• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 3170:2004

Current
Current

The latest, up-to-date edition.

Petroleum liquids - Manual sampling (ISO 3170:2004)
Published date

01-02-2004

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principles
5 Apparatus
   5.1 General
   5.2 Tank samplers
   5.3 Drum and can samplers
   5.4 Pipeline samplers
   5.5 Sample receivers, vessels and containers
   5.6 Container closures
   5.7 Sample coolers
6 Safety precautions
7 Procedures for homogeneous petroleum liquids
   7.1 Introduction
   7.2 Precautions
   7.3 Tank sampling
   7.4 Pipeline sampling
   7.5 Dispenser (nozzle) sampling
8 Procedures for crude oils and other non-homogeneous
   petroleum liquids
   8.1 General
   8.2 Procedures
9 Sample handling
   9.1 General
   9.2 Homogenization of samples
   9.3 Verification of mixing efficiency
   9.4 Transfer of samples
10 Sampling of tank residues/deposits
11 Package sampling
   11.1 Statistical aspects of sampling packages
   11.2 Procedures for sampling packages
Annex A (informative) Guidance on safety precautions
Bibliography

ISO 3170:2004 specifies the manual methods to be used for obtaining samples of liquid or semi-liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines.ISO 3170:2004 applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 degrees Celsius.The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).

Committee
CEN/TC 19
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

BS 2000-609(2012) : 2012 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
BS EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
DIN EN 16715 E : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
13/30275105 DC : 0 BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
UNE-EN 15721:2014 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
14/30299493 DC : 0 BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
DIN EN 16136:2015-04 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
09/30206692 DC : 0 BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
BS EN 16997:2017 Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method
PD CEN/TR 16557:2013 Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination
10/30228224 DC : 0 BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
DIN EN 16900 E : 2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
BS EN 16329:2013 Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
I.S. EN 14517:2004 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
12/30267087 DC : 0 BS EN 16476 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOLD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
I.S. EN 14078:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS EN 15837:2009 Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
BS EN 16640:2017 Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method
I.S. EN 12662:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
S.R. CEN/TR 15367-2:2007 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 2: AUTOMOTIVE PETROL FUELS
BS 2000-579(2009) : 2009 COR 2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
09/30205523 DC : 0 BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
BS EN 16761-1:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique
06/30147351 DC : DRAFT MAR 2006 EN 15486 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULPHUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
BS EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
DIN EN 16761-1 E : 2016 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
I.S. EN 116:2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
UNE-EN 16934:2018 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
BS 2000-465(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD
13/30274224 DC : 0 BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS EN 15938:2010 Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
DIN EN 15691 E : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
UNE-EN 14865-1:2010 Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
DIN EN 15794:2010-02 Determination of explosion points of flammable liquids
14/30294038 DC : 0 BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHY METHOD
DIN EN 15691:2009-07 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
DIN EN 15692:2009-08 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
BS 2000-606(2015) : 2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
BS EN 16143:2013 Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis
DIN EN 16568 E : 2015 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
S.R. CEN TS 15293:2011 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
12/30258729 DC : 0 BS EN 15721 - ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
I.S. EN 14522:2005 DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS
BS EN 16135:2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
11/30244505 DC : 0 BS EN 16294 - PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICPOES)
PD CEN/TR 14489:2005 Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment
I.S. EN 16144:2012 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
13/30277078 DC : 0 BS EN 16568 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
DD CEN/TS 15293:2011 Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
BS EN 15944:2010 Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES)
12/30264358 DC : 0 BS EN 1601 - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID)
IP 606 : 2016 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
PD CEN/TR 17103:2017 Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination
08/30181649 DC : DRAFT JULY 2008 BS EN 15837 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC DIRECT METHOD
06/30147357 DC : DRAFT MAR 2006 EN 15488 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
IP PM EA : 2013 DETERMINATION OF THE FILTER BLOCKING TENDENCY OF FATTY ACID METHYL ESTERS (FAME) AND DIESEL FUELS CONTAINING FAME - COLD SOAK AND FILTRATION METHOD
S.R. CEN/TR 16557:2013 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
IP 336 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 16785-1:2015 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
IP 309 : 2016 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
I.S. EN 16934:2017 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
S.R. CEN/TS 15940:2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 16143:2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
S.R. CEN/TS 16640:2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
I.S. EN 15837:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
