• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 13501-2:2016

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
Withdrawn date

31-12-2016

Published date

22-06-2016

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Fire scenarios
5 Resistance to fire performance characteristics
6 Declaration of fire resistance performance
7 Classification procedure for fire resistance
Annex A (normative) - Classification report
Annex B (informative) - Presentation of characterization
        data and their field of application for products
        and systems for protecting elements or parts of
        work
Bibliography

This European Standard specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this European Standard."This European Standard deals with:a)loadbearing elements without a fire separating function:walls;floors;roofs;beams;columns;balconies;walkways;stairs.b)loadbearing elements with a fire separating function, with or without glazing, services and fixtures:walls;floors;roofs;raised floors.c)products and systems for protecting elements or parts of the works:ceilings with no independent fire resistance;fire protective coatings, claddings and screens;d)non-loadbearing elements or parts of works, with or without glazing, services and fixtures:partitions;facades (curtain walls) and external walls;ceilings with independent fire resistance;raised floorsfire doors and shutters and their closing devices;smoke control doors;conveyor systems and their closures;penetration seals;linear gap seals;service ducts and shafts;chimneys.e)wall and ceiling coverings with fire protection ability.f)lift landing doors which are tested according to EN 81-58 are excluded from this European Standard. Lift landing doors which are tested in accordance with EN 1634-1, are classified in accordance with 7.5.5.Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.

Committee
CEN/TC 127
DevelopmentNote
Supersedes PREN 13501-2. (06/2016)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn
Supersedes

PREN 13658-2 : DRAFT 2017 METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING
PREN 15497 : DRAFT 2011 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
08/30188125 DC : 0 BS EN 15269-3 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: TIMBER HINGED AND PIVOTED DOORSETS
BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
UNI EN 15998 : 2011 GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
17/30347436 DC : 0 BS EN 15269-1 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
DIN EN 15882-3:2009-07 EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
I.S. EN 15681-2:2017 GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
15/30328765 DC : 0 BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
DIN EN 15269-2:2012-12 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
I.S. EN 15269-1:2010 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
CEN/TR 14819-2:2005 Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations
I.S. EN 15269-7:2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
11/30251988 DC : 0 BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15269-20:2009-12 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
I.S. EN 15269-5:2014 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
PREN 13279-1 : DRAFT 2017 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 1634-2 : 2009 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
BS EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows. Product standard, performance characteristics. Fire resisting and/or smoke control characteristics
08/30152055 DC : DRAFT APR 2008 BS EN 50518-1 - MONITORING AND ALARM RECEIVING CENTER - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
BS EN 1364-5:2017 Fire resistance tests for non-loadbearing elements Air transfer grilles
BS EN 15682-2:2013 Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
13/30217369 DC : 0 BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15269-2:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted steel doorsets
BS EN 45545-1:2013 Railway applications. Fire protection on railway vehicles General
08/30171552 DC : DRAFT JAN 2008 BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
CEI UNI EN 50518-1 : 2015 MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
DIN EN 14509:2013-12 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 15080-12:2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
07/30166420 DC : DRAFT AUG 2007 BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
13/30267101 DC : 0 BS EN 15269-11 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE OF OPERABLE FABRIC CURTAINS
BS EN 16309 : 2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
PREN 13658-1 : DRAFT 2017 METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING
10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
PREN 15254-4 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
PREN 572-9 : DRAFT 2017 GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
16/30336421 DC : 0 BS EN 81-58 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
16/30330693 DC : 0 BS EN 15254-5 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
17/30309558 DC : 0 BS IEC 60772 ED 2.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - ELECTRICAL PENETRATION ASSEMBLIES IN CONTAINMENT STRUCTURES
NF EN 15998 : 2011 GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
UNE-EN 16623:2015 Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 15269-20:2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
DIN EN 15254-7:2012-09 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 1364-3 : DRAFT 2011 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
PREN 14081-1 : DRAFT 2013 TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 1364-5:2017-09 Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
UNE-EN 45545-1:2013 Railway applications - Fire protection on railway vehicles - Part 1: General
PREN 1364-4 : DRAFT 2011 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
DIN EN 15254-4:2013-10 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
CEN/TR 14819-1:2004 Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 1: Funicular railways in tunnels
S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 16034:2014 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
BS EN 16153 : 2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 15882-4:2013 Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
I.S. EN 45545-3:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DIN EN 15254-5:2010-04 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
PREN 12602 : DRAFT 2015 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
UNI EN 16034 : 2014 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS
UNI CEI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
CEI UNI EN 45545-3 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
UNI CEI EN 50518-1 : 2014 MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
17/30360105 DC : 0 BS EN 1748-1-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
UNI EN 1279-5 : 2010 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
UNI EN 1090-1 : 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
UNI EN 15682-2 : 2013 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 15269-11:2018 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance for operable fabric curtains
I.S. EN 14963:2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
DIN EN 1096-4:2015-06 (Draft) GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 1634-1:2014 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
I.S. EN 14915:2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
EN 14915:2013+A1:2017 Solid wood panelling and cladding - Characteristics, requirements and marking
