• There are no items in your cart

EN ISO 12100-1:2003/A1:2009

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY

Superseded date

11-01-2010

Published date

01-12-2013

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards to be taken into account when designing machinery
5 Strategy for risk reduction
Annex A (informative) - Schematic representation of a machine
Trilingual index
Bibliography
Annex ZA (informative) - Equivalence between the ISO
                         standards and the European standards
Annex ZB (informative) - Relationship between this
                         International Standard and the
                         Essential Requirements of EU
                         Directive 98/37/EC
Annex ZC (informative) - Relationship between this
                         International Standard and the
                         Essential Requirements of EU
                         Directive 2006/42/EC

Describes basic terminology and methodology used in achieving safety of machinery.

Committee
TC 114
DevelopmentNote
Supersedes EN 292-1. (11/2003)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy
Supersedes

I.S. EN 15997:2011 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
NF EN 50348 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
CEI CLC/TS 62046 : 2011 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
04/101637 DC : DRAFT JAN 2004 ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
11/30236563 DC : 0 BS EN 16228-4 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 4: FOUNDATION EQUIPMENT
PREN 957-6 : DRAFT 2009 STATIONARY TRAINING EQUIPMENT - PART 6: TREADMILLS, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
PREN 1808 : DRAFT 2011 SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
BS EN 15895 : 2011 CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
I.S. EN 12312-8:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
11/30236570 DC : 0 BS EN 16228-6 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
04/30116573 DC : 0 EN 15000 - SPECIFICATION FOR LONGITUDINAL LOAD MOMENT LIMITERS FOR VARIABLE REACH TRUCKS
DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
DIN EN 15162:2008-10 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
DIN EN 15164 E : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
09/30179854 DC : 0 BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
BS EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
CEI EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
07/30163048 DC : 0 BS EN 12882 - CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS
07/30172830 DC : DRAFT DEC 2007 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
DIN EN 15573 E : 2009 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
BS EN 115-2:2010 Safety of escalators and moving walks Rules for the improvement of safety of existing escalators and moving walks
11/30236573 DC : 0 BS EN 16228-7 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 7: INTERCHANGEABLE AUXILIARY EQUIPMENT
08/30178378 DC : 0 BS EN 1218-3:2001/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
BS EN 81-31:2010 Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts
DIN EN 15166:2010-02 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
14/30303750 DC : 0 BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
BS EN 1829-1:2010 High pressure water jet machines. Safety requirements Machines
BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
DIN EN 16297-1 E : 2013 PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
I.S. EN 13411-8:2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
07/30158774 DC : 0 BS EN 791 AMD1 - DRILL RIGS - SAFETY
04/30115525 DC : DRAFT JUN 2004 PREN 12312-14 - AIRCRAFT GROUND SUPPORT EQUIPMENT - PART 14: DISABLED INCAPACITATED PASSENGER BOARDING EQUIPMENT
10/30228230 DC : 0 BS EN 13001-2 - CRANES - GENERAL DESIGN - PART 2: LOAD ACTIONS
11/30244210 DC : 0 BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
05/30131998 DC : 0 BS EN 15180 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 957-5:2009 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
10/30215039 DC : 0 BS EN 690 - AGRICULTURAL MACHINERY - MANURE SPREADERS - SAFETY
09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
07/30172833 DC : DRAFT DEC 2007 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 15714-4 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS EN 15997:2011 All terrain vehicles (ATVs - Quads). Safety requirements and test methods
BS EN 15573:2008 Earth-moving machinery. Design requirements for circulation on the road
08/30174125 DC : DRAFT SEP 2008 BS EN 12312-2 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
BS EN 50338:2006 Safety of household and similar electrical appliances. Particular requirements for pedestrian-controlled battery powered electrical lawnmowers
EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
08/30182278 DC : 0 BS EN 1547:2001/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
09/30205068 DC : 0 BS EN 1151-1 - PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: GENERAL REQUIREMENTS, TESTING, MARKING
UNI EN 13237 : 2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 14958:2010-10 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009)
08/30174128 DC : DRAFT SEP 2008 BS EN 12312-3 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES
05/30134150 DC : DRAFT MAY 2005 EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 13035-6 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
11/30237569 DC : 0 BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
I.S. EN 16230-1:2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
09/30179845 DC : 0 BS EN 13112:2002/A1 - TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY
BS EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory
DIN EN 15093:2009-06 Safety of machinery - Safety requirements for hot flat rolling mills
05/30130669 DC : DRAFT MAR 2005 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15848:2010 Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing
DIN EN 894-4:2010-11 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
08/30182206 DC : DRAFT SEP 2008 BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY
09/30202535 DC : DRAFT JUN 2009 BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
09/30197984 DC : 0 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
12/30271353 DC : 0 BS EN 60335-2-8:2003/AB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
09/30202029 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
08/30174131 DC : DRAFT SEP 2008 BS EN 12312-4 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES
UNE-EN 13684:2005 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
BS EN 13035-11 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
10/30185766 DC : 0 BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
08/30177210 DC : DRAFT MAY 2008 BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
UNI EN 12012-4 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
04/30111616 DC : 0 EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
UNI EN 81-40 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
I.S. EN 15429-2:2012 SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
UNI EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
08/30182212 DC : DRAFT SEP 2008 BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY
08/30173506 DC : DRAFT JAN 2008 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
NF EN 13035-5 : 2006 + A1 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
04/30126149 DC : 0 EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY
DIN EN 15774:2011-10 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
DIN EN 14886 E : 2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
EN 703:2004+A1:2009 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety
DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 81-31:2010-08 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN 81-41:2010 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
I.S. EN 12649:2008 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
PREN 1870-12 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
S.R. CEN TS 13001-3-5:2010 CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS
BS EN 15746-1 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
DIN EN 81-21:2016-01 (Draft) SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS
I.S. CLC TS 62046:2005 SAFETY OF MACHINERY- APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
I.S. EN 1829-1:2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
BS EN 16230-1 : 2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
I.S. EN 13000:2010 Cranes - Mobile cranes
I.S. EN 15714-2:2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
UNI EN 15573 : 2009 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
I.S. EN 1501-3:2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
I.S. EN 15061:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNE-EN 15429-2:2013 Sweepers - Part 2: Performance requirements and test methods
UNE-EN 15997:2013 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods
PREN 378-1 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
NF EN 1175-1 : 1998 + A1 2011 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
DIN EN 1374:2011-01 Agricultural machinery - Silos stationary unloaders for round silos - Safety (includes Amendment A1:2010)
DIN EN 1672-2:2009-07 Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009)
I.S. EN 1114-3:2001 RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 1804-3:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems (includes Amendment A1:2010)
DIN EN 12409:2011-12 Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN 14910 E : 2009 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
DIN EN 415-7:2009-12 Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 13135-1:2011-04 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
DIN EN 415-5:2010-04 Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN 13288:2010-10 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 13525:2010-05 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
DIN EN 14238 E : 2010 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 746-3:2010-02 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (includes Amendment A1:2009)
DIN EN 12852:2011-02 Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
DIN EN 12653:2010-06 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009)
DIN EN 1005-5:2007-05 Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency
DIN EN 13683:2013-08 Garden equipment - Integrally powered shredders/chippers - Safety
DIN EN 13675:2010-10 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010)
DIN EN 500-6:2009-05 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS
DIN EN 13019:2009-04 Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008)
DIN EN 13591:2010-10 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 500-1:2010-05 Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009)
DIN EN 1756-2:2009-12 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers (includes Amendment A1:2009)
DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 1760-3:2009-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN 13570:2011-02 Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12921-4:2010-06 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents (includes Amendment A1:2008)
DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
BS EN 12203 : 2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
BS EN 500-6 : 2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS
BS EN 13457 : 2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 14018 : 2005 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
BS EN 1612-1 : 1997 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
BS EN 14466 : 2005 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
BS EN 710 : 1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
BS EN 13035-3 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
BS EN 1093-3 : 2006 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
BS EN 1493:2010 Vehicle lifts
BS EN 13042-3 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
BS EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
BS EN 13731:2007 Lifting bag systems for fire and rescue service use. Safety and peformance requirements