I.S. EN 16715:2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
UNE-EN 15779:2010 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
BS 2000-595(2011) : 2011 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
DIN EN 16640:2015-09 (Draft) BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
BS EN 12916:2016 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
DIN EN 16997:2016-05 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
S.R. CWA 16379:2011 FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS
BS 2000-509(2013) : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
17/30363912 DC : 0 BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE
I.S. EN 16640:2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
S.R. CEN/TR 17103:2017 FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
EN 16734:2016 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
BS 2000-547(2006) : 2006 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
BS 2000-574(2014) : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
I.S. EN 13016-3:2018 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD)
I.S. CEN TR 15522-1:2006 OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 1: SAMPLING
BS EN 16709 : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
I.S. EN 15484:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
I.S. EN 13132:2000 LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY USING COLUMN SWITCHING
I.S. EN 228:2017 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
I.S. EN 15553:2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
DIN EN 14275 E : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
DIN EN ISO 20823 E : 2003 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST
BS EN 14538:2006 Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
BS EN 14517:2004 Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method
BS EN 15490:2007 Ethanol as a blending component for petrol. Determination of pHe
BS EN 12952-15:2003 Water-tube boilers and auxiliary installations Acceptance tests
BS EN 15487:2007 Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
BS EN ISO 20783-2:2003 Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFB
BS EN 15485:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
BS EN 15199-2:2006 Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel
BS EN 15491:2007 Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
BS EN 12662:2014 Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
BS EN 14077:2003 Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method
BS EN 14078:2014 Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method
DIN EN 15490:2007-11 Ethanol as a blending component for petrol - Determination of pHe
DIN EN 15938:2010-12 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
EN 12766-1:2000 Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
ONORM EN 15491 : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
DIN EN 228:2004-03 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 15485:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
DIN EN 15488:2007-11 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
DIN EN 15489:2007-11 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
DIN EN 15944:2011-02 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
DIN EN 15199-1:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
CEN/TS 16640 : 2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
DIN EN 1601:2017-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
EN 16640:2017/AC:2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
DIN EN 15484:2007-11 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
EN 13016-2:2007 Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure(AVP) between 40 C and 100 C
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
DIN EN 14832:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
ONORM EN 15691 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
UNI EN 16568:2023 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
I.S. EN 14865-2:2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
DIN EN 16294:2013-02 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
PREN 12662 : DRAFT 2012 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
14/30294041 DC : 0 BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS
BS 2000-606(2012) : 2012 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL - GAS CHROMATOGRAPHIC METHOD
BS EN 16715:2015 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
S.R. CWA 15940:2009 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
PREN 16135 : DRAFT 2010 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS)
13/30286630 DC : 0 BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
05/30143114 DC : DRAFT DEC 2005 EN 13016-2 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C
I.S. EN 14213:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
13/30277780 DC : 0 BS EN 16576 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DISTILLATE FUELS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS 2000-552(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
BS 2000-581(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
08/30183846 DC : DRAFT AUG 2008 BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
05/30143111 DC : DRAFT DEC 2005 EN 13016-1 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
DIN EN 16761-1:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
ONORM EN 15199-3 : 2009 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
UNE-EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
BS EN 16270:2015 Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method
I.S. EN 16734:2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
DIN EN 15199-4 E : 2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
16/30336853 DC : 0 BS EN 16997 - LIQUID PETROLEUM PRODUCT - DETERMINATION OF SULFUR CONTENT IN ETHANOL CONTAINING PETROL E85 - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
12/30268200 DC : 0 BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
DIN EN 16576 E : 2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
06/30147366 DC : DRAFT MAR 2006 EN 15491 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
I.S. EN 16900:2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
PREN 15487 : DRAFT 2006 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
DIN EN 15721:2013-12 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
14/30298209 DC : 0 BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
06/30147369 DC : 0 EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - ION CHROMATOGRAPHIC METHOD
BS 2000-555(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
