ISO/TS 11139:2006
Withdrawn
Withdrawn
View Superseded by
Sterilization of health care products — Vocabulary
Available format(s)
Hardcopy , PDF
Language(s)
English - French
Published date
01-13-2006
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO/TS 11139:2006 gives definitions of terms in the field of sterilization technology.
ISO/TS 11139:2006 does not provide requirements for the validation and routine control of a sterilization process, but is intended to contribute fundamentally towards mutual understanding amongst those preparing and using International Standards in the field of sterilization technology.
| Committee |
ISO/TC 198
|
| DevelopmentNote |
DRAFT ISO/DIS 11139 is also available for this standard. (06/2017)
|
| DocumentType |
Technical Specification
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN NPR ISO/TS 11139 : 2006 | Identical |
| SAC GB/T 19971 : 2015 | Identical |
| NBR ISO/TS 11139 : 2009 | Identical |
| AAMI ISO TIR 11139 : 2006 | Identical |
| NEN NVN ISO/TS 11139 : 2002 | Identical |
| ANSI/AAMI/ ISO 11137-2:2013(R2019) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
| 17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| BS EN ISO 5840-2:2015 | Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| I.S. EN ISO 22442-3:2007 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| PREN ISO 11140-1 : DRAFT 2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012) |
| ANSI/AAMI/ISO 13408-3:2006(R2015) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN ISO 4833-2:2013 | Microbiology of the food chain. Horizontal method for the enumeration of microorganisms Colony count at 30 degrees C by the surface plating technique |
| 16/30302485 DC : 0 | BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT |
| ANSI/AAMI/ISO 11138-1:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| 05/30138310 DC : DRAFT AUG 2005 | ISO 15882 ED 2 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 07/30157769 DC : DRAFT DEC 2007 | BS EN ISO 11737-2 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE VALIDATION OF A STERILIZATION PROCESS |
| AAMI ISO 22442-3:2007 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| AAMI ISO 13408-1 : 2008 : R2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| PREN ISO 11137-2 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| I.S. EN ISO 18369-1:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01) |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| S.R. CEN ISO/TS 16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 (ISO/TS 16775:2014) |
| BS EN ISO 17664:2017 | Processing of health care products. Information to be provided by the medical device manufacturer for the processing of medical devices |
| AAMI ISO 13408-5 : 2006 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| I.S. EN ISO 5840-1:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015) |
| AAMI ISO 13408-3:2006 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 4833-1:2013 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE ENUMERATION OF MICROORGANISMS - PART 1: COLONY COUNT AT 30 DEGREES C BY THE POUR PLATE TECHNIQUE (ISO 4833-1:2013) |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN ISO 11140-1:2015-03 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11140-1:2014 | Sterilization of health care products. Chemical indicators General requirements |
| ISO 11135-1:2007 | Sterilization of health care products — Ethylene oxide — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
| BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| ISO 11140-1:2014 | Sterilization of health care products — Chemical indicators — Part 1: General requirements |
| DIN EN 1422:1997-11 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| EN ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes |
| BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| ISO/TR 20520:2018 | Traditional Chinese medicine — Infection control for acupuncture treatment |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| I.S. EN ISO 13408-5:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| AAMI TIR52 : 2014(R2017) | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| 15/30321502 DC : 0 | BS EN ISO 11138-1 - STERILIZATION OF HEALTH PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 11607-2:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006 + AMD 1.:2014) |
| I.S. EN ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| DIN EN ISO 13408-1:2015-12 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| 12/30238553 DC : 0 | BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 04/30066665 DC : DRAFT MARCH 2004 | BS ISO 13408-6 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6 - ISOLATOR SYSTEMS |
| 04/30090379 DC : DRAFT MAR 2004 | BS ISO 13408-4 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 4: CLEAN-IN-PLACE TECHNOLOGIES |
| 14/30266295 DC : 0 | BS ISO 18362 - PROCESSING OF CELL-BASED HEALTH CARE PRODUCTS |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 22442-3 : 2007 : R2011 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| BS EN ISO 11607-2 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| ISO 19979:2018 | Ophthalmic optics — Contact lenses — Hygienic management of multipatient use trial contact lenses |
| ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD CEN/TS 16244:2018 | Ventilation in hospitals. Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| AAMI ISO 11137-2 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| BS EN ISO 13408-1:2015 | Aseptic processing of health care products General requirements |
| ISO 18369-1:2017 | Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| BS EN ISO 13408-6 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| AAMI ISO 11607-2:2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| AAMI ISO 11737-1 : 2006 : R2011 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| I.S. EN ISO 13408-6:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS (ISO 13408-6:2005) |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN 556-2:2015-11 | Sterilization of medical devices - Requirements for medical devices to be designated \"STERILE\" - Part 2: Requirements for aseptically processed medical devices |
| DIN EN ISO 22442-3:2008-03 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| BS EN 556-2:2015 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Requirements for aseptically processed medical devices |
| BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO 13408-6:2005 | Aseptic processing of health care products — Part 6: Isolator systems |
| ISO 13408-5:2006 | Aseptic processing of health care products — Part 5: Sterilization in place |
| BS EN ISO 11138-1:2017 | Sterilization of health care products. Biological indicators General requirements |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| ISO 25424:2009 | Sterilization of medical devices — Low temperature steam and formaldehyde — Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
| EN ISO 5840-2:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| I.S. EN ISO 11140-1:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11140-1:2014) |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 11137-2:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE (ISO 11137-2:2013) |
| I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 5840-1:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| I.S. EN ISO 11138-1:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN ISO 11137-2:2015-11 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| I.S. EN 1422:2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| I.S. EN ISO 15882:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 14/30270462 DC : 0 | BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
| ISO 5910:2018 | Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices |
| 13/30254718 DC : 0 | BS ISO 11040-7 - PREFILLED SYRINGES - PART 7: PACKAGING SYSTEMS FOR STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
| I.S. EN ISO 4833-2:2013 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE ENUMERATION OF MICROORGANISMS - PART 2: COLONY COUNT AT 30 DEGREES C BY THE SURFACE PLATING TECHNIQUE (ISO 4833-2:2013) |
| 09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| BS EN ISO 4833-1:2013 | Microbiology of the food chain. Horizontal method for the enumeration of microorganisms Colony count at 30 degrees C by the pour plate technique |
| DIN EN ISO 13408-5:2011-09 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 13408-5:2011 | Aseptic processing of health care products Sterilization in place |
| AAMI ISO 15882 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS EN ISO 5840-1:2015 | Cardiovascular implants. Cardiac valve prostheses General requirements |
| DIN EN ISO 13408-2:2011-09 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: FILTRATION |
| BS EN ISO 5840-3:2013 | Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques |
| 07/30090385 DC : 0 | ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| AAMI ISO 13408-6 : 2005 : INC : AMD 1 : 2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| DIN EN ISO 5840-2:2016-05 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| DIN EN ISO 5840-1:2015-12 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| AAMI TIR52 : 2014 | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
| CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
| AAMI ISO 11607-2 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| ISO 18362:2016 | Manufacture of cell-based health care products — Control of microbial risks during processing |
| I.S. EN ISO 5840-2:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| EN 13060:2014 | Small steam sterilizers |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 17664:2017 | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES |
| AAMI ISO 13408-5:2006(R2015) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 13408-3:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| NF EN ISO 13408-2 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: FILTRATION |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| ASTM E 3083 : 2017 | Standard Terminology Relating to Radiation Processing: Dosimetry and Applications |
| ISO 11737-2:2009 | Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 17664:2017 | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES (ISO 17664:2017) |
| ISO 17664:2017 | Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| ISO 15883-1:2006 | Washer-disinfectors — Part 1: General requirements, terms and definitions and tests |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 13408-3:2011 | Aseptic processing of health care products Lyophilization |