UNE-EN 13977:2012 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 12855 : 2003 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13954 : 2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1398:2009 Dock levellers. Safety requirements
BS EN 474-7 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
BS EN 12852 : 2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 818-3 : 1999 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
BS EN 1974 : 1998 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1005-4 : 2005 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
BS EN 12984 : 2005 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1837 : 1999 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
BS EN 618 : 2002
BS EN 953 : 1998 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
BS EN 13531 : 2001 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
BS EN 12629-6 : 2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS
BS EN 12312-18 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
BS EN 474-8 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS
BS EN 1374 : 2000 AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
BS EN 12921-2 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS
BS EN 13000 : 2010 CRANES - MOBILE CRANES
BS EN 12629-3 : 2002 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
DIN EN 13042-1:2010-04 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
BS EN 14861 : 2004 FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
BS EN 12629-7 : 2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
BS EN 1679-1 : 1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS EN 12622 : 2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
BS EN 474-4 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
BS EN 614-1 : 2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
BS EN 528:2008 Rail dependent storage and retrieval equipment. Safety requirements
BS EN 13886 : 2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13042-2:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (includes Amendment A1:2009)
BS EN 12409 : 2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 12853 : 2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12418 : 2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
BS EN 15067:2007 Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 1034-1 : 2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS
BS EN 12387 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
BS EN 1678 : 1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements
EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements
I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
I.S. EN 12312-13:2017 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 13: LAVATORY SERVICE EQUIPMENT
I.S. EN 12921-4:2005 MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS AND VAPOURS - PART 4: SAFETY OF MACHINES USING HALOGENATED SOLVENTS
I.S. EN 12629-4:2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES
I.S. EN 528:2008 RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 14812:2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN 13977:2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN 12601:2011-07 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
DIN EN 12851:2010-10 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12629-5-3:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-3: PIPE PRESTRESSING MACHINES
UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 14010:2004
EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements
I.S. EN 13570:2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14910:2007 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
I.S. EN 13367:2005 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
I.S. EN 12629-8:2003 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 8: MACHINES AND EQUIPMENT FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CALCIUM-SILICATE (AND CONCRETE)
DIN EN 1570:1998-08 SAFETY REQUIREMENTS FOR LIFTING TABLES
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
UNI EN 703 : 2010 AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
DIN EN 15067:2008-03 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
DIN EN 818-1:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety
DIN EN 12312-4:2003-09 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES
EN 1034-5:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles
EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
EN 60825-4:2006/A2:2011 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
DIN EN 13731:2008-02 Lifting bag systems for fire and rescue service use - Safety and performance requirements
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
EN 13157:2004+A1:2009 Cranes - Safety - Hand powered cranes
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
DIN EN 12312-5:2009-08 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009)
EN 1010-5:2005 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 12312-11:2005 Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers
EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
DIN EN 12312-3:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
DIN EN 14710-2:2009-06 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements (includes Amendment A2:2008)
EN 15997:2011/AC:2012 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements
DIN EN 1114-3:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
EN 16297-1:2012 Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
EN 50177:2009/A1:2012 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
UNE-EN 972:1999 TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS.
CEN/TS 13778:2004 Mobile demolition machinery - Safety requirements
EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements
EN 1034-6:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
DIN EN 1114-2:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene requirements
EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
EN 12312-19:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements
EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
UNI EN 13411-7 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
EN 12312-10:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
NF EN 201 : 2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene requirements
EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements
EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment
EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 12101-10:2005/AC:2007 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
DIN EN 81-21:2012-11 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS
EN 1093-3:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
EN 13021:2003+A1:2008 Winter service machines - Safety requirements
DIN EN ISO 12100-2:2004-04 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 61784-3-6:2010 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
CEN/TS 13001-3-1:2004/AC:2006 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
NF EN 1218-1 : 2000 + A1 2009 SAFETY OF WOOD WORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
EN 1114-2:1998+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 12312-18:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 12622:2009+A1:2013 Safety of machine tools - Hydraulic press brakes
EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines - Safety
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
EN 1034-13:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines
EN 50050:2006 Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment
EN 1034-7:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
UNI EN 1034-1 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
EN 1005-5:2007 Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements
EN 1034-2:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines
EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 13531:2001+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)
DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN ISO 20643:2008/A1:2012 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
ONORM EN 1756-1 : 2008 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
I.S. EN 1501-4:2007 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 4: NOISE TEST CODE FOR REFUSE COLLECTION VEHICLES
DIN EN 1501-3:2010-06 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
UNI EN 13155 : 2009 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
11/30246684 DC : 0 BS EN 1953 - ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
09/30178310 DC : DRAFT FEB 2009 BS EN 1807:1999/A1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 15429-2 E : 2013 SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 12012-1:2015-05 (Draft) PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
11/30245021 DC : 0 BS EN 16297-1 - PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
11/30237566 DC : 0 BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
09/30181661 DC : 0 BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
11/30241848 DC : 0 BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
07/30165769 DC : 0 BS EN 1093-1 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
11/30235004 DC : 0 BS EN 13155 - CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
DIN EN 13035-5 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
07/30161753 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
08/30177207 DC : DRAFT MAY 2008 BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
BS EN 81-41:2010 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility
11/30244198 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
04/19993045 DC : 0 EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
FD S61 508 : 2010 FD FIREFIGHTING AND RESCUE SERVICE VEHICLES - APPLICATION GUIDE OF NF EN 1846-2:2009
BS EN 15774:2010 Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements
DIN EN 81-43:2010-05 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
UNI EN 13035-5 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
BS EN 60335-2-77:2010 Safety of household and similar appliances Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
BS EN 81-43:2009 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
08/30174158 DC : DRAFT SEP 2008 BS EN 12312-13 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 13: LAVATORY SERVICE EQUIPMENT
09/30173298 DC : 0 BS EN 81-21 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDINGS
06/30156009 DC : DRAFT SEP 2006 BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES
06/30118768 DC : 0 EN 1398 - DOCK LEVELLERS
09/30211248 DC : 0 BS EN 16029 - RIDE-ON, MOTORIZED VEHICLES INTENDED FOR THE TRANSPORTATION OF PERSONS AND NOT INTENDED FOR USE ON PUBLIC ROADS - SAFETY REQUIREMENTS - SINGLE-TRACK TWO-WHEEL MOTOR VEHICLES
UNI EN 13035-11 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
06/30156494 DC : 0 BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
I.S. EN 1010-5:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD
UNI EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
08/30175222 DC : DRAFT SEP 2008 BS EN 12312-1 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS
ONORM EN 1672-2 : 2009 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
09/30198762 DC : 0 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
DIN EN 12312-8:2015-07 (Draft) AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
08/30180312 DC : DRAFT MAR 2008 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
DIN EN ISO 13732-3:2008-12 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 3: COLD SURFACES
11/30237557 DC : 0 BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS EN 61310-2:2008 Safety of machinery. Indication, marking and actuation Requirements for marking
12/30232434 DC : 0 BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
13/30291771 DC : DRAFT DEC 2013 BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
11/30240510 DC : 0 BS EN 12312-2 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 2: CATERING VEHICLES
09/30176076 DC : DRAFT JAN 2009 BS EN 280:2001/A2 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
08/30174164 DC : DRAFT SEP 2008 BS EN 12312-17 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT
I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
08/30174155 DC : DRAFT SEP 2008 BS EN 12312-12 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 12: POTABLE WATER SERVICE EQUIPMENT
DIN EN 14958 E : 2010 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15164:2008-09 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