DIN EN 15751 E : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
PD CEN/TR 15367-3:2009 Petroleum products. Guide for good housekeeping Prevention of cross contamination
10/30205520 DC : 0 BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
PREN 13016-3 : DRAFT 2016 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD)
PREN 15195 : DRAFT 2013 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
06/30147360 DC : DRAFT MAR 2006 EN 15489 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
DIN EN 15492:2012-04 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
06/30147363 DC : DRAFT MAR 2006 EN 15490 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
PREN 15721 : DRAFT 2012 ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
PREN 17057 : DRAFT 2016 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID
BS EN 15199-4:2015 Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil
BS 2000-480(2006) : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
BS 2000-589(2015) : 2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS 2000-557(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
I.S. EN 15199-3:2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
PREN 15492 : DRAFT 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
DIN EN 15492 E : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
DIN EN 14832 E : 2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
I.S. EN 15376:2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
PREN 16761-2 : DRAFT 2014 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
BS 2000-588(2011) : 2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
I.S. EN 16709:2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
UNE-EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
DIN EN 15940:2016-09 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 16136:2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
I.S. EN 16091:2011 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
I.S. EN 61221:2004 PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS
EN 16709:2015/AC:2016 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS 2000-462(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
CR 13838:2000 Automotive diesel fuels - Determination of filtrability - AGELFI method
UNI EN 15691 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
BS EN 16136:2015 Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
UNI EN 16091 : 2012 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
UNI EN 15492 : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD
DIN EN 590:2017-10 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
UNE-EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN 17057:2018 Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID
UNI EN 15779 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI EN 15794 : 2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
I.S. EN 14865-1:2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
I.S. EN 15692:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
I.S. EN 237:2004 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY
I.S. EN 12916:2016 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
I.S. EN 15491:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
I.S. EN 15486:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
I.S. EN 15691:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
DIN EN 1601:2016-06 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
DIN EN 15491 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
DIN EN 15490 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
DIN EN 13016-2:2007-11 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C
DIN EN 12662:2014-07 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
DIN EN 14105:2011-07 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
DIN EN 14275:2013-05 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
DIN EN 12952-15 E : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 15: ACCEPTANCE TESTS
DIN EN 14214:2014-06 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNE-EN 1601:2018 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
ISO 4263-2:2003 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids
BS EN ISO 14935:1999 Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
I.S. EN ISO 8754:2003 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 15199-2:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
I.S. EN 15199-1:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
DIN EN 12662:1998-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
EN 14112:2016 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
I.S. EN 14105:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
UNI EN 14105 : 2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
I.S. EN 14275:2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
EN 15199-1:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
EN 15199-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
I.S. EN 14112:2016 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
EN 14105:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
DIN EN 16640:2017-08 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
BS EN 16576:2014 Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method
BS 2000-239(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS)
DIN EN 15721 E : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
UNI EN 15751 : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS EN 15199-3:2008 Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil
08/30176795 DC : DRAFT APR 2008 BS EN 15779 - FATS AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES - DETERMINATION OF POLY-UNSATURATED FATTY ACID METHYL ESTERS BY GAS CHROMATOGRAPHY
01/122379 DC : DRAFT JULY 2001 BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
BS EN 15751:2014 Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method
10/30216576 DC : 0 BS EN 16091 - LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
14/30300905 DC : 0 BS EN 16761-2 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
PD CEN/TR 16514:2013 Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
07/30169525 DC : 0 BS EN 15721 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
13/30282501 DC : 0 BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
BS 2000-309(2015) : 2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
09/30199323 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS
DIN EN 15779:2013-12 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser
14/30295249 DC : 0 BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
BS 2000-156(2007) : 2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
