QQ-P-416 Revision F:1991
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416)
Available format(s)
PDF
Published date
01-10-1991
Publisher
Superseded date
28-03-2002
£13.91
Excluding VAT
Requirements for electrodeposited cadmium plating of various degrees of thickness.
| DevelopmentNote |
F Notice 1 - Notice of Cancellation/Superseded by SAE AMS QQ P 416. (05/2002)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
This specification covers the requirements for electrodeposited cadmium plating.
| Standards | Relationship |
| SAE AMS2400X | Similar to |
| SAE AMSQQP416E | Similar to |
| MIL-C-24938 Revision A:1993 | Coat, Firemen\'s, Structural, Aluminized Proximity (No S/S Document) |
| DOD-C-24529 Base Document:1976 | Charges, Battery, Lift Truck and Pallet Transporter Battery Service (Metric) (S/S by A-A-59814) |
| SAE AS8568A | Binoculars, Prismatic, Hand-Held (for Aeronautical Use) (7 × 50 and 6 × 42 (Wide Field)) |
| MIL-C-53052 Base Document:1985 | Connector, Electrical, Power |
| MIL-S-26547 Revision C:1985 | Starter-Generator Engine STU-6A |
| MIL-H-7195 Revision G:1991 | Hardware, Parachute, General Specification for (S/S by PIA-H-7195) |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| MIL-I-8580 Revision B:1965 | Indicator, Tachometer, Helicopter, 0-4000 RPM, Type MA-1 (No S/S Document) |
| MIL-S-23665 Revision B:1968 | SONOBUOY, DETECTION DEVICES, PRESERVATION, PACKAGING AND PACKING, PROCEDURES FOR (NO S/S DOCUMENT) |
| MIL-T-5842 Revision B:1985 | Transparent Areas On Aircraft Surfaces (Windshields And Canopies), Rain Removing And Washing Systems For, De-Frosting, De-Icing, Defogging, General Specification For |
| MIL-T-38034 Revision E:1970 | TIMER, FIRE CONTROL, BOMBING, DUAL (NO S/S DOCUMENT) |
| MIL-F-63428 Base Document:1981 | Feed Assembly, AMMO for Armament Subsystem, Helicopter, 20MM, M97E1 and M97E2 |
| MIL R 27426 : A | RING, RETAINING, SPIRAL (UNIFORM CROSS SECTION) |
| MIL C 27599 : B | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENTAL RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR |
| GG-G-91 Revision D:1972 | Gages, Tire Pressure, Self Contained and Inflator-Gage, Pneumatic Tire (S/Sby A-A-59568) |
| MIL-B-8914 Revision B:1966 | Bearing, Roller, Self-Aligning, Airframe, Antifriction (S/S by SAE-AS8914) |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| FF-R-556 Revision D:1981 | Rivet, Solid, Small; Rivet, Split, Small; Rivet, Tubular, Small Flat Washer (Burr); and Cap, Rivet, General Purpose |
| MIL C 83513 : C | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-R-10761 Revision A:1962 | ROTARY CONVERTERS (MOTOR GENERATORS) PU-134( )/U, PU-140( )/U, PU-141( )/U AND PU-143( )/U (NO S/S DOCUMENT) |
| MIL-T-13420 Revision A:1959 | TELEPHONE SET, TA-264/PT (NO S/S DOCUMENT) |
| MIL-I-7062 Revision C:1975 | Indicator, Position, Control Surfaces, 28 Volt DC, General Specification for |
| MIL-C-19853 Revision D:1994 | Carbon REmoving Compound (for use in Agitated Tank) (S/S by SAE-AMS-C-19853) |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| SAE AS7997 | Motors, Aircraft Hydraulic, Constant Displacement General Specification For |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL-T-83460 Base Document:1975 | TRANSDUCER, MOTIONAL PICKUP TRU-164/A (NO S/S DOCUMENT) |
| MIL C 12520/9 : A | CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 20, FEMALE INSERTS) |
| MIL I 7627 : F | INDICATOR, TURN AND SLIP 28V DC |
| MIL-I-83152 Revision B:1974 | Indicator, Indicated-Airspeed AVU-22/A (Indicator-Transducer) |
| MIL-C-81703 Base Document:1971 | Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting (S/S by SAE-AS81703) |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE (S/S BY SAE-AMS3277, SEE NOTICE 1 FOR ADDITIONAL INFORMATION) |
| MIL M 5794 : B | MICROPHONE, UNIT M 6A/UR AND MICROPHONE CARBON M 51/UR |
| MIL-R-10985 Revision A:1956 | REEL, AUTOMATIC TAKE UP, EXTENSION CABLE, 24-VOLT, D.C. (NO S/S DOCUMENT) |
| MIL-A-8243 Revision D:1985 | Anti-Icing and Deicing-Defrosting Fluids (S/S by SAE-AMS1424) |
| MIL D 83320 : 0 | DETECTOR, MAGNETIC AZIMUTH DSU-14/A |
| MIL C 38214 : B | COMPASS, MAGNETIC,MOUNTED |
| MIL-I-983 Revision E:1966 | Interior Communication Equipment, Naval Shipboard; Basic Design Requirements for (S/S by MIL-STD-2036) |
| MIL C 21097 : E | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL P 45952 : 0 | PIN,QUICK RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL-C-27298 Revision B:1980 | Clock, Aircraft, Mechanical ABU-9-A |
| MIL-T-38473 Revision A:1972 | Timer, Precision, Bombing, 0 - 30 Minutes (No S/S Document) |
| MIL C 21567 : A | COMPOUND, SILICONE, SOFT FILM |
| MIL A 18357 : 0 | ANTENNA AT-145B/A |
| MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| MIL-A-38140 Revision B:1977 | Altimeter, Pressure AAU-16/A (No S/S Document) |
| MIL C 27536 : B | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL F 0051068 : E | FILTER, PARTICULATE, HIGH-EFFICIENCY, FIRE RESISTANT |
| MIL H 81014 : A NOTICE 1 | HOOK, HELICOPTER, EXTERNAL CARGO, 20,000 POUND CAPACITY, TYPE C |
| MIL-STD-193 Revision L:1991 | Painting, Procedures and Marking for Vehicles, Construction Equipment, Material Handling Equipment, and Spare Parts |
| MIL-G-25597 Revision D:1973 | Gyroscope, Displacement, Roll and Pitch, Type MD-1 |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL-B-53102 Base Document:1990 | Berm Liner Assemblies, Arctic Service (No S/S Document) |
| MIL-B-8568 Revision B:1967 | Binocular, Prismatic, Hand-Held (for Aeronautical use) (7 X 50 and 6 X 42) Wide Field ( ) ASG (S/S by SAE-AS8568) |
| MIL C 28840 : A | CONNECTOR ELECTRICAL, CIRCULAR THREADED, HIGH DENSITY, HIGH SHOCK SHIPBOARD, CLASS D - GENERAL SPECIFICATION FOR |
| FF-B-584 Revision F:1989 | Bolts, Square Neck and Tee Head (S/Sby ASME-B18.5, ASME-B18.9,and ASME-B18.18.1M) |
| MIL-C-10750 Revision J:1988 | Coat, Firemen\'s (No S/S Document) |
| MIL-A-23595 Revision D:1995 | Amplifier, Audio Frequency |
| MIL-S-45933 Base Document:1971 | STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
| GGG-W-686 Revision C:1969 | WRENCH, TORQUE, UNIDIRECTIONAL (S/S BY GGG-W-2843 AND ASME-B107.14M) |
| MIL-C-7135 Revision F:1967 | Compressor, Pneumatic, 3,000 PSI -- 2 SCFM Aero 2A (*), Aero 2A-1 (*), Aero 2B (*), and Aero 2B-1 (*) |
| MIL-C-601 Revision G:1971 | Cylinder, Carbon Dioxide Filled, Technical (S/S by SAE-AS6011) |
| AA-O-00235 Base Document:1962 | OFFICE FURNITURE, STEEL, SECTIONAL (NO S/S DOCUMENT) |
| MIL-I-81186 Base Document:1966 | Indicator, Rate of Fuel Flow Synchro Type, M590360 |
| MIL-S-6715 Base Document:1950 | Spring, Helical, Aircraft |
| MIL-M-7255 Revision B:1969 | Manometer, Pressure, Differential and Absolute, Type E-1 (No S/S Document) |
| MIL B 5806 : F | BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE |
| MIL-I-21206 Revision B:1960 | Indicator, Rate of Flow, Fuel; EFU-7/A (300-5000-15000 PPH) (No S/S Document) |
| MIL-I-27709 Revision A:1962 | Indicator, Altitude, ARU-14/A, Remote (No S/S Document) |
| MIL-G-7818 Base Document:1951 | Gage, Fuel Quantity, Capacitor Type, Compensated, General Specification for |
| MIL P 83207 : B | PITOT STATIC TUBE, NOSE BOOM, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH-STRUCTURAL, 1,250 GPM, 4 X 2 OR 4 X 4 CHASSIS) (NO S/S DOCUMENT) |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| TT-R-2918 Revision A:2001 | Remover, Paint, No Hazardous Air Pollutants (HAPS) |
