EN ISO 12402-7:2006/A1:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
22-10-2020
01-04-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and components
Annex A (informative) - Mildew resistance of materials:
Soil burial method
Annex B (informative) - Abrasion resistance of cloth:
Oscillatory method (Wyzenbeek method)
Annex C (informative) - Example of a design drawing
Annex ZA (informative) - Relationship between this
International Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
Describes the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.
Committee |
CEN/TC 162
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ONORM EN ISO 12402-7 : 2015 | Identical |
ISO 12402-7:2006 | Identical |
NBN EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
NEN EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
NS EN ISO 12402-7 : 2006 AMD 1 2011 | Identical |
I.S. EN ISO 12402-7:2006 | Identical |
PN EN ISO 12402-7 : 2008 AMD 1 2011 | Identical |
SN EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
UNI EN ISO 12402-7 : 2011 | Identical |
UNE-EN ISO 12402-7:2007 | Identical |
BS EN ISO 12402-7 : 2007 | Identical |
NF EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
DIN EN ISO 12402-7:2015-08 (Draft) | Identical |
DIN EN ISO 12402-7:2007-03 | Identical |
UNI EN ISO 12402-7:2021 | Identical |
DS EN ISO 12402-7 : 2007 AMD 1 2011 | Identical |
BS EN ISO 12402-7:2007+A1:2011 | Identical |
I.S. EN 15649-3:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
DIN EN 16509:2014-12 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
15/30313590 DC : 0 | BS ISO 25649-3 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
00/562463 DC : DRAFT MAY 2000 | PREN ISO 12402-3 - PERSONAL FLOTATION DEVICES - PART 3: CLASS C (OFFSHORE LIFEJACKETS - 150 N), SAFETY REQUIREMENTS |
12/30212156 DC : 0 | BS EN 13138-3:2007 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
BS EN 16509:2014 | Transportable gas cylinders. Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders). Design, construction, filling and testing |
DIN EN 13138-1:2015-02 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
UNE-EN 13138-1:2015 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
UNE-EN 15649-3:2010 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices |
12/30257003 DC : 0 | BS EN 16509 - TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, SEAMLESS STEEL CYLINDERS OF CAPACITIES UP TO 120ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, FILLING AND TESTING |
I.S. EN 16509:2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
BS EN 13138-1:2008 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn |
I.S. EN 13138-1:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
PREN 13138-3 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
00/562462 DC : DRAFT MAY 2000 | PREN ISO 12402-2 - PERSONAL FLOTATION DEVICES - PART 2: CLASS B (OFFSHORE LIFEJACKETS, EXTREME CONDITIONS - 275 N), SAFETY REQUIREMENTS |
UNE-EN 16509:2015 | Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing |
DIN EN 15649-3:2012-03 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
00/562461 DC : DRAFT MAY 2000 | PREN ISO 12402-1 - PERSONAL FLOTATION DEVICES - PART 1: CLASS A (SOLAS LIFEJACKETS), SAFETY REQUIREMENTS |
07/30161901 DC : 0 | BS EN 15649-3 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
BS EN 15649-3 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
UNI EN 16509 : 2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
EN 16509:2014 | Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing |
EN 15649-3:2009+A1:2012 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices |
DIN EN 16509 E : 2014 | TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING |
UNI EN 15649-3 : 2012 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 3: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS A DEVICES |
EN 13138-1:2014 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
UNI EN 13138-1 : 2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
ISO 4892-1:2016 | Plastics Methods of exposure to laboratory light sources Part 1: General guidance |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 12402-5:2006 | Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements |
ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
ISO 9073-4:1997 | Textiles Test methods for nonwovens Part 4: Determination of tear resistance |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
ISO 12402-3:2006 | Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements |
ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
ISO 12402-1:2005 | Personal flotation devices Part 1: Lifejackets for seagoing ships Safety requirements |
ISO 2062:2009 | Textiles Yarns from packages Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester |
ISO 12402-2:2006 | Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements |
ISO 1926:2009 | Rigid cellular plastics Determination of tensile properties |
ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
ISO 5470-2:2003 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader |
ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 7229:2015 | Rubber- or plastics-coated fabrics — Measurement of gas permeability |
ISO 12402-6:2006 | Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods |
ISO 12402-4:2006 | Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements |
FED-STD-191 Revision A:1978 | TEXTILE TEST METHODS |
ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
ISO 12402-10:2006 | Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.