10/30230365 DC : 0 BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
PREN 1870-11 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
PREN 13411-4 : DRAFT 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
BS EN 15000:2008 Safety of industrial trucks. Self propelled variable reach trucks. Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
PREN 1889-1 : DRAFT 2010 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
DIN EN 16297-1:2013-04 PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
11/30235009 DC : 0 BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
PREN 1953 : DRAFT 2011 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 1829-2 : 2008 HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS
11/30240323 DC : 0 BS EN 16252 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
09/30178325 DC : DRAFT FEB 2009 BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DD CEN/TS 13001-3-1 : 2004 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
09/30207016 DC : 0 BS EN 60335-2-75:2004/PRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
08/30176079 DC : 0 BS EN 1570:1998+A2 - SAFETY REQUIREMENTS FOR LIFTING TABLES
08/30177213 DC : DRAFT JUNE 2008 BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
11/30244804 DC : 0 BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
12/30261638 DC : 0 BS EN 13001-2 - CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS
11/30244502 DC : 0 BS EN 81-77 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATIONS OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOOD PASSENGERS LIFTS - PART 77: LIFTS SUBJECT TO SEISMIC CONDITIONS
DIN EN 1829-1:2010-05 High pressure water jet machines - Safety requirements - Part 1: Machines
09/30181664 DC : 0 BS EN 13035-4:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
11/30234386 DC : 0 BS EN 1808 - SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
08/30175637 DC : DRAFT MAR 2008 BS EN 15774 - FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
08/30187719 DC : 0 BS EN 1493 - VEHICLE LIFTS
BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
09/30180290 DC : 0 BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
CEI EN 61784-3-6 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
BS EN 13411-8:2011 Terminations for steel wire ropes. Safety Swage terminals and swaging
07/30161919 DC : 0 EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
09/30178346 DC : 0 BS EN 1870-12:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
09/30201429 DC : 0 BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS
09/30183457 DC : 0 BS EN 13020:2004/A1 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
UNE-EN 13411-8:2012 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging
04/30124285 DC : 0 EN 15059 - SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
09/30202538 DC : DRAFT JUN 2009 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
09/30201995 DC : 0 BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
09/30192761 DC : 0 BS EN 115-2 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
10/30211242 DC : 0 BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
PREN 12312-4 : DRAFT 2011 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES
09/30178328 DC : 0 BS EN 1870-6:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
09/30198357 DC : 0 BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
05/19981971 DC : 0 BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
PREN 13001-2 : DRAFT 2012 CRANE SAFETY - GENERAL DESIGN - PART 2: LOAD ACTIONS
09/30202310 DC : 0 BS EN 12514-2 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
DIN EN 13035-7:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009)
BS EN 913:2008 Gymnastic equipment. General safety requirements and test methods
DIN EN 15997:2012-10 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 13035-1 E : 2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
UNI EN 81-21 : 2012 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILDING
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 15164:2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
S.R. CEN TS 13001-3-2:2008 CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
BS EN 50177 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 15268 : 2009 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
I.S. EN 50050:2006 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
I.S. EN 913:2008 GYMNASTICS EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
BS EN 15061 : 2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
BS EN 13035-5 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
BS EN 60335-2-8 : 2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHAVERS, HAIR CLIPPERS AND SIMILAR APPLIANCES
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ONORM EN 913 : 2009 GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 81-40:2009-04 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
PREN 12601 : DRAFT 2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
I.S. EN 13035-1:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
UNI EN 115-2 : 2010 SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
I.S. EN 50177:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
UNI EN 81-71 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER LIFTS AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS
NF EN 13684 : 2004 + A3 2010
CLC/TR 50488:2006 Railway applications - Safety measures for the personnel working on or near overhead contact lines
BS EN 474-1:2006+A6:2019 Earth-moving machinery. Safety General requirements
UNI EN 81-43 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES
BS EN 12312-8 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
UNI EN 15774 : 2011 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12012-1 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
I.S. EN 60204-32:2008 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
NF EN 1501-2 : 2005 + A1 2010 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
NF EN 1673 : 2000 + A1 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15268:2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
DIN EN 1837:2009-12 Safety of machinery - Integral lighting of machines (includes Amendment A1:2009)
S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 1494:2009-05 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
DIN EN 1398:2009-07 DOCK LEVELLERS - SAFETY REQUIREMENTS
DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 1678:2011-02 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 746-1:2010-02 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
DIN EN 12387:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 12267:2011-02 Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12312-17:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT
DIN EN 1034-22:2010-06 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood grinders (includes Amendment A1:2009)
DIN EN 1777:2010-06 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
DIN EN 13000:2014-11 CRANES - MOBILE CRANES
DIN EN 1807:2010-02 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13114:2010-03 Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 13021:2009-04 Winter service machines - Safety requirements (includes Amendment A1:2008)
DIN EN 1493:2011-02 Vehicle lifts
DIN EN 1915-3:2009-06 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION
DIN EN 12312-3 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 3: CONVEYOR BELT VEHICLES
DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12312-1 E : 2001 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS
DIN EN 12203:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
DIN EN 13411-7 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
DIN EN 12984:2011-02 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13112:2011-03 Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN 1012-1:2011-02 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
DIN EN 12855:2011-02 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12301:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 1756-1:2008-10 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods (includes Amendment A1:2008)
DIN EN 1547:2010-02 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009)
DIN EN 12525:2011-02 Agricultural machinery - Front loaders - Safety (includes Amendment A2:2010)
DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12312-16:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13102:2009-05 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
DIN EN 14957 E : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12312-6 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
DIN EN 12312-15:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS
DIN EN 12312-10:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 10: CONTAINER/PALLET TRANSFER TRANSPORTERS
DIN EN 1974:2016-06 (Draft) Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016
DIN EN 12418:2010-03 Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009)
DIN EN 1265:2009-07 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 1218-1:2010-02 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
DIN EN 13157:2010-07 Cranes - Safety - Hand powered cranes (includes Amendment A1:2009)
DIN EN 15027 E : 2010 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
DIN EN 620:2011-07 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010)
DIN EN 14010:2009-12 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009)
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN 15233:2007-11 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
DIN EN 14502-2:2009-05 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
DIN EN 14466:2008-09 FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN 869:2009-12 Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009)
DIN EN 14710-2 E : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
DIN EN 15027:2010-03 Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009)
DIN EN 15198 E : 2007 METHODOLOGY FOR THE RISK ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 474-10:2010-04 Earth-moving machinery - Safety - Part 10: Requirements for trenchers (includes Amendment A1:2009)
DIN EN 474-4:2012-05 Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders (includes Amendment A2:2012)
DIN EN 14439:2010-03 Cranes - Safety - Tower cranes (includes Amendment A2:2009)
DIN EN 14910:2009-08 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
DIN EN 13042-1 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
DIN EN 13042-5 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS -SAFETY REQUIREMENTS - PART 5: PRESSES
DIN EN 474-8:2010-05 Earth-moving machinery - Safety - Part 8: Requirements for graders (includes Amendment A1:2009)
DIN EN 14655:2010-11 Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12044:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009)
DIN EN 12312-7:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIRCRAFT MOVEMENT EQUIPMENT
DIN EN 13035-4:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009)
DIN EN 13035-9:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010)
DIN EN 13042-3:2010-05 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
DIN EN 14238:2010-02 Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009)
DIN EN 13035-3:2010-02 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 14656:2010-10 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
BS EN 1501-2 : 2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
BS EN 15056 : 2006 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
UNE-EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply
BS EN 13570 : 2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14238 : 2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
BS EN 1175-1 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 474-9 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
BS EN 1034-14 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
BS EN 1760-3 : 2004 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 1175-3 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
BS EN 12653 : 2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
BS EN 14812 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
UNE-EN 1493:2011 Vehicle lifts
UNE-EN 1374:2001 Agricultural machinery. Silos stationary unloaders for round silos. Safety.
BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
UNE-EN 1777:2011 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
BS EN 14673 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 13534 : 2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
BS EN 620 : 2002
BS EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety
BS EN 836 : 1997 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
UNE-EN 13135-2:2005 Cranes - Equipment - Part 2: Non-electrotechnical equipment
I.S. EN 12855:2003 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
DIN EN 1915-1:2001-06 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 1034-2:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
I.S. EN 619:2002
I.S. EN 12418:2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
I.S. EN 13114:2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
I.S. EN 12312-20:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
I.S. EN 12203:2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
I.S. EN 869:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
I.S. EN 13042-2:2004 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
I.S. EN 12158-2:2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
I.S. EN 1248:2001 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
DIN EN 12312-4 E : 2003 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES
I.S. EN 14656:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN 1012-1:2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
I.S. EN 13035-9:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
UNI EN 1804-3 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
I.S. EN ISO 20643:2008 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
I.S. EN 1679-1:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 1804-3:2006 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
I.S. EN 13954:2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13309:2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
I.S. EN 1915-2:2001 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 2: STABILITY AND STRENGTH REQUIREMENTS, CALCULATIONS AND TEST METHODS
I.S. EN 1175-2:1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
I.S. EN 12629-6:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS
DIN EN 1248:2010-06 Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009)
I.S. EN 15056:2006 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
I.S. EN 13288:2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13237:2012 POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 12622:2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
I.S. EN 13042-5:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
I.S. EN 1846-2:2009 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 13885:2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-13:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
I.S. EN 13113:2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
I.S. EN 12629-2:2003 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12267:2003 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 474-3:2006 EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
DIN EN 1870-1:1999-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN 14439:2006 CRANES - SAFETY - TOWER CRANES
DIN EN 1570:2009-12 SAFETY REQUIREMENTS FOR LIFTING TABLES
I.S. EN 14238:2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
I.S. EN 474-10:2006 EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
I.S. EN 1494:2000 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
DIN EN 1218-3:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1034-22:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
I.S. EN 422:2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13042-1:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
I.S. EN 500-3:2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES
I.S. EN 13886:2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
I.S. EN 13621:2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 474-2:2008 EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS
DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN 1093-1:2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
I.S. EN 614-1:2006 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 13035-4:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
I.S. EN 1034-4:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
I.S. EN 13534:2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14957:2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-6:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
I.S. EN 1265:2000 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
I.S. EN 13208:2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14658:2005 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
I.S. EN 746-2:2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 818-3:1999 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
I.S. EN 13102:2006 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
I.S. EN 12409:2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
I.S. EN 12312-17:2004 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT
I.S. EN 12044:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
I.S. EN 474-8:2006 EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS
DIN EN 1974:2010-05 Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009)
I.S. EN 1915-3:2004 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION
I.S. EN 60825-4:2006 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
I.S. EN 12629-1:2000 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 1974 : 2009 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13683:2003 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
I.S. EN 13035-3:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
I.S. EN 12505:2000 FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 12312-10:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 10: CONTAINER/PALLET TRANSFER TRANSPORTERS
I.S. EN 12921-3:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
I.S. EN 1915-4:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
I.S. EN 13157:2004 CRANES - SAFETY - HAND POWERED CRANES
I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 13135-1:2004-05 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
UNI EN 1672-2 : 2009 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
DIN EN 1807:1999-10 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 1459:2012-06 SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS
I.S. EN 14502-2:2005 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
I.S. EN 474-11:2006 EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN 1034-1:2010-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 13463-1:2009-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
I.S. EN 13531:2001 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
DIN EN 1760-1:1997-09 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
I.S. EN 1837:1999 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
DIN EN 1034-7:2010-06 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009)
I.S. EN 12355:2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1612-2:2000 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
I.S. EN 500-2:2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES
I.S. EN 12629-5-1:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-1: PIPE MAKING MACHINES MANUFACTURING IN THE VERTICAL AXIS
I.S. EN 1218-3:2002 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1034-5:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
I.S. EN 1547:2001 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
I.S. EN 12525:2000 AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY
I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 500-1:2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 930:1998 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12852:2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13675:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
I.S. EN 1034-1:2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 474-12:2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
I.S. EN 1493:2010 VEHICLE LIFTS
I.S. EN 818-6:2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
I.S. EN 703:2004 AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
I.S. EN 12629-3:2002 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
I.S. EN 818-1:1996 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
I.S. EN 617:2001
I.S. EN 474-5:2006 EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS
I.S. EN 1034-7:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
I.S. EN 931:1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 12851:2006 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13591:2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-14:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
I.S. EN 12629-5-2:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-2: PIPE MAKING MACHINES MANUFACTURING IN THE HORIZONTAL AXIS
EN 710:1997+A1:2010/AC:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
I.S. EN 12629-5-4:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-4: CONCRETE PIPE COATING MACHINES
I.S. EN 201:2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12312-5:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
I.S. EN 14466:2005 FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
I.S. EN 1777:2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
I.S. EN 12984:2006 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1175-3:1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
I.S. EN 12012-3:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
I.S. EN 12653:2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14710-1:2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
I.S. EN 1672-2:2005 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - HYGIENE REQUIREMENTS
EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
I.S. EN 13042-3:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
I.S. EN 15027:2007 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
DIN EN 818-3:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14018:2005 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
I.S. EN 13019:2001 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 1218-1:2000 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
DIN EN 1034-5:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009)
I.S. EN 12853:2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 818-5:1999 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
UNI EN 15746-1 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
I.S. EN 1247:2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
I.S. EN 415-5:2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 12921-2:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS
I.S. EN 741:2000 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
I.S. EN 12312-16:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT
EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems
I.S. EN 1398:2009 DOCK LEVELLERS - SAFETY REQUIREMENTS
I.S. EN 13411-7:2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
I.S. EN 1114-2:1998 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
I.S. EN 474-9:2006 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
I.S. EN 12854:2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 818-4:1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
I.S. EN 14673:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
I.S. EN 746-3:1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
I.S. EN 13112:2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN 1034-4:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009)
I.S. EN 972:1998 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
I.S. EN 1756-1:2002 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
I.S. EN 12312-18:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
I.S. EN 12312-19:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS, AXLE JACKS AND HYDRAULIC TAIL STANCHIONS
I.S. EN 14655:2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12387:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 14930:2007 AGRICULTURAL AND FORESTRY MACHINERY AND GARDENING EQUIPMENT - PEDESTRIAN CONTROLLED AND HAND-HELD MACHINES - DETERMINATION OF ACCESSIBILITY OF HOT SURFACES
DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
DIN EN 1034-6:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009)
I.S. EN 500-6:2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS
I.S. EN 14710-2:2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
I.S. EN 13021:2003 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
DIN EN 957-1:1999-02 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1845:2008-06 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
I.S. EN 710:1998 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
I.S. EN 1093-2:2006 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 2: TRACER GAS METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
I.S. EN 618:2002
I.S. EN 474-6:2006 EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS
I.S. EN 1175-1:1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
I.S. EN 1678:1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1845:2007 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 620:2002
I.S. EN 1374:2000 AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
UNI EN 1837 : 2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
I.S. EN 1093-3:2006 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
I.S. EN 818-2:1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
I.S. EN 474-4:2006 EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
I.S. EN 474-7:2006 EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
I.S. EN 1495:1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