DIN EN 1993-1-2:2010-12 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2009)
DIN EN 14250 E : 2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
DIN EN 1364-3:2014-05 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
BS EN 13063-2:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods under wet conditions
BS EN 14471 : 2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
BS EN 13063-3:2007 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys
BS EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Insulation components
BS EN 179:2008 Building hardware. Emergency exit devices operated by a lever handle or push pad, for use on escape routes. Requirements and test methods
BS EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass Evaluation of conformity/Product standard
BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods
BS EN 1634-3:2004 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Smoke control test for door and shutter assemblies
BS EN 12209:2016 Building hardware. Mechanically operated locks and locking plates. Requirements and test methods
BS EN 438-7:2005 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
BS EN 357:2004 Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
UNE-EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
BS EN 13658-2:2005 Metal lath and beads. Definitions, requirements and test methods External rendering
BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
BS EN 520 : 2004 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14989-1:2007 Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications Vertical air/flue terminals for C6-type appliances
I.S. EN 1364-3:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
DIN EN 13815:2006-12 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 13069:2005 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
DIN EN 15254-2:2009-10 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
DIN EN 13063-3:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 13830:2015-07 CURTAIN WALLING - PRODUCT STANDARD
DIN EN 14496:2017-09 GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
EN 12391-1:2003 Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances
DIN EN 14209:2017-09 PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 12859:2011 Gypsum blocks - Definitions, requirements and test methods
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 50518-1:2013 MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
DIN EN 15725:2012-05 Extended application reports on the fire performance of construction products and building elements (includes Corrigendum AC:2012)
DIN EN 13915:2017-09 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems
EN 13063-1:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 1: Requirements and test methods for sootfire resistance
EN 13024-2:2004 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 45545-3:2013 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
EN 13200-7:2014 Spectator facilities - Part 7: Entry and exit elements and routes
EN 1366-7:2004 Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
DIN EN 15287-2:2008-06 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
PREN 13830 : DRAFT 2013 CURTAIN WALLING - PRODUCT STANDARD
UNI EN 16309 : 2014-10 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
DIN EN 15882-4:2012-07 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
CEI UNI EN 45545-1 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
DIN EN 15682-2:2013-10 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 15269-3 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS
BS EN 15283-1 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
UNE-EN 13200-7:2014 Spectator facilities - Part 7: Entry and exit elements and routes
UNE-EN 15683-2:2014 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
13/30266550 DC : 0 BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
10/30218654 DC : 0 BS EN 12859 - GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15725 E : 2012 EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
UNI EN 15269-7 : 2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS
DIN EN 16623:2015-04 PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
BS EN 1090-1 : 2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS EN 15681-2:2017 Glass in Building. Basic alumino silicate glass products Product standard
PREN 45545-3 : DRAFT 2010 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
BS EN 50583-1:2016 Photovoltaics in buildings BIPV modules
BS EN 50583-2:2016 Photovoltaics in buildings BIPV systems
I.S. EN 12391-1:2004 CHIMNEYS - EXECUTION STANDARD FOR METAL CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
UNI EN 15283-2 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
12/30255284 DC : DRAFT APR 2012 BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD
DIN EN 15283-2:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards (includes Amendment A1:2009)
PREN 14178-2 : DRAFT 2017 GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
09/30188385 DC : 0 BS EN 15269-2 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
DIN EN 45545-1:2013-08 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
10/30211850 DC : 0 BS EN 16034 - PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
BS EN 16623:2015 Paints and varnishes. Reactive coatings for fire protection of metallic substrates. Definitions, requirements, characteristics and marking
DIN EN 15497:2014-07 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
17/30354239 DC : 0 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
12/30261882 DC : 0 BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS-SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 15287-1:2010-12 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances (includes Amendment A1:2010)
I.S. EN 15283-1:2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
UNI EN 15283-1 : 2009 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
11/30236369 DC : 0 BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER
09/30203195 DC : 0 BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
BS EN 16351:2015 Timber structures. Cross laminated timber. Requirements
UNI EN 15080-12 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
UNE-EN 45545-3:2013 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
13/30281348 DC : 0 BS EN 13830 - CURTAIN WALLING - PRODUCT STANDARD
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
11/30250549 DC : 0 BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
PREN 1748-1-2 : DRAFT 2017 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - BOROSILICATE FLOAT GLASS - PART 1-2: PRODUCT STANDARD
BS EN 81-58:2003 Safety rules for the construction and installation of lifts Examination and tests. Landing doors fire resistance test
UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN 1096-4:2004 GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 13200-7:2014 SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
BS EN 1999-1-2:2007 Eurocode 9. Design of aluminium structures Structural fire design
I.S. EN 15998:2010 GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
FM 4100 : 1988 FIRE DOOR ASSEMBLIES
PREN 14374 : DRAFT 2016 TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
PREN 12150-2 : DRAFT 2017 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
DIN EN 15269-1:2010-07 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
UNI EN 15497 : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
PREN 1748-2-2 : DRAFT 2017 GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD
PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
