• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 206-1:2000/A2:2005

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
Amendment of

EN 206-1:2000

Superseded date

01-12-2013

Published date

12-01-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
   3.1 Terms and definitions
   3.2 Symbols and abbreviations
4 Classification
   4.1 Exposure classes related to environmental actions
   4.2 Fresh concrete
        4.2.1 Consistence classes
        4.2.2 Classes related to maximum aggregate size
   4.3 Hardened concrete
        4.3.1 Compressive strength classes
        4.3.2 Density classes for light-weight concrete
5 Requirements for concrete and methods of verification
   5.1 Basic requirements for constituent materials
        5.1.1 General
        5.1.2 Cement
        5.1.3 Aggregates
        5.1.4 Mixing water
        5.1.5 Admixtures
        5.1.6 Additions (including mineral fillers and
              pigments)
   5.2 Basic requirements for composition of concrete
        5.2.1 General
        5.2.2 Selection of cement
        5.2.3 Use of aggregates
        5.2.4 Use of recycled water
        5.2.5 Use of additions
        5.2.6 Use of admixtures
        5.2.7 Chloride content
        5.2.8 Concrete temperature
   5.3 Requirements related to exposure classes
        5.3.1 General
        5.3.2 Limiting values for concrete composition
        5.3.3 Performance-related design methods
   5.4 Requirements for fresh concrete
        5.4.1 Consistence
        5.4.2 Cement content and water/cement ratio
        5.4.3 Air content
        5.4.4 Maximum aggregate size
   5.5 Requirements for hardened concrete
        5.5.1 Strength
        5.5.2 Density
        5.5.3 Resistance to water penetration
        5.5.4 Reaction to fire
6 Specification of concrete
   6.1 General
   6.2 Specification for designed concrete
        6.2.1 General
        6.2.2 Basic requirements
        6.2.3 Additional requirements
   6.3 Specification for prescribed concrete
        6.3.1 General
        6.3.2 Basic requirements
        6.3.3 Additional requirements
   6.4 Specification of standardized prescribed concrete
7 Delivery of fresh concrete
   7.1 Information from the user of the concrete to the
        producer
   7.2 Information from the producer of the concrete to
        the user
   7.3 Delivery ticket for ready-mixed concrete
   7.4 Delivery information for site-mixed concrete
   7.5 Consistence at delivery
8 Conformity control and conformity criteria
   8.1 General
   8.2 Conformity control for designed concrete
        8.2.1 Conformity control for compressive strength
        8.2.2 Conformity control for tensile splitting
              strength
        8.2.3 Conformity control for properties other than
              strength
   8.3 Conformity control of prescribed concrete including
        standardized prescribed concrete
   8.4 Actions in the case of non-conformity of the product
9 Production control
   9.1 General
   9.2 Production control systems
   9.3 Recorded data and other documents
   9.4 Testing
   9.5 Concrete composition and initial testing
   9.6 Personnel, equipment and installation
        9.6.1 Personnel
        9.6.2 Equipment and installation
   9.7 Batching of constituent materials
   9.8 Mixing of concrete
   9.9 Production control procedures
10 Evaluation of conformity
   10.1 General
   10.2 Assessment, surveillance and certification of
        production control
11 Designation for designed concrete
Annex A (normative) Initial test
Annex B (normative) Identity testing for compressive
        strength
Annex C (normative) Provisions for assessment, surveillance
        and certification of production control
Annex D (informative) Bibliography
Annex E (informative) Guidance on the application of the
        equivalent performance concept of concrete properties
Annex F (informative) Recommendations for limiting values
        of concrete compositions
Annex H (informative) Additional provisions for high
        strength concrete
Annex J (informative) Performance-related design methods
        with respect to durability
Annex K (informative) Concrete families
Figures
Tables

Pertains to concrete for structures cast in situ, precast structures, and structural precast products for buildings and civil engineering structures.