| MIL-A-55503 Base Document:1966 | Attitude Heading Reference Set AN/ASN-76 (No S/S Document) |
| MIL-C-8603 Revision B:1984 | Clamps, Loop Type, and Straps, Support |
| MIL T 8878 : D | TURNBUCKLE, POSITIVE SAFETYING |
| MIL-W-50258 Revision A:1971 | Warhead Section, 762mm Rocket, Practice: M38 Metal Parts for |
| MIL C 21617 : 0 | CONNECTOR, PLUG AND RECEPTACLE ELECTRICAL RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE |
| MIL R 007885 : C SUPP 1 | RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR |
| MIL-P-43116 Revision A:1964 | PIKE, WIRE AND PIKES, POLE (NO S/S DOCUMENT) |
| DOD N 70329 : 0 | NUT, PLAIN, ROUND, BALL AND ROLLER BEARINGS, METRIC, GENERAL SPECIFICATION FOR |
| MIL B 5423 : C | BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR |
| A-A-1037 Revision B:1990 | WIRE FABRIC, (INDUSTRIAL) (USE ANSI/AWCI-01-1992 FOR FUTURE PROCUREMENTS) |
| MIL-C-23367 Base Document:1963 | Computer, Flight Director, Aircraft |
| MIL I 45932 : 0 | INSERT, SCREW THREAD, THIN WALL, LOCK IN |
| SAE AS13572A | Springs, Helical, Compression and Extension |
| PREN 6068 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE |
| SAE AS39631A | Univeral Joint, Antifriction Bearings |
| ASTM F 844 : 2007 : REV A : R2013 | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| SAE AS 1501 : 1994 | HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT |
| ASTM F 1387 : 1999 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| AA-D-2757 Base Document:1990 | DOOR, VAULT, SECURITY (NO S/S DOCUMENT) |
| MIL-A-23121 Revision C:1970 | Aircrew Environmental, Escape and Survival Cockpit Capsule System General Specification for (No S/S Document) |
| MIL-P-5673 Revision D:1983 | PIN, STRAIGHT, HEADED (S/S BY NASM5673) |
| MIL-DTL-7885-16 Base Document:1996 | Rivets, Blind, Structural, Flanged Dome Head 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 4) (S/S by NAS9306) |
| MIL-N-45938 Revision A:1995 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH, GENERAL SPECIFICATION FOR (S/S BY NASM45938) |
| MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING (S/S BY NASM23460) |
| MIL-DTL-7885-12 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, (Type I, Style A, Class 2) (S/S by NAS9302) |
| MIL-U-3963 Revision A:1958 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MS21077 Revision H:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21077) |
| MIL-F-5591 Revision C:1986 | Fasteners; Panel; Nonstructural (S/S by NASM5591) |
| MIL-C-6985 Revision B:1966 | Clamp, Hose (S/S by NAS1925) |
| MIL-DTL-7885-14 Base Document:1996 | Rivets, Blind, Structural, Universal Protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, Oversize Diameter (Type I, Style B, Class 1) (S/S by NAS9304) |
| AA-C-2859 Base Document:1994 | Cabinet, Security, Weapons Storage |
| MIL-DTL-7885-11 Base Document:1996 | Rivets, Blind, Structural, Universal, Protruding Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle (Type I, Style A, Class 1) (S/S by NAS9301) |
| MIL-N-85353 Base Document:1981 | NUTS (FASTENERS) INTERNALLY THREADED, PRELOAD LOCKING 450 DEG F 800 DEG F,1200 DEG F, GENERAL SPECIFICATION FOR |
| MIL-DTL-7885-28 Base Document:1996 | Rivets, Blind, Structural, Flanged Dome Head, 5056 AL Alloy Sleeve, Mechanically Locked 8740 Alloy Steel Spindle, Oversize Diameter (Type I, Style B, Class 4) (S/S by NAS9306) |
| MIL-S-21472 Revision C:1988 | SCREW, SHOULDER, HEXAGON SOCKET-HEAD AND SLOTTED-HEAD GENERAL SPECIFICATION FOR (S/S BY NASM21472) |
| MIL-DTL-7885-15 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Head, 5056 AL Alloy Sleeve, Oversize Diameter (Type I, Style B, Class 2) (S/S by NAS9305) |
| MIL-S-45909 Revision C:1989 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (S/S BY NASM45909) |
| MIL-F-81177 Revision E:1984 | Fastener, Blind, High Strength, Installation Formed, Alloy Steel, General Specification for (S/S by NASM81177) |
| MIL-DTL-7885-20 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Shear Head, Nickel-Copper Alloy Sleeve (Alum Coat), Mechanically Locked Cres Spindle, (Type I, Style A, Class 3) (S/S by NAS9309) |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MS17987 Revision G:1994 | PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, RING HANDLE (S/S BY NASM17987) |
| MIL-P-10971 Revision E:1969 | Pin, Spring, Tubular (Coiled and Slotted) (S/S By NASM 10971) |
| MIL N 25027 : G | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| MIL-PRF-25134 Revision C:1996 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE (NO S/S DOCUMENT) |
| MIL-G-16491 Revision F:1989 | Grommet, Metallic, General Specification for (S/S By NASM16491) |
| MIL-F-22978 Revision A:1963 | Fastener, Rotary, Quick-Operating, High-Strength (ASG) (S/S by NASM22978) |
| MIL-A-81973 Base Document:1974 | Aircrew Automated Escape Systems, Test Vehicles for Ground Track Performance Testing, Rocket and/or Jet Engine Propelled, General Specification for (No S/S Document) |
| MIL-B-83050 Revision D:1985 | Bolt, Self-Retaining, Impedance Type (S/S by NASM83050) |
| MIL-S-7839 Revision B:1973 | SCREW, STRUCTURAL, AIRCRAFT (S/S BY NASM7839) |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-C-24066 Revision C:1992 | Clip, Component, Non-Electrical, General Specification for (S/S by NAS1463) |
| AA-F-363 Revision C:1990 | Filing Cabinet, Security, Maps and Plans, General Filing, and Storage |
| MIL-P-16610 Revision B:1975 | Pin, Tapered, Plain (S/S by NASM16610) |
| MIL-DTL-7885-27 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Shear Head, 5056 AL Alloy Steel Spindle, (Type I, Style A, Class 3) (S/S by NAS9303) |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE: 3,000, 10,000 AND 20,000 GALLON, PETROLEUM, LOW TEMPERATURE (NO S/S DOCUMENT) |
| MIL I 45910 : C | INSERT, SCREW THREAD LOCKED IN & RING LOCKED 1 SERRATED GENERAL SPECIFICATION FOR |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY (NO S/S DOCUMENT) |
| MIL-H-8775 Revision D:1976 | Hydraulic System Components, Aircraft and Missiles General Specification for (S/S by SAE-AS8775) |
| MIL-DTL-7885-13 Base Document:1996 | Rivets, Blind, Structural, 100 Degree Flush Shear Head, 5056 AL Alloy Sleeve, Mechanically Locked Cres Spindle, (Type I, Style A, Class 3) (S/S by NAS9303) |
| MIL-DTL-25027 Revision H:1997 | Nut, Self-Locking 250 Degree F, 450 Degree F, and 800 Degree F (S/S by NASM-25027) |
| MIL-F-8975 Revision B:1982 | Fasteners, Blind, High Strength, Installation Formed, Corrosion Resistant Steel, Heat Resistant Steel and Titanium, General Specification for (S/S by NASM8975) |
| MIL-N-45938-6 Revision C:1995 | NUT, SELF-LOCKING, CLINCH, (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 450 DEG. F, OR 800 DEG. F) (S/S BY NASM45938/6) |
| MIL-N-52110 Revision F:1982 | Nozzles, Fuel and Oil Servicing, Nonautomatic Shutoff and Nozzles, Fuel Servicing, Automatic Shutoff (S/S by A-A-52030) |
| MIL PRF 24308 : D | CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| AA-V-2737 Base Document:1990 | Modular Vault Systems |
| MIL-B-8831 Revision B:1982 | Bolt, 180 KSI FTU and 180 KSI FSU, 450 Degrees F Protruding and Flush Head, General Specification for (S/S by NASM8831) |
