• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 3170:2004

Current

Current

The latest, up-to-date edition.

Petroleum liquids — Manual sampling

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French, Russian

Published date

19-01-2004

ISO 3170:2004 specifies the manual methods to be used for obtaining samples of liquid or semi-liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines.

ISO 3170:2004 applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 degrees Celsius.

The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).

Committee
ISO/TC 28/SC 2
DevelopmentNote
Supersedes ISO/DIS 3170 (01/2004) Supersedes IP PETROLEUM MEASUREMENT PT 6 SEC 1 (07/2004)
DocumentType
Standard
Pages
55
ProductNote
ISO 1998 THIS STANDARD ALSO REFERES
PublisherName
International Organization for Standardization
Status
Current
Supersedes

BS 2000-609(2012) : 2012 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
BS EN 16734 : 2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
DIN EN 16715 E : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
13/30275105 DC : 0 BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
17/30345962 DC : 0 BS EN ISO 20623 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF LUBRICANTS - FOUR-BALL METHOD (EUROPEAN CONDITIONS)
UNE-EN 15721:2014 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
14/30299493 DC : 0 BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
DIN EN 16136:2015-04 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS EN ISO 2592:2017 Petroleum and related products. Determination of flash and fire points. Cleveland open cup method
I.S. CEN TR 15367-3:2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
14/30294041 DC : 0 BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS
09/30206692 DC : 0 BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
BS EN 16997:2017 Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method
PD CEN/TR 16557:2013 Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination
10/30228224 DC : 0 BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
DIN EN 16900 E : 2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
S.R. CEN/TR 15367-2:2007 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 2: AUTOMOTIVE PETROL FUELS
BS EN 16329:2013 Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method
I.S. EN 14517:2004 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
14/30295249 DC : 0 BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
BIS IS 1448-39 : 2012 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 39: DETERMINATION OF VAPOUR PRESSURE - REID METHOD
I.S. EN 14078:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS EN 15837:2009 Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
04/30113349 DC : DRAFT MAY 2004 ISO 4263-3 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS
I.S. EN 12662:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
BS EN 16640:2017 Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method
BS EN 16715:2015 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
BS ISO 12922 : 99 AMD 13874 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
BS EN 16761-1:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique
BS 2000-579(2009) : 2009 COR 2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
09/30205523 DC : 0 BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
BS 2000-602(2013) : 2013 DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013)
BS ISO 4268:2000 Petroleum and liquid petroleum products. Temperature measurements. Manual methods
XP ISO/TS 11365 : 2011 XP PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR THE MAINTENANCE AND USE OF TRIARYL PHOSPHATE ESTER TURBINE-CONTROL FLUIDS
BS EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods
I.S. EN 116:2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
UNE-EN 16934:2018 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
BS 2000-465(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD
13/30274224 DC : 0 BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS EN 15938:2010 Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
DD ISO/TS 11365:2011 Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
03/300854 DC : DRAFT JAN 2003 ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
DIN EN 15691 E : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
UNE-EN 14865-1:2010 Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
DIN 55679 : 1985 PAINTS, VARNISHES AND RELATED PRODUCTS; DETERMINATION OF FLASHPOINT; RAPID EQUILIBRIUM METHOD
07/30172878 DC : 0 BS ISO 10307-1 - PETROLEUM PRODUCTS - TOTAL SEDIMENT IN RESIDUAL FUEL OILS - PART 1: DETERMINATION BY HOT FILTRATION
DIN EN 15794:2010-02 Determination of explosion points of flammable liquids
14/30294038 DC : 0 BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHY METHOD
DIN EN 15691:2009-07 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
DIN EN 15692:2009-08 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
11/30249539 DC : 0 BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
BS ISO 13579-1:2013 Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiency General methodology
NF EN ISO 13032 : 2012 PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
07/30159027 DC : 0 BS EN 14865-1 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE ORDINARY-SPEED VEHICLES WITH SPEEDS UP TO 200 KM/H AND HIGH-SPEED VEHICLES WITH SPEEDS UP TO 300 KM/H
15/30301955 DC : 0 BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD
BS 2000-606(2015) : 2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
BS EN 16143:2013 Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis
12/30258729 DC : 0 BS EN 15721 - ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
I.S. EN 14522:2005 DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS
09/30205353 DC : 0 BS EN ISO 20846 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD
08/30181966 DC : DRAFT MAY 2008 BS ISO 13739 - PETROLEUM PRODUCTS - PROCEDURES FOR THE TRANSFER OF BUNKER FUEL TO SHIPS
11/30244505 DC : 0 BS EN 16294 - PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICPOES)
03/300855 DC : DRAFT JAN 2003 ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
PD CEN/TR 14489:2005 Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment
03/108481 DC : DRAFT MAY 2003 ISO 11223 - PETROLEUM AND LIQUID PETROLEUM PRODUCTS - DIRECT STATIC MEASUREMENTS - MEASUREMENT OF CONTENT OF VERTICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING
I.S. EN ISO 3405:2011 PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
DD CEN/TS 15293:2011 Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
BS EN 15944:2010 Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES)
12/30264358 DC : 0 BS EN 1601 - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID)
IP 606 : 2016 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
DIN ISO 15380:2004-05 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HETG, HEPG, HEES AND HEPR
PD CEN/TR 17103:2017 Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination
DIN ISO 6617:2011-04 Petroleum-based lubricating oils - Aging characteristics - Determination of change in Conradson carbon residue after oxidation (ISO 6617:1994)
03/314396 DC : 0 ISO 20139 - RUBBER COMPOUNDING INGREDIENTS - PROCESS OILS - METHODS OF TEST AND CLASSIFICATION
BS ISO 6296:2000 Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method
08/30181649 DC : DRAFT JULY 2008 BS EN 15837 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC DIRECT METHOD
06/30147357 DC : DRAFT MAR 2006 EN 15488 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
ISO/TR 19686-1:2014 Petroleum products Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products
BS ISO 13357-2:2017 Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils
BIS IS 1448-16 : 2014 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 16: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD
PREN ISO 13736 : DRAFT 2011 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
S.R. CEN/TR 16557:2013 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
BS 2000-412(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS
IP 336 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 16785-1:2015 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
IP 309 : 2016 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
I.S. EN 16934:2017 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
S.R. CEN/TS 15940:2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 16143:2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
I.S. EN 61221:2004 PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS
S.R. CEN/TS 16640:2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
I.S. EN 15837:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
API MPM CH17.9 : 2012+ADD 1 : 2014 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF)
I.S. EN 12177:1998 LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF BENZENE CONTENT BY GAS CHROMATOGRAPHY
BS 2000-582(2016) : 2016 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD (ISO 3924:2016)
EI/JIG 1530 : 2013 QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS
UNE-EN 15779:2010 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
BS 2000-595(2011) : 2011 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
ISO/TR 13739:1998 Petroleum products Methods for specifying practical procedures for the transfer of bunker fuels to ships
ISO 15167:1999 Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method
DIN EN 16640:2015-09 (Draft) BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
UNI EN ISO 9038 : 2013 DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS
ISO 13357-2:2017 Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
BS EN 12916:2016 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection
BS 2000-138(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OXIDATION STABILITY OF AVIATION FUEL - POTENTIAL RESIDUE METHOD
DIN EN 16997:2016-05 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
IP 143 : 2015 DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS
ISO 9120:1997 Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method
BS 2000-509(2013) : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
17/30363912 DC : 0 BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE
BS 2000-123(2011) : 2011 PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE (ISO 3405:2011)
UNI EN ISO 3405 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
I.S. EN 16640:2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
BS 2000-388(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY OF MIDDLE-DISTILLATE FUELS
I.S. EN 16144:2012 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
EN 16734:2016 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
BS 2000-547(2006) : 2006 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
ASTM D 7500 : 2015 : REDLINE Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
BS 2000-574(2014) : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
I.S. EN 13016-3:2018 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD)
I.S. CEN TR 15522-1:2006 OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 1: SAMPLING
BS EN 16709 : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
I.S. EN 15484:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
UNI EN ISO 20846 : 2012 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD
ISO 5165:2017 Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method
I.S. EN ISO 20846:2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011)
I.S. EN ISO 20884:2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN ISO 6246:2017 PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017)