Committee
TC 104
DevelopmentNote
Supersedes ENV 206. (12/2002)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

I.S. CEN TR 15177:2006 TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE
07/30166070 DC : 0 BS EN 13230-4 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS
12/30265292 DC : 0 BS EN 12050-2 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
PD CEN/TR 16369:2012 Use of control charts in the production of concrete
BS EN 1504-9:2008 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity General principles for use of products and systems
DD ENV 13381-3:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members
12/30266154 DC : 0 BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS
BS EN 50119 : 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
08/30192726 DC : 0 BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
13/30277486 DC : 0 BS EN 16572 - CONSERVATION OF CULTURAL HERITAGE - GLOSSARY OF TECHNICAL TERMS CONCERNING MORTARS FOR MASONRY, RENDERS AND PLASTERS USED IN CULTURAL HERITAGE
03/310141 DC : DRAFT AUG 2003 EN 14754-1 - CURING COMPOUNDS - TEST METHODS - PART 1: DETERMINATION OF WATER RETENTION EFFICIENCY OF COMMON CURING COMPOUNDS
DIN V 1201:2004-08 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
12/30265289 DC : 0 BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
DIN EN 206-9:2010-09 CONCRETE - PART 9: ADDITIONAL RULES FOR SELF-COMPACTING CONCRETE (SCC)
PD CEN/TR 15678:2008 Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and for production concretes
PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
NF EN 15815 : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION
UNI EN 1504-9 : 2009 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS
04/30055611 DC : 0 BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
17/30351884 DC : 0 BS EN 12390-10 - TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE
DIN 1045-3:2012-03 Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures - Application rules for DIN EN 13670
15/30270279 DC : 0 BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS
PREN 1536 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
DIN EN 15815 E : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION
07/30166420 DC : DRAFT AUG 2007 BS EN 1520 - PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE
03/319412 DC : DRAFT NOV 2003 EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
08/30182206 DC : DRAFT SEP 2008 BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY
PREN 12050-2 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PRINCIPLES OF CONSTRUCTION AND TESTING - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
02/103630 DC : DRAFT MAY 2002 PREN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
BS EN 14490:2010 Execution of special geotechnical works. Soil nailing
03/314372 DC : DRAFT DEC 2003 BS EN 14845-1 - TEST METHODS FOR FIBRES IN CONCRETE - PART 1 - REFERENCE CONCRETES
08/30186605 DC : DRAFT OCT 2008 BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
08/30182212 DC : DRAFT SEP 2008 BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY
EN 12504-4:2004 Testing concrete - Part 4: Determination of ultrasonic pulse velocity
S.R. CWA 16633:2013 AGEING BEHAVIOUR OF STRUCTURAL COMPONENTS WITH REGARD TO INTEGRATED LIFETIME ASSESSMENT AND SUBSEQUENT ASSET MANAGEMENT OF CONSTRUCTED FACILITIES
I.S. EN 15037-4:2010 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
I.S. EN ISO 21809-5:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017)
UNI EN 15037-4 : 2013 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
13/30286967 DC : 0 BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
UNI EN 1047-2 : 2013 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
NF EN 14974 : 2006 + A1 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
S.R. CEN/TR 16563:2013 PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE
NF EN 12504-4 : 2005 TESTING CONCRETE - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY
BS EN 13791:2007 Assessment of in-situ compressive strength in structures and pre-cast concrete components
I.S. EN 13495:2002 THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) (FOAM BLOCK TEST)
DIN EN 1504-2:2015-03 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
DIN EN 1317-5:2012-06 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
DIN EN 40-4:2006-06 Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns
BS EN 40-4:2005 Lighting columns Requirements for reinforced and prestressed concrete lighting columns
BS EN 13495:2002 Thermal insulation products for building applications. Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS EN 450-1:2012 Fly ash for concrete Definition, specifications and conformity criteria
DIN EN 14992:2012-09 PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
BS EN 13877-1:2013 Concrete pavements Materials
UNE-EN 13877-2:2013 Concrete pavements - Part 2: Functional requirements for concrete pavements
BS EN 1992-1-1 : 2004 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN 12050-2:2015 Wastewater lifting plants for buildings and sites Lifting plants for faecal-free wastewater
BS EN 1996-2:2006 Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry
PD CEN/TR 15177:2006 Testing the freeze-thaw resistance of concrete. Internal structural damage
BS EN 14992 : 2007 PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
I.S. EN 13263-2:2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
DIN EN 1537:2001-01 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 13084-2:2007-08 Free-standing chimneys - Part 2: Concrete chimneys
DIN EN 1881:2007-01 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD
EN 13263-2:2005+A1:2009 Silica fume for concrete - Part 2: Conformity evaluation
CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
EN 13084-2:2007 Free-standing chimneys - Part 2: Concrete chimneys
EN 13057:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption
CEN/TR 16369:2012 Use of control charts in the production of concrete
DIN EN 12504-4:2004-12 Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity
EN 12620:2002+A1:2008 Aggregates for concrete