| MIL-T-83965 Revision B:1990 | TRUCK, FIRE-RESCUE, A/S32P-10 FORCIBLE ENTRY (NO S/S DOCUMENT) |
| MIL-P-21143 Revision B:1984 | Pin, Straight, Headless (Dowel) General Specification for (S/S by NASM21143) |
| MIL-B-7838 Revision C:1989 | Bolt, Internal Wrenching, 160 KSI FTU (S/S by NASM7838) |
| MIL-W-45595 Revision D:1985 | Washers, Shouldered, Recessed, Saddle, Concave and Convex (S/Sby NASM45595) |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F (S/S BY NASM8984) |
| MS20604 Revision K:1995 | RIVET, BLIND, NONSTRUCTURAL, UNIVERSAL HEAD, CLASS 1 (S/S BY NASM20604) |
| MS17984 Revision F:1994 | PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE (S/S BY NASM17984) |
| MIL-N-8985 Base Document:1972 | NUT, SELF LOCKING STEEL, 180 KSI FTU, 450 DEGREE F (S/S BY NASM8985) |
| MS21025 Revision F:1996 | NUT, CASTELLATED, HEXAGON (S/S BY NASM21025) |
| AA-S-1518 Revision A:1970 | SAFE, TOOL-RESISTANT, UNINSULATED, SECURITY (NO S/S DOCUMENT) |
| MIL-B-45908 Revision B:1985 | Bolt, Eye, General Specification for (S/S by NASM45908) |
| MIL-R-27384 Revision B:1970 | RIVET, BLIND, DRIVE TYPE (S/S BY NASM27384) |
| AA-D-600 Revision D:2000 | Door, Vault, Security |
| MIL-S-45915 Revision A:1967 | STUD, LOCKED IN - KEY LOCKED, GENERAL SPECIFICATION FOR (S/S BY NASM45915) |
| AA-V-2940 Base Document:2008 | Vault System, Armory, Assembled |
| MIL-B-8952 Revision B:1995 | Bearing, Roller, Rod End, Antifriction Self-Aligning (S/S by SAE-AS8952) |
| MIL-DTL-6162 Revision C:2000 | Generators and Starter-Generators, Electrical Direct Current, Nominal 30 Volts, Aircraft General Specification for |
| MIL-F-8961 Revision A:1992 | Fastener Element, Self-Locking, Externally Threaded, 450 Degrees Fahrenheit and 1,200 Degrees Fahrenheit |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| MIL-R-81876 Revision B:1988 | Receiver-Transmitter Radio Set AN/APX-100(V) (No S/S Document) |
| MIL-I-6447 Revision C:1974 | Indicator, True Airspeed, Type M-1A (No S/S Document) |
| DOD-I-63274 Revision A:1983 | Insert, Screw Thread-Thin Wall, Locked in, Metric, General Specification for |
| MIL F 18240 : E | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEG F MAXIMUM |
| MIL-L-7806 Revision A:1956 | Light, Panel, Plastic Plate, Lighting |
| MIL-A-28737 Revision A:1977 | Antenna, IFF, AS-1288( ),(3 Meters) (10 Feet), AS-2189 (1.8 Meters )(6 Feet() (No S/S Document) |
| MIL A 24775 : 0 | AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-M-8609 Revision B:1965 | Motor, DC, 28 Volt System, Aircraft, General Specification for |
| SAE AMSC19853 | Carbon Removing Compound (For Use in Agitated Tank) |
| MIL-S-8660 Revision C:1983 | SILICONE COMPOUND, NATO CODE NUMBER S-736 (S/S BY SAE-AS8660) |
| MIL-B-25084 Base Document:1955 | Beacon, Radio AN/APN-69 (No S/S Document) |
| MIL-C-81511 Revision F:1992 | Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting: and Accessories General Specification for (S/S by SAE-AS81511) |
| MIL B 45912 : A | BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL |
| MIL-S-43770 Base Document:1972 | SNAP HOOKS GENERAL SPECIFICATION FOR (S/S BY NASM43770) |
| MIL-S-24298 Revision A:1969 | Safety Belt and Harness, Submarine Personnel (No S/S Document) |
| MIL-H-62217 Revision A:1981 | Hose and Hose Assemblies, Non-Metallic, Silicone, Polyester and Wire Reinforced (for Coolant and Heating Systems of Diesel and Gasoline Powered Engines) (S/S by A-A-52426) |
| MIL R 23016 : A | RADIO SET AN/ARC-94 |
| SAE AS4444 | Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi |
| MIL L 60427 : B | LOCKWIRE, FOR 2.75 INCH ROCKET MOTOR ALL MARKS AND MODS |
| MIL-STD-2156 Base Document:1983 | Launcher, Rail, Guided Missile, Aircraft, General Design Criteria for |
| MIL-F-46579 Revision D:1976 | Fuze, Point Detonating, M505A3; Parts for |
| MIL-I-45934 Base Document:1971 | Insert, Screw Thread, Keyring Locked, Self Locking and Non Self Locking, 125, 180, and 220 KSI FTU: General Specification for (No S/S Document) |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK (NO S/S DOCUMENT) |
| MIL-C-85049 Revision A:1990 | Connector Accessories, Electrical General Specification for (S/S by SAE-AS85049) |
| MIL-P-21415 Revision C:1973 | PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE (NO S/S DOCUMENT) |
| MIL-F-45060 Revision D:1975 | Fuze, Mine, Combination M605, Parts for |
| MIL-A-19736 Revision A:1960 | Air Refueling Systems, General Specification for |
| MIL-C-40084 Revision C:1990 | Corrosion Preventive Compound, Water-Emulsifiable, Oil Type |
| MIL S 13623 : C | SWITCH, ROTARY, 28 VOLT DC |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES (S/S BY MIL-HDBK-1250) |
| MIL C 7958 : A | CONTROL, PUSH PULL, FLEXIBLE AND RIGID |
| MIL P 81716 : 0 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F) |
| FF-B-575 Revision C:1970 | Bolt, Hexagon and Square |
| MIL C 7907 : A | CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES] |
| MIL-C-1161 Revision E:1988 | Collar, Dog, Leather (No S/S Document) |
| MIL-D-83029 Revision A:1968 | Drive Assembly, Constant Speed, General Specification for (No S/S Document) |
| MIL H 81529 : 0 | HOOK, HELICOPTER EXTERNAL CARGO, 6,000 POUND CAPACITY TYPE A |
| MIL-I-85671 Base Document:1987 | Indicator, Frequency Channel ID-2121A/ARC, ID-2229A/ARC, and ID-2303/ARC (No S/S Document) |
| MIL R 11767 : F | RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT |
| MIL-G-23337 Base Document:1962 | Gages, Pressure, Dial Indicating |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| DOD-B-63545 Base Document:1982 | Bolts, Ribbed Shoulder, Wheel Mounting, Metric General Specification for (No S/S Document) |
| MIL F 45968 : A | FITTINGS, AUTOMOTIVE TUBE, BRASS INVERTED FLARE (WITH STEEL NUT) |
| MIL P 26517 : A | POWER SUPPLY, TRANSFORMER-RECTIFIER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-82594 Base Document:1971 | Corrosion Preventive Compound and Surface Sealer for Nonferrous Metals (No S/S Document) |
| MIL-F-50454 Revision A:1969 | Fuze, Grenade M219A1 and M219A2 Loading, Assembling and Packing (No S/S Document) |
| MIL-I-82437 Base Document:1966 | Igniter |
| MIL-B-51492 Revision A:1987 | Belt, Safety, Boat (No S/S Document) |
| MIL-T-19576 Revision A:1961 | TRANSMITTER, REMOTE COMPASS, THIN WING TYPE ML-1 (UNSTABILIZED) (NO S/S DOCUMENT) |
| MIL C 55302/38 : B | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, ELECTRICAL, POLARIZED SHELL, MALE, 0.100 INCH CONTACT SPACING, PIN TERMINAL |
| MIL-D-9063 Revision B:1965 | Desealant, Integral Fuel and Oil Tanks (S/S by MIL-R-81294) |
| MIL-F-8839 Revision A:1988 | Fittings, Lubrication, Drive Type (No S/S Document) |
| DOD-P-63477 Base Document:1981 | PIN, SPRING, TUBULAR, (COILED AND SLOTTED), GENERAL SPECIFICATION FOR, METRIC |
| MIL-T-13513 Revision B:1989 | Terminals, Lug; and Splices, Conductor (Electrical, Solderless, for Automotive Use) (Dual Dimensions) (S/S by A-A-52416) |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-I-5133 Revision C:1953 | Indicator, Attitude, Type J-8 (No S/S Document) |
| MIL-P-60009 Revision B:1990 | PROPELLANT CHARGE ASSEMBLY, ROCKET, HIGH EXPLOSIVE, 66 MM, M72A1, M72A2, OR M72A3, WITH COUPLER (NO S/S DOCUMENT) |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| MIL-C-5604 Revision B:1962 | Compass, Magnetic, Pilot\'s Standby (S/S by SAE-AS5604) |
