• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 177 : 1990 : REV A : R1996

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

31-12-2010

1.1 The purpose of this practice is to present concepts necessary to the understanding of the terms "precision" and "bias" as used in quantitative test methods. This practice also describes methods of expressing precision and bias and, in a final section, gives examples of how statements on precision and bias may be written for ASTM test methods.

Note 1-The term "accuracy", used in earlier editions of Practice E177, embraces both precision and bias (see Section 20 and Note 4).

1.2 Informal descriptions of the concepts are introduced in the text as the concepts are developed, and appear in the following sections:

Section Terminology 3 Significance and Use 4 GENERAL CONCEPTS Test Method 5 Measurement Terminology 6 Observation 7 Test Determination 8 Test Result 9 SOURCES OF VARIABILITY Experimental Realization of a Test Method 10 Operator 11 Apparatus 12 Environment 13 Sample 14 Time 15 STATISTICAL CONCEPTS Accepted Reference Value 16 Statistical Control 17 Precision 18 Bias 19 Accuracy 20 Variation of Precision and Bias with Material 21 Variation of Precision and Bias with Sources of Variability 22 COMBINATIONS OF SOURCES OF VARIABILITY Repeatability and Laboratory Bias 23 Other Within-a-Single Laboratory Precisions 24 Reproducibility and Bias of the Test Method 25 Range of Materials 26 METHODS OF EXPRESSING PRECISION AND BIAS Indexes of Precision 27 Preferred Indexes of Precision for ASTM Test Methods 28 Preferred Statements of Bias for ASTM Test Methods 29 Elements of a Statement of Precision and Bias 30 STATEMENTS OF PRECISION AND BIAS Examples of Statements of Precision and Bias 31 APPENDIX Alphabetical List of Descriptions of Terms from the Text XI

1.3 This standard does not purport to address the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 11
DocumentType
Standard Practice
Pages
12
ProductNote
Reconfirmed 1996
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM D 3103 : 2020 Standard Test Method for Thermal Insulation Performance of Distribution Packages
ASTM D 7136/D7136M : 2020 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D 7682 : 2017 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM F 2082/F2082M : 2016 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM D 3492 : 2016 Standard Specification for Rubber Contraceptives (Male Condoms)
ASTM E 3151 : 2018 Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens
ASTM D 7043 : 2017 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM D 6463/D6463M : 2006 : R2020 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D 1331 : 2020 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
ASTM D 8314 : 2020 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
ASTM C 430 : 2017 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM D 5572 : 1995 : R2019 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM D 3908 : 2020 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM C 1215 : 2018 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM F 3299 : 2018 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P<inf>2</inf>O<inf >5</inf> Sensor)
ASTM C 50/C50M : 2013 : R2019 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM D 4254 : 2016 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D 7570 : 2017 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
ASTM D 3241 : 2020 : REV C Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1155 : 2010 : R2020 Standard Test Method for Roundness of Glass Spheres
ASTM E 2926 : 2017 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
ASTM D 8167/D8167M : 2018 : REV A Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D 7778 : 2015 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2402 : 2019 Standard Test Method for Mass Loss, Residue, and Temperature Measurement Validation of Thermogravimetric Analyzers
ASTM D 3307 : 2016 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
ASTM E 1782 : 2014 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E 766 : 2014(R2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM D3249 - 95(2019) Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 854 : 2014 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 7414 : 2018 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM C 273/C273M : 2020 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM D 7674 : 2014 : REV A Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
ASTM D 4632/D4632M : 2015 : REV A Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM F 3375 : 2019 Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
ASTM C 670 : 2015 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM E 2141 : 2014 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM E 111 : 2017 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM D 6480 : 2019 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
ASTM F 2569 : 2011 : R2019 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM B 923 : 2020 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM D 7466/D7466M : 2010 : R2015 : EDT 1 Standard Test Method for Measuring Asperity Height of Textured Geomembranes
ASTM C 394/C394M : 2016 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C 1363 : 2019 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D 5228 : 2016 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
ASTM D 6004 : 2020 Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
ASTM E 3098 : 2017 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys
ASTM D 4512 : 2003 : R2018 : EDT 1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D 8032 : 2020 Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
ASTM D 6657 : 2016 Standard Test Method for pH of Wet Blue and Wet White
ASTM F 1165 : 2020 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM D 8007 : 2015 : R2019 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
ASTM D 8161 : 2017 Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D 4968 : 2019 : REV A Standard Practice for Annual Review of Test Methods and Specifications for Plastics
ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E 1967 : 2019 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM D 3171 : 2015 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 465 : 2015 : R2020 Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
ASTM C 739 : 2017 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM D 5449/D5449M : 2016 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM E 3116 : 2018 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D 7779 : 2020 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM F 3139 : 2015 Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM C 1111 : 2010 : R2020 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM G 176 : 2003 : R2017 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM D 4164 : 2013 : R2018 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM D 8063 : 2018 Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