DIN EN 1760-2:2001-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
I.S. EN 13457:2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN 1501-2:2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
I.S. EN 1756-2:2004 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
I.S. EN 13390:2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12629-7:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
DIN EN 1034-2:2010-09 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009)
I.S. EN 1974:1998 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 415-7:2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
DIN EN 12336:2010-03 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 13155:2003 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
I.S. EN 1550:1998 MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
UNI EN 474-8 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS
UNI EN ISO 13732-3 : 2009 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 3: COLD SURFACES
UNI EN 12387 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13390 : 2010 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14658 : 2010 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
NF EN 12355 : 2003 + A1 2010 FOOD PROCESSING MACHINERY - DERIDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
NF EN 619 : 2003 + A1 2010
VDI 3678 Blatt 2:2010-12 Electrostatic precipitators - Process air and indoor air cleaning
VDI 2064:2010-11 Active vibration isolation
VDI 2700 Blatt 13:2010-05 Securing of loads on road vehicles - Oversized and heavy load transportation
ONORM EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
VDI 4499 Blatt 4:2015-03 Digital factory - Ergonomic representation of humans in the digital factory
NF EN 13885 : 2005 + A1 2010 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
VDI 3476 Blatt 2:2010-01 Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes
VDI 4500 Blatt 2:2006-11 Technical documentation - Organization and management
NF EN 474-4 : 1996 + A2 2012 EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
I.S. EN 14017:2005 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
CEI EN 50110-1 : 2014 OPERATION OF ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
UNI EN 13684 : 2010 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
DIN EN 13035-5:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (includes Amendment A1:2009)
UNI CEN/TS 13001-3-2 : 2008 CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
I.S. EN 13035-2:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
DIN EN 15573:2009-09 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
I.S. EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
12/30241468 DC : 0 BS EN 16507 - RAILWAY APPLICATIONS - GROUND BASED SERVICE - DIESEL REFUELLING EQUIPMENT
DIN EN 13035-7 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
NF EN 894-4 : 2010 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN 1151-1:2006 PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: NON-AUTOMATIC CIRCULATION PUMPS, REQUIREMENTS, TESTING, MARKING
I.S. EN 957-10:2005 STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
BS EN 16297-1:2012 Pumps. Rotodynamic pumps. Glandless circulators. General requirements and procedures for testing and calculation of energy efficiency index (EEI)
11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
I.S. EN 957-1:2005 STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
11/30237560 DC : 0 BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
14/30303762 DC : 0 BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
08/30174149 DC : DRAFT SEP 2008 BS EN 12312-6 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT
08/30173038 DC : DRAFT JAN 2008 BS EN 422 - PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
PREN 1493 : DRAFT 2008 VEHICLE LIFTS
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
07/30166811 DC : 0 BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
12/30261722 DC : DRAFT MAR 2012 BS EN 60335-2-86 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY
BS EN 15162:2008 Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
09/30201246 DC : 0 BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT
09/30175678 DC : 0 BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 13411-8:2011-12 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging; German version EN 13411-8:2011
09/30181658 DC : DRAFT JAN 2009 BS EN 13157 AMD1 - CRANES - SAFETY - HAND POWERED LIFTING EQUIPMENT
10/30232428 DC : DRAFT DEC 2010 BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
09/30194890 DC : 0 BS EN 13135-1:2003/A1 - CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
DD CEN/TS 13778:2005 Mobile demolition machinery. Safety requirements
DIN EN 15061:2009-05 Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
10/30233212 DC : 0 BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN 15164:2008 Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
04/30058509 DC : DRAFT JUNE 2004 BS EN 14985 - CRANES - SLEWING JIB CRANES
NF EN 15746-1 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
UNE-EN 60335-2-77:2011 Safety of household and similar appliances -- Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers
14/30303756 DC : 0 BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS; DESIGN AND SAFETY REQUIREMENTS
10/30232425 DC : DRAFT DEC 2010 BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
BS EN 1010-2 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
10/30232431 DC : DRAFT DEC 2010 BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
BS EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory
12/30259188 DC : 0 BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
05/30129947 DC : 0 EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
09/30178337 DC : 0 BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
09/30182302 DC : 0 BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 894-4 E : 2010 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
BS EN 415-8:2008 Safety of packaging machines Strapping machines
09/30181706 DC : 0 BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DD CLC/TS 62046:2008 Safety of machinery. Application of protective equipment to detect the presence of persons
09/30177494 DC : DRAFT JAN 2009 BS EN 14238 AMD1 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
05/30129943 DC : 0 EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
DIN EN 15000:2009-06 SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
09/30178369 DC : DRAFT JAN 2009 BS EN 940 AMD1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
08/30176097 DC : 0
05/30130673 DC : DRAFT MAR 2005 BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
04/30126355 DC : DRAFT DEC 2004 ISO 20361 - LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
11/30237563 DC : 0 BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 50176:2010 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
BS EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements
I.S. CEN TS 13001-3-2:2005 CRANES - GENERAL DESIGN - PART 3-2: LIMIT STATES AND PROOF OF COMPETENCE OF WIRE ROPES IN REEVING SYSTEMS
DIN EN 15268 E : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
BS EN 15714-2:2009 Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements
DIN EN 15094:2009-04 Safety of machinery - Safety requirements for cold flat rolling mills
10/30214958 DC : 0 BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
08/30174113 DC : DRAFT AUG 2008 BS EN 1915-4 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
BS EN 15094:2008 Safety of machinery. Safety requirements for cold flat rolling mills
07/30165571 DC : 0 BS EN 957-5 - STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
UNI CEN/TS 13001-3-1 : 2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
UNI EN 14753 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
05/19981967 DC : 0 BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS
BS EN 61310-3:2008 Safety of machinery. Indication, marking and actuation Requirements for the location and operation of actuators
05/30133333 DC : DRAFT MAY 2005 EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
08/30183861 DC : DRAFT SEP 2008 BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
UNI EN 15895 : 2011 CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
09/30182215 DC : 0 BS EN 12001:2003/A1 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
09/30178343 DC : 0 BS EN 1870-11:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
05/30131803 DC : DRAFT APR 2005 EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
05/30138432 DC : DRAFT AUG 2005 BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
I.S. CEN TS 13778:2004 MOBILE DEMOLITION MACHINERY - SAFETY REQUIREMENTS
BS EN 60335-2.77 : 2010 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 1870-6:2003 Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
I.S. CEN TS 13001-3-1:2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
BS EN 14958 : 2006 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14958:2006 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
I.S. EN 61784-3-6:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 13684:2004 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
I.S. EN 81-41:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
NF EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
I.S. EN 50348:2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 81-40:2008 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
UNI EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
UNE-EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
DIN EN 13684:2015-05 (Draft) GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
PREN 1870-10 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 13035-7 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
DIN EN 12629-6:2011-02 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products (includes Amendment A1:2010)
I.S. EN 15162:2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
I.S. EN 12301:2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 15000:2008 SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
I.S. EN 61310-2:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS EN 13684 : 2004 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
I.S. EN 14886:2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
I.S. EN 60204-1:2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 1005-4:2009-01 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
NF EN 12312-7 : 2006 + A1 2010 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT
DIN EN 1247:2010-12 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010)
UNI EN 1501-2 : 2010 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN 12312-20:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
DIN EN 13208:2011-02 Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12853:2012-02 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12355:2011-02 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12622:2014-02 Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
DIN EN 12649:2011-09 Concrete compactors and smoothing machines - Safety
DIN EN 12505:2010-11 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 12312-8 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 8: MAINTENANCE STAIRS AND PLATFORMS
DIN EN 12312-7 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT
DIN EN 1915-4:2009-06 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
DIN EN 12312-11:2005-06 Aircraft ground support equipment - Specific requirements - Part 11: Container/Pallet dollies and loose load trailers
DIN EN 14930 E : 2009 AGRICULTURAL AND FORESTRY MACHINERY AND GARDENING EQUIPMENT - PEDESTRIAN CONTROLLED AND HAND-HELD MACHINES - DETERMINATION OF ACCESSIBILITY OF HOT SURFACES
DIN EN 1679-1:2011-09 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
DIN EN ISO 20643 E : 2012 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005 + AMD 1:2012)
DIN EN 12854:2010-12 Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12312-5 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 12158-2:2011-04 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010)
DIN EN 13155:2009-08 Cranes - Safety - Non-fixed load lifting attachments (includes Amendment A2:2009)
DIN EN 1034-13:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009)
NF EN 1837 : 1999 + A1 2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
DIN EN 13113:2011-05 Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN 13035-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 818-2:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
DIN EN 818-5:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
DIN EN 13035-9 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
DIN EN 13954:2010-12 Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 692:2009-10 Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
DIN EN 474-9:2010-04 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers (includes Amendment A1:2009)
DIN EN 703:2009-12 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety (includes Amendment A1:2009)
DIN EN 474-2:2010-02 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers (includes Amendment A1:2008)
DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 474-11:2010-05 Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors (includes Amendment A1:2008)
DIN EN 957-10:2005-10 STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 14017:2009-07 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
DIN EN 422:2009-10 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 930:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009)
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 12629-1:2011-01 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010)
UNE-EN 710:1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT.
