AS/NZS 1594:2002
Current
The latest, up-to-date edition.
Hot-rolled steel flat products (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
08-27-2002
Specifies requirements for hot-rolled steel plate, floor plate, steel and strip rolled on a continuous mill, in thicknesses up to 8mm for formability and extra formability grades, and up to 16mm for other grades, and for widths up to 2000mm. It includes slit material, provided that the parent metal has an as-rolled width of not less than 600mm.
Committee |
MT-001
|
DocumentType |
Standard
|
ISBN |
0 7337 4765 5
|
Pages |
20
|
ProductNote |
Reconfirmed 23/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/12/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for hot-rolled steel plate, floorplate, sheet and strip, rolled on a continuous mill, in thicknesses up to 8 mm for formability and extra formability grades and up to 16 mm for other grades, and for widths up to 2 000 mm. It includes slit material, provided that the parent material has an as-rolled width of not less than 600 mm. The Standard specifies the following grade requirements:(a) For analysis grades—chemical composition only.(b) For formability grades, extra formability grades, and structural grades including weather-resistant grades—both chemical composition and mechanical properties.(c) For floorplate—both chemical composition and mechanical properties.The Standard permits the addition of boron and micro-alloying elements for the achievement of special properties.NOTES: 1 This Standard does not cover the following:(a) Steel plate for boilers and pressure vessels (see AS 1548).(b) Hot-rolled structural steel plates, floorplates and slabs (see AS/NZS 3678).2 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.3 Alternative means for demonstrating compliance with this Standard are given in Appendix B.
Originated as part of AS G2-1945 and AS G33-1971.
Previous edition AS/NZS 1594:1997.
Sixth edition 2002.
AS 2505.1-1981 | Methods for bend and related testing of metals Sheet, strip and plate |
AS 2338-2004 | Preferred dimensions of wrought metal products |
AS 2505.1-2004 | Metallic materials Sheet, strip and plate - Bend tests |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS/NZS 1365:1996 | Tolerances for flat-rolled steel products (Reconfirmed 2016) |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS/NZS 1050.1:1996 | Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
AS 2338-1980 | Preferred dimensions of wrought metal products |
AS 1391-1991 | Methods for tensile testing of metals |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 1548-1995 | Steel plates for pressure equipment |
AS 2304:2019 | Water storage tanks for fire protection systems |
AS/NZS 3845.2:2017 | Road safety barrier systems and devices Road safety devices |
AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
AS/NZS 1576.1:2010 | Scaffolding General requirements |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
AS/NZS 2980:2018 | Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand |
AS/NZS 1576.2:2016 | Scaffolding Couplers and accessories |
AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
AS/NZS 2041.6:2010 | Buried corrugated metal structures Bolted plate structures |
AS/NZS 3509:2003 | LP Gas fuel vessels for automotive use |
AS/NZS 2638.1:2011 | Gate valves for waterworks purposes Metal seated (Reconfirmed 2022) |
AS/NZS 4600:2018 | Cold-formed steel structures |
AS/NZS 4968.3:2003 | Heavy-road vehicles - Mechanical coupling between articulated vehicle combinations Kingpins and associated equipment |
AS 3983-1991 | Metal drums for insulated electric cables and bare conductors (Reconfirmed 2016) |
AS/NZS 4677:2010 | Steel utility services poles |
AS/NZS 1554.2:2003 | Structural steel welding Stud welding (steel studs to steel) |
AS/NZS 1554.7:2006 | Structural steel welding Welding of sheet steel structures |
AS/NZS 4994.1(INT):2004 | Temporary roof edge protection for housing and residential buildings General requirements |
AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
AS/NZS 4600:2005 | Cold-formed steel structures |
AS/NZS 1554.5:2011 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 4181-2013 | Repair and off-take clamps for water industry purposes (Reconfirmed 2023) |
AS/NZS 2638.2:2011 | Gate valves for waterworks purposes Resilient seated (Reconfirmed 2022) |
AS/NZS 1576.2:2009 | Scaffolding Couplers and accessories |
AS 2809.2:2020 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
AS/NZS 4998:2009 | Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022) |
AS 2159-2009 | Piling - Design and installation |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 5100.6-2004 | Bridge design Steel and composite construction |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
AS 1577-1993 | Scaffold planks |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 1576.3:1995 | Scaffolding Prefabricated and tube-and-coupler scaffolding |
AS 2327.1-2003 | Composite structures Simply supported beams |
AS 2980-2004 | Qualification of welders for fusion welding of steels |
AS 1576.4-1991 | Scaffolding Suspended scaffolding |
AS/NZS 4968.3:2011 | Heavy road vehicles - Mechanical coupling between articulated vehicle combinations Kingpins and associated equipment |
AS 2143-1978 | Industrial and commercial steel shelving |
AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS/NZS 1577:2018 | Scaffold decking components |
AS 1210-1997 | Pressure vessels |
AS/NZS 1576.5:1995 | Scaffolding Prefabricated splitheads and trestles |
AS 2273-1979 | Steel library shelving |
AS 3996:2019 | Access covers and grates |
AS/NZS 2327:2017 | Composite structures - Composite steel-concrete construction in buildings |
AS/NZS 1576.4:2013 | Scaffolding Suspended scaffolding (Reconfirmed 2024) |
AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS/NZS 2980:2007 | Qualification of welders for fusion welding of steels |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
AS/NZS 3509:2009 | LP Gas fuel vessels for automotive use (Reconfirmed 2019) |
AS 1576.2-1991 | Scaffolding Couplers and accessories |
AS 2468-1989 | Steel cylinders for compressed gases - Brazed - 0.1 kg to 11 kg |
AS/NZS 2041:1998 | Buried corrugated metal structures |
AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 2304-2011 | Water storage tanks for fire protection systems |
AS 1788.1-1987 | Abrasive wheels Design, construction, and safeguarding |
AS/NZS 1554.1:2011 | Structural steel welding Welding of steel structures |
AS/NZS 5100.6:2017 | Bridge design Steel and composite construction |
AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
AS/NZS 4994.1:2009 | Temporary edge protection General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.