ASTM D 5556 : 2019 Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fatliquors and Softening Compounds
ASTM C 474 : 2015 : R2020 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
ASTM E 1601 : 2019 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM F 1868 : 2017 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
ASTM D 4797 : 2017 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM E 1927 : 1998 : R2018 Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM F 1884 : 2004 : R2018 Standard Test Methods for Determining Residual Solvents in Packaging Materials
ASTM D 8207 : 2018 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry (Withdrawn 2023)
ASTM F 1888 : 2009 : R2016 Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM F 2845 : 2014 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
ASTM E 2274 : 2016 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
ASTM D 7291/D7291M : 2015 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D 6464 : 2003 : REV A : R2017 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 2799 : 2013 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
ASTM E 1876 : 2015 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM D 7359 : 2018 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
ASTM D 4463/D4463M : 2019 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D 1425/D1425M : 2014 : R2020 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM D 3410/D3410M : 2016 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM G 65 : 2016 : EDT 1 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM D 6900 : 2010 : R2020 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
ASTM E 606/E606M : 2019 : EDT 1 Standard Test Method for Strain-Controlled Fatigue Testing
ASTM D 8182 : 2018 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
ASTM E 266 : 2017 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
ASTM D 8130 : 2017 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
ASTM F 1863 : 2016 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
ASTM D 7127 : 2017 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument (Withdrawn 2021)
ASTM E 2540 : 2016 : EDT 1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM C 1674 : 2016 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM C 557 : 2003 : R2017 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 7330 : 2015 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM D 7681 : 2011 : R2016 : EDT 1 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM G 98 : 2017 Standard Test Method for Galling Resistance of Materials
ASTM C 802 : 2014 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM G 141 : 2009 : R2013 Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM E 92 : 2017 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM E 1082 : 1990 : R2017 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C 1120/C1120M : 1998 : R2019 Standard Test Method for Wash Test of Asbestos (Withdrawn 2022)
ASTM B 795 : 2020 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
ASTM D 4533/D4533M : 2015 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 664 : 2018 : EDT 2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D 2013/D2013M : 2020 Standard Practice for Preparing Coal Samples for Analysis
ASTM E 1367 : 2003 : R2014 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM D 7047 : 2015 : EDT 1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
ASTM D 1412/D1412M : 2020 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C
ASTM E 2860 : 2020 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
ASTM D 7956/D7956M : 2016 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
ASTM F 2977 : 2020 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM F 2894 : 2019 Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM C 1234 : 2011 : R2019 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM G 73 : 2010 : R2017 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM D 4417 : 2021 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM F 387 : 2017 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM C 413 : 2018 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 2854 : 2009 : R2019 Standard Test Method for Apparent Density of Activated Carbon
ASTM C 1119/C1119M : 1990 : R2015 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes (Withdrawn 2021)
ASTM C 1819 : 2015 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM D 7624 : 2018 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 826 : 2014 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry (Withdrawn 2023)
ASTM B 975 : 2018 : EDT 1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM D 2809 : 2009 : R2017 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 6792 : 2020 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM D 3321 : 2019 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM G 72/G72M : 2015 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM F 1515 : 2015 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM E 2298 : 2018 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM C 1174 : 2020 Standard Guide for Evaluation of Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
ASTM E 398 : 2020 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM D 7639 : 2010 : R2018 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 4280 : 2018 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
ASTM D 2868 : 2017 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 5831 : 2017 Standard Practice for Screening Fuels in Soils
ASTM D 7811 : 2013 : R2017 Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM F 3022 : 2016 : EDT 1 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
ASTM F 1498 : 2008 : R2020 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM E 1710 : 2018 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM C 1285 : 2014 Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
ASTM F 1930 : 2018 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM F 1702 : 2010 : R2018 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM E 2627 : 2013 : R2019 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM E 2655 : 2014 : R2020 Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM E 1911 : 2019 Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester
ASTM C 179 : 2014 : R2019 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
ASTM E 1488 : 2012 : R2018 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
ASTM F 2055 : 2017 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