I.S. EN 16896:2016 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
BS 2000-433(1999) : 1999 PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE S-RAY FLUORESCENCE SPECTROMETRY (IDENTICAL WITH IP 433/1999)
10/30228221 DC : 0 BS EN 16135 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS)
UNI EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
03/314577 DC : DRAFT OCT 2003 EN 14832 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF PHOSPHATE ESTER FLUIDS
16/30339201 DC : 0 BS EN 1601 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
11/30251420 DC : 0 BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
DIN EN 16761-2 E : 2016 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
BS EN 16761-2:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique
BS EN 16934:2017 Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE
PREN 15488 : DRAFT 2006 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
UNI EN 15721 : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
DIN EN 15779 E : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>/= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
15/30325297 DC : 0 BS EN 16896 - PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER VISCOMETER
DIN EN 15751:2014-06 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
DIN EN 14214 E : 2003 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 15199-4:2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
BS 2000-489(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF)
11/30242687 DC : DRAFT APR 2011 BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD
IP PM ED : 2009 DETERMINATION OF LEAD, NICKEL, CHROMIUM, COPPER, ZINC, ARSENIC, CADMIUM, THALLIUM, ANTIMONY, COBALT, MANGANESE AND VANADIUM IN DISTILLATE TYPE BURNER FUELS DERIVED FROM WASTE MINERAL OILS - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY METHOD
06/30147345 DC : DRAFT MAR 2006 EN 15484 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
BS EN 15794:2009 Determination of explosion points of flammable liquids
16/30346963 DC : 0 BS EN 17057 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID
09/30185734 DC : 0 BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT
12/30266121 DC : 0 BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
14/30304809 DC : 0 BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
BS EN 16144:2012 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
BS 2000-4(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH
UNE-EN 16807:2017 Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants
BS 2000-563(2011) : 2011 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
BS 2000-605(2013) : 2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
BS 2000-571(2013) : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
01/124546 DC : DRAFT JAN 2002 PREN 237 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY
10/30216579 DC : 0 BS EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
BS EN 15492:2012 Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
BS EN 14865-1 : 2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
PREN 590 : DRAFT 2011 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
14/30310326 DC : 0 BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
BS EN 14832:2005 Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
DIN EN 16144:2012-05 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
BS 2000-553(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
IP 498 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
I.S. EN 16761-2:2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
I.S. CWA 15145:2005 AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS
UNE-EN 16734:2017 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
I.S. EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI CEN/TR 15367-3 : 2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
I.S. EN 16997:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
BS 2000-79(2009) : 2009 COR 2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS 2000-428(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-428: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY
EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
BS 2000-556(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHODOUR EN GRAPHITE
BS 2000-576(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
I.S. EN 15940:2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
DIN EN 16709 E : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
UNE-EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
PREN 14078 : DRAFT 2013 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
DIN EN 12916:2016-06 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
NF EN 15938 : 2011 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
UNI EN 16143 : 2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
PREN 17178 : DRAFT 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE
DIN EN 16900:2015-09 (Draft) FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
UNI EN 14214 : 2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 15490:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
S.R. CR 13837:2000 AUTOMOTIVE DIESEL FUELS - DETERMINATION OF FILTRABILITY - SFPP METHOD
I.S. EN 15489:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
I.S. EN 12766-1:2000 PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
I.S. EN 14538:2006 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
S.R. CR 13838:2000 AUTOMOTIVE DIESEL FUELS - DETERMINATION OF FILTRABILITY - AGELFI METHOD
I.S. EN 15492:2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
DIN EN 15488 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
DIN EN 15485 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
DIN EN 15486 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
DIN EN 15487 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
DIN EN 15553 E : 2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
DIN EN 15489 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
DIN EN 15484 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
DIN EN 14833 E : 2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
DIN EN 14522 E : 2005 DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS
DIN EN 15195 E : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
UNE-EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
UNE-EN 16640:2017 Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method
CEN/TR 15367-1:2014 PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS
BS EN 241:2000 Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method