S.R. CEN/TR 12101-4:2009 SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION
BS EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware General requirements
I.S. EN 14081-1:2016 TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
BS EN 13369:2013 Common rules for precast concrete products
I.S. EN 16035:2012 HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
UNI EN 15269-10 : 2011 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES
I.S. EN 13369:2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNE-EN 15725:2011 Extended application reports on the fire performance of construction products and building elements
DIN EN 15681-2:2015-07 (Draft) GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
PREN 14471 : DRAFT 2011 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
PREN 15269-1 : DRAFT 2017 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
UNI EN 15287-1 : 2010 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
UNI EN 15287-2 : 2008 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOM-SEALED APPLIANCES
UNI EN 15254-5 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
I.S. EN 1364-5:2017 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
I.S. EN 16309:2014 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
15/30319715 DC : 0 BS EN 1279-5 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
17/30353865 DC : 0 BS EN 1443 - CHIMNEYS - GENERAL REQUIREMENTS
PREN 14449 : DRAFT 2017 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD
I.S. EN 15682-2:2013 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 15269-20 : 2009 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS
UNE-EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
UNE-EN 50518-1:2014 Monitoring and alarm receiving centre - Part 1: Location and construction requirements
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
DIN EN 13063-2 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
DIN EN 12337-2:2005-01 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004
DIN EN 13279-1:2008-11 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 1366-3:2009-07 Fire resistance tests for service installations - Part 3: Penetration seals
DIN EN 1748-1-2:2005-01 Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
DIN EN 572-9:2005-01 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1748-2-2:2005-01 Glass in building - Special basic products - Glass ceramics - Part 2-2: Evaluation of conformity/Product standard
DIN EN 1364-4:2014-05 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
DIN EN 14178-2:2005-01 Glass in Building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
DIN EN 1279-5:2015-08 (Draft) GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
DIN EN 14449:2005-07 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard
DIN EN 14321-2 E : 2005 GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
DIN EN 14246:2006-09 Gypsum elements for suspended ceilings - Definitions, requirements and test methods
DIN EN 14471:2015-03 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 15318:2008-01 Design and application of gypsum blocks
DIN EN 14250:2010-05 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DIN EN 14496:2016-02 (Draft) GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
UNE-EN 1364-3:2015 Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
I.S. EN 13830:2015 CURTAIN WALLING - PRODUCT STANDARD
I.S. EN 14471:2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
I.S. EN 1364-4:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
I.S. EN 14496:2017 GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 13063-2:2005 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
I.S. EN 179:2008 BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
I.S. EN 14209:2017 PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 12391-1:2004-04 CHIMNEYS - EXECUTION STANDARD FOR METAL CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOM SEALED HEATING APPLIANCES
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 13915:2017 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1634-3:2004 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
DIN EN 1036-2:2008-05 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD
I.S. EN 520:2005 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 845-2:2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
I.S. EN 13063-1:2006 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
I.S. EN 14250:2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
I.S. EN 357:2004 GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
I.S. EN 13950:2014 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 12209:2016 BUILDING HARDWARE - MECHANICALLY OPERATED LOCKS AND LOCKING PLATES - REQUIREMENTS AND TEST METHODS
I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
I.S. EN 1125:2008 BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
I.S. EN 13964:2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 13069:2005-12 Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods
I.S. EN 12859:2011 GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14600:2005 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
DIN EN 15269-7:2010-04 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
I.S. EN 14190:2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 1366-3:2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 16351:2015 Timber structures - Cross laminated timber - Requirements
VDI 2050 Blatt 1.1:2017-07 Requirements for technical equipment rooms - Space for service shafts
VDI 3564 Blatt 1:2017-05 Fire protection - Recommendations for high-bay warehouses
UNE-EN 1634-1:2016 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
EN 1279-5:2005+A2:2010 Glass in building - Insulating glass units - Part 5: Evaluation of conformity
09/30194124 DC : DRAFT MAY 2009 BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 7: NON-LOAD BEARING SANDWICH PANELS - CEILINGS
BS EN 15287-2:2008 Chimneys. Design, installation and commissioning of chimneys Chimneys for roomsealed appliances
10/30216690 DC : 0 BS EN 45545-3 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
05/30134012 DC : 0 EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTION
BS EN 50518-1:2013 Monitoring and alarm receiving centre Location and construction requirements
PREN 1125 : DRAFT 2016 BUILD HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
16/30340523 DC : 0 BS EN 17020-4 - EXTENDED APPLICATION OF TEST RESULTS ON DURABILITY OF SELFCLOSING FOR DOORSETS AND OPENABLE WINDOWS - PART 4: DURABILITY OF SELF-CLOSING OF FIRE RESISTANCE HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
DIN EN 15269-10:2011-07 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
16/30332911 DC : 0 BS EN 14496 - GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PD CEN/TR 14819-2:2005 Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations
16/30347446 DC : 0 BS EN 17064 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE
DIN EN 15882-4 E : 2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
10/30211853 DC : 0 BS EN 16035 - HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTERCHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND SMOKE CONTROL DOORSETS AND OPENABLE WINDOWS
I.S. EN 15080-8:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
DIN EN 16351 E : 2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
BS EN 15254-2:2009 Extended application of results from fire resistance tests. Nonloadbearing walls Masonry and gypsum blocks
BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
BS EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance for steel sliding doorsets
BS EN 15497:2014 Structural finger jointed solid timber. Performance requirements and minimum production requirements