ASTM D 1043 : 2016 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D 6175 : 2003 : R2019 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D 5450/D5450M : 2016 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 1934 : 2020 Standard Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 292 : 2018 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM D 5017 : 2017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM G 109 : 2007 : R2013 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM D 7766/D7766M : 2016 Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM F 2961 : 2015 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM D 2866 : 2011 : R2018 Standard Test Method for Total Ash Content of Activated Carbon
ASTM E 1875 : 2020 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM D 6469 : 2020 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM C 534/C534M : 2020 : REV A Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
ASTM D 5766/D5766M : 2011 : R2018 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D 5994/D5994M : 2010 : R2015 : EDT 1 Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM D 8108 : 2020 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
ASTM D 2589/D2589M : 1988 : R2019 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber (Withdrawn 2022)
ASTM D 7584 : 2016 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
ASTM F 1632 : 2003 : R2018 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 4699 : 2003 : R2018 : EDT 1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D 7472 : 2019 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM C 471M : 2020 : REV A Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
ASTM D 6862 : 2011 : R2016 Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM E 1297 : 2018 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
ASTM D 7027 : 2020 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM D 5649 : 2015 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM D 8097 : 2017:EDT 1 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D 4735 : 2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
ASTM C 267 : 2020 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
ASTM D 1822 : 2013 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM F 1249 : 2020 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM D 1140 : 2017 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 8132/D8132M : 2017 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
ASTM E 2677 : 2020 Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
ASTM A 428/A428M : 2010 : R2019 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D 6742/D6742M : 2017 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM D 4318 : 2017 : EDT 1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D 7360 : 2016 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023)
ASTM C 165 : 2007 : R2017 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C 1720 : 2017 : EDT 1 Standard Test Method for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
ASTM D 7515 : 2019 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
ASTM E 2490 : 2009 : R2021 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM D 7471 : 2019 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
ASTM D 2947/D2947M : 1988 : R2019 Standard Test Method for Screen Analysis of Asbestos Fibers (Withdrawn 2022)
ASTM D 7011 : 2015 : R2019 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM E 810 : 2020 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM G 77 : 2017 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM E 2584 : 2020 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM E 1356 : 2008 : R2014 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023)
ASTM D 7521 : 2016 Standard Test Method for Determination of Asbestos in Soil
ASTM C 1419 : 2014 : R2020 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
ASTM F 218 : 2013 : R2020 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM D 5280 : 1996 : R2013 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM G 132 : 1996 : R2018 Standard Test Method for Pin Abrasion Testing
ASTM E 2931 : 2013 : R2019 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM D 4180 : 2013 : R2018 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D 7553 : 2015 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
ASTM C 1421 : 2018 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C 67/C67M : 2020 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM E 3063 : 2017 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
ASTM G 174 : 2004 : R2017 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM D 6037 : 2018 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
ASTM D 6576 : 2020 Standard Specification for Flexible Cellular Rubber Chemically Blown
ASTM D 5742 : 2016 Standard Test Method for Determination of Butane Activity of Activated Carbon
ASTM C 1274 : 2012 : R2020 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM E 2823 : 2017 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM D 3530 : 2020 Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM C 469/C469M : 2014 : EDT 1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM D 7744/D7744M : 2020 Standard Test Methods for Tensile Testing of High Performance Polyethylene Films
ASTM D 5178 : 2016 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 2166/D2166M : 2016 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D 3529 : 2016 Standard Test Methods for Constituent Content of Composite Prepreg
ASTM E 2269 : 2014 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM D 5681 : 2020 Standard Terminology for Waste and Waste Management
ASTM D 7304 : 2016 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
ASTM C 596 : 2018 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM D 2134 : 2019 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
ASTM C 1341 : 2013 : R2018 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
ASTM C 749 : 2015 : R2020 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D 6300 : 2020 : REV B Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 5349 : 2019 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated, Sulfated Oils and Fatliquors by Oven Method
ASTM C 1445 : 2013 : R2018 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
ASTM D 545 : 2019 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
ASTM D 2197 : 2016 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 7415 : 2018 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM F 1446 : 2020 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
ASTM D 6790/D6790M : 2016 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM D 3639/D3639M : 1992 : R2019 Standard Test Method for Classification of Asbestos by Quebec Standard Test (Withdrawn 2022)
ASTM F 2638 : 2018 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM C 1446 : 2019 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM C 473 : 2019 Standard Test Methods for Physical Testing of Gypsum Panel Products
ASTM E 2591 : 2007 : R2013 Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