CEN/TR 15177:2006 Testing the freeze-thaw resistance of concrete - Internal structural damage
EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete
CEN/TS 14754-1:2007 Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
CEN/TR 16563:2013 Principles of the equivalent durability procedure
DIN EN 14650:2005-08 Precast concrete products - General rules for factory production control of metallic fibered concrete
EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater
EN 13139:2002/AC:2004 AGGREGATES FOR MORTAR
EN 1168:2005+A3:2011 Precast concrete products - Hollow core slabs
EN 13395-3:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete
EN 13495:2002 Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)
VDI/BV-BS 6205 Blatt 1:2012-04 Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - General principles
VDI/BV-BS 6205 Blatt 2:2012-04 Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market
ONORM EN 14487-1 : 2006 SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY
NACE SP 01 87 : 2017 DESIGN FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE
12/30259157 DC : 0 BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
09/30198700 DC : 0 BS EN 15037-4 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
14/30285784 DC : 0 BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS
S.R. CEN/TR 15678:2008 CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES
08/30189097 DC : DRAFT SEP 2008 BS ISO 12968 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-OFF RESISTANCE OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS (ETICS) (FOAM BLOCK TEST)
DIN 18218:2010-01 Pressure of fresh concrete on vertical formwork
09/30181168 DC : DRAFT JAN 2009 BS EN 1047-2 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
17/30348207 DC : DRAFT MAY 2017 BS ISO 19426-2 - STRUCTURES FOR MINE SHAFTS - PART 2: HEADFRAME STRUCTURES
14/30292283 DC : 0 BS EN 13230-2 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS
DIN EN 15037-4:2013-08 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
BS EN 13670:2009 Execution of concrete structures
04/19988805 DC : DRAFT OCT 2004 EN 15050 - PRECAST CONCRETE BRIDGE ELEMENTS
BS EN 206-9:2010 Concrete Additional rules for self-compacting concrete (SCC)
11/30215604 DC : 0 BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
PREN 1317-5 : DRAFT 2013 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA
09/30200088 DC : 0 BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
14/30292482 DC : 0 BS EN 13230-4 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS
NF EN 206-9 : 2010 CONCRETE - PART 9: ADDITIONAL RULES FOR SELF-COMPACTING CONCRETE (SCC)
DIN EN 14879-6:2010-04 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
DIN EN 15816:2011-06 Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain
14/30300225 DC : DRAFT JUNE 2014 BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
I.S. EN 13791:2007 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
10/30217031 DC : 0 EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
BS EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers
NF EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
BS EN ISO 21809-5:2017 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings
NF EN 15816 : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN
03/302294 DC : DRAFT APR 2003 EN 14650 - PRECAST CONCRETE PRODUCTS - GENERAL RULES FOR FACTORY PRODUCTION CONTROL OF METALLIC FIBRE CONCRETE
BS EN 15816:2011 Polymer modified bituminous thick coatings for waterproofing. Resistance to rain
12/30254408 DC : 0 BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
02/104236 DC : DRAFT JUNE 2002 EN 14487-1 - SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY
10/30218985 DC : DRAFT JUNE 2010 BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
ENV 13381-6:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
DD ENV 13381-6:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns
13/30282202 DC : 0 BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
PREN 12620 : DRAFT 2015 AGGREGATES FOR CONCRETE
03/306073 DC : DRAFT APR 2003 PREN 1544 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP UNDER SUSTAINED TENSILE LOAD FOR SYNTHETIC RESIN PRODUCTS (PC) FOR THE ANCHORING OF REINFORCING BARS
PREN 197-1 : DRAFT 2014 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
UNI EN 15815 : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION
I.S. EN 934-1:2008 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 1: COMMON REQUIREMENTS
BS EN 13369:2013 Common rules for precast concrete products
I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
I.S. ENV 13381-6:2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
ISO 21809-5:2017 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
S.R. CEN/TS 14754-1:2007 CURING COMPOUNDS - TEST METHODS - PART 1: DETERMINATION OF WATER RETENTION EFFICIENCY OF COMMON CURING COMPOUNDS
UNE-EN 14974:2006 Facilities for users of roller sports equipment - Safety requirements and test methods
15/30311094 DC : 0 BS EN 13139 - AGGREGATES FOR MORTAR
ISO 13270:2013 Steel fibres for concrete — Definitions and specifications
I.S. EN 50119:2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN EN 13263-2:2009-07 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
DIN EN 12839:2012-03 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
DIN EN 1537:2014-07 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
DIN EN 14487-1:2006-03 Sprayed concrete - Part 1: Definitions, specifications and conformity
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 12794:2007-08 PRECAST CONCRETE PRODUCTS - FOUNDATION PILES
DIN EN 1858:2016-08 (Draft) CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
DIN EN 14475:2006-04 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
BS EN 12794:2005 Precast concrete products. Foundation piles
BS EN 447:2007 Grout for prestressing tendons. Basic requirements
BS EN 12839:2012 Precast concrete products. Elements for fences
DIN EN 13978-1 E : 2005 PRECAST CONCRETE PRODUCTS - PRECAST CONCRETE GARAGES - PART 1: REQUIREMENTS FOR REINFORCED GARAGES MONOLITHIC OR CONSISTING OF SINGLE SECTIONS WITH ROOM DIMENSIONS
