• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 7807 : 2012

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
Available format(s)

Hardcopy , PDF

Superseded date

24-08-2020

Language(s)

English

Published date

15-12-2012

CONTAINED IN VOL. 05.05, 2018 Defines the determination of the boiling range distribution of petroleum products.

1.1This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538°C (1000°F) or lower at atmospheric pressure as measured by this test method. This test method is limited to samples having a boiling range greater than 55°C (100°F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature.

1.1.1The applicable sulfur concentration range will vary to some extent depending on the boiling point distribution of the sample and the instrumentation used; however, in most cases, the test method is applicable to samples containing levels of sulfur above 10 mg/kg.

1.2This test method requires the use of both FID and SCD for detection. The hydrocarbon simulated distillation data obtained from the FID signal should be performed according to Test Method D2887.

1.3The test method is not applicable for analysis of petroleum distillates containing low molecular weight components (for example, naphthas, reformates, gasolines, crude oils). Materials containing heterogeneous components (for example, alcohols, ethers, acids or esters) or residue are not to be analyzed by this test method. See Test Methods D3710, D7096, D5307, D7169, or D7500.

1.4This test method does not purport to identify all sulfur species in a sample. The detector response to sulfur is equimolar for all sulfur compounds within the scope (1.1) of this test method. Thus, unidentified sulfur compounds are determined with equal precision to that of identified substances. Total sulfur content is determined from the total area of the sulfur detector.

1.4.1This test method uses the principles of simulated distillation methodology.

1.5The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 02
DocumentType
Test Method
Pages
14
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 6300 : 2013 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 1160 : 2012 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 6299 : 2010 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6300 : 2014 : REV A : EDT 1 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6299 : 2013 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 3120 : 2008 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6299 : 2017 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5623 : 2019 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 6299 : 2017 : REV B Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6300 : 2017 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6299 : 2009 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E 1510 : 1995 : R2013 : EDT 1 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 7096 : 2016 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D 6300 : 2017 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6299 : 2013 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2887 : 2006 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2892 : 2011 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 5504 : 2012 : REDLINE Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 6352 : 2015 : REDLINE Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 6352 : 1998 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176C by Gas Chromatography
ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6299 : 2010 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6300 : 2016 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 5623 : 1994 : R2014 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 6300 : 2004 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6352 : 2014 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2892 : 1999 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 2892 : 2018 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 7500 : 2015 : R2019 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
ASTM D 1160 : 2013 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 7169 : 2020 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D 7169 : 2016-11 TEST METHOD FOR BOILING POINT DISTRIBUTION OF SAMPLES WITH RESIDUES SUCH AS CRUDE OILS AND ATMOSPHERIC AND VACUUM RESIDUES BY HIGH TEMPERATURE GAS CHROMATOGRAPHY
ASTM D 6300 : 2019 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2887 : 1999 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2892 : 2010 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 2887 : 2006 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4307 : 1999 : R2004 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6300 : 2019 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 1160 : 2002 : REV A Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2887 : 2014 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7500 : 2010 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils<span class='unicode'>—</span>in Boiling Range from 100 to 735<span class='unicode'>°</span>C by Gas Chromatography
ASTM D 6300 : 2020 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 6299 : 2000 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2887 : 2001 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6299 : 2010 : EDT 2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7500 : 2008 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils<span class='unicode'>—</span>in Boiling Range from 100 to 735<span class='unicode'>°</span>C by Gas Chromatography
ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
ASTM D 1160 : 2006 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 6299 : 2016 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 1160 : 2018 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2892 : 2005 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6352 : 2003 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
ASTM D 6352 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 4626 : 1995 : R2005 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM E 1510 : 1995 : R2000 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 3120 : 2003 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6299 : 2019 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5623 : 1994 : R2009 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 6352 : 2004 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
ASTM D 6299 : 2000 : REV A Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6300 : 2006 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM E 1510 : 1995 : R2005 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 7169 : 2016 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D 5504 : 2008 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 1160 : 2015 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 4307 : 1999 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2887 : 2019 : REV A : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2892 : 2017 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6352 : 2004 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
ASTM D 2892 : 2016 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6300 : 2014 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2887 : 2001 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5307 : 1997 : R2007 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography (Withdrawn 2011)
ASTM D 7500 : 2015 : REDLINE Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
ASTM D 6300 : 2015 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 3120 : 2003 : REV A Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6300 : 1999 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 7169 : 2018 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D 5307 : 1997 : R2002 : EDT 1 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
ASTM D 2892 : 2018 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 2887 : 2016 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6299 : 2020 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4307 : 2017 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 2887 : 2008 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6299 : 2008 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2887 : 2018 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1160 : 2003 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2887 : 2012 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5623 : 1994 : R2004 : EDT 1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 1160 : 1999 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM E 1510 : 1995 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs
ASTM D 4626 : 1995 : R2019 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 7500 : 2014 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
ASTM D 6300 : 2013 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 6299 : 2002 : EDT 1 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 7169 : 2011 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D 6352 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 7169 : 2019 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2892 : 2017 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 5504 : 1998 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 7096 : 2010 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D 6300 : 2008 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2892 : 2019 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 4307 : 1999 : R2010 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 6300 : 2003 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2887 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6352 : 2004 : R2009 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography
ASTM D 6300 : 2007 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2887 : 2019 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2013 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2887 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3120 : 1996 : R2002 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 2887 : 2015 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4626 : 1995 : R2015 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 3710 : 1995 : R1999 : EDT 1 Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2887 : 2004 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4307 : 2017 : REDLINE Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 5504 : 2001 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 3120 : 2006 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 2892 : 2013 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6300 : 2002 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 5307 : 1997 Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
ASTM D 5504 : 2001 : R2006 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 4626 : 1995 : R2000 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 2892 : 2001 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 3120 : 2006 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5504 : 2012 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 6352 : 2002 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&#176C by Gas Chromatography
ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7096 : 2005 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D 2887 : 2002 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7169 : 2005 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D 6300 : 2016 : REV A Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 7500 : 2015 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
ASTM D 2892 : 2017-05 TEST METHOD FOR DISTILLATION OF CRUDE PETROLEUM (15-THEORETICAL PLATE COLUMN)
ASTM D 2622 : 2016 : REDLINE Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6299 : 2007 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2892 : 2015 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6299 : 2007 : EDT 1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 2892 : 2003 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 4626 : 1995 : R2010 Standard Practice for Calculation of Gas Chromatographic Response Factors
ASTM D 2887 : 2016 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3120 : 2008 : R2014 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 2892 : 2011 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 5623 : 1994 : R1999 : EDT 1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D 2887 : 2004 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6299 : 2017 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 4307 : 1999 : R2015 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
ASTM D 6300 : 2014 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D 7500 : 2012 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography
ASTM D 1160 : 2002 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
ASTM D 2887 : 2003 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2892 : 2003 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6352 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D 6299 : 2002 Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance
ASTM D 6352 : 2012 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.