05/30137949 DC : 0 EN 15269-3 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE FOR DOORSETS AND SHUTTER ASSEMBLIES - FOR DOORS AND SHUTTERS - PART 3: TIMBER HINGED AND PIVOTED DOORSETS
BS EN 15254-5:2009 Extended application of results from fire resistance tests. Non-loadbearing walls Metal sandwich panel construction
16/30332908 DC : 0 BS EN 14209 - PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PD CEN/TR 15123:2005 Design, preparation and application of internal polymer plastering systems
BS EN 16035:2012 Hardware performance sheet (HPS). Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
DIN EN 15283-1:2009-12 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement (includes Amendment A1:2009)
BS EN 15683-2:2013 Glass in building. Thermally toughened soda lime silicate channel shaped safety glass Evaluation of conformity. Product standard
BS EN 13200-7:2014 Spectator facilities Entry and exit elements and routes
BS EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations Penetration seals
DIN EN 15498:2008-08 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
BS EN 15269-20:2009 Extended application of test results for fire resistance and/ or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
UNE-EN 50583-2:2016 Photovoltaics in buildings - Part 2: BIPV systems
BS EN 15725:2010 Extended application reports on the fire performance of construction products and building elements
DIN EN 13200-7 E : 2014 SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
03/115046 DC : DRAFT SEP 2003 BS EN 1366-4 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
DIN EN 14963 E : 2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
12/30266506 DC : 0 BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
16/30347433 DC : 0 BS EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
DIN EN 13200-7:2014-06 SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
05/30136031 DC : 0 EN 15287-1 - CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS EN 45545-3:2013 Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers
05/30138009 DC : DRAFT AUG 2005 EN 15319 - GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
BS EN 15287-1 : 2007 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
DIN EN 15080-12:2011-04 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
DIN EN 14963:2006-12 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 15269-20 : DRAFT 2017 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
BS EN 15498:2008 Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance
12/30274727 DC : 0 BS EN 61936-1 AMD 1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
DIN EN 16623 E : 2015 PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
I.S. EN 15254-7:2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
DIN EN 16153:2015-05 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 50518 : DRAFT 2016 MONITORING AND ALARM RECEIVING CENTRE
I.S. CEN TR 14819-1:2004 SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 1: FUNICULAR RAILWAYS IN TUNNELS
PREN 14209 : DRAFT 2016 PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
I.S. CEN/TR 15123:2005 DESIGN, PREPARATION AND APPLICATION OF INTERNAL POLYMER PLASTERING SYSTEMS
I.S. EN 50518-1:2013 MONITORING AND ALARM RECEIVING CENTRE - PART 1: LOCATION AND CONSTRUCTION REQUIREMENTS
PREN 15254-7 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
BS EN 1634-1 : 2014 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 1: FIRE RESISTANCE TEST FOR DOOR AND SHUTTER ASSEMBLIES AND OPENABLE WINDOWS
I.S. EN 16240:2013 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 13200-7 : 2014 SPECTATOR FACILITIES - PART 7: ENTRY AND EXIT ELEMENTS AND ROUTES
UNI EN 15254-6 : 2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
I.S. EN 15269-3:2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE
I.S. EN 15725:2010 EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
PREN 14190 : DRAFT 2011 GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13369:2013-08 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
NF EN 1279-5 : 2005 + A2 2010 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
UNE-EN 15254-6:2015 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling
PREN 14509 : DRAFT 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 1634-2:2008 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
UNE-EN 15269-3:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
PREN 1279-5 : DRAFT 2015 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
BS EN 1096-4:2004 Glass in building. Coated glass Evaluation of conformity/Product standard
PREN 179 : DRAFT 2016 BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNI EN 15254-2 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
UNI EN 15498 : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
UNI EN 16035 : 2013 HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
I.S. CEN TR 14819-2:2006 SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS
UNE-EN 16034:2015 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
PREN 1443 : DRAFT 2017 CHIMNEYS - GENERAL REQUIREMENTS
PREN 13950 : DRAFT 2011 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 13915 : DRAFT 2016 PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI CEI EN 45545-3 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
PREN 81-58 : DRAFT 2016 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
EN 61936-1 : 2010 AMD 1 2014 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
EN 1634-1:2014 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows
EN 15269-11:2018 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains
I.S. EN 14509:2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
I.S. EN 1279-5:2005 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
I.S. EN 15498:2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
DIN EN 14179-2:2005-08 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
DIN EN 12150-2:2005-01 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004
DIN EN 13063-3 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS
DIN EN 12859:2011-05 Gypsum blocks - Definitions, requirements and test methods
DIN EN 1366-7:2004-09 Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
DIN EN 1863-2:2005-01 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004
DIN EN 1125:2008-04 BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
DIN EN 13024-2:2005-01 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 13024-2:2004
DIN EN 438-7:2005-04 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005
DIN EN 14471 E : 2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 13950:2014-09 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14449 E : 2005 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY - PRODUCT STANDARD
DIN EN 13915:2016-02 (Draft) PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 13964:2014-08 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 15319 E : 2007 GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
UNE-EN 14509:2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 1125:2008 Building hardware. Panic exit devices operated by a horizontal bar, for use on escape routes. Requirements and test methods
BS EN 14178-2:2004 Glass in building. Basic alkaline earth silicate glass products Evaluation of conformity/Product standard
BS EN 14600:2005 Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
UNE-EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 572-9:2004 Glass in building. Basic soda lime silicate glass products Evaluation of conformity/Product standard
BS EN 13069:2005 Chimneys. Clay/ceramic outer walls for system chimneys. Requirements and test methods