ASTM D 4895 : 2018 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM F 1326 : 2002 : R2016 Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM D 3773/D3773M : 2010 : R2019 Standard Test Methods for Length of Woven Fabric
ASTM D 4058 : 1996 : R2020 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM E 430 : 2019 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM D 6631 : 2005 : R2019 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM E 2759 : 2010 : R2018 Standard Practice for Highway Traffic Monitoring Truth-in-Data
ASTM D 7818 : 2012 : R2016 Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
ASTM F 2980 : 2013 : R2017 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM D 4497 : 2010 : R2018 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) (Withdrawn 2021)
ASTM E 1323 : 2015 : R2020 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6132 : 2013 : R2017 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D 3465 : 2014 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM B 703 : 2017 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM C 1104/C1104M : 2019 Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM A 343/A343M : 2014 : R2019 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
ASTM D 3389 : 2016 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM F 3078 : 2015 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
ASTM D 3906 : 2019 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D 7469 : 2016 Standard Test Methods for End-Joints in Structural Wood Products
ASTM C 1124/C1124M : 1990 : R2015 Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021)
ASTM E 2448 : 2018 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
ASTM D 8131/D8131M : 2017 : EDT 1 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM D 4642 : 2004 : R2016 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM C 1663 : 2018 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
ASTM D 7905/D7905M : 2019 : EDT 1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 2863 : 2019 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D 1518 : 2014 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate (Withdrawn 2023)
ASTM E 119 : 2020 Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM F 3067 : 2014 Guide for Radial Loading of Balloon Expandable and Self Expanding Vascular Stents
ASTM C 1326 : 2013 : R2018 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM D 7748/D7748M : 2014 : EDT 1 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
ASTM D 7430/D7430M : 2020 Standard Practice for Mechanical Sampling of Coal
ASTM E 855 : 2008 : R2013 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D 5758 : 2001 : R2015 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM C 580 : 2018 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM D 4255/D4255M : 2020 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM C 1012/C1012M : 2018 : REV B Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM E 1354 : 2017 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5930 : 2017 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D 6281 : 2015 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM D 6761 : 2017 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM F 1284 : 2009 : R2016 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM E 526 : 2017 : EDT 1 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
ASTM C 1259 : 2015 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM E 660 : 1990 : R2015 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM C 586 : 2019 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
ASTM D 4513 : 2011 : R2017 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D 4179 : 2011 : R2017 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D 7332/D7332M : 2016 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite
ASTM D 7616/D7616M : 2011 : R2017 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D 6583 : 2013 : R2019 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
ASTM G 143 : 2003 : R2018 Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM E 2587 : 2016 Standard Practice for Use of Control Charts in Statistical Process Control
ASTM C 1121/C1121M : 2004 : R2015 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021)
ASTM E 2798 : 2019 Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
ASTM D 8278 : 2020 Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants
ASTM D 5329 : 2020 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
ASTM D 4365 : 2019 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
ASTM E 1574 : 1998 : R2014 Standard Test Method for Measurement of Sound in Residential Spaces
ASTM F 3189 : 2020 Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete
ASTM F 2837 : 2011 : R2018 Standard Test Method for Hot Compression Properties of Gasket Materials
ASTM C 550 : 2015 : R2020 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
ASTM D 4782 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D 3159 : 2020 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
ASTM D 4944 : 2018 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM F 3095 : 2017 : REV A Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
ASTM D 4685/D4685M : 2015 : R2020 Standard Test Method for Pile Fabric Abrasion
ASTM D 8069 : 2017 : REV A Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D 3124 : 1998 : R2019 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 6809 : 2020 : REV A Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 5528 : 2013 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 6475 : 2017 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM B 329 : 2020 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
ASTM C 187 : 2016 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM D 7708 : 2014 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM D 5379/D5379M : 2019 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM B 647 : 2010 : R2016 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D 5154/D5154M : 2018 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D 8067/D8067M : 2017 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
ASTM D 4821 : 2020 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D 8028 : 2017 Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
ASTM D 7964/D7964M : 2019 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM D 8352 : 2020 Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
ASTM D 6195 : 2003 : R2019 Standard Test Methods for Loop Tack
ASTM E 2551 : 2020 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E 1732 : 2019 : EDT 1 Standard Terminology Relating to Forensic Science
ASTM D 8019 : 2015 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM C 1327 : 2015 : R2019 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM F 3287 : 2017 : EDT 1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