I.S. EN 228:2017 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
DIN EN ISO 20783-1:2011-04 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011)
DIN EN ISO 9038 E : 2013 DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013)
DIN EN 14275 E : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
DIN EN ISO 20847 E : 2004 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
DIN EN ISO 20823 E : 2003 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST
BS EN 14538:2006 Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
BS EN ISO 12937:2001 Methods of test for petroleum and its products. BS 2000-438. Petroleum products. Determination of content. Coulometric Karl Fischer titration method
BS EN ISO 9038:2013 Determination of sustained combustibility of liquids
BS EN 14517:2004 Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method
BS EN 15490:2007 Ethanol as a blending component for petrol. Determination of pHe
BS EN 12952-15:2003 Water-tube boilers and auxiliary installations Acceptance tests
BS EN 15487:2007 Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
BS EN ISO 5164:2014 Petroleum products. Determination of knock characteristics of motor fuels. Research method
BS EN ISO 20783-2:2003 Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFB
BS EN 15485:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method
BS EN 15199-2:2006 Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel
EN ISO 12922:2012 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
BS EN ISO 4404-2:2010 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Non-aqueous fluids
BS EN 15491:2007 Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method
BS EN ISO 4263-4:2006 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for industrial gear oils
BS EN ISO 12922:2012 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS EN 14077:2003 Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method
UNE-EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
BS EN 12662:2014 Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
ISO 5164:2014 Petroleum products Determination of knock characteristics of motor fuels Research method
BS EN ISO 6246:1998 Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method
BS EN 14078:2014 Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method
BS EN ISO 20783-1:2011 Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFAE
DIN EN 15490:2007-11 Ethanol as a blending component for petrol - Determination of pHe
EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
DIN EN 15938:2010-12 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
EN 12766-1:2000 Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
DIN EN 228:2004-03 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 15485:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
DIN EN 15488:2007-11 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
EN 12953-11:2003 Shell boilers - Part 11: Acceptance tests
DIN EN 15489:2007-11 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
DIN EN 15944:2011-02 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
DIN EN ISO 5164:2014-10 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014)
DIN EN 15199-1:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
CEN/TS 16640 : 2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
DIN ISO 6614:2002-04 PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS
DIN EN ISO 20847:2004-07 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
EN 12634:1998 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
DIN EN 1601:2017-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
EN ISO 20884:2011 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011)
DIN EN ISO 8754:2003-12 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
EN 16640:2017/AC:2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
DIN EN 15484:2007-11 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
EN 13016-2:2007 Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure(AVP) between 40 C and 100 C
EN 12662:2014 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
DIN EN 14832:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
ONORM EN 16329 : 2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
BS MA 100:1989 Specification for petroleum fuels for marine oil engines and boilers
ONORM EN 16568 : 2015 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
ONORM EN ISO 3679 : 2015 DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015)
I.S. EN 14865-2:2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
ONORM EN 15195 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
11/30232917 DC : 0 BS ISO 13579-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - METHOD OF MEASURING ENERGY BALANCE AND CALCULATING EFFICIENCY - PART 1: GENERAL METHODOLOGY
DIN EN 16294:2013-02 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
DIN ISO 9120:2005-08 Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method (ISO 9120:1997)
BS ISO 3987:2010 Petroleum products. Determination of sulfated ash in lubricating oils and additives
05/30098184 DC : DRAFT MAY 2005 ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
UNI EN ISO 13032 : 2012 PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
DIN EN 15940 E : 2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
02/122316 DC : DRAFT MAY 2002 ISO/DIS 20884 - PETROLEUM PRODUCTS - DETERMINATION OF LOW SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
PREN 12662 : DRAFT 2012 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
PD CEN/TR 16514:2013 Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
EI HM 49 : 2012 MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF)
BS 2000-606(2012) : 2012 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL - GAS CHROMATOGRAPHIC METHOD
BS 2000-57(1995) : 1995 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE SMOKE POINT OF KEROSINE
BS 2000-476(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-476: PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING
BS 2000-447(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
PREN 16135 : DRAFT 2010 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS)
ONORM EN ISO 3405 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
13/30277780 DC : 0 BS EN 16576 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DISTILLATE FUELS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS ISO 9038 : 2002 AMD 15159 TEST FOR SUSTAINED COMBUSTIBILITY OF LIQUIDS
BS 4385-1(1991) : AMD 8663 METHODS FOR DETERMINATION OF WATER IN CRUDE PETROLEUM, PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION
BS 2000-581(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
BS 2000-454(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD
BS 2000-552(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
08/30183846 DC : DRAFT AUG 2008 BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
12/30261072 DC : 0 BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS
DIN EN 16761-1:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
PD ISO/TR 19686-1:2014 Petroleum products. Equivalency of test method determining the same property Atmospheric distillation of petroleum products
08/30175752 DC : DRAFT JAN 2008 BS ISO 3987 - PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES
BS EN 16270:2015 Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method
I.S. EN 16734:2016 AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
06/30149512 DC : DRAFT APR 2006 EN ISO 14596 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
DEFSTAN 91-66/2(1995) : 1995 THE SEGREGATION, HANDLING AND QUALITY ASSURANCE OF PETROLEUM FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
DIN EN 15199-4 E : 2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
16/30336853 DC : 0 BS EN 16997 - LIQUID PETROLEUM PRODUCT - DETERMINATION OF SULFUR CONTENT IN ETHANOL CONTAINING PETROL E85 - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
15/30325297 DC : 0 BS EN 16896 - PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER VISCOMETER
12/30261556 DC : 0 BS ISO 5163 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD
11/30214536 DC : 0 BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
I.S. EN 16900:2017 FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
PREN 15487 : DRAFT 2006 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
BS ISO 28343:2010 Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC
DIN EN 15721:2013-12 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
BS EN ISO 16591:2010 Petroleum products. Determination of sulfur content. Oxidative microcoulometry method
BS ISO 20843 : 2003 AMD 15160 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC
08/30178054 DC : DRAFT FEB 2008 BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
06/30147369 DC : 0 EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - ION CHROMATOGRAPHIC METHOD
BS 2000-53(1999) : 1999 CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD
BS EN 61221:2004 Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
BS 2000-555(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
DIN EN 15751 E : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
EN ISO 9038:2013 Determination of sustained combustibility of liquids (ISO 9038:2013)
BS 2000-524(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
10/30205520 DC : 0 BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD
PREN 13016-3 : DRAFT 2016 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD)
PREN 15195 : DRAFT 2013 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
DIN EN 15492:2012-04 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
DIN EN 16568 E : 2015 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
DIN ISO 6614 E : 2002 PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS
PREN 15721 : DRAFT 2012 ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
DIN EN ISO 13032:2012-06 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
18/30358441 DC : DRAFT APR 2018 BS EN ISO 3016 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF POUR POINT
BS ISO 8697:1999 Crude petroleum and petroleum products. Transfer accountability. Assessment of on board quantity (OBQ) and quantity remaining on board (ROB)
BS ISO 9403:2000 Crude petroleum. Transfer accountability. Guidelines for cargo inspection
PREN 17057 : DRAFT 2016 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID
07/30156264 DC : 0 BS ISO 8820-1 - ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS
PREN ISO 5164 : DRAFT 2012 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO/DIS 5164:2012)
BS EN 15199-4:2015 Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil
BS 2000-170(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD
17/30352977 DC : 0 BS ISO 15029-2 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 2: SPRAY TEST - STABILIZED FLAME HEAT RELEASE METHOD
BS 2000-480(2006) : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
BS 2000-557(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
BS 2000-589(2015) : 2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
IP 14 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD
ISO 19378:2003 Lubricants, industrial oils and related products (class L) Machine-tool lubricants Categories and specifications
EI HM 52 : 2009 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT
I.S. EN 15199-3:2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
API MPM CH17.9 : 2012 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF)
PREN 15492 : DRAFT 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
02/120652 DC : DRAFT FEB 2002 ISO/DIS 20843 - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CLASSES HFA AND HFC