UNE-EN 13830:2016 Curtain walling - Product standard
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
I.S. EN 14080:2013 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
EN 13830:2015 Curtain walling - Product standard
UNE-EN 15269-1:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
UNE-EN 12859:2012 Gypsum blocks - Definitions, requirements and test methods
EN 15269-20:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
EN 15998:2010 Glass in building - Safety in case of fire, fire resistance - Glass testing methodology for the purpose of classification
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 13964:2014 Suspended ceilings - Requirements and test methods
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14449:2005/AC:2005 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 12859 : 2011 GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 14509 : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 520 : 2009 GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 15681-2:2017 Glass in Building - Basic alumino silicate glass products - Part 2: Product standard
UNI EN 14600 : 2006 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
UNI EN 14449 : 2005 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 14080 : 2013 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
UNI EN 1993-1-2 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
UNI EN 1634-3 : 2005 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
UNI EN 14190 : 2014 GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13964 : 2014 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 14250 : 2010 TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS
ONORM EN 1366-3 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
UNI EN 1364-3 : 2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
UNI EN 1999-1-2 : 2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
UNI EN 14246 : 2006 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 13279-1 : 2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 13950 : 2014 GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1364-4 : 2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
UNI EN 179 : 2008 BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNI EN 1125 : 2008 BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNE-EN 50223:2016 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
DIN EN 15683-2:2014-02 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
17/30357430 DC BS EN 13658-2. Metal lath and beads. Definitions, requirements and test methods. Part 2. External rendering
UNI EN 15725 : 2010 EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
04/30111056 DC : DRAFT MARCH 2004 EN 1806 - CHIMNEYS - CLAY/CERAMIC FLUE BLOCKS FOR SINGLE WALL CHIMNEYS - REQUIREMENTS AND TEST METHODS
EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
DIN EN 16351:2015-12 Timber structures - Cross laminated timber - Requirements
I.S. EN 15497:2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
UNE-EN 13915:2018 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
11/30249114 DC : 0 BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
DIN EN 16309:2014-12 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
I.S. EN 15269-11:2018+AC:2019 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE FOR OPERABLE FABRIC CURTAINS
BS EN 15080-8:2009 Extended application of results from fire resistance tests Beams
UNI CEI CEN/TS 45545-3 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
DIN EN 1364-5 E : 2017 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES
DIN EN 16034:2014-12 PEDESTRIAN DOORSETS, INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND OPENABLE WINDOWS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - FIRE RESISTANCE AND/OR SMOKE CONTROL CHARACTERISTICS
04/30124508 DC : 0 EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: PENETRATION SEALS
DIN EN 15498 E : 2008 PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE
16/30330690 DC : 0 BS EN 15254-7 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
PREN 13369 : DRAFT 2017 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
DIN EN 15254-5 E : 2010 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
07/30172842 DC : 0 BS EN 15080-12 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 12: LOADBEARING MASONRY WALLS
13/30263194 DC : 0 BS EN 16623 - PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
CEN/TR 12101-4:2009 Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation
17/30360667 DC : DRAFT SEP 2017 BS EN 1748-2-2 - GLASS IN BUILDING - SPECIAL BASIC PRODUCTS - GLASS CERAMICS - PART 2-2: PRODUCT STANDARD
13/30288842 DC : 0 BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 15998:2011-02 GLASS IN BUILDING - SAFETY IN CASE OF FIRE, FIRE RESISTANCE - GLASS TESTING METHODOLOGY FOR THE PURPOSE OF CLASSIFICATION
BS EN 15269-3:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
DIN EN 1634-2:2009-05 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
00/107014 DC : DRAFT OCT 2000 PREN 520 - GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 15080-8:2010-02 Extended application of results from fire resistance tests - Part 8: Beams
UNI EN 15080-8 : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS
DIN EN 16240:2014-03 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
17/30357433 DC BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements
I.S. EN 16351:2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
PREN 14496 : DRAFT 2016 GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
PREN 50583 : DRAFT 2012 PHOTOVOLTAICS IN BUILDINGS
UNE-EN 13369:2013 Common rules for precast concrete products
BS EN 15998:2010 Glass in building. Safety in case of fire, fire resistance. Glass testing methodology for the purpose of classification
DIN EN 14509 E : 2013 SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
11/30252455 DC : 0 BS EN 1364-4 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION
05/30135869 DC : 0 EN 15283-1 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT
11/30252458 DC : 0 BS EN 1364-3 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
I.S. EN 1090-1:2009 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 1999-1-2:2007 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
UNI EN 15882-3 : 2009 EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
17/30357427 DC BS EN 13658-1. Metal lath and beads. Definitions, requirements and test methods. Part 1. Internal plastering
BS EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete
UNI EN 15882-4 : 2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
I.S. CEN/TR 15124:2005 DESIGN, PREPARATION AND APPLICATION OF INTERNAL GYPSUM PLASTERING SYSTEMS
PREN 14179-2 : DRAFT 2017 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
I.S. EN 15254-6:2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
XP CEN/TS 45545-3 : 2009 XP RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
BS EN 15254-7:2012 Extended application of results from fire resistance tests. Non-loadbearing ceilings Metal sandwich panel construction
I.S. EN 15683-2:2013 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 15287-2:2008 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 2: CHIMNEYS FOR ROOMSEALED APPLIANCES
I.S. EN 15882-4:2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS
S.R. CEN/TS 45545-3:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS
PREN 845-2 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 81-58:2018 Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test
15/30324901 DC : 0 BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
16/30343246 DC : 0 BS EN 1125 - BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