ASTM C 1123/C1123M : 1990 : R2015 Standard Test Method for Compressibility and Recovery of Asbestos (Withdrawn 2021)
ASTM D 5357 : 2019 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM E 2282 : 2014 : R2019 Standard Guide for Defining the Test Result of a Test Method
ASTM E 646 : 2016 Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
ASTM C 1891 : 2020 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
ASTM F 2634 : 2015 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM C 363/C363M : 2016 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM F 3340 : 2018 Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
ASTM D 8040 : 2018 Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
ASTM E 3064 : 2016 Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
ASTM D 6493 : 2011 : R2015 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM E 2248 : 2018 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
ASTM G 156 : 2017 Standard Practice for Selecting and Characterizing Weathering Reference Materials
ASTM D 7918 : 2017 : REV A Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
ASTM C 1109 : 2010 : R2015 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 6090 : 2017 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
ASTM D 7565/D7565M : 2010 : R2017 Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM E 1695 : 2020 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM D 4253 : 2016 : EDT 1 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM C 1114 : 2006 : R2019 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM F 2157 : 2009 : R2018 Standard Specification for Synthetic Surfaced Running Tracks
ASTM C 794 : 2018 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM D 6772/D6772M : 2016 Standard Test Method for Dimensional Stability of Sandwich Core Materials
ASTM D 6913/D6913M : 2017 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F 3263 : 2017 Standard Guide for Packaging Test Method Validation
ASTM C 1182 : 2009(R2019) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM A 1038 : 2019 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM D 7983 : 2017 Standard Test Method for Shrinkage of Carpet Backing Fabrics
ASTM E 2832 : 2012 : R2017 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (R<inf>L-2</inf >)
ASTM D 5824 : 1998 : R2017 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM B 648 : 2010 : R2015 : EDT 1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D 1938 : 2019 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D 4 : 1986 : R2018 Standard Test Method for Bitumen Content
ASTM C 579 : 2018 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM G 122 : 2020 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents and Processes
ASTM C 1371 : 2015 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM C 1125 : 1989 : R2015 Standard Test Method for Penetration Index of Asbestos (Withdrawn 2021)
ASTM E 839 : 2011 : R2016 : EDT 1 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM E 1719 : 2012 : R2018 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry (Withdrawn 2023)
ASTM F 1717 : 2018 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
ASTM D 6166 : 2012 : R2016 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
ASTM D 1709 : 2016 : REV A : EDT 1 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 3364 : 1999 : R2019 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM E 2554 : 2018 : EDT 1 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
ASTM D 5795 : 2016 Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
ASTM D 6815 : 2009 : R2015 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM E 2792 : 2013 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM D 3479/D3479M : 2019 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM D 5147/D5147M : 2018 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
ASTM D 1353 : 2013 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM F 2150 : 2019 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products
ASTM D 7736 : 2019 : REV A Standard Test Method for Determination of Acids and Glycol Esters in Glycols
ASTM D 1214 : 2010 : R2020 Standard Test Method for Sieve Analysis of Glass Spheres
ASTM E 2714 : 2013 : R2020 Standard Test Method for Creep-Fatigue Testing
ASTM C 549 : 2018 Standard Specification for Perlite Loose Fill Insulation
ASTM D 4761 : 2019 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
ASTM E 28 : 2018 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
ASTM D 6150 : 2016 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
ASTM F 1514 : 2019 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM D 6671/D6671M : 2019 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM F 2826 : 2014 : R2018 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
ASTM F 2170 : 2019 : REV A Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM D 7202 : 2015 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 7245 : 2009 : R2014 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM B 886 : 2019 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
ASTM D 4780 : 2012 : R2017 : EDT 1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM E 1834 : 2018 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM D 6883 : 2017 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
ASTM F 2607 : 2008 : R2014 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM F 2476 : 2020 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO<inf >2</inf>TR) Through Barrier Materials Using an Infrared Detector
ASTM F 2828 : 2020 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
ASTM D 7591 : 2012 : R2017 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 6645 : 2018 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D 5158 : 1998 : R2019 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
ASTM F 3004 : 2013 : R2020 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
ASTM D 7372 : 2017 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D 4460 : 1997 : R2015 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM C 651 : 2020 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM D 6566 : 2018 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM D 1316 : 2020 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM F 608 : 2018 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
ASTM F 1334 : 2018 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
ASTM D 8289 : 2020 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite
ASTM D 6415/D6415M : 2006 : REV A : R2013 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 6886 : 2018 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM E 2480 : 2012 : R2017 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM C 704/C704M : 2015 : EDT 1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM F 3300 : 2018 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM E 1868 : 2010 : R2015 Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM D 6264/D6264M : 2017 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM F 2004 : 2017 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