BS EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Concrete components
I.S. EN 13084-2:2007 FREE-STANDING CHIMNEYS - PART 2: CONCRETE CHIMNEYS
I.S. EN 1168:2005 PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
I.S. EN 1858:2008 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
I.S. EN 13877-1:2013 CONCRETE PAVEMENTS - PART 1: MATERIALS
I.S. EN 1317-5:2007 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
DIN EN 1996-1-1:2013-02 Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (includes Amendment 1:2012)
I.S. EN 450-1:2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
I.S. EN 13877-2:2013 CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS
I.S. EN 12446:2011 CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
I.S. EN 15050:2007 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
DIN EN 13577:2007-07 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
I.S. EN 197-1:2011 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
I.S. EN 12794:2005 Precast concrete products - Foundation piles
DIN EN 1857:2010-08 Chimneys - Components - Concrete flue liners
DIN EN 197-1:2011-11 Cement - Part 1: Composition, specifications and conformity criteria for common cements
I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 13263-1:2005 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
I.S. EN 845-2:2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
I.S. EN 447:2007 GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS
I.S. EN 12050-2:2015 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
DIN EN 13395-3:2002-09 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 3: TEST FOR FLOW OF REPAIR CONCRETE
I.S. EN 14844:2006 PRECAST CONCRETE PRODUCTS - BOX CULVERTS
I.S. EN 846-6:2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6 - DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST)
I.S. EN 1537:2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
I.S. EN 1996-1-1:2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 14992:2007 PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
I.S. EN 1857:2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
UNI EN 14487-2 : 2007 SPRAYED CONCRETE - PART 2: EXECUTION
UNI EN 15050 : 2012 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
VDI 4085:2017-04 Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials
VDI 3460 Blatt 1:2014-02 Emission control - Thermal waste treatment - Fundamentals
I.S. EN 14487-1:2005 SPRAYED CONCRETE - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY
ISO 19426-5:2018 Structures for mine shafts — Part 5: Shaft system structures
DIN V 4034-1:2004-08 PREFABRICATED CONCRETE MANHOLES, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - PART 1: REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
07/30171764 DC : 0 BS EN 206-9 - CONCRETE - PART 9: ADDITIONAL RULES FOR SELF-COMPACTING CONCRETE (SCC)
PREN 13230-4 : DRAFT 2014 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 4: PRESTRESSED BEARERS FOR SWITCHES AND CROSSINGS
DIN EN 13670:2011-03 Execution of concrete structures
DIN EN 14974 E : 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 1996-3:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 1996-2:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY (INCLUDING IRISH NATIONAL ANNEX)
I.S. EN 13670:2009 EXECUTION OF CONCRETE STRUCTURES
08/30192723 DC : 0 BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
DD CEN/TS 14754-1:2007 Curing compounds. Test methods Determination of water retention efficiency of common curing compounds
14/30292279 DC : 0 BS EN 13230-1 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS
12/30265301 DC : 0 BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
16/30348679 DC : 0 BS ISO 6707-1 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 1: GENERAL TERMS
NF EN 50119 : 2010 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
12/30265304 DC : 0 BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY
BS EN 15815:2011 Polymer modified bituminous thick coatings for waterproofing. Resistance to compression
PREN 16506 : DRAFT 2012 SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
08/30183125 DC : 0 BS EN 1857 - CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
BS ISO 13270:2013 Steel fibres for concrete. Definitions and specifications
DIN EN 15815:2011-06 Polymer modified bituminous thick coatings for waterproofing - Resistance to compression
04/19983213 DC : DRAFT AUG 2004 BS EN 14992 - PRECAST CONCRETE PRODUCTS - WALL ELEMENTS - PRODUCTS PROPERTIES AND PERFORMANCES
DIN 1045-4:2012-02 Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements
03/306075 DC : DRAFT APR 2003 BS EN 13791 - ASSESSMENT OF CONCRETE COMPRESSIVE STRENGTH IN STRUCTURES OR IN STRUCTURAL ELEMENTS
04/19983217 DC : DRAFT SEP 2004 BS EN 15021 - PRECAST CONCRETE SAFETY BARRIERS
03/310120 DC : DRAFT JUNE 2003 EN 1881 - 2ND CEN ENQUIRY PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PULL-OUT TEST OF REBAR FROM CONCRETE
04/30109196 DC : DRAFT FEB 2004 EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
12/30265307 DC : 0 BS EN 124-4 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL REINFORCED CONCRETE
07/30166095 DC : 0 EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
07/30172380 DC : 0 BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
DD ENV 13381-2:2002 Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes
17/30348216 DC : 0 BS ISO 19426-5 - STRUCTURES FOR MINE SHAFTS - PART 5: SHAFT SYSTEM STRUCTURES
13/30290130 DC : 0 BS EN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA
ISO 19426-2:2018 Structures for mine shafts — Part 2: Headframe structures
CEN/TR 15868:2009 Survey of national requirements used in conjunction with EN 206-1:2000
PD CEN/TR 15868:2009 Survey of national requirements used in conjunction with EN 206-1:2000
DIN EN 13369:2013-08 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
15/30310344 DC : 0 BS EN 12620 - AGGREGATES FOR CONCRETE
EN ISO 21809-5:2017 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