UNI EN 15254-7 : 2012 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION
15/30327624 DC : 0 BS EN 15269-6 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 6: FIRE RESISTANCE OF SLIDING TIMBER DOORSETS
PREN 15254-5 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
PREN 12859 : DRAFT 2010 GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 15254-7:2018 Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction
I.S. EN 61936-1:2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
EN 13369:2018 Common rules for precast concrete products
I.S. CEN TR 12101-4:2006 SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION
I.S. EN 15882-3:2009 EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
I.S. EN 81-58:2018 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
I.S. EN 13279-1:2008 GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN EN 13063-1 E : 2007 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
DIN EN 14915 E : 2013 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
DIN EN 14209:2016-02 (Draft) PREFORMED PLASTERBOARD CORNICES - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14190:2014-09 Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 14496 E : 2017 GYPSUM BASED ADHESIVES FOR THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS AND GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 14081-1:2016-06 TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 1: GENERAL REQUIREMENTS
DIN EN 14080:2013-09 TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
DIN EN 1634-3:2005-01 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
BS EN 1863-2:2004 Glass in building. Heat strengthened soda lime silicate glass Evaluation of conformity. Product standard
BS EN 13658-1:2005 Metal lath and beads. Definitions, requirements and test methods Internal plastering
BS EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods
BS EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods
BS EN 13815:2006 Fibrous gypsum plaster casts. Definitions, requirements and test methods
BS EN 14209:2017 Preformed plasterboard cornices. Definitions, requirements and test methods
EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
BS EN 1364-4:2014 Fire resistance tests for non-loadbearing elements Curtain walling. Part configuration
UNE-EN 16351:2016 Timber structures - Cross laminated timber - Requirements
BS EN 1366-3:2009 Fire resistance tests for service installations Penetration seals
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
UNE-EN 14081-1:2016 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
DIN EN 15319:2007-10 General principles of design of fibrous (gypsum) plaster works
UNE-EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
DIN EN 15318 E : 2008 DESIGN AND APPLICATION OF GYPSUM BLOCKS
BS EN 13063-1:2005 Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for sootfire resistance
UNE-EN 12209:2017 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
UNE EN 15287-1 : 0 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
BS EN 13279-1:2008 Gypsum binders and gypsum plasters Definitions and requirements
BS EN 14321-2:2005 Glass in building. Thermally toughened alkaline earth silicate safety glass Evaluation of conformity/Product standard
BS EN 15318:2007 Design and application of gypsum blocks
BS EN 14250:2010 Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
UNE EN 16309 : 0 SUSTAINABILITY OF CONSTRUCTION WORKS - ASSESSMENT OF SOCIAL PERFORMANCE OF BUILDINGS - CALCULATION METHODOLOGY
17/30326406 DC : 0 BS EN 17168 - RAILWAY APPLICATIONS - PLATFORM BARRIER SYSTEMS
BS EN 61936-1 : 2010 POWER INSTALLATIONS EXCEEDING 1 KV A.C - PART 1: COMMON RULES
BS EN 1364-3:2014 Fire resistance tests for non-loadbearing elements Curtain walling. Full configuration (complete assembly)
BS EN 12391-1:2003 Chimneys. Execution standard for metal chimneys Chimneys for non-roomsealed heating appliances
BS EN 14246:2006 Gypsum elements for suspended ceilings. Definitions, requirements and test methods
BS EN 13830:2015 Curtain walling. Product standard
BS EN 1748-1-2:2004 Glass in building. Special basic products Borosilicate glasses - Evaluation of conformity. Product standard
BS EN 14080:2013 Timber structures. Glued laminated timber and glued solid timber. Requirements
UNE-EN 1364-4:2015 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
BS EN 14449:2005 Glass in building. Laminated glass and laminated safety glass. Evaluation of conformity/product standard
BS EN 12859:2011 Gypsum blocks. Definitions, requirements and test methods
UNE-EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
BS EN 1748-2-2:2004 Glass in building. Special basic products Glass ceramics - Evaluation of conformity/Product standard
EN 14190:2014 Gypsum board products from reprocessing - Definitions, requirements and test methods
EN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
EN 15882-4:2012 Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods
EN 845-2:2013+A1:2016 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 15269-3:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 14080:2013 Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 15269-5:2014+A1:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows - Product standard, performance characteristics - Fire resisting and/or smoke control characteristics
EN 14963:2006 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN 13658-2:2005 Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
UNI EN 1366-3 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 14178-2:2004 Glass in building - Basic alkaline earth silicate glass products - Part 2: Evaluation of conformity/Product standard
EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
EN 15498:2008 Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance
EN 15254-6 : 2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
EN 14246:2006/AC:2007 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
EN 14321-2:2005 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 15683-2:2013 Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard
EN 14989-1:2007 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
EN 15287-2:2008 Chimneys - Design, installation and commissioning of chimneys - Part 2: Chimneys for roomsealed appliances
EN 13815:2006 Fibrous gypsum plaster casts - Definitions, requirements and test methods
EN 1748-1-2:2004 Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard
EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 15318 : 2007 DESIGN AND APPLICATION OF GYPSUM BLOCKS
EN 1364-3:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
EN 1634-3:2004/AC:2006 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
EN 15725:2010/AC:2012 EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
EN 14081-1:2016 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
EN 16309:2014+A1:2014 Sustainability of construction works - Assessment of social performance of buildings - Calculation methodology
EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods
EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 1748-2-2:2004 Glass in building - Special basic products - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard
EN 16623:2015 Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking
EN 15080-8:2009 Extended application of results from fire resistance tests - Part 8: Beams
EN 15254-2:2009 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 1364-4:2014 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
EN 1634-2 : 2008 Fire resistance and smoke control tests for door, shutter and openable window assemblies and elements of building hardware - Part 2: Fire resistance characterisation test for elements of building hardware
EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
EN 357:2004 Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods
EN 438-7:2005 (edition 2) High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 16035:2012 Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows
EN 1999-1-2:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
EN 15682-2:2013 Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals
EN 15269-2 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 15319 : 2007 GENERAL PRINCIPLES OF DESIGN OF FIBROUS (GYPSUM) PLASTER WORKS
EN 13658-1:2005 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 14620-4:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
EN 1364-5:2017 Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
I.S. EN 45545-1:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
ISO/TR 12470-1:2017 Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 1: Loadbearing elements and vertical and horizontal separating elements
DIN EN 16035:2013-03 HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTERCHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS
UNE-EN 15682-2:2014 Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
BS EN 14963:2006 Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
UNE-EN 50583-1:2016 Photovoltaics in buildings - Part 1: BIPV modules
05/30135872 DC : 0 EN 15283-2 - GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
I.S. EN 438-7:2005 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNE-EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
UNE-EN 15319:2012 General principles of design of fibrous (gypsum) plaster works
UNE-EN 15269-2:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets
I.S. EN 15287-1:2007 CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES
I.S. EN 16623:2015 PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING
UNE-EN 1993-1-2:2016 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
DIN EN 45545-3:2013-08 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
I.S. EN 15269-2:2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
17/30359844 DC : 0 BS EN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
DIN EN 15254-2 E : 2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
DIN EN 15254-4 E : 2013 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
05/30093062 DC : 0 PREN 15269-2 - EXTENDED APPLICATION OF TEST RESULTS FOR DOORSETS AND SHUTTER ASSEMBLIES - FOR DOORS AND SHUTTERS - PART 2: STEEL HINGED AND PIVOTED DOORSETS
BS EN 15283-2 : 2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
05/30137946 DC : 0 EN 15269-1 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE FOR DOORSETS AND SHUTTER ASSEMBLIES - FOR DOORS AND SHUTTERS - PART 1: GENERAL REQUIREMENTS FOR FIRE RESISTANCE
06/30154477 DC : 0 EN 1634-2 - FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE CHARACTERISATION TEST FOR ELEMENTS OF BUILDING HARDWARE
BS EN 15080-12:2011 Extended application of results from fire resistance tests Loadbearing masonry walls
11/30251985 DC : 0 BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
12/30265747 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS EN 15269-5 : 2014 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
DIN EN 15269-3:2012-10 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
DIN EN 15497 E : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
12/30255661 DC : 0 BS EN 15269-5 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS
PD ISO/TR 12470-2:2017 Fire-resistance tests. Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Non-loadbearing elements
UNI EN 15683-2 : 2014 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE CHANNEL SHAPED SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD
BS EN 15882-4:2012 Extended application of results from fire resistance tests for service installations Linear joint seals
I.S. EN 50583-2:2016 PHOTOVOLTAICS IN BUILDINGS - PART 2: BIPV SYSTEMS
12/30266553 DC : 0 BS EN 16477-2 - GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY
BS EN 15254-6:2014 Extended application of results from fire resistance tests. Non-loadbearing walls Curtain walling
12/30252241 DC : DRAFT JAN 2012 BS EN 15254-6 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
PD CEN/TR 14819-1:2004 Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Funicular railways in tunnels
04/30099887 DC : DRAFT MAY 2004 PREN 14963 - ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
DIN EN 1999-1-2:2010-12 Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design (includes Corrigendum AC:2009)
16/30299842 DC : 0 BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE
11/30253102 DC : 0 BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
15/30315346 DC : 0 BS ISO 17880 - CELLULAR PLASTIC - SELF-SUPPORTING METAL-FACED SANDWICH PANELS - COMPLEMENTARY ELEMENT
16/30332917 DC : 0 BS EN 13915 - PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS
17/30313628 DC : 0 BS EN ISO 20023 - SOLID BIOFUELS - SAFETY OF SOLID BIOFUEL PELLETS - SAFE HANDLING AND STORAGE OF WOOD PELLETS IN RESIDENTIAL AND OTHER SMALL-SCALE APPLICATIONS
BS EN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware Fire resistance of steel rolling shutter assemblies
DD CEN/TS 45545-3:2009 Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers
08/30093077 DC : DRAFT MAR 2008 BS EN 15269-10 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES
07/30171469 DC : DRAFT DEC 2007 BS EN 15080-15 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 15: LINEAR JOINT SEALS
UNE-EN 15269-7:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
UNI EN 13369 : 2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
16/30343249 DC : 0 BS EN 179 - BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS
PREN 13964 : DRAFT 2013 SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
EN 15254-4:2008+A1:2011 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
PREN 17064 : DRAFT 2016 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE
NF EN 1090-1 : 2009 + A1 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
I.S. EN 16153:2013 LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 15269-10:2011 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES
UNE-EN 15254-2:2010 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
I.S. EN 13369:2018 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
BS EN 1279-5 : 2005 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
UNE-EN 15080-8:2011 Extended application of results from fire resistance tests - Part 8: Beams
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
I.S. EN 15254-2:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NONLOADBEARING WALLS - PART 2: MASONRY AND GYPSUM BLOCKS
I.S. EN 50583-1:2016 PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES
UNE-EN 13815:2012 Fibrous gypsum plaster casts - Definitions, requirements and test methods
UNI EN 15269-1 : 2010 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS
ISO/TR 12470-2:2017 Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 2: Non-loadbearing elements
UNI EN 15269-2 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
17/30359220 DC : 0 BS EN 15269-20 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS
XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
17/30359850 DC : 0 BS EN 14178-2 - GLASS IN BUILDING - BASIC ALKALINE EARTH SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD
UNI EN 15254-4 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
PREN 1504-3 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
EN 15254-5:2018 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction
UNE-EN 15254-4:2009 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
BS EN 15254-4 : 2008 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