ASTM D 7514 : 2014 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
ASTM D 7967 : 2016 Standard Test Method for Analysis of Chrome Content (as Cr<inf>2</inf>O<inf>3</inf>) in Wet Blue using Atomic Absorption
ASTM D 420 : 2018 Standard Guide for Site Characterization for Engineering Design and Construction Purposes
ASTM D 5504 : 2020 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM D 4567 : 2019 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D 2885 : 2020 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D 7234 : 2019 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D 2065 : 2003 : R2017 Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
ASTM D 953 : 2019 Standard Test Method for Pin-Bearing Strength of Plastics
ASTM D 6499 : 2018 Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products
ASTM C 1733 : 2020 Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM C 307 : 2018 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM E 3047 : 2016 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM D 5084 : 2016 : REV A Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM F 2516 : 2018 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM F 1802 : 2015 Standard Test Method for Performance Testing of Excess Flow Valves
ASTM C 1427 : 2016 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
ASTM E 2532 : 2009 : R2017 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM C 1501 : 2019 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM E 3039 : 2020 Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens
ASTM C 747 : 2016 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM E 2399/E2399M : 2019 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
ASTM E 2455 : 2006 : R2013 Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels (Withdrawn 2022)
ASTM G 32 : 2016 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM C 1519 : 2010 : R2017 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 7488 : 2011 : R2016 Standard Test Method for Open Time of Latex Paints
ASTM C 393/C393M : 2020 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM B 922 : 2020 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
ASTM D 4222 : 2020 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM D 5757 : 2011 : R2017 Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM F 2385 : 2015 : R2019 Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
ASTM D 1894 : 2014 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
ASTM E 262 : 2017 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
ASTM D 6740 : 2015 : R2019 Standard Test Method for Silanes Used in Rubber Formulations<brk/>(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM D 7426 : 2008 : R2013 Standard Test Method for Assignment of the DSC Procedure for Determining T<inf>g</inf > of a Polymer or an Elastomeric Compound (Withdrawn 2022)
ASTM D 7309 : 2020 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
ASTM C 459/C459M : 1997 : R2019 Standard Test Methods for Asbestos-Cement Flat Products (Withdrawn 2022)
ASTM D 6817/D6817M : 2017 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D 7607/D7607M : 2019 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
ASTM C 1606 : 2010 : R2018 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM D 698 : 2012 : EDT 2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM D 7843 : 2018 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
ASTM F 2878 : 2019 Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
ASTM D 3936 : 2021 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
ASTM D 4796 : 2017 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM C 1814/C1814M : 2020 Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
ASTM B 931 : 2014 : R2018 : EDT 1 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D 6525/D6525M : 2018 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D 4430 : 2000 : R2015 Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D 7248/D7248M : 2012 : R2017 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 7191 : 2018 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
ASTM D 8133 : 2021 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
ASTM F 2129 : 2019 : REV A Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
ASTM C 958 : 1992 : R2014 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM D 6460 : 2019 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D 8031 : 2016 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
ASTM F 3203 : 2019 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing
ASTM D 4481 : 2010 : R2015 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D 7477 : 2016 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
ASTM D 7816 : 2012 : R2016 Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
ASTM F 2466 : 2010 : R2018 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
ASTM E 1414/E1414M : 2021 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM E 2546 : 2015 Standard Practice for Instrumented Indentation Testing
ASTM E 643 : 2015 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM C 531 : 2018 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM E 2653 : 2015 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E 1326 : 2020 Standard Guide for Evaluating Non-culture Microbiological Tests
ASTM C 366/C366M : 2016 Standard Test Methods for Measurement of Thickness of Sandwich Cores
ASTM E 2782 : 2017 Standard Guide for Measurement Systems Analysis (MSA)
ASTM C 1068 : 2015 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D 7028 : 2007 : R2015 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM F 2617 : 2015 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM E 2760 : 2019 : EDT 1 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 1970 : 2016 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM D 7476 : 2008 : R2020 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
ASTM D 36/D36M : 2014 : R2020 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM E 2694 : 2016 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D 7844 : 2020 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM E 517 : 2019 Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
ASTM D 7313 : 2020 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM G 105 : 2020 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM C 110 : 2020 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM D 3575 : 2020 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
ASTM E 2008 : 2017 Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D 5235 : 2018 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
ASTM D 7817 : 2012 : R2016 Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
ASTM D 2842 : 2019 Standard Test Method for Water Absorption of Rigid Cellular Plastics