PREN 13381-5 : DRAFT 2011 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
DIN EN 14487-2:2007-01 Sprayed concrete - Part 2: Execution
DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN 1168:2011-12 Precast concrete products - Hollow core slabs (includes Amendment A3:2011)
DIN EN 13263-1:2009-07 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
DIN EN 934-1:2008-04 Admixtures for concrete, mortar and grout - Part 1: Common requirements
DIN EN 14992 E : 2012 PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
DIN EN 12446:2011-09 Chimneys - Components - Concrete outer wall elements
DIN EN 1996-2:2010-12 Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009)
DIN EN 12504-4 E : 2004 TESTING CONCRETE IN STRUCTURES - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY
DIN EN 1996-3:2010-12 Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009)
DIN EN 14844 E : 2012 PRECAST CONCRETE PRODUCTS - BOX CULVERTS (INCLUDES AMENDMENT A2:2011)
DIN EN 15050 E : 2012 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
DIN EN 13791:2008-05 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
BS EN 13084-2:2007 Free-standing chimneys Concrete chimneys
UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
BS EN 14650:2005 Precast concrete products. General rules for factory production control of metallic fibered concrete
BS EN 15050 : 2007 PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS
BS EN 13263-2 : 2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
BS EN 13395-3:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of repair concrete
BS EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete
BS EN 13880-12:2003 Hot applied joint sealants Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
DIN EN 15050:2012-06 Precast concrete products - Bridge elements (includes Amendment A1:2012)
DIN EN 13978-1:2005-07 PRECAST CONCRETE PRODUCTS - PRECAST CONCRETE GARAGES - PART 1: REQUIREMENTS FOR REINFORCED GARAGES MONOLITHIC OR CONSISTING OF SINGLE SECTIONS WITH ROOM DIMENSIONS
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
DIN EN 1858:2011-09 Chimneys - Components - Concrete flue blocks
DIN EN 1504-2:2005-01 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
I.S. EN 1992-1-1:2004 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNE-EN 15050:2008 Precast concrete products - Bridge elements
EN 846-6:2012 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
EN 13880-12:2003 Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
UNI EN 1168 : 2012 PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
UNI EN 14992 : 2012 PRECAST CONCRETE PRODUCTS - WALL ELEMENTS
UNI EN 12839 : 2012 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
UNI EN 846-6 : 2012 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST)
UNI EN 1537 : 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND ANCHORS
UNI EN 1857 : 2010 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
UNI EN 13139 : 2013 AGGREGATES FOR MORTAR
UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 1317-5 : 2012 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
UNI EN 13263-1 : 2009 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
UNI EN 12794 : 2007 PRECAST CONCRETE PRODUCTS - FOUNDATION PILES
UNI EN 197-1 : 2011 CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS
UNI EN 13791 : 2008 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
UNI EN 1996-2 : 2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
EN 15816:2011 Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 1504-10 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI EN 13263-2 : 2009 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
UNI EN 13577 : 2007 CHEMICAL ATTACK ON CONCRETE - DETERMINATION OF AGGRESSIVE CARBON DIOXIDE CONTENT IN WATER
UNI EN 15167-1 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI EN 13877-1 : 2013 CONCRETE PAVEMENTS - PART 1: MATERIALS
UNI EN 14844 : 2012 PRECAST CONCRETE PRODUCTS - BOX CULVERTS
EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
EN 14487-1:2005 Sprayed concrete - Part 1: Definitions, specifications and conformity
UNI EN 450-1 : 2012 FLY ASH FOR CONCRETE - PART 1: DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA
UNI CEN/TR 16369 : 2013 USE OF CONTROL CHARTS IN THE PRODUCTION OF CONCRETE
UNI EN 447 : 2007 GROUT FOR PRESTRESSING TENDONS - BASIC REQUIREMENTS
UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
UNI EN 1881 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - TESTING OF ANCHORING PRODUCTS BY THE PULL-OUT METHOD
UNI EN 1858 : 2012 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
UNI EN 14845-1 : 2007 TEST METHODS FOR FIBRES IN CONCRETE - PART 1: REFERENCE CONCRETES
UNI EN 14879-6 : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
UNI EN 14475 : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
UNI CEN/TR 16563 : 2013 PRINCIPLES OF THE EQUIVALENT DURABILITY PROCEDURE
UNI EN 934-1 : 2008 ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 1: COMMON REQUIREMENTS
UNI EN 12620 : 2013 AGGREGATES FOR CONCRETE
UNI EN 1996-1-1 : 2013 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
UNI EN 12446 : 2011 CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
UNI EN 13877-2 : 2013 CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS
16/30338749 DC : 0 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
08/30186613 DC : DRAFT OCT 2008 BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
EN 14974:2006+A1:2010 Facilities for users of roller sports equipment - Safety requirements and test methods
12/30275810 DC : 0 BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL)
DD ENV 13381-5:2002 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet composite members
01/104967 DC : DRAFT JUN 2001 PREN 197-3 - CEMENT - PART 3: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR LOW HEAT COMMON CEMENTS
BS EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns
ENV 13381-2:2002 Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes
ENV 13381-3:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
DIN EN 14490:2010-11 Execution of special geotechnical works - Soil nailing