| MIL-C-29145 Revision B:1984 | Coat, Fireman\'s, Aluminized, Proximity (S/S By MIL-C-24938) |
| MIL-H-87111 Revision A:1984 | HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL-F-60323 Revision A:1971 | Fuze, PD, M525, M526 and M527B1, Less Head Assembly, Metal Parts for (No S/S Document) |
| MIL-R-52255 Revision D:1988 | Repair Kit and Repair Kit Components, for Collapsible Fabric Tanks, Drums, and Boats |
| MIL-HDBK-1250 Revision A:1995 | Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies (S/S by AS12500) |
| MIL-B-13136 Revision B:1968 | Battery, Dry (No S/S Document) |
| MIL-A-21071 Revision B:1973 | Antifogging Compound, Transparent Aircraft Enclosures (No S/S Document) |
| MIL-C-43616 Revision C:1981 | Cleaning Compounds, Aircraft Surface (S/S by A-A-59921) |
| MIL-I-23870 Base Document:1963 | Indicator, Fuel Rate of Flow, 0 to 15 GPM (No S/S Document) |
| MIL-STD-1516 Revision B:1990 | Unified Code for Coating and Finishes for DOD Materiel (No S/S Document) |
| MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
| MIL U 18182 : E | UNION, PIPE, FORGED STEEL, THREADED, WATER OIL GAS (2,000, 3,000 AND 6,000 LB/IN2) |
| MIL-S-6150 Revision D:1987 | STARTER: ENGINE, ELECTRICAL, DIRECT CRANKING AIRCRAFT, 28 VOLTS DC (NO S/S DOCUMENT) |
| DOD-B-63475 Base Document:1981 | Bolt, Shoulder, Hexagon Head, General Specification for, METRIC (No S/S Document) |
| MIL-STD-2131 Revision A:1991 | Launcher, Ejection, Guided Missile, Aircraft, General Design Criteria for |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| DOD-P-70330 Base Document:1982 | PLUG, EXPANSION, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| MIL-P-8564 Revision D:1970 | Pneumatic System Components, Aeronautical, General Specification for |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| MIL-R-48233 Revision A:1980 | Rod, Stabilizing, Coated for 2.75 Inch Rocket Motor MK4/MK40and Mods |
| MIL-C-4150 Revision J:1989 | Cases, Transit and Storage, Waterproof and Water-Vaporproof (No S/S Document) |
| MIL I 38715 : B | INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS |
| MIL R 46963 : A | ROCKET MOTOR, M42A1, BOOSTER |
| MIL-A-62019 Revision B:1969 | Armored Reconnaissance/Airborne Assault Vehicle Full Tracked, 152MM, M551; Processing for Storage and Shipment of (See Notice 1 for Replacement Information) |
| MIL S 12109 : C | SOLENOID, ELECTRICAL, CLASS 2 (MACHINE GUN) |
| MIL C 4928 : A | CHARGER, BATTERY, SILICON DIODE, TYPE A-1 |
| MIL C 83723 : E | CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR |
| MIL-DTL-85110 Revision B:1997 | Bar, Repeatable Release Holdback (RRHB), Aircraft Launching, General Requirement for |
| SAE AS85731B | Fastener, Positive Locking, Electronic Equipment, General Specification For |
| ASTM B 766 : 1986 : R1998 | Standard Specification for Electrodeposited Coatings of Cadmium |
| MIL-DTL-5015 Revision H:2000 | Connectors, Electrical, Circular Threaded, AN Type, General Specification for (S/S by SAE-AS50151) |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-P-17802 Revision E:1987 | Padlocks and Padlock Sets, Low Security, Key Operated, Regular (Open) Shackle (S/S by A-A-1927) |
| MIL-V-5527 Revision A:1951 | VALVES, AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF |
| MIL-S-45005 Revision C:0198 | SEAL, PLAIN, AND SEAL, PLAIN, ENCASED, FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEALING MEMBER, SPRING-LOADED (S/S BY A-A-52524) |
| MIL-M-9397 Revision E:1979 | Frequency Converter, Mobile, Type MC-1A |
| MIL S 6807 : D | SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR |
| MIL-P-46416 Revision A:1964 | Projectile, 25 Millimeter, M379 for Trainer Mortar M32, Assembly(No S/S Document) |
| SAE AS8181A | Detector, Ice, Air Intake Duct, Aircraft Engines and Airframe Systems, General Specification For |
| MIL-C-6122 Base Document:1950 | Collimator; Sextant, Aircraft (No S/S Document) |
| MIL-I-5418 Revision B:1963 | Indicator, Airspeed, Pitot Static, Sensitive, 50-650 Knots |
| MIL-S-8812 Revision D:1975 | Steering System, Aircraft General Requirements for |
| FF-W-100 Revision C:1969 | Washer, Lock (Tooth) |
| MIL-S-8710 Revision B:1969 | Strainer, Airframe Fuel System, General Specification for |
| MIL-F-3541 Revision C:1989 | Fittings, Lubrication, General Specification for (S/S by SAE-AS35411) |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MIL A 24045 : 69 NOTICE 1 | ALIDADE, BINOCULAR MARINE |
| MIL-S-85510 Base Document:1981 | Seats, Helicopter Cabin, Crashworthy, General Specification for |
| MIL-S-7852 Revision B:1968 | Seat, Aircrew, Adjustable, Swivel, Type E-1 (No S/S Document) |
| MIL-B-26793 Revision B:1958 | Blower, Gasoline Engine Driven, Type A-1 (No S/S Document) |
| MIL-A-26107 Revision D:1960 | Air Conditioner, Trailer-Mounted, Freon Cycle, 11-1-2 Ton Refrigerating Capacity, Type MA-3 (No S/S Document) |
| MIL-A-6425 Revision B:1959 | Adapter, Pressure Fuel Servicing, Aircraft, General Specification for (S/S by MIL-A-25896) |
| MIL-A-38331 Base Document:1964 | Amplifier-Power Supply AM-4080/ASN-55, Leveling (No S/S Document) |
| MIL-C-81582 Revision B:1975 | Connector, Electrical, Bayonet Coupling, Environmental Resisting, Umbilical, General Specification for (S/S by SAE-AS81542) |
| DOD-P-63542 Base Document:1981 | PIN, GROOVED, HEADED-LONGITUDINAL GROOVE, METRIC, GENERAL SPECIFICATION FOR |
| MIL-W-70342 Base Document:1988 | Washer, Flat, Metric General Specification For |
| MIL-V-8610 Revision B:1984 | Valve, Fuel Shutoff Solenoid Operated, 28 Volt DC |
| FF-T-305 Revision C:1974 | Thumbscrew |
| MIL-M-70780 Base Document:1988 | Mine, Anti-Personnel: M86 Arming Assembly for |
| MIL-I-27273 Revision A:1965 | Inverter, Power, Static, General Specification for |
| MIL-G-8798 Base Document:1956 | Gage System, Fuel-Quality, Capacitor-Type, Nonvacuum Tube, Integrally Lighted, General Specification for (S/S by MIL-G-26988) |
| MIL-I-21203 Revision A:1962 | Indicator, Attitude, Spherical, Direct Reading, Fast Erecting, Electric Gyro |
| MIL-A-19940 Base Document:1957 | Amplifier, Control, Single Channel, S-2 Compass (No S/S Document) |
| MIL-G-22169 Base Document:1959 | Gyro, Vertical and Mount (No S/S Document) |
| MIL-C-18053 Revision A:1958 | Control Amplifier, Altitude (P-1 Automatic Pilot Radar Set, AN/APN-22) (No S/S Document) |
| MIL-F-85731 Base Document:1986 | Fastener, Positive Locking, Electronic Equipment General Specificationfor |
| MIL T 21014/1 : 0 | TUNGSTEN BASE PARTS, HIGH DENSITY METAL (SINTERED OR HOT PRESSED), COATED, ELECTRODEPOSITED CADMIUM |
| MIL-S-9487 Revision C:1985 | SWITCH, TRIGGER, SINGLE POLE, TWO STAGE, MOMENTARY (S/S BY MIL-S-8805/111) |
| MIL-R-19750 Revision A:1958 | REGULATOR; VOLTAGE, 28V, 120 DEG. C, FOR 30V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR (S/S BY MIL-R-23761) |
| DOD-N-70333 Base Document:1985 | Nut, Plain and Self-Locking, Clinch, Metric (Self-Clinching, Knurled Collar) Fixed and Floating, General Specification for (No S/S Document) |
| MIL-N-85615-8 Base Document:1989 | Nut, Self-Sealing, Self-Locking, Alloy Steel, 125 KSI FTU, 250 Deg. F and 450 Deg. F |
| MIL-P-48188 Revision A:1992 | Projectiles, 155mm, HE, M692 and M731 Metallic Hardware For |