ASTM B 527 : 2020 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM F 1647 : 2011 : R2018 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes
ASTM D 4607 : 2014 Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM C 271/C271M : 2016 Standard Test Method for Density of Sandwich Core Materials
ASTM D 8380 : 2021 Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
ASTM D 4562 : 2001 : R2019 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM F 1887 : 2014 : R2019 : EDT 1 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D 198 : 2015 Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D 7249/D7249M : 2020 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
ASTM C 1292 : 2016 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM E 3205 : 2020 Standard Test Method for Small Punch Testing of Metallic Materials
ASTM E 2330 : 2019 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM C 1667 : 2015 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM D 5768 : 2002 : R2018 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM F 2544 : 2011 : R2018 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM D 7716 : 2011 : REV A : R2020 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
ASTM D 8171 : 2018 Standard Test Methods for Density Determination of Flax Fiber
ASTM E 572 : 2013 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E 2489 : 2016 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM F 1593 : 2008 : R2016 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer (Withdrawn 2023)
ASTM F 2913 : 2019 Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
ASTM D 7137/D7137M : 2017 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 Standard Terminology Relating to Quality and Statistics
ASTM D 4781 : 2003 : R2018 : EDT 1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM D 4085 : 1993 : R2013 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM F 2979 : 2020 Standard Guide for Characterization of Wear from the Articulating Surfaces in Retrieved Metal-on-Metal and other Hard-on-Hard Hip Prostheses
ASTM E 595 : 2015 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM D 628/D628M : 1995 : R2017 Standard Specification for Asbestos Tubular Sleeving (Withdrawn 2022)
ASTM D 4284 : 2012 : R2017 : EDT 1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM E 2994 : 2016 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 2927 : 2016 : EDT 1 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM E 3124 : 2017 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
ASTM C 25 : 2019 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM D 8020 : 2015 : R2020 Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
ASTM D 5751 : 1999 : R2019 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM E 2948 : 2016 : REV A Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM D 3518/D3518M : 2018 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
ASTM A 956/A956M : 2017 : REV A Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM D 7078/D7078M : 2020 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 7855/D7855M : 2013 : R2017 Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM E 23 : 2018 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM C 1170/C1170M : 2020 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
ASTM D 7686 : 2019 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D 4791 : 2019 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM C 365/C365M : 2016 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM C 613 : 2019 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM D 7786 : 2013 : R2019 Standard Test Method for Determining Enamel Holdout
ASTM D 3963/D3963M : 2015 Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
ASTM E 1709 : 2016 : EDT 2 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM D 7336/D7336M : 2016 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM D 6115 : 1997 : R2019 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM F 2077 : 2018 Test Methods For Intervertebral Body Fusion Devices
ASTM E 2649 : 2020 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM D 2862 : 2016 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D 7635/D7635M : 2018 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM C 1162/C1162M : 1990 : R2015 Standard Test Method for Loose Density of Asbestos (Withdrawn 2021)
ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM E 2253 : 2016 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM D 1335 : 2021 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
ASTM D 8066/D8066M : 2017 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
ASTM E 3061 : 2017 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM D 1240 : 2014 : R2018 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM D 6873/D6873M : 2019 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2177 : 2020 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R<inf >L</inf>) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery
ASTM C 480/C480M : 2016 Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM D 7423 : 2017 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM D 7458 : 2014 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM E 2406 : 2016 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
ASTM G 204 : 2015 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM D 7735 : 2017 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM D 8054/D8054M : 2016 Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns
ASTM D 5448/D5448M : 2016 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 3907/D3907M : 2019 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D 3420 : 2014 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D 3498 : 2019 : REV A Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing
ASTM D 6851 : 2020 Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM C 1122/C1122M : 1990 : R2015 Standard Test Method for Wet Volume of Asbestos (Withdrawn 2021)
ASTM F 1940 : 2007 : REV A : R2019 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM E 481 : 2016 Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
ASTM D 3670 : 1991 : R2014 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D 6738 : 2015 : R2019 Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 1585 : 2015 : R2020 Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM B 887 : 2012 : R2019 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
ASTM E 1260 : 2003 : R2020 Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM D 2344/D2344M : 2016 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 3552 : 2017 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D 6741 : 2010 : R2019 Standard Test Methods for Silanes Used in Rubber Formulations<brk/>(bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM D 8136 : 2017 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