UNI EN ISO 21809-5 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
08/30186609 DC : DRAFT OCT 2008 BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
03/314376 DC : DRAFT DEC 2003 EN 14487-2 - SPRAYED CONCRETE - PART 2: EXECUTION
14/30292479 DC : 0 BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
DIN EN 15816 E : 2011 POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN
08/30186617 DC : DRAFT OCT 2008 BS EN 13381-6 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
UNE-EN 15815:2011 Polymer modified bituminous thick coatings for waterproofing - Resistance to compression
PD CEN/TR 16142:2011 Concrete. A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
10/30231844 DC : DRAFT SEP 2010 BS EN 13225 - PRECAST CONCRETE PRODUCTS - LINEAR STRUCTURAL ELEMENTS
DIN EN 13381-6:2012-09 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
PREN 13230-1 : DRAFT 2014 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 1: GENERAL REQUIREMENTS
DIN EN 1504-9:2008-11 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPALS FOR THE USE OF PRODUCTS AND SYSTEMS
PD CEN/TR 16563:2013 Principles of the equivalent durability procedure
PREN 13139 : DRAFT 2015 AGGREGATES FOR MORTAR
UNE-EN 13369:2013 Common rules for precast concrete products
14/30304113 DC : 0 BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS
12/30259154 DC : 0 BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
BS ISO 6707-1:2017 Buildings and civil engineering works. Vocabulary General terms
07/30166067 DC : 0 BS EN 13230-3 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
02/101724 DC : DRAFT FEB 2002 PREN 13863-4 - CONCRETE PAVEMENTS - TEST METHODS FOR FUNCTIONAL REQUIREMENTS - PART 4: DETERMINATION OF THE THICKNESS OF A CONCRETE SLAB
UNI CEN/TR 15678 : 2008 CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES
07/30156249 DC : 0 BS EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS
07/30156246 DC : 0 BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
08/30160023 DC : DRAFT AUG 2008 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
NF EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
UNI EN 15816 : 2011 POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN
DIN EN 14490 E : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
PREN 13230-3 : DRAFT 2014 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS
I.S. EN 12504-4:2004 TESTING CONCRETE - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY
I.S. EN 14879-6:2009 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
I.S. ENV 13381-5:2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS
ACI 234R : 2006 GUIDE FOR THE USE OF SILICA FUME IN CONCRETE
UNI EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
ACI 364.3R : 2009 GUIDE FOR CEMENTITIOUS REPAIR MATERIAL DATA SHEET
BS EN 14974 : 2006 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
PREN 845-2 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
PREN 13230-2 : DRAFT 2014 RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 2: PRESTRESSED MONOBLOCK SLEEPERS
PREN 12050-1 : DRAFT 2012 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER
I.S. EN 15815:2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION
BS EN 1047-2 : 2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
EN 1047-2:2009+A1:2013 Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
DIN EN 1047-2:2013-05 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
PREN 1992-4 : DRAFT 2013 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
I.S. EN 14490:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
S.R. CR 13902:2000 TEST METHODS FOR DETERMINING THE WATER/CEMENT RATIO OF FRESH CONCRETE
IEC 60913:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
I.S. EN 15816:2011 POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN
I.S. ENV 13381-2:2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES
I.S. ENV 13381-3:2002 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS
EN 12794:2005+A1:2007/AC:2008 PRECAST CONCRETE PRODUCTS - FOUNDATION PILES
I.S. EN 12839:2012 PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES
DIN EN 14475 E : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN 12050-2:2015-05 WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER
DIN EN 14650 E : 2005 PRECAST CONCRETE PRODUCTS - GENERAL RULES FOR FACTORY PRODUCTION CONTROL OF METALLIC FIBERED CONCRETE
BS EN 13263-1 : 2005 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
BS EN 14487-1:2005 Sprayed concrete Definitions, specifications and conformity
BS EN 14475:2006 Execution of special geotechnical works. Reinforced fill
UNE-EN 1857:2013 Chimneys - Components - Concrete flue liners
BS EN 14845-1:2007 Test methods for fibres in concrete Reference concretes
UNE-EN 1504-2:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
BS EN 14487-2:2006 Sprayed concrete Execution
BS EN 12620:2013 Aggregates for concrete
BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
UNE-EN 13877-1:2013 Concrete pavements - Part 1: Materials
BS EN 1858 : 2008 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
I.S. EN 50119:2020 Railway applications - Fixed installations - Electric traction overhead contact lines
UNE-EN 12839:2012 Precast concrete products - Elements for fences
BS EN 1857 : 2003 CHIMNEYS - COMPONENTS - CONCRETE FLUE LINERS
BS EN 13978-1:2005 Precast concrete products. Precast concrete garages Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
UNE-EN 846-6:2015 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
UNE-EN 12446:2012 Chimneys - Components - Concrete outer wall elements
BS EN 934-1:2008 Admixtures for concrete, mortar and grout Common requirements
BS EN 13139:2013 Aggregates for mortar
BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
BS EN 13057:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption
UNE-EN 14475:2011 Execution of special geotechnical works - Reinforced fill
BS EN 1996-1-1 : 2005 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES
DIN EN 14844:2012-02 Precast concrete products - Box culverts (includes Amendment A2:2011)
