10/30219217 DC : 0 | BS ISO 6487 - ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
DIN EN 12405-3 E : 2016 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
BS EN 61987-1:2007 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Measuring equipment with analogue and digital output |
DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
09/30165791 DC : 0 | BS IEC 60737 - NUCLEAR POWER PLANT - INSTRUMENTATION IMPORTANT TO SAFETY - TEMPERATURE SENSORS (INCORE AND PRIMARY COOLANT CIRCUIT): CHARACTERISTICS AND TEST METHODS |
BS ISO 6487 : 2015 | ROAD VEHICLES - MEASUREMENT TECHNIQUES IN IMPACT TESTS - INSTRUMENTATION |
DIN EN 16442:2015-05 | CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES |
UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
15/30330287 DC : DRAFT AUG 2015 | BS EN 60068-3-5 - ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
I.S. EN 60068-3-6:2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
UNE-EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
S.R. CEN/TS 12390-9:2016 | TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE WITH DE-ICING SALTS - SCALING |
ISO 13737:2004 | Petroleum products and lubricants Determination of low-temperature cone penetration of lubricating greases |
16/30348307 DC : 0 | BS EN 17066-1 - INSULATED MEANS OF TRANSPORT FOR TEMPERATURE SENSITIVE GOODS - REQUIREMENTS AND TESTING - PART 1: CONTAINER |
17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
DIN EN 1434-5:2016-02 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
IEC 60068-3-6 REDLINE : 2.0 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
DIN EN 1434-1:2016-02 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
UNE-EN 13060:2015 | Small steam sterilizers |
ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
ISO 18472:2006 | Sterilization of health care products Biological and chemical indicators Test equipment |
EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
I.S. EN ISO 18472:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
IEC 60068-3-6:2018 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers |
I.S. CEN TS 12390-9:2006 | TESTING HARDENED CONCRETE - PART 9: FREEZE-THAW RESISTANCE - SCALING |
UNE-EN 1434-1:2016 | Heat meters - Part 1: General requirements |
UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
DIN EN 14597 E : 2015 | TEMPERATURE CONTROL DEVICES AND TEMPERATURE LIMITERS FOR HEAT GENERATING SYSTEMS |
DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
DIN EN ISO 4892-1:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
BS EN ISO 11140-4:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
IEC 61987-1:2006 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
IEC 60947-8:2003+AMD1:2006+AMD2:2011 CSV | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
BS EN 867-4:2001 | Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
BS EN 14705:2005 | Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers |
UNE-EN 16242:2014 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
ISO 4625-1:2004 | Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method |
BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
ISO 6182-9:2005 | Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles |
DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
BS EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 6182-10:2014 | Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers |
BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
BS EN 15758:2010 | Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
UNE-EN 15758:2011 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
UNE-EN ISO 4892-1:2017 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
ISO 15970:2008 | Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor |
EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
EN 14597:2012 | Temperature control devices and temperature limiters for heat generating systems |
EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
EN 16242:2012 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
EN 14705:2005 | Heat exchangers - Method of measurement and evaluation of thermal performances of wet cooling towers |
EN 15758:2010 | Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects |
EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
EN 16442:2015 | Controlled environment storage cabinet for processed thermolabile endoscopes |
BS ISO 8310:2012 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank thermometers on board marine carriers and floating storage |
PREN 1434-5 : DRAFT 2014 | HEAT METERS - PART 5: INITIAL VERIFICATION TESTS |
DIN ISO 17714:2008-06 | METEOROLOGY - AIR TEMPERATURE MEASUREMENTS - TEST METHODS FOR COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND DEFINING IMPORTANT CHARACTERISTICS |
ISO 18888:2017 | Gas turbine combined cycle power plants — Thermal performance tests |
DKD-R 5-6 : 2008 | |
BS 2000-527(2004) : 2004 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-527: PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF LOW-TEMPERATURE CONE PENETRATION OF LUBRICATING GREASES |
I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
06/30151216 DC : DRAFT JUN 2006 | |
07/30127284 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
DD CEN/TS 12390-9:2006 | Testing hardened concrete Freeze-thaw resistance. Scaling |
BS ISO 18888:2017 | Gas turbine combined cycle power plants. Thermal performance tests |
CSA C900.4 : 2013 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
ISO 2314:2009 | Gas turbines — Acceptance tests |
API MPM CH7.5 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.5: TEMPERATURE DETERMINATION - AUTOMATIC TANK TEMPERATURE MEASUREMENT ONBOARD MARINE VESSELS CARRYING REFRIGERATED HYDROCARBON AND CHEMICAL GAS FLUIDS |
UNI EN 15758 : 2010 | CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
UNI EN ISO 15970 : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
CSA C900.1 : 2013 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 60534-2-3:2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
ISO 19618:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer |
ISO 17714:2007 | Meteorology Air temperature measurements Test methods for comparing the performance of thermometer shields/screens and defining important characteristics |
EN 1434-1:2015 | Heat meters - Part 1: General requirements |
AAMI ISO 18472 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
I.S. EN 60350-2:2018 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
I.S. EN 1434-2:2015 | HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
FD X07 029-1 : 2002 FD | METROLOGY - CALIBRATION AND VERIFICATION PROCEDURE FOR THERMOMETERS - PART 1: CALIBRATION AND VERIFICATION PROCEDURE FOR PROBES AND RESISTANCE THERMOMETERS |
CAN/CSA-ISO 11140-5:18 | CAN/CSA-ISO 11140-5:18 - Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests (Adopted ISO 11140-5:2007, second edition, 2007-03-15) |
EN 1434-5:2015 | Heat meters - Part 5: Initial verification tests |
UNE-EN 1434-5:2016 | Heat meters - Part 5: Initial verification tests |
ISO 6487:2015 | Road vehicles — Measurement techniques in impact tests — Instrumentation |
DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN 12259-1:1999 | Fixed firefighting systems. Components for sprinkler and water spray systems Sprinklers |
BS EN 12953-11:2003 | Shell boilers Acceptance tests |
UNE-EN 14597:2014 | Temperature control devices and temperature limiters for heat generating systems |
EN ISO 15883-1:2009/A1:2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014) |
NF EN 60068-3-7 : 2002 | ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND TEST B (WITH LOAD) |
EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
EN 61987-1:2007 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
EN 60068-3-5:2002 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
EN 12405-3 : 2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
UNE-EN 60350-2:2014 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
IEC 61298-1:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations |
IEC 61152:1992 | Dimensions of metal-sheathed thermometer elements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.