BS EN ISO 6245:2002 Methods of test for petroleum and its products. BS 2000-4: Determination of ash
BS EN ISO 8754:2003 Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry
UNE-EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
UNE-EN 15944:2011 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
DIN EN 228:2017-08 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
EN 14214:2012+A1:2014/AC:2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
EN ISO 20783-2:2003 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003)
EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003)
EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
EN 16576 : 2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
UNI EN 15938 : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
UNI EN 15195 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
UNI EN 14078 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
UNI EN 14865-2 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
UNI EN 14275 : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
UNI EN 15944 : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
UNI EN 12662 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
EN 16934:2017 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
DIN EN 16896:2015-09 (Draft) PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
UNE-EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
DIN EN 16091:2012-02 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
DIN EN 16329:2013-07 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
06/30147354 DC : DRAFT MAR 2006 EN 15487 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
I.S. CEN TR 15367-3:2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
BS 2000-409(2007) : 2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C
BS 2000-612(2013) : 2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
BS 2000-394(2001) : 2001 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP)
DIN EN 15940 E : 2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
15/30330667 DC : 0 BS EN 16934 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTER (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
DIN EN 16143:2013-05 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
DIN EN 13016-1:2007-11 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT
UNI EN 16476 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
14/30297823 DC : 0 BS EN 15199-4 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
IP PM EC : 2009(R2016) DETERMINATION OF THE FATTY ACID METHYL ESTER CONTENT OF AVIATION TURBINE FUEL - SOLID PHASE EXTRACTION AND GAS CHROMATOGRAPHY METHOD
09/30207063 DC : 0 BS EN 14105 - FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENT (REFERENCE METHOD)
PD CEN/TR 15367-1:2014 Petroleum products. Guidelines for good housekeeping Automotive diesel fuels
I.S. EN 15195:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
14/30304453 DC : 0 BS EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
I.S. EN 13016-2:2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C
UNI EN 15837 : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
DIN EN 16934 E : 2017 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
CR 13837:2000 Automotive diesel fuels - Determination of filtrability - SFPP method
04/30113923 DC : DRAFT MAY 2004 EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
CEN/TR 16557:2013 Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination
PREN 228 : DRAFT 2009 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
BS EN 16896:2016 Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
I.S. EN 15779:2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-539(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
BS 2000-156(2005) : 2005 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 156: DETERMINATION OF HYDROCARBON TYPES IN PETROLEUM PRODUCTS - FLUORESCENT INDICATOR ADSORPTION METHOD
UNI EN 14865-1 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
IP PM ET : 2016 CRUDE OIL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
BS EN 15779 : 2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-620(2014) : 2014 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
BS 2000-464(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD
DIN EN 16476:2014-07 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
PREN 14538 : DRAFT 2002 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA AND MG CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
PREN 14214 : DRAFT 2009 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
CR 13839:2000 Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method
09/30200031 DC : 0 BS EN 15938 - AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
06/30148611 DC : DRAFT MAR 2006 EN 15485 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULPHUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
08/30176860 DC : DRAFT APR 2008 BS EN 15794 - DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
BS EN 16785-1:2015 Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis
PREN 116 : DRAFT 2009 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT
BS EN 16568:2014 Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
07/30164228 DC : 0 BS EN 15691 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
DIN EN 16785-1 E : 2016 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
UNE-EN 16785-1:2016 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
15/30326182 DC : 0 BS EN 16906 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS EN 16807:2016 Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants
15/30326869 DC : 0 BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
UNE-EN 16091:2012 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
EI HM 68 : 2011 PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS
07/30166903 DC : DRAFT AUG 2007 BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES
03/314578 DC : DRAFT OCT 2003 EN 14833 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF PHOSPHATE ESTER FLUIDS
02/123664 DC : DRAFT SEP 2002 BS EN 14538 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA AND MG CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
UNI CEN/TS 16640 : 2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
NF EN 15837 : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
IP 399 : 2016 DETERMINATION OF HYDROGEN SULPHIDE IN FUEL OILS
BS 2000-408(2014) : 2014 COR 2014 LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID)
UNE-EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
DIN EN 15837 E : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
UNE-EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