| FF-P-386 Revision D:1971 | Pin, Cotter (Split)(S/S by ASME-B18.8.1) |
| FF-P-101 Revision F:1984 | Padlocks (S/S by A-A-1928, A-A-1930, A-A-1927, MIL-S-23769) |
| MIL-PRF-8516 Revision G:1997 | Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured |
| FF-N-845 Revision D:1981 | NUT, PLAIN, WING, INCH AND METRIC |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-V-5461 Revision C:1977 | VALVE, VACUUM BREAKING (NO S/S DOCUMENT) |
| MIL-B-81820 Revision F:1994 | Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specification for (S/S by SAE-AS81820) |
| MIL-C-83821 Base Document:1990 | Crane, Wheel Mounted, Crash, Rough Terrain, Hydraulic Full Revolving, 4X4, DED, Fighter Type Aircraft |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR (S/S BY SAE-AS19692) |
| MIL-F-5509 Revision D:1978 | Fitting, Flared Tube, Fluid Connection (see Notice 2 for Additional Superseding Information) |
| MIL C 24308 : C | CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| MIL-I-45914 Revision A:1991 | Insert, Screw Thread - Locked in, Key Locked, General Specification for |
| MIL-I-22075 Revision C:1984 | Indicator, Bearing-Distance-Heading ID-663D/U |
| MIL C 55422 : 0 | CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATIONS FOR |
| MIL-R-47321 Base Document:1987 | REGULATOR, PRESSURE, WATER PUMPED NITROGEN (NO S/S DOCUMENT) |
| AA-F-2815 Base Document:1992 | FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE) (NO S/S DOCUMENT) |
| MIL-W-50930 Base Document:1971 | WARHEAD SECTION, 762MM ROCKET, TRAINING, M42 (NO S/S DOCUMENT) |
| DOD-S-70328 Base Document:1982 | SPACER, RING, METRIC, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
| DOD-B-70331 Base Document:1983 | Bolt, Self Locking, Hexagon Head, Steel, Metric, General Specification for |
| MIL C 22263 : B | COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR |
| ASTM F 844 : 2007 : REV A | Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| MIL-W-50932 Base Document:1971 | Warhead Section, 762MM Rocket, Training: M42 (No S/S Document) |
| MIL-B-25870 Revision A:1972 | Bearing, Sintered Metal, Processing of |
| MIL-A-47309 Revision A:1991 | Amplifier, Pneumatic (S/S by SAE-ARP763) |
| A-A-55628 Revision A:1998 | Nut, Plain, Cap, High Crown UNC-2B and UNF-2B |
| MIL S 25073 : 0 | |
| MIL C 12520/11 : A | CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 26, FEMALE INSERTS) |
| MIL-D-7713 Base Document:1951 | Drift Meter, Type B-5 |
| MIL-B-81819 Revision B:1987 | Bearing, Plain, (Self-Aligning, Sleeve and Thrust) Self-Lubricating, High Speed Oscillation (No S/S Document) |
| MIL-N-85615-3 Base Document:1989 | Nut Assembly, Self-Sealing, Floating, Self-Locking, 125 KSI FTU, 225 Deg. F, Variable Nut Height 1/64 In. Oversize (For Repair) |
| MIL T 5579 : 0 | TANK, SELF-SEALING OIL, AIRCRAFT |
| MIL-T-21578 Revision A:1966 | TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR |
| MIL-C-6629 Base Document:1951 | Carbon Microphone M-15( )/UR (No S/S Document) |
| DOD-S-63543 Base Document:1982 | Stud and Rod, Threaded, Metric, General Specification for (No S/S Document) |
| MIL-C-5584 Revision D:1988 | Container, Shipping and Storage, Metal Reusable (No S/S Document) |
| MIL T 25439 : A (1) | TRANSMITTER, RATE OF FLOW, IN-FLIGHT REFUELLING, 0-10,000 PPM, TYPE MB-3 |
| MIL-T-23643 Base Document:1963 | Test Set, Target Control System AN/SRM Series (AN/SRM-2, AN/SRM-3, AN/SRM-4, AN/SRM-5, and AN/SRM-6) (No S/S Document) |
| FF-W-84 Revision A:1967 | Washers, Lock (Spring) |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL T 83454 : 0 | TERMINAL, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
| MIL-S-58112 Base Document:1989 | SLING, MULTI-LEG, HELICOPTER, EXTERNAL CARGO (NO S/S DOCUMENT) |
| MIL-A-27328 Base Document:1960 | Amplifier-Indicator Group, Altitude-Vertical Speed A/A24G-7 (No S/S Document) |
| MIL I 7304 : B | INDICATOR, PRESSURE TORQUE SENSITIVE TYPE A 9 |
| MIL-I-5488 Revision A:1957 | Indicator, Turn and Slip, 28V, DC, 2-3/4 Size, Type MD-10 (No S/S Document) |
| MIL-I-5482 Revision C:1960 | Indicator, Pressure, Synchro, Aircraft, 165 Degree Scale (No S/S Document) |
| PREN 6067 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, BUTTON HANDLE |
| MIL-P-5238 Revision C:1974 | Pump, Centrifugal, Fuel Booster, Aircraft, General Specification For |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| ASTM F 1387 : 1999 : R2012 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| ASTM B 766 : 1986 : R2003 | Standard Specification for Electrodeposited Coatings of Cadmium |
| MS24693 Revision K:1995 | SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG., CROSS RECESSED, UNC-2A AND UNF-2A (S/S BY NASM24693) |
| NASA MSFC STD 486 : 1992 | STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR |
| MS35338 Revision L:1994 | WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES (S/S BY NASM35338) |
| MIL-N-85615-4 Base Document:1989 | Nut Assembly, Self-Sealing, Low Profile, Floating, Self-Locking, 125KSI FTU, 225 Deg. F |
| MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
| MIL-A-22212 Base Document:1959 | Antennas, At-500 (*)/AP and AT-929(*)/AP, and Antenna Base AB 117(*)/AP (No S/S Document) |
| MIL-DTL-26894 Revision D:1998 | Hose and Hose Assembly, Rubber, Gasoline, Refueling, Low Temperature |
| FF-B-561 Revision D:1989 | Bolts, (Screw), Lag (S/S by ASME-B18.2.1and ASME-B18.18.1M) |
| FF-S-210 Revision B:1981 | Setscrews: Square Head (Inch) and Slotted Headless (Inch and Metric) |
| MIL-F-18280 Revision F:1995 | Fittings, Flareless Tube, Fluid Connection (S/S by SAE-AS18280) |
| MIL I 5099 : B | INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| MIL-I-18804 Revision B:1964 | Indicator, Vertical Speed, 0 - 6000 FPM, 2 Inch |
| NASA MSFC SPEC 250 : 1963 | PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL C 12520/10 : A | CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 26, MALE INSERTS) |
| MIL P 17842 : NOTICE 1 | POWER PLANT VIBRATION ISOLATOR, DESIGN AND INSTALLATION REQUIREMENTS |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| MIL-R-24358 Base Document:1968 | RESTORATION SHIPBOARD ELECTRONIC EQUIPMENT F, 1N AND 2N COGNIZANCE (S/S BY MIL-STD-2110) |
| MIL F 0040048 : B INT (1) | FLAGSTAFFS AND INSIGNIA, FLAGSTAFF HEADS, GENERAL SPECIFICATION FOR |
| MIL-N-85615 Base Document:1986 | Nut, Sealing, Self-Locking, 250 Degrees F, 450 Degrees F General Specification For |
| MIL S 8834 : F | SWITCH, TOGGLE, POSITIVE BREAK, GENERAL SPECIFICATION FOR |
| MIL G 8360 : A | GAGE, PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE, 10-75 IN MERCURY TYPE MB 1 |
| MIL-T-5684 Revision B:1981 | Tie Rod: Round and Square, Aircraft (No S/S Document) |
| MIL-G-16408 Revision B:1953 | Gage, Liquid Level, Tape, and Float, Direct Reading (For Shipboard Use) (No S/S Document) |
| DOD-S-63275 Revision A:1982 | Stud, Screw Thread, Locked in, Ring Locked, Serrated, Metric and Ring, Lock, Serrated, Metric, General Specification for (No S/S Document) |
| NNN-T-580 Base Document:1963 | TONGS, LABORATORY (S/S BY A-A-51358) |
| MIL C 12520/8 : A | CONNECTORS, RECEPTACLE, ELECTRICAL WATERPROOF (SHELL SIZE 20, MALE INSERTS) |
| MIL-L-21652 Revision A:1964 | Light, Beacon, Anticollision, Aircraft, General Specification for |