I.S. EN 15254-4:2008 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
I.S. EN 15283-2:2008 GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS
I.S. EN 15254-5:2009 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION
I.S. EN 12602:2016 PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE
EN 45545-1 : 2013 COR 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL
DIN EN 13658-2:2005-09 Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering
DIN EN 13658-1:2005-09 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
DIN EN 14246 E : 2006 GYPSUM ELEMENTS FOR SUSPENDED CEILINGS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN 179:2008-04 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009)
BS EN 1366-7:2004 Fire resistance tests for service installations Conveyor systems and their closures
BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures General rules - Structural fire design
UNE-EN 13964:2016 Suspended ceilings - Requirements and test methods
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
BS EN 1036-2:2008 Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard
BS EN 12150-2:2004 Glass in building. Thermally toughened soda lime silicate safety glass Evaluation of conformity/Product standard
BS EN 14496:2005 Gypsum based adhesives for thermal/acoustic insulation composite panelsa nd plasterboards. Definitions, requirements and test methods
BS EN 15319:2007 General principles of design of fibrous (gypsum) plaster works
UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
BS EN 13964:2014 Suspended ceilings. Requirements and test methods
BS EN 14081-1:2016 Timber structures. Strength graded structural timber with rectangular cross section General requirements
BS EN 13024-2:2004 Glass in building. Thermally toughened borosilicate safety glass Evaluation of conformity/Product standard
BS EN 14179-2:2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Evaluation of conformity/product standard
CEN/TR 15123:2005 Design, preparation and application of internal polymer plastering systems
EN 13063-3:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys
EN 13063-2:2005+A1:2007 Chimneys - System chimneys with clay/ceramic flue liners - Part 2: Requirements and test methods under wet conditions
EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
EN 50583-1:2016 Photovoltaics in buildings - Part 1: BIPV modules
EN 1366-3:2009 Fire resistance tests for service installations - Part 3: Penetration seals
DIN EN 14321-2:2005-10 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/Product standard
DIN EN 14600:2006-03 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
DIN EN 357:2005-02 GLASS IN BUILDING - FIRE-RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
DIN EN 13063-1:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 1: REQUIREMENTS AND TEST METHODS FOR SOOTFIRE RESISTANCE
DIN EN 14915:2013-12 SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
EN 15287-1:2007+A1:2010 Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances
EN 12209:2016 Building hardware - Mechanically operated locks and locking plates - Requirements and test methods
CEN/TR 15124:2005 Design, preparation and application of internal gypsum plastering systems
EN 13279-1:2008 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
DIN EN 13063-2:2007-10 CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 2: REQUIREMENTS AND TEST METHODS UNDER WET CONDITIONS
DIN EN 1090-1:2012-02 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011)
CEN/TS 45545-3:2009 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
DIN EN 14989-1:2007-05 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances

EN 13381-9:2015 Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
EN 15080-12:2011 Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
EN 1365-1:2012/AC:2013 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS
EN 15254-6 : 2014 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING
EN 1364-3:2014 FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY)
EN 1366-5:2010 Fire resistance tests for service installations - Part 5: Service ducts and shafts
EN 1365-3:1999 Fire resistance tests for loadbearing elements - Part 3: Beams
EN 1364-1:1999 Fire resistance tests for non-loadbearing elements - Part 1: Walls
EN 1634-3:2004/AC:2006 FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES
PREN 15269-6 : DRAFT 2015 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 6: FIRE RESISTANCE OF SLIDING TIMBER DOORSETS
EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods
EN 15269-3:2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows
EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
ISO 13943:2017 Fire safety — Vocabulary
EN 1366-4:2006+A1:2010 Fire resistance tests for service installations - Part 4: Linear joint seals
EN 15269-20:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets
EN 1994-1-2:2005/A1:2014 EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 15080-8:2009 Extended application of results from fire resistance tests - Part 8: Beams
EN 1366-7:2004 Fire resistance tests for service installations - Part 7: Conveyor systems and their closures
EN 13381-2:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes
EN 1366-6:2004 Fire resistance tests for service installations - Part 6: Raised access and hollow core floors
EN 15269-5:2014+A1:2016 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows
EN 1366-3:2009 Fire resistance tests for service installations - Part 3: Penetration seals
EN 13381-8:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members
EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
EN 1992-1-2:2004/AC:2008 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1364-4:2014 Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
EN ISO 13943:2017 Fire safety - Vocabulary (ISO 13943:2017)
EN 1363-1:2012 Fire resistance tests - Part 1: General Requirements
EN 15269-2 : 2012 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS
EN 13381-3:2015 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
PREN 15269-11 : DRAFT 2013 EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE OF OPERABLE FABRIC CURTAINS
EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
EN 15269-7:2009 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets
EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements
EN 15882-3:2009 Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals
EN 1996-1-2:2005/AC:2010 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1365-4:1999 Fire resistance tests for loadbearing elements - Part 4: Columns
EN 1999-1-2:2007/AC:2009 EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: STRUCTURAL FIRE DESIGN
EN 1363-2:1999 Fire resistance tests - Part 2: Alternative and additional procedures
EN 15269-10:2011 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies
EN 1993-1-2:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1365-5:2004 Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
EN 14135:2004 Coverings - Determination of fire protection ability
EN 15254-2:2009 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2: Masonry and Gypsum Blocks
ENV 13381-7:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
EN 15254-4:2008+A1:2011 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
EN 15882-4:2012 Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
EN 15725:2010/AC:2012 EXTENDED APPLICATION REPORTS ON THE FIRE PERFORMANCE OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS
EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
EN 1365-6:2004 Fire resistance tests for loadbearing elements - Part 6: Stairs

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.