UNE-EN 15376:2015 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
BS 2000-123(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
DIN EN 16568:2015-03 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
IP PM ES : 2016 DETERMINATION OF COLD FILTER BLOCKING TENDENCY
UNI EN 15199-3 : 2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
BS 2000-498(2007) : 2007 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
I.S. EN 16576:2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
I.S. EN 13016-1:2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
I.S. EN 17057:2018 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods
I.S. EN 16807:2016 LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS
S.R. CEN/TR 16514:2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
BS 2000-538(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
PREN 1601 : DRAFT 2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
I.S. CEN/TR 14489:2005 FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
I.S. EN 15938:2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
I.S. EN 16329:2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
BS 2000-394(2007) : 2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
BS EN 13016-1:2007 Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
17/30361216 DC : 0 BS EN 14110 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
CEN/TR 15367-2:2007 Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels
16/30336428 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
PREN 15293 : DRAFT 2016 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
UNE-EN 14214:2013 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
BS 2000-409(2001) : 2001 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C
I.S. CEN TR 15522-2:2006 OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS
I.S. EN 15944:2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
S.R. CR 13839:2000 PETROLEUM PRODUCTS - DETERMINATION OF AROMATICITY - [13]C NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROMETRIC METHOD
S.R. CR 13840:2000 PETROLEUM PRODUCTS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS - ULTRAVIOLET (UV) SPECTROMETRIC METHOD
I.S. EN 15794:2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
DIN EN ISO 20764 E : 2004 PETROLEUM AND RELATED PRODUCTS - PREPARATION OF A TEST PORTION OF HIGH-BOILING LIQUIDS FOR THE DETERMINATION OF WATER CONTENT - NITROGEN PURGE METHOD
DIN EN 14538 E : 2006 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
BS EN 15553:2007 Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
BS EN 14213:2003 Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods
BS EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
BS EN 15484:2007 Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method
BS EN ISO 20764:2003 Methods of test for petroleum and its products Petroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method
BS EN ISO 4263-2:2003 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for category HFC hydraulic fluids
BS EN 15488:2007 Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method
BS EN 14833:2005 Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
BS EN 15195:2014 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
BS EN 15486:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
ISO 6245:2001 Petroleum products — Determination of ash
ISO 8754:2003 Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry
BS EN 15489:2007 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method
BS EN 13016-2:2007 Liquid petroleum products. Vapour pressure Determination of absolute vapour pressure (AVP) between 40°C and 100°C
ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
UNE-EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
BS EN ISO 20823:2003 Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
BS EN 14112:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test)
DIN EN 12952-15:2004-01 Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003
ISO 20823:2003 Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test
UNE-EN 15938:2011 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
BS EN 14275:2013 Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers
ISO 14597:1997 Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry
DIN EN 15553:2007-07 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
BS EN 14105:2011 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents
BS EN 15199-1:2006 Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils
UNE-EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
UNE-EN 14275:2013 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
DIN EN 15195:2015-02 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
CEN/TR 14489:2005 Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment
EN 16294:2012 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
EN 15489:2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
EN 14865-1:2009+A1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
EN 1601:2017 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
EN ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
EN 14213:2003/AC:2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
EN 16785-1:2015 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
EN 15488:2007 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
EN 13723:2002 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
EN 15779:2009+A1:2013 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
EN 15490:2007 Ethanol as a blending component for petrol - Determination of pHe
EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
EN 14517:2004 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method
EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
EN 14538:2006 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
EN 15487:2007 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
EN 16568:2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
EN 15484:2007 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
EN 16761-1:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
EN 14331:2004 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method
EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
EN 241:2000 Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method
EN 15938:2010 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
EN 15691:2009 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
EN 14275:2013 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN 16807:2016 Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants
EN 16143:2013 Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