ASTM D 7615/D7615M : 2019 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM D 5029 : 1998 : R2020 Standard Test Method for Water Solubles in Activated Carbon
ASTM E 2161 : 2021 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM D 1065 : 2018 Standard Test Method for Unsaponifiable Matter in Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM F 2797 : 2019 Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
ASTM E 384 : 2017 Standard Test Method for Microindentation Hardness of Materials
ASTM B 636/B636M : 2015 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B 769 : 2011 : R2016 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM C 1468 : 2019 : REV A Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM E 132 : 2017 Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM D 8115 : 2017 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
ASTM D 3800 : 2016 Standard Test Method for Density of High-Modulus Fibers
ASTM F 3136 : 2015 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM D 8176 : 2018 Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 4438 : 2013 : R2018 : EDT 1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D 7577 : 2012 : R2016 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM G 51 : 2018 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM F 1645/F1645M : 2016 Standard Test Method for Water Migration in Honeycomb Core Materials
ASTM D 4464 : 2015 : R2020 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
ASTM D 7084 : 2018 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM C 1735 : 2017 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM D 7250/D7250M : 2020 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D 6484/D6484M : 2020 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D 6459 : 2019 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM C 695 : 2015 : R2020 Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM F 3080 : 2017 : REV A Standard Practice for Laser Technologies for Measurement of Cross-Sectional Shape of Pipeline and Conduit by Non-Rotating Laser Projector and CCTV Camera System
ASTM D 2369 : 2020 Standard Test Method for Volatile Content of Coatings
ASTM D 5403 : 1993 : R2013 Standard Test Methods for Volatile Content of Radiation Curable Materials
ASTM D 7412 : 2018 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
ASTM D 7661 : 2018 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM D 2752/D2752M : 1988 : R2019 Standard Test Methods for Air Permeability of Asbestos Fibers (Withdrawn 2022)
ASTM A 833 : 2019 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D 4890 : 2018 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
ASTM D 3752 : 1998 : R2019 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix (Withdrawn 2022)
ASTM B 822 : 2020 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM F 2199 : 2020 Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
ASTM D 7812 : 2016 Standard Test Method for Tensile Testing of Aramid Paper
ASTM D 1683/D1683M : 2017 : R2018 Standard Test Method for Failure in Sewn Seams of Woven Fabrics
ASTM C 198 : 2009 : R2019 Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM D 7637 : 2010 : R2015 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D 1977 : 2016 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D 8089 : 2017 Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
ASTM E 2427 : 2018 Standard Test Method for Acceptance by Performance Testing for Sieves
ASTM D 5755 : 2009 : R2014 : EDT 1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023)
ASTM E 1489 : 2008 : R2019 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
ASTM E 1617 : 2009 : R2019 Standard Practice for Reporting Particle Size Characterization Data
ASTM D 6567 : 2018 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
ASTM D 2867 : 2017 Standard Test Methods for Moisture in Activated Carbon
ASTM C 1763 : 2020 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM E 1921 : 2020 Standard Test Method for Determination of Reference Temperature, <emph type="bdit">T<inf >o</inf></emph>, for Ferritic Steels in the Transition Range
ASTM D 7937 : 2015 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM C 1382 : 2016 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM D 7823 : 2020 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
ASTM D 4894 : 2019 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM F 2156 : 2017 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
ASTM D 6647 : 2018 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
ASTM C 604 : 2018 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D 6575/D6575M : 2016 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM E 9 : 2019 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM F 1951 : 2014 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
ASTM D 6906 : 2012 : REV A : R2016 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D 6299 : 2020 : REV A Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D 5153 : 2010 : R2016 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM E 1680 : 2016 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
ASTM E 1965 : 1998 : R2016 Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM E 834 : 2009 : R2015 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
ASTM D 7819 : 2012 : R2016 Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
ASTM D 7767 : 2011 : R2018 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
ASTM F 735 : 2017 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM C 1785 : 2017 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM D 3273 : 2016 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 6607 : 2000 : R2015 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
ASTM G 181 : 2011 : R2017 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM F 3079 : 2014 : R2020 Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities
ASTM E 970 : 2017 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM D 7283 : 2017 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM D 7984 : 2016 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM F 386 : 2017 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM D 127 : 2019 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
ASTM D 3663 : 2020 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D 6641/D6641M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
ASTM B 797 : 2020 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
ASTM C 297/C297M : 2016 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM D 7151 : 2015 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 7005/D7005M : 2016 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D 6656 : 2016 Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
ASTM D 8293 : 2019 Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements

View more information
£70.87
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.