| MIL S 9479 : C | |
| MIL T 6349 : C NOTICE 1 | TEST SET, SYNCHRO |
| MIL-I-58067 Revision A:1977 | Indicator, Vertical Velocity, Rapid Response Acceleration Sensitive, General Specification for (No S/S Document) |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| MIL C 8783 : A | CLAMP, HOSE, FLAT BAND 500 DEG. F |
| GGG-S-001333 Revision A Interim Revision:1975 | SCRAPER AND SQUEEGEE, VEHICLE WINDOW (S/S BY A-A-3070) |
| AA-B-00540 Revision D Interim Revision:1978 | BOOKCASE SECTIONS, BASE AND TOP, STEEL, CONTEMPORARY STYLE (NO S/S DOCUMENT) |
| MIL-S-10522 Revision K:1975 | Simulator, Booby Trap, Whistling, M119, Parts for and Loading, Assembling, and Packing |
| MIL-I-81508 Base Document:1966 | Indicator Plug, for Missile Propellants (No S/S Document) |
| MIL-N-3336 Revision A:1964 | Nut, Sheet Spring, Instrument Mounting |
| MIL-V-5622 Revision A:1963 | Volt-Ammeter, Dual Pointer Direct Current |
| MIL-F-60988 Revision B:1973 | Fuze, PD, M551 Less Booster (No S/S Document) |
| MIL-C-11569 Revision D:1979 | Clamps, Hose, Water, Universal 3/8- to 1-Inch and 1- to 3-Inch (S/S by SAE-J536 or WW-C-440) |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-B-6038 Revision A:1961 | Bearing, Ball, Bellcrank, Anti-Friction, Airframe (S/S by SAE-AS6038) |
| MIL-M-21365 Revision A:1961 | Microphone, Carbon, Noise Canceling, Type M-58/U (No S/S Document) |
| MIL-B-8948 Revision A:1972 | Bearing, Plain, Rod End, TFE Lined, Self-Aligning |
| MIL-S-6551 Revision A:1981 | Seat, Crew, Downward Ejection, Aircraft |
| DOD-T-63549 Base Document:1982 | THUMBSCREW, WING HEAD, METRIC, GENERAL SPECIFICATION FOR (METRIC) |
| MIL C 27889 : D | COMPUTER, TRANSDUCER, ALTITUDE, ALTITUDE ENCODING, CPU-46/A, GENERAL SPECIFICATION FOR AND MTU-38/A MOUNTING TRAY |
| FF-S-107 Revision C:1969 | Screw, Tapping and Drive |
| MIL-C-11760 Revision D:1979 | Clamps, Hose, Pneumatic, for Universal Couplings (S/S by SAE-J536) |
| MIL W 3903 : D | WIRE ROPE ASSEMBLY, SINGLE LEG |
| MIL-I-23264 Revision A:1968 | Insulators, Ceramic, Electrical and Electronic, General Specification for |
| MIL-I-85352 Base Document:1980 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING |
| MIL-R-50858 Revision C:1979 | ROCKET, PRACTICE, 35MM, SUBCALIBER, M73, PARTS FOR LOADING AND ASSEMBLING (NO S/S DOCUMENT) |
| MIL P 27235 : A | PIN, STRAIGHT, HEADED (CLEVIS PINS) |
| ASTM B 766 : 1986 : R2015 | Standard Specification for Electrodeposited Coatings of Cadmium |
| MIL-C-27251 Revision A:1971 | Cleaning Compound, Aircraft Surface, Low Temperature (No S/S Document) |
| DOD-P-63479 Base Document:1981 | PIN, STRAIGHT, HEADED (CLEVIS PIN) GENERAL SPECIFICATION FOR, METRIC |
| MIL H 26894 : C | HOSE ASSEMBLY, RUBBER, GASOLINE, REFUELING, LOW TEMPERATURE |
| MIL-W-10698 Revision C:1969 | WRENCH, OPEN END, AND WRENCH ASSEMBLY, STAMPED STEEL (S/S BY A-A-59220) |
| MIL-G-81168 Base Document:1964 | Gyroscope, Rate Integrating (No S/S Document) |
| MIL-P-83037 Revision A:1968 | Platform, Cargo, Aerial Delivery A/E29H-1 (No S/S Document) |
| MIL-C-81991 Base Document:1975 | Converter, Aircraft DC to DC, Boost General Specification for (No S/S Document) |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL-C-26485 Revision D:1968 | Control Assembly, Attitude Gyroscopic AF/A24G-1A (No S/S Document) |
| MIL-R-23761 Revision B:1975 | Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for |
| SAE MA2005B | Tube Fittings, Aerospace Fluid Systems, Separable, For 24° Cone, General Specification, Metric (ISO 7169) |
| MIL-I-22126 Revision B:1972 | Indicator, Torquemeter, Engine, Turboprop |
| MIL-I-23366 Revision B:1987 | Indicator, Horizontal Situation ID-1013(*)/A |
| MIL I 83452 : LATEST | INDICATOR, TAPE TYPE, GENERAL SPECIFICATION FOR |
| MIL-B-81949 Base Document:1974 | Brushes, Flap, Rotary, Abrasive, General Specification for (No S/S Document) |
| MIL-A-17204 Revision D:1982 | Adapters, Straight or Reducing, Pipe Thread to Hose Thread (S/S by A-A-2622) |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL, 5,000 AND 10,000 POUND CAPACITIES (NO S/S DOCUMENT) |
| MIL I 23145 : B | INFLATION ASSEMBLIES, LIFE PRESERVER |
| MIL-S-5804 Revision C:1967 | Seat, Aircraft, Troop Wall-Style (No S/S Document) |
| MIL C 25478 : B | COOLER, LUBRICATING OIL, AIRCRAFT ENGINE, SYNTHETIC OIL, GENERAL SPECIFICATION FOR |
| RR-G-700 Revision B:1963 | GRIP, WIRE, STRAND, WIRE ROPE AND CABLE |
| MIL-S-70334 Base Document:1987 | Shim, Solid (No S/S Document) |
| MIL-I-83751 Base Document:1967 | Indicator, Safety Level, RF (No S/S Document) |
| MIL F 6001 : A | FITTING, AIRCRAFT, SOLDER TYPE TUBE |
| MIL-C-10464 Revision F:1990 | Cans, Hermetic Sealing, Metal, Light Gage, Tear-Strip Type |
| MIL-A-25896 Revision E:1983 | Adapter, Pressure Fuel Servicing, Nominal 2.5-Inch Diameter |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| MIL-H-27269 Revision A:1977 | Horizontal Situation Indicator Group AF/A24J-1 (No S/S Document) |
| MIL-S-3644 Revision B:1985 | Shaft Assembly, Flexible (No S/S Document) |
| MIL R 83936 : B | REMOVER, PAINT, TANK TYPE, FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS, AND OTHER AIRCRAFT AND AGE COMPONENTS |
| MIL-R-23057 Base Document:1961 | Regulator, Compressed Air, High Pressure (3500 PSI) |
| MIL-R-60897 Base Document:1968 | Remover, Aircraft Canopy: M8A1 Metal Parts Assembly (Conversion) |
| MIL-G-23723 Base Document:1964 | Gyroscope, Rate Switching CN-495/AJB-3 |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL G 23701 : 0 | MILITARY SPECIFICATION GYROSCOPE, RATE SWITCHING AN/ASN-52 |
| MIL-C-8412 Revision B:1969 | Compass, Magnetic, Slaved Gyro, Type J-4 (No S/S Document) |
| MIL-S-63302 Base Document:1979 | Safety and Arming Assemblies For Mines: M74 and M75 |
| MIL-S-63326 Base Document:1981 | Safety and Arming Assemblies for Mines: BLU-91/B AND BLU-92/B |
| MIL-D-8181 Revision B:1965 | Detector, Ice, Air Intake Duct, Aircraft Engines and Airframe Systems, General Specification for (S/S by SAE-AS8181) |
| MIL I 6424 : A NOTICE 1 | INDICATOR, INDUCTION COMPASS, TYPE V 8 |
| MIL-B-5046 Revision D:1968 | Board, Chart Plotting, MK7 (No S/S Document) |
| P-C-444 Revision B:1983 | Cleaning Compound, Solvent Soluble, Grease Emulsifying |
| MIL C 5015 : G | CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR |
| BS ISO 9758:2000 | Fork-ends, in corrosion-resistant steel, threaded, for rolling bearings, for aircraft control wire rope. Dimensions and loads |
| MIL-G-83380 Base Document:1979 | Generator Set, Gas Turbine Engine Driven, 60KW, 400 HZ (No S/S Document) |
| MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
| BS ISO 9738:2000 | Turnbarrels, for aircraft control wire rope. Dimensions and loads |
| MIL-C-22542 Revision B:1987 | Cleaning Compound, High Pressure Cleaner, Liquid (S/S by SAE-AMS-C-22542) |
| DOD C 83527 : 0 | CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR MULTIPLE INSERT TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 150 DEGREES C - TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL-P-85034 Base Document:1976 | POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN (NO S/S DOCUMENT) |
| NASA MSFC SPEC 384 : 1964 | LEAK TEST COMPOUND, LOX COMPATIBLE |
| MIL C 28748 : B | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-T-38306 Base Document:1964 | Transmitter, Rate Gyroscope T-970/AJB-7 (No S/S Document) |