DIN EN 14018:2010-02 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
DIN EN 13885:2011-02 Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 15067 E : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
DIN EN 931:2010-07 Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009)
DIN EN 14655 E : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14466 E : 2008 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN 14812 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 741:2011-06 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (includes Amendment A1:2010)
DIN EN 14658:2010-06 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining (includes Amendment A1:2010)
DIN EN 13042-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
DIN EN 14673:2010-10 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
BS EN 957-1:2005 Stationary training equipment General safety requirements and test methods
BS EN 12629-1 : 2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 12629-5-4 : 2003 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-4: CONCRETE PIPE COATING MACHINES
BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
BS EN 818-1 : 1996 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
BS EN 1114-2 : 1998 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
BS EN 12355 : 2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13135-2 : 2004 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
BS EN 746-1 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN 746-3 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 1034-5 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
BS EN 1495 : 1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
BS EN 13102 : 2005 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
BS EN 12921-3 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
09/30182290 DC : 0 BS EN 746-1:1997/A1 - INDUSTRIAL THERMO PROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMO PROCESSING EQUIPMENT
BS EN 12312-5 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 15233 E : 2007 METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 13042-2 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
DIN EN 14957:2010-11 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010)
BS EN 12505 : 2000 FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14930 : 2007 AGRICULTURAL AND FORESTRY MACHINERY AND GARDENING EQUIPMENT - PEDESTRIAN CONTROLLED AND HAND-HELD MACHINES - DETERMINATION OF ACCESSIBILITY OF HOT SURFACES
DIN EN 15198:2007-11 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements
BS EN 741 : 2000 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
BS EN 12649 : 2008 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
BS EN 1570 : 1999 SAFETY REQUIREMENTS FOR LIFTING TABLES
EN 913:2008 Gymnastic equipment - General safety requirements and test methods
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
I.S. EN 1005-4:2005 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
ONORM EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNE-EN 14861:2005 Forest machinery - Self propelled machinery - Safety requirements
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
UNI EN 13525 : 2010 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
EN 12312-7:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment
I.S. EN 12312-7:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT
UNE-EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
I.S. EN 1612-1:1998 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
DIN EN 957-5:2009-07 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
EN 474-4:2006+A2:2012 Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders
EN 15848:2010 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 1570:1998+A2:2009 Safety requirements for lifting tables
EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 12629-3 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
UNI EN 13042-2 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 818-1 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL CONDITIONS OF ACCEPTANCE
UNI EN 13035-9 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
UNI EN 1012-1 : 2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
UNI EN 1612-2 : 2008 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
UNI EN 1265 : 2009 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
UNI EN 13288 : 2010 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1005-4 : 2009 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
UNI EN 500-3 : 2009 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES
UNI EN 13035-4 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
UNI EN 1495 : 2009 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
UNI EN 1093-1 : 2009 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
UNI EN 13135-2 : 2010 CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
UNI EN 12581 : 2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 13683 : 2011 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
UNI EN 12629-5-4 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-4: CONCRETE PIPE COATING MACHINES
UNI EN 12629-5-3 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-3: PIPE PRESTRESSING MACHINES
UNI EN 12629-6 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS
UNI EN 14710-1 : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
UNI EN 14655 : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 818-4 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
UNI EN 13042-1 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
UNI EN 809 : 2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNI EN 619 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
UNI EN 1846-2 : 2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
UNI EN 1679-1 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
UNI EN 12203 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
UNI EN 500-2 : 2009 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES
UNI EN 15095 : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
UNI EN 14957 : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13113 : 2010 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNI EN 12854 : 2010 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1114-3 : 2009 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNI EN 14910 : 2010 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
UNI EN 474-7 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
UNI EN 972 : 2010 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
UNI EN 13621 : 2010 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1175-1 : 2010 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
UNI EN 474-12 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
UNI EN 13886 : 2010 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 614-1 : 2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
UNI EN 500-1 : 2010 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 13954 : 2010 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15027 : 2009 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
UNI EN 1114-2 : 2008 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
UNI EN 13208 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14017 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
UNI EN 13977 : 2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
UNI EN 1398 : 2009 DOCK LEVELLERS - SAFETY REQUIREMENTS
UNI EN 692 : 2009 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 1570 : 2009 SAFETY REQUIREMENTS FOR LIFTING TABLES
UNI EN 12921-2 : 2009 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS
UNI EN 1612-1 : 2008 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
UNI EN ISO 12100-2 : 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
UNI EN 13367 : 2009 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12921-4 : 2009 MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS AND VAPOURS - PART 4: SAFETY OF MACHINES USING HALOGENATED SOLVENTS
UNI EN 15067 : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
UNI EN 746-3 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
UNI EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 14673 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNI EN 617 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
UNI EN 1845 : 2008 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 474-11 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
UNI EN 13309 : 2010 CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
UNI EN 13035-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
UNI EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
UNI EN 12852 : 2010 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1010-2 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
UNI EN 13457 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 12267 : 2010 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15056 : 2009 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 12855 : 2010 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12649 : 2011 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNI EN 12653 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
UNI EN 953 : 2009 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
UNI EN 957-5 : 2009 STATIONARY TRAINING EQUIPMENT - PART 5: STATIONARY EXERCISE BICYCLES AND UPPER BODY CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 14930 : 2009 AGRICULTURAL AND FORESTRY MACHINERY AND GARDENING EQUIPMENT - PEDESTRIAN CONTROLLED AND HAND-HELD MACHINES - DETERMINATION OF ACCESSIBILITY OF HOT SURFACES
UNI EN 818-6 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 13531 : 2009 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
UNI EN 1034-4 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
UNI EN 14439 : 2009 CRANES - SAFETY - TOWER CRANES
UNI EN 1459 : 2013 SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS
UNI EN 13042-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNI EN 201 : 2010 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 14466 : 2008 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
UNI EN 12012-3 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
UNI EN 13157 : 2009 CRANES - SAFETY - HAND POWERED CRANES
UNI EN 14861 : 2010 FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 1218-4 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNI EN 12629-2 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
UNI EN 13112 : 2010 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
UNI EN 12851 : 2010 FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
EN 50338:2006 Safety of household and similar electrical appliances - Particular requirements for pedestrian-controlled battery powered electrical lawn mowers
UNI EN 12629-1 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 618 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF BULK MATERIALS EXCEPT FIXED BELT CONVEYORS
UNI EN 474-6 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS
UNI EN 12601 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
UNI EN 474-5 : 2013 EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS
UNI EN 710 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
UNI EN 818-3 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4
UNI EN 1034-7 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
UNI EN 12984 : 2010 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1756-2 : 2009 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
UNI EN 1034-6 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
UNI EN ISO 20643 : 2012 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
UNI EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
UNI EN 1093-2 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 2: TRACER GAS METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
UNI EN 14656 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNI EN 415-5 : 2010 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
UNI EN 1493 : 2010 VEHICLE LIFTS
UNI EN 1678 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13885 : 2010 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13534 : 2010 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
UNI EN 474-3 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
UNI EN 1915-4 : 2012 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
UNI EN 1915-3 : 2012 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 3: VIBRATION MEASUREMENT METHODS AND REDUCTION
UNI EN 746-2 : 2011 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 1760-2 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
UNI EN 1870-1 : 2009 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNI EN 12409 : 2011 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
UNI EN 12753 : 2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 474-9 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN 1247 : 2010 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 14238 : 2009 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
UNI EN 836 : 2011 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
UNI EN 13042-5 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNI EN 16297-1 : 2012 PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS - PART 1: GENERAL REQUIREMENTS AND PROCEDURES FOR TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI)
UNI EN 12629-4 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 4: CONCRETE ROOF TILE MAKING MACHINES
ONORM EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 12629-7 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
UNI EN 931 : 2010 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
UNI EN 13000 : 2014 CRANES - MOBILE CRANES
UNI EN 1175-3 : 2010 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
UNI EN 12629-5-2 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-2: PIPE MAKING MACHINES MANUFACTURING IN THE HORIZONTAL AXIS
UNI EN 1777 : 2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
UNI EN 474-2 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS
UNI EN 1550 : 2008 MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
UNI EN 930 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