EN 238:1996/A1:2003 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY
DIN EN 15492 E : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
DIN EN 14832 E : 2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
PREN 16761-2 : DRAFT 2014 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
UNE-EN 16896:2017 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter
BS 2000-588(2011) : 2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
BIS IS 1448-122 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 122: PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD
I.S. EN 16709:2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
BS 2000-356(1999) : 1999 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD
BS 2000-456(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF POTASSIUM IN GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD
BS EN ISO 3924:2016 Petroleum products. Determination of boiling range distribution. Gas chromatography method
BS 2000-365(1996) : 1996 METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD
BS 2000-236(2014) : 2014 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014)
UNE-EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
DIN EN 15940:2016-09 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
IP 412 : 2012 PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS
BIS IS 1448-27 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 27: DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD
I.S. EN 16136:2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
I.S. EN 16091:2011 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
BS 2000-462(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD)
UNI EN 15691 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
ISO 6250:1997 Petroleum products Determination of the water reaction of aviation fuels
BS EN 16136:2015 Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
UNE-EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
ISO 3012:1999 Petroleum products Determination of thiol (mercaptan) sulfur in light and middle distillate fuels Potentiometric method
UNI EN 15492 : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD
EN 16709:2015/AC:2016 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
DIN EN 590:2017-10 Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017)
S.R. CWA 16379:2011 FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS
UNE-EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
BS 2000-143(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS
UNI EN 15779 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS 2000-34(2016) : 2016 DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016)
EN ISO 2592:2017 Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
API MPM CH17.11 : 2016 MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.11 - MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT - EL HYDROCARBON MANAGEMENT HM 52
BS 2000-143(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 143: DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS
UNI EN 15794 : 2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
UNI EN ISO 13736 : 2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
ISO 13579-1:2013 Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology
I.S. EN 14865-1:2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
I.S. EN 15692:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
I.S. EN 237:2004 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY
ISO 4262:1993 Petroleum products Determination of carbon residue Ramsbottom method
I.S. EN 12916:2016 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
I.S. EN 15491:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
UNI EN ISO 20884 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 15486:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
I.S. EN 15691:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
DIN EN ISO 12922:2013-04 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
DIN EN 1601:2016-06 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
DIN EN 12953-11:2003-12 SHELL BOILERS - PART 11: ACCEPTANCE TESTS
DIN EN 15491 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
DIN EN 15490 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
DIN EN 13016-2:2007-11 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C
DIN EN ISO 4263-1:2005-03 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003)
DIN EN 12662:2014-07 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
DIN EN 14105:2011-07 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
DIN EN ISO 9038:2013-12 Determination of sustained combustibility of liquids (ISO 9038:2013)
DIN EN ISO 20843:2011-04 Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011)
DIN EN ISO 8754 E : 2003 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
DIN EN 14275:2013-05 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
UNE-EN 1601:2018 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
DIN EN 14214:2014-06 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 4404-2:2011-03 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
BS EN ISO 9029:1997 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
ISO 8092-2:2005 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements
BS EN ISO 20847:2004 Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry
ISO 4263-2:2003 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids
UNE-EN ISO 20846:2012 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
BS EN ISO 14935:1999 Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
ISO 12185:1996 Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
UNE-EN ISO 20844:2016 Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015)
UNE-EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
I.S. EN ISO 14596:2007 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN ISO 9038:2013 DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013)
I.S. EN ISO 8754:2003 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 15199-2:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
I.S. EN ISO 5164:2014 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014)
I.S. EN ISO 13736:2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013)
I.S. EN 15199-1:2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS
DIN EN 12662:1998-10 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
EN 14112:2016 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
I.S. EN ISO 20843:2011 CATEGORIESAND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC
I.S. EN 14105:2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
UNI EN 14105 : 2011 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS
DIN ISO 15597:2006-01 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-503: DETERMINATION OF CHLORINE AND BROMINE CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN ISO 4404-2:2010 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS
I.S. EN 14275:2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
I.S. EN ISO 8092-2:2006 ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS
I.S. EN ISO 20783-1:2011 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS - PART 1: FLUIDS IN CATEGORY HFAE
EN 15199-1:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
EN 15199-3:2008 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
NF EN ISO 20884 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF SULPHUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN ISO 20844:2015 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE (ISO 20844:2015)
I.S. EN ISO 4263-3:2015 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING EHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015)
I.S. EN 14112:2016 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
I.S. EN ISO 2719:2016 DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016)
I.S. EN ISO 3679:2015 DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015)
EN 14105:2011 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
DIN EN 16640:2017-08 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
BS 3900-A8:1986 Methods of test for paints. Tests on liquid paints (excluding chemical tests) Test for flash/no flash (closed cup equilibrium method)
ONORM EN 16091 : 2012 LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
BS 3900-A13:1986 Methods of test for paints Test for flash/no flash (rapid equilibrium method)
BS 3900-A9:1986 Methods of test for paints Determination of flashpoint (closed cup equilibrium method)
BS 4726:1986 Methods for sampling raw materials for paints and varnishes
BS 2000-16(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE FREEZING POINT OF AVIATION FUELS
BS EN 16576:2014 Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method
BS 2000-239(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS)
DIN EN 15721 E : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
UNI EN 15751 : 2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS EN 15199-3:2008 Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil
08/30176795 DC : DRAFT APR 2008 BS EN 15779 - FATS AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES - DETERMINATION OF POLY-UNSATURATED FATTY ACID METHYL ESTERS BY GAS CHROMATOGRAPHY
EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
ISO 3405:2011 Petroleum products Determination of distillation characteristics at atmospheric pressure
BS ISO 10050:2005 Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
13/30280888 DC : 0 BS EN ISO 4263-3 - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS
I.S. EN ISO 3680:2004 DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
10/30216576 DC : 0 BS EN 16091 - LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD
PD CEN/TR 15367-3:2009 Petroleum products. Guide for good housekeeping Prevention of cross contamination
14/30300905 DC : 0 BS EN 16761-2 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
07/30169525 DC : 0 BS EN 15721 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
I.S. EN ISO 5163:2014 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014)
02/122315 DC : DRAFT MAY 2002 ISO/DIS 20847 - PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT OF AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
13/30282501 DC : 0 BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
BS 2000-309(2015) : 2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
09/30199323 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS
11/30197271 DC : DRAFT NOV 2011 BS EN ISO 9038 - DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS
ISO 9403:2000 Crude petroleum Transfer accountability Guidelines for cargo inspection
DIN EN 15779:2013-12 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser
BS 2000-156(2007) : 2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
I.S. EN 16896:2016 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
DIN ISO 5275 E : 2005 PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS - DETECTION OF THIOLS AND OTHER SULFUR SPECIES - DOCTOR TEST
BS 2000-433(1999) : 1999 PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE S-RAY FLUORESCENCE SPECTROMETRY (IDENTICAL WITH IP 433/1999)
BS 2000-600(2012) : 2012 PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD (ISO 13032:2012)
BS ISO 13739:2010 Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM
DIN ISO 3733:2003-02 PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD
08/30184585 DC : DRAFT JUNE 2008 BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD
UNI EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
11/30251420 DC : 0 BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
16/30339201 DC : 0 BS EN 1601 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
