• There are no items in your cart

AS/NZS 1554.2:2003

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Structural steel welding Stud welding (steel studs to steel)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

05-25-2024

Published date

08-05-2003

Preview

Specifies requirements for the stud welding of steel studs to steel elements, such steel studs being used for the attachment of members and connection devices to concrete, and for fastening of other members and appurtenances. This Standard does not apply to the welding of studs to pressure vessels.

This Standard prescribes requirements for the stud welding of steel studs to steel elements, such steel studs being used for the attachment of members and connection devices to concrete (as concrete anchors and as shear connectors in composite steel/concrete construction), and for the fastening of other members and appurtenances. It also applies to the stud welding of steel studs through light-gauge steel sheet either coated or not coated, and includes requirements for the stud material, the parent material, the qualification of stud bases, stud welding procedure and operators, and the workmanship and testing of the finished welds. This Standard does not apply to the welding of studs to pressure vessels. A list of matters for resolution between the principal and fabricator is given in Appendix A.

Committee
WD-003
DevelopmentNote
Under Revision by DR AS 1554.2:2021.
DocumentType
Standard
ISBN
0 7337 5382 5
Pages
25
ProductNote
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS CA8.2-1972.Revised and redesignated as AS 1554.2-1974.Second edition 1980.Third edition 1993.Jointly revised and designated AS/NZS 1554.2:2003. Originated as AS CA 8.2-1972. Previous edition AS 1554.2-1993. Jointly revised and designated AS/NZS 1554.2:2003. Reissued incorporating Amendment No. 1 (December 2003).

AS/NZS 2865:2001 Safe working in a confined space
AS 1443-1994 Carbon steels and carbon-manganese steels - Cold-finished bars
AS 1450-1983 Steel tubes for mechanical purposes
AS 1674.1-1997 Safety in welding and allied processes Fire precautions (Reconfirmed 2016)
AS 1966.1-1985 Electric arc welding power sources - Transformer type
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS 1450-2007 Steel tubes for mechanical purposes (Reconfirmed 2017)
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 1391-1991 Methods for tensile testing of metals
AS/NZS 1338.1:1992 Filters for eye protectors Filters for protection against radiation generated in welding and allied operations
AS 1674.2-2003 Safety in welding and allied processes - Electrical
AS 1548-1995 Steel plates for pressure equipment
AS/NZS 1554.4:1995 Structural steel welding - Welding of high strength quenched and tempered steels
AS 1391-2007 Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS 1966.2-1985 Electric arc welding power sources - Rotary type
AS/NZS 4360:2004 Risk management
AS 2812-1985 Welding, brazing and cutting of metals - Glossary of terms
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 1470-1986 Health and safety at work - Principles and practices
AS/NZS 1554.5:1995 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1443-2004 Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022)
AS/NZS 1995:1995 Welding cables
AS/NZS 1595:1998 Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016)
AS/NZS 1995:2003 Welding cables (Reconfirmed 2017)
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 2799-1992 Resistance welding equipment - Single-phase a.c. transformer type
AS 1674.2-2007 Safety in welding and allied processes Electrical (Reconfirmed 2018)
AS 1163-1991 Structural steel hollow sections
AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 1336:1997 Recommended practices for occupational eye protection
AS 3597-1993 Structural and pressure vessel steel - Quenched and tempered plate
AS/NZS 3679.2:1996 Structural steel - Welded I sections
AS/NZS 4360:1999 Risk management
AS 2812-2005 Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018)
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1337:1992 Eye protectors for industrial applications

AS/NZS 2980:2018 Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand
AS 2159-1995 Piling - Design and installation
AS/NZS 4600:2018 Cold-formed steel structures
AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS 5047-2005 Hydraulic shoring and trench lining equipment
AS 2214-2004 Certification of welding supervisors - Structural steel welding
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS/NZS 4600:2005 Cold-formed steel structures
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS 4722-2009 Passenger ropeways and passenger conveyors
AS EN 12079.2-2010 Offshore containers and associated lifting sets Lifting sets - Design, manufacture and marking (EN 12079-2:2006, MOD)
AS 1692-2006 Steel tanks for flammable and combustible liquids (Reconfirmed 2016)
AS/NZS 3679.2:2016 Structural steel Welded I sections
AS/NZS 3678:2016 Structural steel - Hot-rolled plates, floorplates and slabs
AS 5100.6-2004 Bridge design - Steel and composite construction
AS 3533.3-2003 Amusement rides and devices In-service inspection (Reconfirmed 2013)
AS/NZS ISO 3834.5:2008 Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4
AS/NZS 3679.1:2016 Structural steel Hot-rolled bars and sections
AS 4991-2004 Lifting devices
AS 2327.1-2003 Composite structures Simply supported beams
AS 3533.1-2009 Amusement rides and devices Design and construction
AS 2980-2004 Qualification of welders for fusion welding of steels
AS/NZS 1577:2018 Scaffold decking components
AS 1735.8-1986 Lifts, escalators and moving walks (known as the SAA Lift Code) Inclined lifts
AS/NZS 2327:2017 Composite structures - Composite steel-concrete construction in buildings
AS 1448-2007 Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS 2550.1-2002 Cranes, hoists and winches - Safe use General requirements
AS EN 12079.3-2010 Offshore containers and associated lifting sets Periodic inspection, examination and testing (EN 12079-3:2006, MOD)
AS/NZS 2980:2007 Qualification of welders for fusion welding of steels
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
AS/NZS 3678:2011 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3584.3:2012 Diesel engine systems for underground coal mines Maintenance
AS/NZS 5100.6:2017 Bridge design Steel and composite construction
AS 2359.1-1995 Powered industrial trucks - General requirements

View more information
US$67.79
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.