UNI EN 14502-2 : 2008 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
EN 500-3:2006+A1:2008 Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
UNI EN 12336 : 2009 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 869 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
UNI EN 1034-2 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
UNI EN 12044 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 1093-3 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 12629-5-1 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-1: PIPE MAKING MACHINES MANUFACTURING IN THE VERTICAL AXIS
UNI EN 818-5 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
UNI EN 12853 : 2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 500-6 : 2009 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS
UNI EN 12629-8 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 8: MACHINES AND EQUIPMENT FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CALCIUM-SILICATE (AND CONCRETE)
UNI EN 14010 : 2009 SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
UNI EN 1494 : 2009 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
UNI EN 1248 : 2009 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 1760-1 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNI EN 12525 : 2010 AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY
UNI EN 1034-5 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
UNI EN 14886 : 2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
UNI EN 1807 : 2010 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 1034-14 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
BS EN 1247 : 2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN 12158-2 : 2010 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
UNI EN 12921-3 : 2009 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
UNI EN 818-2 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
UNI EN 13102 : 2009 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
UNI EN 422 : 2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 13570 : 2010 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1374 : 2010 AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
UNI EN 12355 : 2010 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 741 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
UNI EN 13135-1 : 2010 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
UNI EN 415-7 : 2008 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
UNI EN 1218-3 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
UNI EN 1175-2 : 2010 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
UNI EN 14958 : 2009 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12505 : 2010 FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1760-3 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNI EN 13675 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
UNI EN 1034-13 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
UNI EN 1034-22 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
UNI EN 13591 : 2010 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 474-4 : 2012 EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN 474-10 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
UNI EN 14018 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
UNI EN 13114 : 2010 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNI EN 14681 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
UNI EN 1547 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
UNI EN 14710-2 : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
UNI EN 12622 : 2014 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
UNI EN 746-1 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
DIN EN 1010-2:2011-05 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010)
UNI EN 15164 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
04/30113996 DC : 0 PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
DIN EN 15746-1:2016-02 (Draft) Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working; German and English version prEN 15746-1:2015
DIN EN 15848:2010-06 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
11/30244204 DC : 0 BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
10/30227080 DC : DRAFT JUNE 2010 BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
04/30124330 DC : 0 EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS
CLC/TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
12/30261704 DC BS EN 60335-2-45 AMD1. Household and similar electrical appliances. Safety. Part 2-45. Particular requirements for portable heating tools and similar appliances
10/30214961 DC : 0 BS EN 12312-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 1: PASSENGER STAIRS
NF EN 13035-11 : 2006 + A1 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
BS EN 15714-4:2009 Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements
I.S. EN 12601:2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
08/30182786 DC : DRAFT JULY 2008 BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
10/30234205 DC : 0 BS EN 15429-2 - SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
11/30240513 DC : 0 BS EN 12312-4 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 4: PASSENGER BOARDING BRIDGES
08/30181655 DC : DRAFT SEP 2008 BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
NF EN 13411-8 : 2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
EN 15714-2:2009 Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements
09/30206303 DC : 0 BS EN 60335-2-40 FPRAD - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
10/30187739 DC : 0 BS EN 1175-2:1998/A1 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
UNI EN 15162 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
11/30244192 DC : 0 BS EN 16282-1 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 1: GENERAL REQUIREMENTS INCLUDING CALCULATION METHOD
09/30183113 DC : 0 BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS
I.S. EN 692:2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
PREN 848-3 : DRAFT 2010 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
09/30206804 DC : 0 BS EN 60335-1:2002/PRAF - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
11/30227089 DC : 0 BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
BS EN 12012-1 : 2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
10/30211872 DC : 0 BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
10/30207841 DC : 0 BS EN 500-4 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
09/30180832 DC : DRAFT AUG 2009 BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
PREN 81-21 : DRAFT 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 21: NEW PASSENGER AND GOODS PASSENGER LIFTS IN EXISTING BUILIDING
11/30236560 DC : 0 BS EN 16228-3 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 3: HORIZONTAL DIRECTIONAL DRILLING EQUIPMENT (HDD)
10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
UNE-EN 81-41:2011 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 115-2:2010 Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks
10/30187742 DC : 0 BS EN 1175-3:1998/A1 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
09/30178010 DC : 0 BS EN 12525:2000/A2 - AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY
UNI EN 15714-2 : 2009 INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
04/30123607 DC : DRAFT OCT 2004 EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 81-41:2016-06 (Draft) SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
08/30181434 DC : DRAFT DEC 2008 BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
BS EN 60335-2-92:2005 Household and similar electrical appliances. Safety Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
11/30236586 DC : 0 BS EN 16230-1 - LEISURE KART - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
DIN EN 13411-8 E : 2011 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
NF EN 15774 : 2011 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15162 E : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
09/30178322 DC : DRAFT JAN 2009 BS EN 1870-4 AMD1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 50325-5:2010 INDUSTRIAL COMMUNICATIONS SUBSYSTEM BASED ON ISO 11898 (CAN) FOR CONTROLLER-DEVICE INTERFACES - PART 5: FUNCTIONAL SAFETY COMMUNICATION BASED ON EN 50325-4
11/30244207 DC : 0 BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS - DESIGN AND SAFETY REQUIREMENTS
08/30185056 DC : DRAFT SEP 2008 BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1501-3 : 2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
CEI CLC/TR 50488 : 2007 RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
UNI EN 1829-1 : 2010 HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
05/19981975 DC : DRAFT JUN 2005 BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
BS EN 61784-3-6:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 6
DIN EN 13035-2:2008-10 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
UNE-EN 15714-4:2010 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
DIN EN 15000 E : 2009 SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
08/30175652 DC : DRAFT SEP 2008 BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
10/30187736 DC : 0 BS EN 1175-1:1998/A1 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
10/30182320 DC : 0 BS EN 1679-1:1998/A1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
17/30339894 DC : 0 BS EN 15895:2011/A1 - CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS
PREN 1034-3 : DRAFT 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
07/30170114 DC : 0 BS EN 201 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
BS EN 61310-1:2008 Safety of machinery. Indication, marking and actuation Requirements for visual, acoustic and tactile signals
05/30137922 DC : DRAFT AUG 2005 ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
04/30126179 DC : DRAFT DEC 2004 EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
12/30261708 DC BS EN 60335-2-99 AMD1. Household and similar electrical appliances. Safety. Part 2-99. Particular requirements for commercial electric hoods
DIN EN 15268:2008-11 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP
NF EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
09/30185888 DC : 0 BS EN 13411-8 - TERMINATION OF STEEL WIRE ROPES - SAFETY - PART 8: SWAGE TERMINALS AND SWAGING
BS EN 14017 : 2005 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
11/30236557 DC : 0 BS EN 16228-2 - DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 2: MOBILE DRILL RIGS FOR CIVIL AND GEOTECHNICAL ENGINEERING, QUARRYING AND MINING
04/30124187 DC : 0 PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
05/19981951 DC : 0 BS EN 1034-13 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: AUXILIARY EQUIPMENT FOR DE-WIRING BALES AND UNITS
05/30133451 DC : 0 EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS
12/30261699 DC : DRAFT MAR 2012 BS EN 60335-2-27 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-27: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION
05/19986699 DC : 0 BS EN 1829-2 - HIGH PRESSURE CLEANERS - HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND JOINTS FOR HIGH-PRESSURE CLEANERS, HIGH-PRESSURE WATER JET MACHINES AND WATER JET CUTTERS AS WELL AS SAFETY DEVICES TO SAFEGUARD JOINTS FOR HOSE LINES
06/30146499 DC : DRAFT FEB 2006 ISO 20957-10 - STATIONARY TRAINING EQUIPMENT - PART 10: EXERCISE BICYCLES WITH A FIXED WHEEL OR WITHOUT FREEWHEEL ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
05/30076956 DC : 0 BS EN 12445 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
BS EN ISO 13732-3:2008 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces Cold surfaces
BS EN 14886:2008 Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements
05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS 6912-25(2001) : 2001 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
UNI EN 15000 : 2009 SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS
UNI EN 15429-2 : 2013 SWEEPERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
NF EN 81-31 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
BS EN 13035-6 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
04/30086349 DC : DRAFT APR 2004 EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
NF EN 13035-7 : 2006 + A1 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
DIN EN 13035-6:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009)
DIN EN 15061 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
DIN EN 15714-4:2010-02 Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements
DIN EN 15848 E : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 115-2:2010-12 Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks
DIN EN 15166 E : 2010 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 50110-1:2014 Operation of electrical installations - Part 1: General requirements
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 15848:2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
S.R. CLC/TS 62046:2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
S.R. CLC/TR 50488:2007 RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES
I.S. EN 894-4:2010 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
XP CEN/TS 13001-3-5 : 2010 XP CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE FOR FORGED HOOKS
PREN 13852-1 : DRAFT 2011 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
BS EN 50050:2006 Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment
BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
NF EN 15895 : 2011 CARTRIDGE-OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND MARKING TOOLS
I.S. EN 15746-1:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
PREN 16282-8 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
PREN 13020 : DRAFT 2014 ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS
DIN EN 12629-5-1:2011-02 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis (includes Amendment 1:2010)
DIN EN 12629-2:2011-01 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines (includes Amendment A1:2010)
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