| MIL-G-7817 Base Document:1951 | Gage, Fuel Quantity, Capacitor Type, Uncompensated, General Specification for (S/S BY MIL-G-26988) |
| MIL F 22606 : C | FLASK COMPRESSED GAS AND END PLUGS FOR AIR, OXYGEN AND NITROGEN |
| MIL-DTL-81014 Revision B:2001 | Hook, Helicopter External Cargo, 20,000 Pound Capacity, Type C (No S/S Document) |
| MIL-PRF-29607 Base Document:1996 | Cleaning Compound, Avionics Components, Non-Ozone Depleting |
| MIL-D-83411 Revision A:1973 | Deicer/Anti-Icer Fluid (for Runways and Taxiways (S/S by AMS-1432) |
| MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
| MIL-T-38760 Base Document:1966 | Tensiometer Dial Indicating (S/S by A-A-59380) |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL-B-23072 Base Document:1961 | Blower, Anti-Exposure Suit Ventilation, General Specification for(No S/S Document) |
| MIL-D-81227 Revision B:1976 | Detector Kit, Water, Automotive - Aviation Fuel (No S/S Document) |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-C-9075 Revision A:1968 | Computer and Transmitter, True Airspeed, Pitot-Static, 150-900 Knots, Type MA-1 (No S/S Document) |
| MIL-F-51477 Base Document:1982 | Filter, Particulate, High Efficiency, Fire Resistant, Biological Use, General Specification for (No S/S Document) |
| MIL P 18722 : 0 | PYROMETERS, PORTABLE, HANDHELD. |
| MIL-R-7885 Revision D:1988 | Rivets, Blind, Structural, Mechanically LockedSpindleand Friction Locked Spindle, General Specification for |
| MIL-C-52705 Revision B:1994 | Couplings: Hose, Steam |
| FF-S-88 Revision B:1977 | Screw, Eye |
| GGG-S-00825 Revision A Interim Revision:1971 | SWAGING TOOL, FLEXIBLE CABLE TERMINAL (NO S/S DOCUMENT) |
| MIL-C-11218 Revision E:1988 | Conveyors, Roller and Wheel, Gravity and Conveyor Supports |
| MIL-S-24240 Base Document:1966 | SCREW, COLLAR, 12-POINT, EXTERNAL WRENCHING (FUTURE ACQUISITION USE SAE 358, FLANGED 12-POINT SCREWS) |
| MIL P 83206 : B | PITOT STATIC TUBE, L SHAPED, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL L 24047 : A | LIFE PRESERVER, YOKE TYPE, SCUBA, U.S. NAVY MARK 3 |
| MIL-A-22165 Base Document:1959 | Amplifier, Compass, Servo (Type MF-1 Compass) |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000-LB CAPACITY, TYPE MC-1 (S/S BY MIL-T-27260) |
| MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
| MIL-I-21685 Base Document:1958 | Indicator, Compass Repeater, Rotating Dial, Type MW-2 |
| MIL A 25676 : D | ADAPTOR, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT |
| MIL F 38363 : B (3) | FUEL SYSTEM, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-27261 Revision A:1966 | Accelerometer, Aircraft |
| DOD-W-63474 Revision B:1994 | Washers, Spring Tension, Metric, General Specification for |
| ISO 9758:2000 | Aerospace — Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope — Dimensions and loads |
| ASTM F 1387 : 1999 : R2005 | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
| MS75009 Revision J:2005 | Bracket Assembly, Resistor (Power Type) |
| MIL-DTL-18240 Revision F:1997 | Fastener Element, Self-Locking, Threaded Fastener, 250 Degrees F Maximum |
| MIL-DTL-85097 Revision E:2000 | USN/USMC Propellant Actuated Devices (PADS), General Specification for |
| MIL-PRF-81733 Revision D:1998 | Sealing and Coating Compound, Corrosion Inhibitive |
| MIL-B-81934 Revision B:1991 | Bearings, Sleeve, Plain and Flanged, Self-Lubricating, General Specification for (S/S by SAE-AS81934) |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| DOD-I-63276 Revision A:1983 | Insert, Screw Thread, Locked in, Ring Locked, Serrated, Metric, General Specification for |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE (S/S BY A-A-2113) |
| MIL S 4510 : E | SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE |
| MIL-F-8378 Revision B:1975 | Frequency Meters, Aircraft 380 to 420 Hertz and 350 to 450 Hertz (No S/S Document) |
| AA-D-001923 Base Document:1975 | DESK ATTACHMENTS, \"L\" RETURN PLATFORM, CONTEMPORARY STYLE (S/S BY A-A-2093) |
| MIL-F-8615 Revision D:1976 | Fuel System Components, General Specification for (S/S by SAE-ARP8615) |
| MIL-S-21433 Revision A:1959 | Sockets, Turnbuckles, and Turnbuckle Assemblies - Wire Rope, Wedge, and Threaded Lock Sleeve |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| MIL-W-48271 Revision A:1984 | Warhead Metal Parts Assembly M251 Parts and Assembling |
| BS ISO 9757:2000 | Fork-ends, in corrosion-resistant steel, threaded, for aircraft control wire rope turnbarrels. Dimensions and loads |
| MIL-I-21718 Base Document:1958 | Indicator, Airspeed, Pitot Static, Maximum Allowable Speed, 40-400 Knots |
| MIL-DTL-27426 Revision C:1998 | Rings, Retaining, Spiral (Uniform Cross Section) |
| MIL-S-21277 Revision A:1958 | SWITCHES, LIQUID LEVEL, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
| MIL-B-7949 Revision E:1981 | Bearing, Ball, Airframe, Antifriction (S/S by SAE-AS7949) |
| MIL-S-29398 Revision C:1984 | Sling System, Helicopter: External Cargo, 40,000 Pound Capacity (No S/S Document) |
| MIL-R-29583 Base Document:1992 | Radio Set, AN/ARC-210(V) (No S/S Document) |
| MIL T 83174 : B (3) | TRANSMITTER, ACCELEROMETER, AXIAL |
| RR-S-001301 Base Document:1967 | Safety Equipment, Climbing (No S/S Document) |
| MIL W 12133 : D | WASHER, SPRING TENSION GENERAL SPECIFICATION FOR |
| MIL H 13444 : E | HOSE & HOSE ASSEMBLIES, RUBBER: FUEL AND OIL |
| MIL-A-85672 Base Document:1987 | Amplifier, Radio Frequency AM-7177A/ARC |
| MIL-G-26988 Revision C:1971 | Gage, Liquid Quantity, Capacitor Type Transistorized, General Specification for (No S/S Document) |
| MIL-C-22249 Revision B:1989 | Connector Sets, Electrical, Hermetically Sealed, Submarine General Specification for |
| MIL-W-18326 Revision A:1956 | WELDING OF MAGNESIUM ALLOYS, GAS AND ARC, MANUAL AND MACHINE PROCESSES FOR (S/S BY MIL-STD-2219) |
| MIL N 45913 : B | NUTS, SELF LOCKING, HEXAGON, PREVAILING-TORQUE |
| SAE AS5604A | Compass; Magnetic, Pilot\'s Standby |
| MIL-R-81903 Revision A:1977 | Remover, Acid Activated, for Amine-Cured Epoxy Coating Systems |
| AA-D-001918 Base Document:1975 | DESKS, FLAT TOP, STEEL, CONTEMPORARY STYLE (S/S BY A-A-2095) |
| MIL-I-27680 Revision C:1973 | Indicator, Altitude ARU-12/A, Remote (No S/S Document) |
| SAE AS 85075 : 2000 | TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) (S/S BY A-A-2953) |
| MIL C 83527 : A | |
| MIL C 23216 : C | CONTACTS, ELECTRIC CONNECTOR, GENERAL SPECIFICATION FOR |
| MIL-R-81835 Base Document:1971 | REMOVER, ORGANIC COATING, HOT TANK TYPE (S/S BY SAE-AMS-R-81835) |
| MIL-S-7877 Revision B:1956 | Seat, Passenger, Cabin Folding |
| MIL C 22992 : E | CONNECTOR, PLUGS AND RECEPTACLES, ELECTRICAL, WATERPROOF, QUICK DISCONNECT, HEAVY DUTY TYPE GENERAL SPECIFICATION FOR |
| MIL-P-11268 Revision L:1983 | PARTS, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT (NO S/S DOCUMENT) |
| MIL-I-27623 Revision C:1972 | Indicator, Attitude, Remote Standby, 2 Inch (No S/S Document) |
| MIL C 52404 : B | CONNECTIONS: HOSE, FIRE AND WATER |
| MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
| MIL-I-83117 Revision B:1975 | Indicator, Angle of Attack (No S/S Document) |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL-C-14039 Revision C:1981 | Compass, Sun, Universal Type 0 th 90 Degrees, North and South Latitudes, with Carrying Case (No S/S Document) |