EN ISO 14597:1999 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997)
EN 16091:2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
EN 15944:2010 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
EN 14077:2003 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
EN 15837:2009 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
EN 15485:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
EN ISO 1523:2002 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
EN 16715 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
EN ISO 20764:2003 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003)
EN 16761-2 : 2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
EN 16135:2011 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
EN 15794:2009 Determination of explosion points of flammable liquids
EN ISO 6245:2002 Petroleum products - Determination of ash (ISO 6245:2001)
EN ISO 4263-2:2003 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
EN 16476:2014 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
EN 16906:2017 Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
EN 14833:2005 Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
DIN EN 16270:2015-08 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
09/30206695 DC : 0 BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 15692 E : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
PD CEN/TR 15367-2:2007 Petroleum products. Guide for good housekeeping Automotive petrol fuels
DIN EN 15376 E : 2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 16640 E : 2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
PREN 14110 : DRAFT 2017 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
BS 2000-507(2006) : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
DIN EN 14865-1:2011-01 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010)
DIN EN 16135:2012-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
14/30300902 DC : 0 BS EN 16761-1 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
BS EN 16294:2012 Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES)
PREN 12916 : DRAFT 2014 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
BS EN 16476:2014 Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
DIN EN 16785-1:2016-03 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
UNE-EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
IP PM EH : 2013 DETERMINATION OF THE SOLVENT YELLOW 124 CONTENT OF KEROSINE AND GAS OIL - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD
I.S. EN 16568:2014 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
08/30172824 DC : DRAFT JAN 2008 BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
PREN 14112 : DRAFT 2014 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
PREN 16136 : DRAFT 2013 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
DIN EN 16896 E : 2017 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
BS 2000-510(2004) : 2004 PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD
I.S. EN 1601:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
IP 615 : 2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
PD CEN/TR 15522-1:2006 Oil spill identification. Waterborne petroleum and petroleum products Sampling
DIN EN 16476 E : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
14/30312370 DC : 0 BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS
DIN EN 16761-2:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
UNE-EN 16715:2016 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
DIN EN 15938 E : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
DIN EN 15794 E : 2010 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
11/30249539 DC : 0 BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
PD CEN/TS 16640:2014 Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method
DIN EN 15837:2010-04 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
07/30164620 DC : 0 BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
DIN EN 15944 E : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
DIN EN 15376:2014-12 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
UNI CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 15199-3:2008-09 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
NF EN 15944 : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
IP 41 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD
BS 2000-129(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 129: DETERMINATION OF BROMINE NUMBER - COLOUR INDICATOR TITRATION METHOD
DIN EN 16576:2015-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
16/30327612 DC : 0 BS EN 13016-3 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD)
BS EN 16906:2017 Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method
15/30325842 DC : 0 BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
BS EN 16091:2011 Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method
DIN EN 16715:2015-10 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
UNI EN 16135 : 2012 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
06/30152427 DC : 0 BS EN 15199-3 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
UNI EN 16294 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
BS 2000-589(2011) : 2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS 2000-498(2014) : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
I.S. EN 16270:2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
BS EN 15692:2009 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
09/30201423 DC : 0 BS EN 15944 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
BS EN 15376:2014 Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
BS EN 15721:2013 Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
IP 433 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
BS EN 15691:2009 Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method
I.S. EN 16476:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
BS 2000-336(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-336: PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
DIN EN 16997 E : 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
DIN EN 15199-4:2015-12 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
DIN EN 16906 E : 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS 2000-578(2009) : 2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-554(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF
NF EN 14865-1 : 2009 + A1 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
I.S. EN 15721:2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
S.R. CEN/TR 15367-1:2014 PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS
UNE-EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
I.S. EN 16135:2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
BS 2000-574(2009) : 2009 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
I.S. EN 16906:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
I.S. EN 16294:2012 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
I.S. EN 16761-1:2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
I.S. EN 590:2013+A1:2017&LC:2017 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
PREN 17155 : DRAFT 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER
DIN EN 16709:2015-12 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS EN 590 : 2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
17/30360226 DC : 0 BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER
UNE-EN 16709:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
DIN EN 16906:2015-09 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS 2000-572(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
DIN EN 16934:2015-12 (Draft) AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
EN 13016-3:2018 Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method)
IP 578 : 2015 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
UNE-EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
I.S. EN 14832:2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
I.S. EN 15751:2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
I.S. CWA 15293:2005 AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS
I.S. EN 15488:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
I.S. EN 14077:2004 PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD
I.S. EN 14331:2004 LIQUID PETROLEUM PRODUCTS - SEPARATION AND CHARACTERISATION OF FATTY ACID METHYL ESTERS (FAME) FROM MIDDLE DISTILLATES - LIQUID CHROMATOGRAPHY (LC)/GAS CHROMATOGRAPHY (GC) METHOD
DIN EN 14213 E : 2003 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
DIN EN 14331 E : 2004 LIQUID PETROLEUM PRODUCTS - SEPARATION AND CHARACTERISATION OF FATTY ACID METHYL ESTERS (FAME) FROM MIDDLE DISTILLATE FUELS - LIQUID CHROMATOGRAPHY (LC)/GAS CHROMATOGRAPHY (GC) METHOD
DIN EN 14078:2014-09 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS EN ISO 1523:2002 Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
ISO 20764:2003 Petroleum and related products Preparation of a test portion of high-boiling liquids for the determination of water content Nitrogen purge method
BS EN 237:2004 Methods of test for petroleum and its products BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
UNE-EN 590:2014 Automotive fuels - Diesel - Requirements and test methods
UNE-EN 14112:2017 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
BS EN 14331:2004 Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method
BS EN 116:2015 Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method
BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
BS EN 13132:2000 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
BS EN 1601:2017 Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
BS EN 12766-1:2000 Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
BS EN 13723:2002 Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
BS EN ISO 1516:2002 Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
CEN/TR 17103:2017 Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination
DIN EN 15491:2007-11 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
DIN EN 14331:2004-06 Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method
DIN EN 237:2004-12 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
EN 12952-15:2003 Water-tube boilers and auxiliary installations - Part 15: Acceptance tests
CEN/TS 15293:2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods
DIN EN 14077:2004-03 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003
DIN EN ISO 6245:2003-01 PETROLEUM PRODUCTS - DETERMINATION OF ASH
DIN EN 14214:2003-11 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN 14213:2003-11 HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS
EN 15553:2007 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
DIN EN 14517:2004-12 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-256: LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
DIN EN ISO 20764:2004-02 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003)
DIN EN 14833:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
DIN EN 15486:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
DIN EN 15487:2007-11 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
DIN EN 13723:2002-10 PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES BY WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF)
DIN EN 16896:2017-02 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
CEN/TR 16514 : 2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
CEN/TR 15522-1:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling
ONORM EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 14522:2005-12 Determination of the auto ignition temperature of gases and vapours
EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
DIN EN 15199-2:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
DIN EN ISO 20823:2003-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST
EN 13131:2000 Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method
EN 13132:2000 Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
DIN EN 14078:2004-03 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
DIN EN 14538:2006-09 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
UNE-EN 228:2013 Automotive fuels - Unleaded petrol - Requirements and test methods

ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
ISO 10715:1997 Natural gas — Sampling guidelines
ISO 3165:1976 Sampling of chemical products for industrial use — Safety in sampling
ISO 8943:2007 Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods
ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
ISO 3735:1999 Crude petroleum and fuel oils Determination of sediment Extraction method
IEC 60475:2011 Method of sampling insulating liquids
ISO 3734:1997 Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
ISO 4257:2001 Liquefied petroleum gases Method of sampling
ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
ISO 10336:1997 Crude petroleum Determination of water Potentiometric Karl Fischer titration method
ISO 10337:1997 Crude petroleum Determination of water Coulometric Karl Fischer titration method
ISO 9029:1990 Crude petroleum Determination of water Distillation method
ISO 9030:1990 Crude petroleum Determination of water and sediment Centrifuge method

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.