BS EN 1008:2002 Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BS EN 1881:2006 Products and systems for the protection and repair of concrete structures. Test methods. Testing of anchoring products by the pull-out method
IEC 62271-202:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
BS EN 846-6:2012 Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
BS EN 13577:2007 Chemical attack on concrete. Determination of aggressive carbon dioxide content in water
UNE-EN 14844:2007 Precast concrete products - Box culverts
BS EN 12504-4:2004 Testing concrete Determination of ultrasonic pulse velocity
BS EN 13877-2:2013 Concrete pavements Functional requirements for concrete pavements
UNE-EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
UNE-EN 13670:2013 Execution of concrete structures
EN 50119 : 2009 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
UNE-EN 450-1:2013 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
BS EN 1317-5 : 2007 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
UNE-EN 12050-2:2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater
BS EN 197-1:2011 Cement Composition, specifications and conformity criteria for common cements
CEN/TR 15678:2008 Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes
DIN EN 447:2017-09 Grout for prestressing tendons - Basic requirements
EN 450-1:2012 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 14650:2005 Precast concrete products - General rules for factory production control of metallic fibered concrete
EN 40-4:2005/AC:2006 LIGHTING COLUMNS - PART 4: REQUIREMENTS FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS
EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 845-2:2013+A1:2016 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 1996-1-1:2005+A1:2012 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-3:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES
EN 1881:2006 Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
EN 14490:2010 Execution of special geotechnical works - Soil nailing
EN 1537:2013 Execution of special geotechnical works - Ground anchors
EN 15815:2011 Polymer modified bituminous thick coatings for waterproofing - Resistance to compression
EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes
EN 15037-4:2010+A1:2013 Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks
EN 1996-2:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY
EN 14879-6:2009 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 1857:2010 Chimneys - Components - Concrete flue liners
EN 13877-1:2013 Concrete pavements - Part 1: Materials
EN 14844:2006+A2:2011 Precast concrete products - Box culverts
EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
EN 1858:2008+A1:2011 CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS
EN 447:2007 Grout for prestressing tendons - Basic requirements
EN 1504-9:2008 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
EN 13978-1 : 2005 PRECAST CONCRETE PRODUCTS - PRECAST CONCRETE GARAGES - PART 1: REQUIREMENTS FOR REINFORCED GARAGES MONOLITHIC OR CONSISTING OF SINGLE SECTIONS WITH ROOM DIMENSIONS
EN 13877-2:2013 Concrete pavements - Part 2: Functional requirements for concrete pavements
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 14992:2007+A1:2012 Precast concrete products - Wall elements
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 13670:2009 Execution of concrete structures
EN 14475:2006/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 206-9:2010 Concrete - Part 9: Additional Rules for Self-compacting Concrete (SCC)
EN 15050:2007+A1:2012 Precast concrete products - Bridge elements
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 934-1:2008 Admixtures for concrete, mortar and grout - Part 1: Common requirements
EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
EN 13791:2007 Assessment of in-situ compressive strength in structures and precast concrete components
EN 14487-2:2006 Sprayed concrete - Part 2: Execution
04/19983215 DC : DRAFT AUG 2004 BS EN 14990 - PRECAST CONCRETE PRODUCTS - ROAD TRAFFIC NOISE REDUCING DEVICES AND BARRIERS - REQUIREMENTS AND TEST METHODS
DIN EN 14879-6 E : 2010 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS
12/30256050 DC : 0 BS EN 16382 - THERMAL INSULATION PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE PULL-THROUGH RESISTANCE OF ANCHORS THROUGH THERMAL INSULATION PRODUCTS
S.R. CEN/TR 16369:2012 USE OF CONTROL CHARTS IN THE PRODUCTION OF CONCRETE
DIN 4226-1:2001-07 AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES
11/30203534 DC : DRAFT AUG 2011 BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS
CEN/TR 16142:2011 Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
UNE-EN ISO 21809-5:2018 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
I.S. EN 13381-6:2012 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
07/30151256 DC : 0 BS EN 13670 - EXECUTION OF CONCRETE STRUCTURES
I.S. EN 1047-2:2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
PREN 1538 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
12/30265316 DC : 0 BS EN 124-2 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 2: GULLY TOPS AND MANHOLE TOPS MADE FROM CAST IRON
12/30265747 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
UNE-EN 13381-6:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
07/30163668 DC : 0 BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES
UNI EN 206-9 : 2010 CONCRETE - PART 9: ADDITIONAL RULES FOR SELF-COMPACTING CONCRETE (SCC)
UNE-EN 1996-1-1:2011 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
ENV 13381-5:2002 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members
04/19991587 DC : DRAFT MAY 2004 BS EN 1504-6 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 6: ANCHORING OF REINFORCING STEEL BAR
UNI EN 13670 : 2010 EXECUTION OF CONCRETE STRUCTURES
UNI EN 13369 : 2013 COMMON RULES FOR PRECAST CONCRETE PRODUCTS
UNI CEN/TS 14754-1 : 2007 CURING COMPOUNDS - TEST METHODS - PART 1: DETERMINATION OF WATER RETENTION EFFICIENCY OF COMMON CURING COMPOUNDS
UNE-EN 14490:2013 Execution of special geotechnical works - Soil nailing
I.S. EN 1504-9:2008 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS
UNI EN 13381-6 : 2012 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
I.S. EN 206-9:2010 CONCRETE - PART 9: ADDITIONAL RULES FOR SELF-COMPACTING CONCRETE (SCC)
UNE-EN 12602:2011 Prefabricated reinforced components of autoclaved aerated concrete
BS EN 15037-4 : 2010 PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS
PREN 12390-10 : DRAFT 2017 TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE
UNI EN 14974 : 2010 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
ISO 6707-1:2017 Buildings and civil engineering works Vocabulary Part 1: General terms
XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
UNE-EN 15816:2011 Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain
S.R. CEN/TR 16142:2011 CONCRETE - A STUDY OF THE CHARACTERISTIC LEACHING BEHAVIOUR OF HARDENED CONCRETE FOR USE IN THE NATURAL ENVIRONMENT
ISO 12968:2010 Thermal insulation products for building applications Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)
I.S. EN 14974:2006 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 13877-2:2013-06 CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS
DIN EN 13877-1:2013-06 CONCRETE PAVEMENTS - PART 1: MATERIALS
DIN EN 1992-1-1:2011-01 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
BS EN 1168 : 2005 PRECAST CONCRETE PRODUCTS - HOLLOW CORE SLABS
BS EN 12446:2011 Chimneys. Components. Concrete outer wall elements
BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
BS EN 14844 : 2006 PRECAST CONCRETE PRODUCTS - BOX CULVERTS
BS EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Definitions, specifications and conformity criteria
BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
BS EN 1537:2013 Execution of special geotechnical works. Ground anchors
DIN EN 14974:2010-12 FACILITIES FOR USERS OF ROLLER SPORTS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 13395-2:2002 Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
EN 13577:2007 Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
EN 12446:2011 Chimneys - Components - Concrete outer wall elements
EN 1317-5:2007+A2:2012/AC:2012 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
DIN EN 14845-1:2007-09 Test methods for fibres in concrete - Part 1: Reference concretes
DIN EN 13880-12:2003-11 HOT-APPLIED JOINT SEALANTS - PART 12: TEST METHOD FOR THE MANUFACTURE OF CONCRETE TEST BLOCKS FOR BOND TESTING (RECIPE METHODS)
EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
EN 12839:2012 Precast concrete products - Elements for fences
EN 13862:2001+A1:2009 Floor cutting-off machines - Safety
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
DIN EN 450-1:2012-10 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
DIN EN 846-6:2012-11 METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 6: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (SINGLE END TEST)

EN 12390-3:2009/AC:2011 TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
EN 45501 : 2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 12390-8:2009 Testing hardened concrete - Part 8: Depth of penetration of water under pressure
CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete
EN 196-2:2013 Method of testing cement - Part 2: Chemical analysis of cement
EN 197-1:2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements
ISO 7980:1986 Water quality Determination of calcium and magnesium Atomic absorption spectrometric method
CR 13901:2000 The use of the concept of concrete families for the production and conformity control of concrete
EN 12504-3:2005 Testing concrete in structures - Part 3: Determination of pull-out force
EN 12350-2:2009 Testing fresh concrete - Part 2: Slump-test
EN 12350-6:2009 Testing fresh concrete - Part 6: Density
ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming
DIN 4030-2:2008-06 ASSESSMENT OF WATER, SOIL AND GASES FOR THEIR AGGRESSIVENESS TO CONCRETE - PART 2: SAMPLING AND ANALYSIS OF WATER AND SOIL SAMPLES
EN 12390-7:2009 Testing hardened concrete - Part 7: Density of hardened concrete
PREN 13791 : DRAFT 2017 ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS
1990/384/EEC : 1990 COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 12390-5:2009 Testing hardened concrete - Part 5: Flexural strength of test specimens
EN 12350-3:2009 Testing fresh concrete - Part 3: Vebe test
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 45501:2015 METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS
EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 12504-2:2012 TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 12350-5:2009 Testing fresh concrete - Part 5: Flow table test
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
EN 12620:2002+A1:2008 Aggregates for concrete
EN 12390-1:2012 TESTING HARDENED CONCRETE - PART 1: SHAPE, DIMENSIONS AND OTHER REQUIREMENTS FOR SPECIMENS AND MOULDS
EN 12504-4:2004 Testing concrete - Part 4: Determination of ultrasonic pulse velocity
EN 12350-4:2009 Testing fresh concrete - Part 4: Degree of compactability
EN 450 : 1994 FLY ASH FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND QUALITY CONTROL
EN 12390-2:2009 Testing hardened concrete - Part 2: Making and curing specimens for strength tests
ISO 9001:2015 Quality management systems — Requirements
EN 12350-1:2009 Testing fresh concrete - Part 1: Sampling
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
ENV 13670-1 : DRAFT 2000 EXECUTION OF CONCRETE STRUCTURES - PART 1 - COMMON
ISO 4316:1977 Surface active agents Determination of pH of aqueous solutions Potentiometric method
ISO 7150-2:1986 Water quality Determination of ammonium Part 2: Automated spectrometric method
EN 12390-6:2009 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
EN 12878:2014 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
EN 12350-7:2009 Testing fresh concrete - Part 7: Air content - Pressure methods
ISO 7150-1:1984 Water quality — Determination of ammonium — Part 1: Manual spectrometric method
EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
ENV 1992-1-1 : DRAFT 91 COR 1992 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES AND RULES FOR BUILDINGS
CR 1901:1995 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.