BS EN 16761-2:2015 Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique
BS EN 16934:2017 Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE
DIN EN 16761-2 E : 2016 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
PREN 15488 : DRAFT 2006 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
UNI EN 15721 : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
DIN EN 15779 E : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>/= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
02/121972 DC : DRAFT APR 2002 ISO/DIS 20844 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE
DIN EN 16576 E : 2015 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
ISO 6615:1993 Petroleum products Determination of carbon residue Conradson method
BS ISO 15169:2003 Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
DIN EN 15751:2014-06 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS ISO 17308:2015 Petroleum products and other liquids. Ethanol. Determination of electrical conductivity
I.S. EN 15199-4:2015 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
IP 615 : 2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
DIN 51453:2004-10 TESTING OF LUBRICANTS - DETERMINATION OF OXIDATION AND NITRATION OF USED MOTOR OILS - INFRARED SPECTROMETRIC METHOD
BS EN 16135:2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
BS 2000-489(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF)
BS 2000-523(2015) : 2015 DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
BS 2000-195(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS OF VOLATILE ORGANIC LIQUIDS
14/30298209 DC : 0 BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
15/30301302 DC : 0 BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
03/321614 DC : DRAFT DEC 2003 PREN 14865-2 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
11/30242687 DC : DRAFT APR 2011 BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD
BIS IS 1448-30 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD
17/30341515 DC : 0 BS ISO 12925-1 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY C (GEARS) - PART 1: SPECIFICATIONS FOR LUBRICANTS FOR ENCLOSED GEAR SYSTEMS
06/30147345 DC : DRAFT MAR 2006 EN 15484 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
BS EN 15794:2009 Determination of explosion points of flammable liquids
ISO 4268:2000 Petroleum and liquid petroleum products Temperature measurements Manual methods
16/30346963 DC : 0 BS EN 17057 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID
03/303313 DC : DRAFT APR 2003 EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
XP ISO/TS 11366 : 2011 XP PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES
02/121969 DC : DRAFT APR 2002 ISO/DIS 20623 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS)
09/30185734 DC : 0 BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT
18/30358429 DC : DRAFT APR 2018 BS EN ISO 3015 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF CLOUD POINT
12/30266121 DC : 0 BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
06/30149412 DC : 0 EN ISO 22854 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
14/30304809 DC : 0 BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
BS EN 16144:2012 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
BS 2000-4(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH
UNE-EN 16807:2017 Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants
BS 2000-439(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCT - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD
BS 2000-131(1998) : 1998 PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD
BS 2000-563(2011) : 2011 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
BS 2000-270(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LEAD CONTENT OF GASOLINE - IODINE MONOCHLORIDE METHOD
PD ISO/TS 17307:2016 Petroleum products. Biodiesel. Determination of total esters content by gas chromatography
17/30359115 DC : 0 BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
BS 2000-605(2013) : 2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
BS 2000-571(2013) : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
10/30216579 DC : 0 BS EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
BS EN 15492:2012 Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
BS EN 14865-1 : 2009 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
16/30323482 DC : 0 BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS
PREN 590 : DRAFT 2011 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
BIS IS 1448-9 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 9: DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD
14/30310326 DC : 0 BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
BS EN 14832:2005 Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives
DIN EN 16144:2012-05 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
UNE-EN 16761-1:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
BS 2000-553(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
IP 498 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
ISO 20623:2017 Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of lubricants — Four-ball method (European conditions)
UNE-EN ISO 12156-1:2016 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016)
I.S. EN 16761-2:2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
I.S. CWA 15145:2005 AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 3924:2016 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD
UNE-EN 16734:2017 Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods
I.S. EN 14214:2012 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 22854:2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE AND IN ETHANOL (E85) AUTOMOTIVE FUEL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD (ISO 22854:2016)
ISO/TS 17307:2016 Petroleum products — Biodiesel — Determination of total esters content by gas chromatography
UNI CEN/TR 15367-3 : 2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
I.S. EN 16997:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
ISO 13739:2010 Petroleum products Procedures for transfer of bunkers to vessels
EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
BS 2000-79(2009) : 2009 COR 2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS 2000-428(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-428: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY
BS 2000-13(1994) : 1994 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD
BS 2000-556(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHODOUR EN GRAPHITE
BS 2000-576(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
BS 2000-74(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD
I.S. EN ISO 16591:2010 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD
I.S. EN 15940:2016 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
EN ISO 20623:2018 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)
PD ISO/TS 15029-2:2012 Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilized flame heat release method
EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS 2000-447(2007) : 2007 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 16761-1:2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
DIN EN 16709 E : 2015 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
UNE-EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
I.S. EN 13016-1:2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
ISO 11365:2017 Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
PREN 14078 : DRAFT 2013 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
EN ISO 5165:2018 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017)
EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
DIN EN 12916:2016-06 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
S.R. CEN/TR 17103:2017 FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION
IP 454 : 2015 DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD
EI HM 1 : 1999 CALCULATION OF OIL QUANTITIES
UNI EN 16143 : 2013 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
PREN 17178 : DRAFT 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE
DIN EN 16900:2015-09 (Draft) FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
ONORM EN ISO 20884 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
ISO/TS 11365:2011 Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
EN ISO 3405:2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011)
EN 12177:1998/AC:2000 LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF BENZENE CONTENT BY GAS CHROMATOGRAPHY
EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
UNI EN 14214 : 2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 15490:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE
ISO 8691:1994 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
NF EN ISO 20846 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD
I.S. EN 15489:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
ISO 12925-1:2018 Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems
ISO 15597:2001 Petroleum and related products — Determination of chlorine and bromine content — Wavelength-dispersive X-ray fluorescence spectrometry
I.S. EN 14538:2006 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
I.S. EN 15492:2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
DIN EN ISO 20783-2:2004-05 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003)
DIN EN 15488 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
DIN EN 15485 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
DIN EN 15486 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD
DIN EN 15487 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
DIN EN 15553 E : 2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
DIN EN ISO 4263-4:2006-05 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006)
DIN EN 15489 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
DIN EN ISO 4263-3:2016-05 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015)
DIN EN ISO 4263-2:2003-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS; TOST TEST - PART 2: PROCEDURE FOR CLASS HFC HYDRAULIC FLUIDS
DIN EN 15484 E : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD
DIN EN 14833 E : 2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
DIN EN ISO 3679:2015-06 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
UNE-EN ISO 20783-1:2011 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011)
DIN EN 14522 E : 2005 DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS
DIN EN ISO 4404-2 E : 2011 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS
DIN EN 15195 E : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
DIN EN ISO 20884:2011-07 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
BS EN ISO 4263-3:2010 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Anhydrous procedure for synthetic hydraulic fluids
ISO 20783-2:2003 Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 2: Fluids in category HFB
ISO 4260:1987 Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method
ISO 4404-2:2010 Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids
ISO 15029-1:1999 Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 1: Spray flame persistence Hollow-cone nozzle method
BS EN ISO 3680:2004 Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
UNE-EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
BS EN 12634:1998 Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method
CEN/TR 15367-1:2014 PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS
UNE-EN 16640:2017 Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method. (Consolidated version)
BS EN ISO 5163:2014 Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method