| MIL I 45916 : B | INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| MIL-F-40048 Revision C:1984 | Flagstaffs and Insignia, Flagstaff Heads, General Specification for |
| MIL-R-14368 Revision C:1974 | REGULATOR ASSEMBLY, RELAY ASSEMBLY, AND VOLTAGE REGULATOR ASSEMBLY: 24-VOLT (NOMINAL RATING), 100 TO 400 AMPERE, DIRECT CURRENT (S/S BY MIL-DTL-62576) |
| FF-S-111 Revision D:1974 | Screw, Wood |
| MIL-B-55252 Revision B:1992 | Batteries, Non-Rechargeable, Magnesium (No S/S Document) |
| MIL-G-27693 Revision A:1962 | Gyroscope, Displacement SBU-6/A, Roll and Pitch (No S/S Document) |
| MIL-I-25645 Revision D:1970 | Indicator, Liquid Oxygen Quantity, Capacitance Type, General Specification for |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| MIL-G-5678 Revision C:1964 | Gage, Pressure, Dial Indicating, Manifold Pressure (No S/S Document) |
| MIL G 5413 : D NOTICE 1 | GENERATOR, TACHOMETER, FOUR POLE |
| MIL-F-5504 Revision B:1958 | Filters and Filter Elements, Fluid Pressure, Hydraulic Micronic Type |
| MIL-I-38258 Base Document:1965 | Indicator, Attitude ARU-18/A, Director (No S/S Document) |
| MIL-A-27671 Revision B:1965 | Amplifier-Indicator Group, Altitude-Vertical Speed A/A24G-11 (No S/S Document) |
| MIL G 24211 : 0 | GASKET, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
| MIL-H-9859 Revision A:1968 | Handwheel, Ordinance (No S/S Document) |
| MIL-B-8976 Base Document:1969 | Bearings, Plain, Self-Aligning, All-Metal (S/S by SAE-AS8976) |
| MIL M 62361 : C | MOTOR, DRIVE, DIRECT CURRENT 2 RPM/8RPM |
| DOD-N-63548 Base Document:1982 | Nut, Plain, Hexagon, Wheel Mounting, Metric General Specification for (No S/S Document) |
| MIL-I-27619 Revision G:1974 | Indicators, Attitude Director |
| MIL-M-7969 Revision C:1965 | Motors, Alternating Current, 400-Cycle, 115/200-Volt System, Aircraft, General Specification for |
| MIL I 27851 : B | INDICATOR, INDICATED AIRSPEED AVU-17/A |
| MIL A 25949 : E (2) | ACCELEROMETER, AIRCRAFT RANGE -5 TO PLUS 1OG UNITS, INTEGRALLY LIGHTED |
| DOD-P-63478 Base Document:1981 | Pin, Straight, Headless (Dowel), General Specification for, Metric |
| MIL-A-58066 Revision A:1966 | Altimeter, Pressure, Parachutist\'S (No S/S Document) |
| MIL R 70337 : 0 | RING, RETAINING, ROUND SECTION GENERAL SPECIFICATION FOR |
| MIL M 62368 : A | MOTOR, GEARHEAD, 18-30 VOLTS, DIRECT CURRENT |
| MIL-F-51068 Revision F:1986 | Filters, Particulate (High-Efficiency Fire Resistant) (S/S by ASME-AG1) |
| SAE AS6011 | Cylinders, Carbon Dioxide Filled, Technical |
| MIL L 25866 : B | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU AND 1-A |
| MIL-B-3990 Revision D:1980 | Bearings, Roller, Needle, Airframe, Antifriction, Inch (S/S by SAE-AS39901) |
| MIL-I-23524 Revision A:1986 | Indicator, Attitude-Director, Remote, ID 1329A (V) |
| MIL-S-10521 Revision K:1983 | Simulator, Booby Trap, Flash, M117 Parts for and Loading Assembling and Packing |
| MIL C 22442/32 : A | CABLE ASSEMBLY, RADIO FREQUENCY (AIRCRAFT AUDIO), ASSOCIATED PARTS |
| ISO 9736:2000 | Aerospace — Eye-ends, in steel, threaded, for aircraft control wire rope — Dimensions and loads |
| MS24466 Revision K:1998 | Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type VI, Anti-friction, Inch (Refer to SAE-AS24466) |
| DOD-C-85050 Base Document:1982 | Charger, Battery, Nickel-Cadmium, Aircraft General Specification for (No S/S Document) |
| MIL-I-81049 Revision A:1972 | Indicator, Temperature, Electrical Resistance, Voltage Compensated, Multifunction (No S/S Document) |
| MIL G 9398 : C | GENERATOR, TACHOMETER, TWO POLE HIGH TEMPERATURE AIRCRAFT |
| MIL-D-38134 Revision A:1971 | Detector, Magnetic Azimuth DSU-4/A, High Temperature (No S/S Document) |
| DOD-P-63464 Revision A:1982 | Pin, Grooved, Headless-Longitudinal Groove, Metric, General Specification for |
| MIL-H-29144 Revision B:1985 | Hood, Fireman\'s, Aluminized, Proximity (S/S by MIL-H-24925) |
| MIL-S-5733 Revision B:1952 | SOLENOID, FUSE ARMING, TYPE F-1 (NO S/S DOCUMENT) |
| MIL C 38333 : 0 | CONTROLLER, COMPASS SYSTEM C-6448/ASN-55 |
| MIL-E-6719 Revision A:1972 | Elbow, Electrical Conduit (No S/S Document) |
| MIL-I-7906 Revision A:1961 | Indicator, Gyro Horizon, Manually Caged, Electric, Type MB-1 |
| MIL-H-81324 Base Document:1966 | Honing Machine, Dry, Portable (No S/S Document) |
| MIL C 25955 : 0 | CONNECTOR, ELECTRICAL, ENVIRONMENT RESISTING MINIATURE, WITH SNAP-IN CONTACTS |
| MIL-B-8621 Revision A:1964 | Board, Chart, Mark 6A, Mark 6B and Mark 6C |
| KKK-T-728 Revision A:1973 | Truck, Hand, Two-Wheeled (Light Duty) 300 Pound Capacity |
| MIL C 85570 : B (1) | CLEANING COMPOUND, AIRCRAFT, EXTERIOR |
| MIL-N-3337 Revision C:1985 | Nut, Sheet Spring |
| MIL-DTL-26517 Revision B:2000 | Power Supply, Transformer-Rectifier, Aircraft, General Specification for |
| MIL-C-5191 Revision B:1953 | Computer and Transmitter, True Airspeed Pitot Static, Type A-2 (No S/S Document) |
| MIL M 5388 : B | MACHMETER; PITOT STATIC OPERATED, RANGE 0.5 TO 1.5, TYPE A-2B |
| MIL-F-25173 Revision A:1956 | Fastener, Control Panel, Aircraft Equipment |
| MIL-R-24243 Revision C:1987 | RIVET, BLIND, NON-STRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR |
| MIL-S-10555 Revision H:1975 | Simulator, Booby Trap, Illuminating M118 Parts for, and Loading, Assembling and Packing |
| MIL-R-11050 Revision B:1969 | RECTIFIER, METALLIC, SELENIUM (NO S/S DOCUMENT) |
| MIL-W-5013 Revision L:1991 | Wheel and Brake Assemblies, Aircraft General Specification For |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| SAE AS8660 | Silicone Compound NATO Code Number S-736 |
| MIL R 3390 : F | RINGS, DEE |
| MIL T 25627 : C | TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| MIL-A-27391 Revision B:1963 | Altimeter, Pressure AAU-2/A (No S/S Document) |
| ASTM B 766 : 1986 : R2008 | Standard Specification for Electrodeposited Coatings of Cadmium |
| MIL-B-55679 Base Document:1969 | Battery, Dry (Special Purpose) (No S/S Document) |
| SAE AMSR81835 | Remover, Organic Coating, Hot Tank Type |
| MIL-C-81562 Revision B:1983 | Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) (S/S by SAE-AMS-C-81562) |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-STD-1312-1 Base Document:1984 | FASTENER TEST METHODS - METHOD 1, SALT SPRAY (S/S BY NASM1312-1) |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| MIL-STD-1312-5 Revision A:1984 | FASTENER TEST METHODS METHOD 5, STRESS DURABILITY (S/S BY NASM1312-5) |
| MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (S/S BY SAE-AMS-S-5000) |
| MIL-STD-1312-12 Base Document:1985 | FASTENER TEST METHODS, METHOD 12, THICKNESS OF METALLIC COATINGS (S/S BY NASM1312-12) |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK, AND MECHANICAL TUBING, LOW ALLOY, PREMIUM QUALITY (S/S BY SAE-AMS6414 AND SAE-AMS6257) |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| TT-C-490 Revision F:2013 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| MIL-STD-1312-14 Base Document:1987 | FASTNER TEST METHODS METHOD 14 STRESS DUPABILITY INTERNALLY THREADED FASTENERS (S/S BY NASM1312-14) |
Summarise
£13.91
Excluding VAT
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.