UNI EN 913 : 2009 GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
DIN EN 12629-5-4:2011-02 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines (includes Amendment 4:2010)
EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
I.S. EN 81-31:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
BS EN 12301 : 2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 13035-5:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
DIN EN 14985:2012-05 Cranes - Slewing jib cranes
NF EN 1974 : 1998 + A1 2009 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15166:2008 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
NF EN 13525 : 2005 + A2 2009 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
I.S. EN 15573:2008 EARTH-MOVING MACHINERY - DESIGN REQUIREMENTS FOR CIRCULATION ON THE ROAD
EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
NF EN 12312-15 : 2006 + A1 2010 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS
I.S. EN 267:2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 12312-18:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: NITROGEN OR OXYGEN UNITS
DIN EN 15056 E : 2010 CRANES - REQUIREMENTS FOR CONTAINER HANDLING SPREADERS
DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 474-7:2010-04 Earth-moving machinery - Safety - Part 7: Requirements for scrapers (includes Amendment A1:2009)
DIN EN 474-5:2013-12 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators (includes Amendment A3:2013)
DIN EN 710:2010-10 Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010)
DIN EN 500-3:2009-05 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES
EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
DIN EN 13977:2011-04 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
DIN EN 474-6:2010-05 Earth-moving machinery - Safety - Part 6: Requirements for dumpers (includes Amendment A1:2009)
DIN EN 1093-2:2008-09 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 2: TRACER GAS METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
DIN EN 528:2009-02 Rail dependent storage and retrieval equipment - Safety requirements
DIN EN 201:2010-02 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 972:2011-07 Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010)
DIN EN 14673 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 14439:2010-03 CRANES - SAFETY - TOWER CRANES
DIN EN 618:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
DIN EN 1093-1:2009-02 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS
DIN EN 13886:2011-02 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 617:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010)
DIN EN 14658 E : 2010 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
DIN EN 1870-1:2009-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 12101-10:2006-01 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
DIN EN 1114-3:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 474-12:2010-05 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators (includes Amendment A1:2008)
DIN EN 12629-3:2011-02 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines (includes Amendment A1:2010)
DIN EN 818-6:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
DIN EN 14656 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 836:2012-07 GARDEN EQUIPMENT - POWERED LAWNMOWERS - SAFETY
DIN EN 12629-7:2011-03 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (includes Amendment A1:2010)
DIN EN 1093-3:2008-09 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 3: TEST BENCH METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
BS EN 12629-2 : 2002 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
BS EN 13921:2007 Personal protective equipment. Ergonomic principles
DIN EN 12301:2010-02 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 415-5 : 2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
BS EN 1093-1:2008 Safety of machinery. Evaluation of the emission of airborne hazardous substances Selection of test methods
BS EN 13135-1 : 2003 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
UNE-EN 14655:2006 Food processing machinery - Baguette slicers - Safety and hygiene requirements
BS EN 12101-10:2005 Smoke and heat control systems Power supplies
BS EN 1005-5:2007 Safety of machinery. Human physical performance Risk assessment for repetitive handling at high frequency
BS EN 13885 : 2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1612-2 : 2000 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 12629-5-1 : 2003 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 5-1: PIPE MAKING MACHINES MANUFACTURING IN THE VERTICAL AXIS
BS EN 13675 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
BS EN 13683 : 2003 GARDEN EQUIPMENT - INTEGRALLY POWERED SHREDDERS/CHIPPERS - SAFETY
BS EN 13525 : 2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1550 : 1997 MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
BS EN 1175-2 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 2: GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
BS EN 13035-4 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
BS EN 13621 : 2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1804-3 : 2006 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
UNE-EN 12601:2011 Reciprocating internal combustion engine driven generating sets - Safety
BS EN 12267 : 2003 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 869 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
BS EN 1547 : 2001 INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
BS EN 12525 : 2000 AGRICULTURAL MACHINERY - FRONT LOADERS - SAFETY
BS EN 818-4 : 1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
I.S. EN 12312-15:2006 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS
BS EN 12158-2 : 2000 BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES
BS EN 931 : 1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
BS EN 957-5:2009 Stationary training equipment Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
BS EN 1756-2 : 2004 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
BS EN 12921-4 : 2005 MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS AND VAPOURS - PART 4: SAFETY OF MACHINES USING HALOGENATED SOLVENTS
BS EN 619 : 2002
UNE-EN 1459:2000 SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED VARIABLE REACH TRUCKS
BS EN 13367 : 2005 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
BS EN 703 : 2004 AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN 1034-4 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
BS EN 500-1 : 2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 12336 : 2005 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
BS EN 13112 : 2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN 12312-20 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 13208 : 2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13288:2006 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
BS EN 14710-1 : 2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
BS EN 474-6 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS
EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety
BS EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Noise test code for refuse collection vehicles
UNE-EN 741:2000 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
UNE-EN 1175-1:1998 SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS.
BS EN 1034-6 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
BS EN 12012-3 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
UNE-EN 12649:2009 Concrete compactors and smoothing machines - Safety
BS EN 201:2009 Plastics and rubber machines. Injection moulding machines. Safety requirements
BS EN 500-2 : 2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD-MILLING MACHINES
BS EN 1915-2 : 2001 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 2: STABILITY AND STRENGTH REQUIREMENTS, CALCULATIONS AND TEST METHODS
BS EN 12312-17 : 2004 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 17: AIR CONDITIONING EQUIPMENT
UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
BS EN 13042-1 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
BS EN 1915-4 : 2004 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
BS EN 13977:2011 Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
BS EN 13021 : 2003 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
BS EN 930 : 1997 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
UNE-EN 1248:2001 Foundry Machinery - Safety requirements for abrasive blasting equipment.
UNE-EN 12622:2011 Safety of machine tools - Hydraulic press brakes
UNE-EN 13114:2002 Tannery machines- Rotating process vessels - Safety requirements.
BS EN 1807 : 1999 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
BS EN 1034-2 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
UNE-EN 12505:2001 FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS
BS EN 14985:2012 Cranes. Slewing jib cranes
BS EN 13288 : 2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 20643:2012-10 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012) (includes Amendment :2012)
BS EN 1756-1 : 2001 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
BS EN 13237:2012 Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
BS EN 415-7 : 2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
BS EN 972 : 1998 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
BS EN 818-2 : 1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 8
ISO 13732-3:2005 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
BS EN 13157 : 2004 CRANES - SAFETY - HAND POWERED CRANES
BS EN 13411-7 : 2006 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
BS EN 1265 : 1999 SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
BS EN 1248 : 2001 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
UNE-EN 1846-2:2011 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNE-EN 16297-1:2013 Pumps - Rotodynamic pumps - Glandless circulators - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
BS EN 422:2009 Plastics and rubber machines. Blow moulding machines. Safety requirements
UNI EN 12301 : 2008 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 13035-9 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
UNE-EN 619:2003 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
BS EN 14010 : 2003
BS EN 14502-2 : 2005 CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
BS EN 1760-2 : 2001 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
BS EN 1093-2 : 2006 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 2: TRACER GAS METHOD FOR THE MEASUREMENT OF THE EMISSION RATE OF A GIVEN POLLUTANT
BS EN 12044 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
UNE-EN 617:2002 Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
BS EN 13155 : 2003 CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
BS EN 15027 : 2007 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
UNE-EN 13112:2002 Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
BS EN 14710-2 : 2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
BS EN 12312-11:2005 Aircraft ground support equipment. Specific requirements Container/pallet dollies and loose load trailers
BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
10/30218104 DC : 0 BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
UNE-EN 12409:2009 Plastics and rubber machines - Thermoforming machines - Safety requirements
UNE-EN 12158-1:2001 Builders hoists for goods. Part 1: Hoists with accessible platforms.
BS EN 13114 : 2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
BS EN 12312-16 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT
UNE-EN 13591:2006 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
BS EN 1034-7 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
BS EN 13042-5 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNE-EN 1247:2005 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
I.S. EN 13525:2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
BS EN 474-12 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
BS EN 13113 : 2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNE-EN 1756-2:2005 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
BS EN 1114-3 : 2001 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
BS EN 474-5 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORS
BS EN ISO 20643 : 2008 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
BS EN 1846-2 : 2009 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
UNE-EN 1175-3:1998 SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS.
UNE-EN 13000:2010 Cranes - Mobile cranes
UNE-EN 13525:2005 Forestry machinery - Wood chippers - Safety
BS EN 14439 : 2006 CRANES - SAFETY - TOWER CRANES
BS EN 1494 : 2001 MOBILE OR MOVABLE JACKS AND ASSOCIATED LIFTING EQUIPMENT
UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
BS EN 12312-15 : 2006 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS
BS EN 13591 : 2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12312-19 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS, AXLE JACKS AND HYDRAULIC TAIL STANCHIONS
UNE-EN 620:2002 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
BS EN 1760-1 : 1998 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNE-EN 618:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors.
UNE-EN 12158-2:2001 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices.
UNE-EN 13463-1:2011 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
BS EN 12854 : 2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13113:2002 Tannery machines - Roller coating machines - Safety requirements.
BS EN 1151-1:2006 Pumps. Rotodynamic pumps. Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations Non-automatic circulation pumps, requirements, testing, marking
DIN EN 15056:2010-02 Cranes - Requirements for container handling spreaders (includes Amendment A1:2009)
DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
BS EN 1672-2 : 2005 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 13042-5:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009)
BS EN 818-5 : 1999 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4
EN 61310-2:2008