BS EN ISO 6245:2002 Methods of test for petroleum and its products. BS 2000-4: Determination of ash
UNE-EN ISO 5163:2014 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014)
BS EN ISO 8754:2003 Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry
UNE-EN 116:2015 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
UNE-EN 15944:2011 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
UNE-EN ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017)
DIN EN 228:2017-08 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
ASTM D 8112 : 2017 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
UNI EN ISO 12922 : 2013 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
EN ISO 12156-1:2016 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016)
EN 14214:2012+A1:2014/AC:2014 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
ONORM EN 116 : 2015 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD
EN 16906:2017 Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
EN 14833:2005 Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
EN ISO 20783-2:2003 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003)
EN ISO 20823:2003 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003)
EN ISO 8754:2003 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003)
EN 16576 : 2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
EN ISO 5164:2014 Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014)
EN ISO 9029:1995 Crude petroleum - Determination of water - Distillation method (ISO 9029:1990)
EN ISO 14596:2007 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007)
UNI EN 15938 : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
UNI EN ISO 20843 : 2011 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC
UNI EN 15195 : 2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
UNI EN 14078 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
UNI EN ISO 4404-2 : 2011 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS
UNI EN ISO 5163 : 2014 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD
UNI EN 14865-2 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
UNI EN 14275 : 2013 AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS
UNI EN 15944 : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
UNI EN 12662 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS
EN 16934:2017 Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE
UNI EN ISO 20783-1 : 2011 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS - PART 1: FLUIDS IN CATEGORY HFAE
UNI EN ISO 5164 : 2014 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD
DIN EN 16896:2015-09 (Draft) PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
UNE-EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
DIN EN 16329:2013-07 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
06/30147354 DC : DRAFT MAR 2006 EN 15487 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
BIS IS 1448-69 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 69: DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
PD CEN/TR 15367-2:2007 Petroleum products. Guide for good housekeeping Automotive petrol fuels
DIN EN ISO 16591:2011-04 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
DIN EN 16091:2012-02 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
UNI ISO 4263 : 2001 PETROLEUM PRODUCTS - INHIBITED MINERAL OILS - DETERMINATION OF OXIDATION CHARACTERISTICS
BS 2000-409(2007) : 2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C
BS 2000-612(2013) : 2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
BS 2000-394(2001) : 2001 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP)
BS 2000-236(2005) : 2005 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD
15/30330667 DC : 0 BS EN 16934 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTER (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
ICAO 9977 : 2012 MANUAL ON CIVIL AVIATION JET FUEL SUPPLY
BS EN 15751:2014 Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method
IP 434 : 98(R2004) FREEZING POINT OF AVIATION TURBINE FUELS - AUTOMATED OPTICAL METHOD
DIN EN 16143:2013-05 PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS
DIN EN 13016-1:2007-11 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT
BS EN ISO 13032:2012 Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
UNI EN 16476 : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
12/30263877 DC : 0 BS EN ISO 22854 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
06/30138176 DC : 0 EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD
UNI EN ISO 16591 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD
BS ISO 6245 : 2001 AMD 15249 PETROLEUM PRODUCTS - DETERMINATION OF ASH
14/30297823 DC : 0 BS EN 15199-4 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL
BS ISO 8068:2006 Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
09/30207063 DC : 0 BS EN 14105 - FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENT (REFERENCE METHOD)
ISO 3013:1997 Petroleum products — Determination of the freezing point of aviation fuels
PD CEN/TR 15367-1:2014 Petroleum products. Guidelines for good housekeeping Automotive diesel fuels
I.S. EN 15195:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
14/30304453 DC : 0 BS EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
DIN ISO 8691:2010-09 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994)
I.S. EN 13016-2:2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C
UNI EN 15837 : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
DIN EN 16934 E : 2017 AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
DIN 55680:1983-08 PAINTS, VARNISHES AND RELATED PRODUCTS; FLASH/NO FLASH TEST; RAPID EQUILIBRIUM METHOD; ISO 3680 MODIFIED
04/30113378 DC : DRAFT MAY 2004 ISO 4263-4 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 4: PROCEDURE FOR INDUSTRIAL GEAR OILS
04/30113923 DC : DRAFT MAY 2004 EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
BS ISO 3007:1999 Methods of test for petroleum and its products. BS 2000-69. Petroleum products. Determination of vapour pressure. Reid method
BS 3195-2:1989 Methods for sampling petroleum products Automatic pipeline sampling of liquid hydrocarbons
CEN/TR 16557:2013 Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination
PREN 228 : DRAFT 2009 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
BIS IS 1448-135 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 135: CRUDE PETROLEUM - DETERMINATION OF WATER - DISTILLATION METHOD
BS EN 16896:2016 Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter
I.S. EN 15779:2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-539(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD
16/30325304 DC : 0 BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
01/206865 DC : DRAFT SEP 2001 IEC 61221 ED.2 - PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS
BS ISO 13357-1:2017 Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water
09/30205358 DC : 0 BS EN ISO 20884 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
UNI EN 14865-1 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE
12/30261559 DC : 0 BS ISO 5164 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD
BS 2000-160(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-160: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD
BS 2000-34(2002) : 2002 AMD 15248 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
BS EN 15779 : 2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-620(2014) : 2014 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
DIN EN 16476:2014-07 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
15/30316146 DC : 0 BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER
DIN ISO 13357-1:2009-04 PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER
PREN 14214 : DRAFT 2009 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS
DEFSTAN 91-91/8(2016) : 2016 TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR
09/30200031 DC : 0 BS EN 15938 - AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
ISO 11223:2004 Petroleum and liquid petroleum products Direct static measurements Measurement of content of vertical storage tanks by hydrostatic tank gauging
BS ISO 10307-1:2009 Petroleum products. Total sediment in residual fuel oils Determination by hot filtration
ISO 6249:1999 Petroleum products Determination of thermal oxidation stability of gas turbine fuels JFTOT method
PD ISO/TS 17306:2016 Petroleum products. Biodiesel. Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
BS EN 16785-1:2015 Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis
PREN 116 : DRAFT 2009 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT
BS EN 16568:2014 Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
16/30323964 DC : 0 BS EN ISO 5165 - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD
17/30359794 DC : 0 BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD
07/30164228 DC : 0 BS EN 15691 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD
DIN EN 16785-1 E : 2016 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
13/30285144 DC : 0 BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
UNE-EN 16785-1:2016 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
15/30326182 DC : 0 BS EN 16906 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS EN 16807:2016 Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants
15/30326869 DC : 0 BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
EI HM 68 : 2011 PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS
UNE-EN 16091:2012 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
BS ISO 15597:2001 Methods of test for petroleum and its products. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry
BS 2000-358(1997) : 1997 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - DISTILLATION METHOD
07/30166903 DC : DRAFT AUG 2007 BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES
09/30167033 DC : 0
BS 2000-237(2005) : 2005 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD
BS 2000-170(2013) : 2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013)
BS 2000-36(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
UNI CEN/TS 16640 : 2014 BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
ISO 28343:2010 Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC
DIN EN 15837 E : 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
UNE-EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
UNE-EN 15376:2015 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
BS 2000-69(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-69 - PETROLEUM PRODUCTS - DETERMINATION OF VAPOUR PRESSURE - REID METHOD
DIN ISO 1516:1987-06 PAINTS, VARNISHES, PETROLEUM AND RELATED PRODUCTS - FLASH/NO FLASH TEST - CLOSED CUP EQUILIBRIUM METHOD
BS 2000-123(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
DIN EN 16568:2015-03 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
BS 2000-413(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LOW LEVELS OF VANADIUM IN LIQUID FUELS - DETERMINATION BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY AFTER ASHING
API MPM CH8.2 : 2016 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS
UNI EN 15199-3 : 2008 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL
BS 2000-156(1997) : 1997 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
BS 2000-498(2007) : 2007 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
BS 2000-386(1999) : 1999 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD
I.S. EN 16576:2014 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
S.R. CEN TS 15293:2011 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 13032:2012 PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD (ISO 13032:2012)
I.S. EN ISO 20623:2018 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF LUBRICANTS - FOUR-BALL METHOD (EUROPEAN CONDITIONS) (ISO 20623:2017)
ISO 17308:2015 Petroleum products and other liquids — Ethanol — Determination of electrical conductivity
ISO 3924:2016 Petroleum products Determination of boiling range distribution Gas chromatography method
ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications
EN 590:2013 Automotive fuels - Diesel - Requirements and test methods
EN ISO 22854:2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE AND IN ETHANOL (E85) AUTOMOTIVE FUEL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD (ISO 22854:2016)
I.S. EN 16807:2016 LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS
I.S. EN 16715:2015 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION
I.S. EN ISO 2592:2017 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017)
S.R. CEN/TR 16514:2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
S.R. CWA 15940:2009 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
NF EN 238 : 1996 AMD 1 2005 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY
ISO/TS 15029-2:2012 Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method
BS 2000-538(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD
ONORM EN ISO 9038 : 2013 DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013)
PREN 1601 : DRAFT 2016 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
I.S. CEN/TR 14489:2005 FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT
I.S. EN 15938:2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
API MPM CH17.9 SPANISH : 2012 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF)
I.S. EN 16329:2013 DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD
BS EN 13016-1:2007 Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS 2000-408(2014) : 2014 COR 2014 LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID)
BS 2000-394(2007) : 2007 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE)
17/30361216 DC : 0 BS EN 14110 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
16/30336428 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
CEN/TR 15367-2:2007 Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels
BS EN ISO 3405:2011 Petroleum products. Determination of distillation characteristics at atmospheric pressure
PREN 15293 : DRAFT 2016 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
UNE-EN 14214:2013 Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
BS 2000-41(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD
ONORM EN ISO 13736 : 2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013)
BS 2000-409(2001) : 2001 LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C
I.S. EN ISO 12156-1:2016 DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016)
ISO 10050:2005 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
DIN EN ISO 6246:2016-04 (Draft) PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017)
ISO 12156-1:2016 Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method
ISO 13357-1:2017 Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water
ISO 11158:2009 Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG
ISO 10307-1:2009 Petroleum products Total sediment in residual fuel oils Part 1: Determination by hot filtration
DIN EN ISO 20846 E : 2012 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011)
DIN EN ISO 20884 E : 2011 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
I.S. EN 15376:2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
I.S. CEN TR 15522-2:2006 OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS
I.S. EN 15944:2010 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
I.S. EN 15794:2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
ONORM EN ISO 20846 : 2012 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011)
DIN EN ISO 14596:2007-12 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
DIN EN ISO 13736:2013-08 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
DIN EN ISO 20844 E : 2015 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE (ISO 20844:2015)
UNE-EN ISO 20843:2011 Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011)
DIN EN ISO 20764 E : 2004 PETROLEUM AND RELATED PRODUCTS - PREPARATION OF A TEST PORTION OF HIGH-BOILING LIQUIDS FOR THE DETERMINATION OF WATER CONTENT - NITROGEN PURGE METHOD
DIN EN 14538 E : 2006 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
ISO 20847:2004 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry
BS EN 15553:2007 Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method
UNE-EN ISO 12922:2013 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
BS EN ISO 12185:1996 Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
BS EN ISO 13736:2008 Determination of flash point. Abel closed-cup method
BS EN ISO 20844:2015 Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
BS EN ISO 3675:1998 Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method
ISO 22854:2016 Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel Multidimensional gas chromatography method
BS EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
BS EN ISO 12205:1996 Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels
BS EN 15484:2007 Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method
ISO 12937:2000 Petroleum products — Determination of water — Coulometric Karl Fischer titration method
ISO 9029:1990 Crude petroleum Determination of water Distillation method
BS EN ISO 20764:2003 Methods of test for petroleum and its products Petroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method
ISO 20884:2011 Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 20884:2011 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 4263-2:2003 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for category HFC hydraulic fluids
BS EN ISO 2719:2002 Determination of flash point. Pensky-Martens closed cup method
BS EN ISO 3679:2015 Determination of flash no-flash and flash point. Rapid equilibrium closed cup method
BS EN ISO 20763:2004 Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method
UNE-EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 14935:1998 Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:1998)
BS EN 15488:2007 Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method
BS EN ISO 20843:2011 Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
ISO 20783-1:2011 Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE
ISO 16591:2010 Petroleum products Determination of sulfur content Oxidative microcoulometry method
BS EN 14833:2005 Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
ISO 4263-1:2003 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils
BS EN 15195:2014 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
BS EN 15486:2007 Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method
BS EN ISO 3171:1999 Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
ISO 13032:2012 Petroleum products Determination of low concentration of sulfur in automotive fuels Energy-dispersive X-ray fluorescence spectrometric method
UNE-EN ISO 3405:2011 Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011)
ISO 5163:2014 Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
ISO 6245:2001 Petroleum products — Determination of ash
ISO 8754:2003 Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry
I.S. EN ISO 12922:2012 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
IEC 61221:2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
BS EN 15489:2007 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method
BS EN 13016-2:2007 Liquid petroleum products. Vapour pressure Determination of absolute vapour pressure (AVP) between 40°C and 100°C
ISO 4263-3:2015 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids
ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
UNE-EN ISO 5164:2014 Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014)
BS EN ISO 14597:1999 Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
ISO 14596:2007 Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry
ISO 14935:1998 Petroleum and related products Determination of wick flame persistence of fire-resistant fluids
ISO 20844:2015 Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
BS EN ISO 20846:2011 Petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method
DIN EN ISO 20844:2015-12 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE (ISO 20844:2015)
ISO 9038:2013 Determination of sustained combustibility of liquids
ISO 20843:2011 Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
UNE-EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method
BS EN ISO 4263-1:2004 Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for mineral oils
08/30187368 DC : DRAFT JULY 2008 BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS
ISO 3680:2004 Determination of flash/no flash Rapid equilibrium closed cup method
ISO 20763:2004 Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method
ISO 3830:1993 Petroleum products Determination of lead content of gasoline Iodine monochloride method
UNE-EN ISO 16591:2011 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
BS EN 14112:2003 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test)
BS EN ISO 15029-1:2000 Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray flame persistence. Hollow-cone nozzle method
BS EN ISO 20823:2003 Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test
BS EN ISO 3735:1999 Crude petroleum and fuel oils. Determination of sediment. Extraction method
08/30187364 DC : DRAFT JULY 2008 BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES
DIN EN 12952-15:2004-01 Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003
BS EN ISO 2160:1998 Petroleum products. Corrosiveness to copper. Copper strip test
ISO 13736:2013 Determination of flash point Abel closed-cup method
ISO 20823:2003 Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test
UNE-EN 15938:2011 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
BS EN 14275:2013 Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers
ISO 14597:1997 Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry
DIN EN 15553:2007-07 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
UNE-EN ISO 4404-2:2011 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
UNE-EN ISO 2719:2017 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
BS EN 14105:2011 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents
BS EN ISO 8092-2:2005 Road vehicles. Connections for on-board electrical wiring harnesses Definitions, test methods and general performance requirements
BS EN 15199-1:2006 Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils
UNE-EN 12916:2016 Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
ISO 12205:1995 Petroleum products — Determination of the oxidation stability of middle-distillate fuels
ISO 2719:2016 Determination of flash point — Pensky-Martens closed cup method
UNE-EN 14275:2013 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
DIN EN 15195:2015-02 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
CEN/TR 14489:2005 Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment
DIN ISO 5275:2005-10 Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003)
DIN EN ISO 20763:2004-10 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004)
EN 15488:2007 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
EN 16294:2012 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 16144:2012 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method
EN ISO 1516:2002 Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
EN 15489:2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
EN 14865-1:2009+A1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate
EN 1601:2017 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)
EN ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
EN 16997:2017 Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method
EN 16270:2015 Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method
EN 16785-1:2015 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
EN 13723:2002 Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
EN 15779:2009+A1:2013 Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
EN 15490:2007 Ethanol as a blending component for petrol - Determination of pHe
EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
EN ISO 15029-1:1999 Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999)
EN 14517:2004 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method
EN ISO 12205 : 1996 Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
EN ISO 20763:2004 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004)
EN 14832:2005 Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN 14538:2006 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 16329:2013 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
EN ISO 20844:2015 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE (ISO 20844:2015)
EN 15487:2007 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
EN 15376:2014 Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3171:1999 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
EN 15751:2014 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
EN 16568:2014 Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C
EN 237:2004 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
EN 15484:2007 Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
EN 16761-1:2015 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique
EN ISO 16591:2010 Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010)
EN ISO 3924:2016 Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016)
EN 15938:2010 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
EN ISO 8092-2:2005 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005)
EN 15691:2009 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
EN ISO 4404-2:2010 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
EN ISO 20783-1:2011 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011)
EN 14275:2013 Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers
EN 16136:2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
EN ISO 4263-4:2006 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006)
EN ISO 20847:2004 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004)
EN 16143:2013 Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis
EN 16807:2016 Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants
EN ISO 4263-1:2004 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003)
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
EN ISO 14597:1999 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997)
EN ISO 20846:2011 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011)
EN ISO 20843:2011 Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011)
EN 16091:2011 Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method
EN 15944:2010 Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES)
EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
EN ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017)
EN 14077:2003 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method
EI 1535 : 2016 MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL
EN ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
EN 15837:2009 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
EN 15485:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
EN ISO 1523:2002 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
EN ISO 20764:2003 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003)
EI 1581 : 2016 SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS
EN 16761-2 : 2015 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
EN 16135:2011 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
EN ISO 4263-3:2015 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015)
EN ISO 2160:1998 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
EN ISO 12937:2000 Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
EN ISO 6245:2002 Petroleum products - Determination of ash (ISO 6245:2001)
EN 15794:2009 Determination of explosion points of flammable liquids
EN ISO 5163:2014 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014)
EN ISO 4263-2:2003 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
EN 16900:2017 Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods
EN 16476:2014 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
DIN EN 16761-1 E : 2016 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
DIN EN 16270:2015-08 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
09/30206695 DC : 0 BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 15692 E : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
DIN EN 15376 E : 2014 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
DIN EN 16640 E : 2017 BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD
BS 2000-237(2014) : 2014 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014)
BS 2000-138(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 138: DETERMINATION OF OXIDATION STABILITY OF AVIATION FUEL POTENTIAL RESIDUE METHOD
BS 2000-243(1994) : 1994 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND HYDROCARBONS - DETERMINATION OF SULFUR CONTENT - WICKBOLD COMBUSTION METHOD
02/122677 DC : DRAFT JUN 2002 ISO/DIS 20763 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF ANTI-WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD
PREN 14110 : DRAFT 2017 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT
BS 2000-507(2006) : 2006 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS
12/30267087 DC : 0 BS EN 16476 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOLD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES)
DIN EN 14865-1:2011-01 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010)
DIN EN 16135:2012-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
15/30316149 DC : 0 BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL
14/30300902 DC : 0 BS EN 16761-1 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE
BS EN 16294:2012 Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES)
PREN 12916 : DRAFT 2014 PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION
BS EN 16476:2014 Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES)
14/30290117 DC : 0 BS EN ISO 20844 - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE - COMPLEMENTARY ELEMENT
ISO 10336:1997 Crude petroleum Determination of water Potentiometric Karl Fischer titration method
BS 2000-14(1994) : 1994 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD
09/30196077 DC : 0 BS ISO 3405 - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
DIN EN 16785-1:2016-03 BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS
ISO 15169:2003 Petroleum and liquid petroleum products Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
UNE-EN 16294:2013 Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES)
UNE-EN 15199-4:2015 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
BS ISO 11365:2017 Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
DIN EN 14214 E : 2003 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
08/30172824 DC : DRAFT JAN 2008 BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS 2000-170(1995) : 1995 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD
PREN 14112 : DRAFT 2014 FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST)
DIN EN 16896 E : 2017 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
BS 2000-510(2004) : 2004 PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD
BS EN ISO 22854:2016 Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method
I.S. EN 1601:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID)
BS 2000-429(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 429: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY
BS 2000-309(1998) : 1998 DIESEL AND DOMESTIC HEATING FUELS. DETERMINATION OF COLD FILTER PLUGGING POINT
PD CEN/TR 15522-1:2006 Oil spill identification. Waterborne petroleum and petroleum products Sampling
ISO 9114:1997 Crude petroleum Determination of water content by hydride reaction Field method
DIN EN 16476 E : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
UNE-EN ISO 22854:2016 Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016)
UNE-EN 16715:2016 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
DIN EN 15938 E : 2010 AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY
DIN EN 16761-2:2016-02 AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE
12/30268200 DC : 0 BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS ISO 15029-2:2018 Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilised flame heat release method
PD ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
DIN EN 15794 E : 2010 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
BS 2000-523(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
BS 2000-313(2001) : 2001 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF AIR RELEASE OF LUBRICATING AND HYDRAULIC OILS
BS ISO 11158:2009 Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
PD CEN/TS 16640:2014 Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method
10/30228221 DC : 0 BS EN 16135 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS)
17/30340314 DC : 0 BS EN ISO 3405 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
DIN EN 15837:2010-04 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
BS ISO/TR 13739:1998 Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships
DIN ISO 13357-2:2008-09 PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS
BS 2000-163(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LUBRICATING OILS AND ADDITIVES - DETERMINATION OF SULFATED ASH
07/30164620 DC : 0 BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
BS 2000-582(2010) : 2010 PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD
DIN EN 15944 E : 2011 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES)
16/30329930 DC : 0 BS EN ISO 6246 - PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD
DIN EN 15376:2014-12 AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS
UNI CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 15199-3:2008-09 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil
15/30310648 DC : 0 BS ISO 15380 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG, HEPG, HEES AND HEPR
NF ISO 28343 : 2010
IP 41 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD
I.S. EN 16568:2014 AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C
DIN EN 16576:2015-02 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
16/30327612 DC : 0 BS EN 13016-3 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD)
BS EN 16906:2017 Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method
15/30325842 DC : 0 BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS
BS EN 16091:2011 Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method
DIN EN 16715:2015-10 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
BS ISO 4261:2013 Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications
UNI EN 16135 : 2012 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
UNI EN 16294 : 2013 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
BS 2000-589(2011) : 2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD
BS 2000-498(2014) : 2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER
I.S. EN 16270:2015 AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD
BS EN 15692:2009 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
09/30201423 DC : 0 BS EN 15944 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
BS ISO 19378:2003 Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications
BIS IS 1448-8 : 2012 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 8: DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD
BS EN 15376:2014 Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods
BS ISO 15380:2016 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
BS EN 15721:2013 Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
IP 433 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
BS EN 15691:2009 Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method
I.S. EN 16476:2014 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES)
02/121971 DC : DRAFT APR 2002 ISO/DIS 20764 - PETROLEUM AND RELATED PRODUCTS - PREPARATION OF A TEST PORTION OF HIGH-BOILING LIQUIDS FOR THE DETERMINATION OF WATER CONTENT - NITROGEN PURGE METHOD
OLF 085 : 2012 RECOMMENDED GUIDELINES FOR SAMPLING AND ANALYSIS OF PRODUCED WATER
BS 2000-336(2003) : 2003 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-336: PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
DIN EN 16997 E : 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD
DIN EN 15199-4:2015-12 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil
DIN EN 16906 E : 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS 2000-143(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS
IP 383 : 1994(R2004) APPARENT VISCOSITY OF MOTOR OILS BETWEEN -30 DEGREE C AND -5 DEGREE C - COLD CRANKING SIMULATOR METHOD
BS 2000-578(2009) : 2009 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
BS 2000-554(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF
BS 2000-433(1998) : 1998 METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVE-LENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
UNE-EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
BS EN ISO 12156-1:2016 Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method
I.S. EN 15721:2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
S.R. CEN/TR 15367-1:2014 PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS
UNE-EN 16761-2:2016 Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique
I.S. EN 16135:2011 AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
BS 2000-373(2010) : 2010 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD
BS 2000-574(2009) : 2009 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
BS 2000-408(1997) : 1997 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUND AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID)
CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
I.S. EN 16906:2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS 2000-163(2010) : 2010 PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES
BS 2000-342(2000) : 2000 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF THIOL (MERCAPTAN) SULFUR IN LIGHT AND MIDDLE DISTILLATE FUELS - POTENTIOMETRIC METHOD
API MPM CH17.11 SPANISH : 2016 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT
I.S. EN 238:1996 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY
BIS IS 1448-21 : 2012 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 21: DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
I.S. EN 16294:2012 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES)
EI/JIG 1530 : 2019 Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4)
IP PM CW : 2004 DETERMINATION OF LOW LEVEL METALLIC ELEMENTS IN VACUUM GAS OIL/WAXY DISTILLATES AND CRUDE OILS - FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (AAS) OR INDUCTIVELY COUPLED PLASMA-EMISSION SPECTROPHOTOMETRY (ICP-ES) METHOD
I.S. EN 590:2013+A1:2017&LC:2017 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
NF ISO 10336 : 1998 CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD
ISO 15029-2:2018 Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method
PREN 17155 : DRAFT 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER
ISO/TR 9038:1991 Paints and varnishes Determination of the ability of liquid paints to sustain combustion
DIN EN 16709:2015-12 AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS
NF EN ISO 3405 : 2011 PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
17/30360226 DC : 0 BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER
BS EN 590 : 2013 AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS
IP 227 : 1999 DETERMINATION OF CORROSIVENESS TO SILVER OF AVIATION TURBINE FUELS - SILVER STRIP METHOD
DIN EN 16906:2015-09 (Draft) LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD
BS 2000-572(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
DIN EN 16934:2015-12 (Draft) AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE
EN 13016-3:2018 Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method)
IP 578 : 2015 PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY
UNE-EN 15940:2016 Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods
ISO 15380:2016 Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
I.S. EN 14832:2005 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
ISO 8068:2006 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
UNE-EN 16709:2016 Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
I.S. EN ISO 5165:1998 PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017)
ISO/TS 17306:2016 Petroleum products — Biodiesel — Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography
I.S. EN 15751:2014 AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD
DIN EN ISO 3405:2011-04 PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE
ISO/TS 11366:2011 Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines
I.S. CWA 15293:2005 AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS
ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
I.S. EN 15488:2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD
I.S. EN 15553:2007 PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD
ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
ISO 6246:2017 Petroleum products — Gum content of fuels — Jet evaporation method
DIN EN ISO 20843 E : 2011 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC
DIN EN ISO 20763 E : 2004 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF ANTI-WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD
DIN EN 14078:2014-09 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
BS EN ISO 1523:2002 Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
DIN EN ISO 20846:2012-01 PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011)
UNE-EN ISO 4263-3:2016 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015)
ISO 20764:2003 Petroleum and related products Preparation of a test portion of high-boiling liquids for the determination of water content Nitrogen purge method
BS EN 24260:1994 Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method
BS EN 237:2004 Methods of test for petroleum and its products BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
DD ISO/TS 11366:2011 Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines
UNE-EN 590:2014 Automotive fuels - Diesel - Requirements and test methods
UNE-EN 14112:2017 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
BS EN 14331:2004 Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method
BS EN 238:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
BS EN 116:2015 Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method
BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
BS EN 13132:2000 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching
BS EN 12953-11:2003 Shell boilers Acceptance tests
BS EN ISO 3830:1996 Petroleum products. Determination of lead content of gasoline. Iodine monochloride method
BS EN ISO 14596:2007 Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN 12177:2000 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography
BS EN 1601:2017 Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
BS EN 12766-1:2000 Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD)
BS EN 13723:2002 Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF)
BS EN ISO 1516:2002 Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method
ISO 4263-4:2006 Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oils
ISO 20846:2011 Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method
CEN/TS 15293:2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods
CEN/TR 17103:2017 Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination
DIN EN 15491:2007-11 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
DIN EN 237:2004-12 Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry
EN 12952-15:2003 Water-tube boilers and auxiliary installations - Part 15: Acceptance tests
DIN EN ISO 6245:2003-01 PETROLEUM PRODUCTS - DETERMINATION OF ASH
DIN EN 14214:2003-11 LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS
EN 15553:2007 Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method
DIN EN 14517:2004-12 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-256: LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD
DIN EN ISO 20764:2004-02 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003)
DIN EN 15486:2007-11 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
DIN EN 14833:2005-09 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS
DIN EN ISO 3680:2004-07 DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
DIN EN 15487:2007-11 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
DIN EN 16896:2017-02 PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER
CEN/TR 16514 : 2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
CEN/TR 15522-1:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling
CEN/TS 15940 : 2012 AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS
DIN EN 14522:2005-12 Determination of the auto ignition temperature of gases and vapours
DIN EN ISO 15029-1:2002-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 1: SPRAY FLAME PERSISTENCE - HOLLOW-CONE NOZZLE METHOD
EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
DIN EN 15199-2:2007-01 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels
DIN EN ISO 20823:2003-10 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST
DIN EN 14078:2004-03 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD
DIN EN 14538:2006-09 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)
EN 61221:2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
DIN EN ISO 5163:2014-10 PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014)
I.S. EN ISO 12185:1997 CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD
UNE-EN 228:2013 Automotive fuels - Unleaded petrol - Requirements and test methods

ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
ISO 10715:1997 Natural gas — Sampling guidelines
ISO 3165:1976 Sampling of chemical products for industrial use — Safety in sampling
ISO 8943:2007 Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods
ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
ISO 3735:1999 Crude petroleum and fuel oils Determination of sediment Extraction method
IEC 60475:2011 Method of sampling insulating liquids
ISO 3734:1997 Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
ISO 4257:2001 Liquefied petroleum gases Method of sampling
ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
ISO 10336:1997 Crude petroleum Determination of water Potentiometric Karl Fischer titration method
ISO 10337:1997 Crude petroleum Determination of water Coulometric Karl Fischer titration method
ISO 9029:1990 Crude petroleum Determination of water Distillation method

View more information
£178.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.