| BS ISO 11040-7:2015 | Prefilled syringes Packaging systems for sterilized subassembled syringes ready for filling |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| BS ISO 18362:2016 | Manufacture of cell-based health care products. Control of microbial risks during processing |
| AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| 04/30090382 DC : DRAFT NOV 2004 | ISO 13408-5 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: CLEANING IN PLACE |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| 17/30302489 DC : DRAFT MAR 2017 | BS EN ISO 13408-2 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
| DIN EN ISO 4833-1:2013-12 | Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 1: Colony-count at 30 degrees C by the pour plate technique (ISO 4833-1:2013) |
| DIN EN ISO 4833-2:2014-05 | Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique (ISO 4833-2:2013 + Cor. 1:2014) (includes Corrigendum :2014) |
| 09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 11/30219211 DC : 0 | BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 18369-1:2017 | Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications |
| NFX 50 796 : 2008 | AVAILABILITY OF MEDICAL DEVICES AT HOME - SERVICE COMMITMENTS |
| AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| 09/30197784 DC : 0 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| AAMI ISO 13408-6:2005 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| AAMI ISO 13408-1:2008 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| ANSI/AAMI/ISO 13408-6:2005(R2013)&A1:2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 6: ISOLATOR SYSTEMS |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| ANSI/AAMI/ISO TIR16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| I.S. EN ISO 11607-1:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014) |
| ISO 13485 - PRACTICAL GUIDE : 2016 | ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE |
| S.R. CEN/TS 16244:2018 | VENTILATION IN HOSPITALS - COHERENT HIERARCHIC STRUCTURE AND COMMON TERMS AND DEFINITIONS FOR A STANDARD RELATED TO VENTILATION IN HOSPITALS |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| DIN EN 14180:2014-09 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| ISO 14937:2009 | Sterilization of health care products — General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
| ISO 20857:2010 | Sterilization of health care products — Dry heat — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| ANSI/AAMI/ISO 15882:2008(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 5840-3:2013 | Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by transcatheter techniques |
| ISO 4833-1:2013 | Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 1: Colony count at 30 °C by the pour plate technique |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
| ISO 14534:2011 | Ophthalmic optics — Contact lenses and contact lens care products — Fundamental requirements |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| ISO 4833-2:2013 | Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 °C by the surface plating technique |
| ISO 5840-2:2015 | Cardiovascular implants — Cardiac valve prostheses — Part 2: Surgically implanted heart valve substitutes |
| ISO 13408-3:2006 | Aseptic processing of health care products — Part 3: Lyophilization |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| ISO 14160:2011 | Sterilization of health care products — Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives — Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| BS EN ISO 15882:2008 | Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results |
| EN ISO 13408-5:2011 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
| EN ISO 13408-1:2015 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| EN ISO 15882:2008 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008) |
| EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| DIN EN ISO 13408-6:2013-07 | Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005 + Amd 1:2013) (includes Amendment A1:2013) |
| I.S. EN 556-2:2015 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| I.S. EN ISO 13408-1:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
| 17/30326683 DC : DRAFT SEP 2017 | BS ISO 19979 - OPHTHALMIC OPTICS - CONTACT LENSES - HYGIENIC MANAGEMENT OF MULTIPATIENT USE TRIAL CONTACT LENSES |
| 04/30101211 DC : DRAFT APR 2004 | ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
| 16/30310949 DC : 0 | BS ISO 5910 - CARDIOVASCULAR IMPLANTS AND EXTRACOPOREAL SYSTEMS - CARDIAC VALVE REPAIR DEVICES |
| S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| DIN EN ISO 4833-2 E : 2014 | MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE ENUMERATION OF MICROORGANISMS - PART 2: COLONY COUNT AT 30 DEGREES C BY THE SURFACE PLATING TECHNIQUE (ISO 4833-2:2013 + COR. 1:2014) |
| DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| I.S. EN ISO 11607-2:2017 & LC:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006, INCLUDING AMD 1:2014) |
| 04/30101215 DC : DRAFT APR 2004 | ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| CEN/TS 16244:2018 | Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 11040-7:2015 | Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling |
| DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| BS ISO 19979:2018 | Ophthalmic optics. Contact lenses. Hygienic management of multipatient use trial contact lenses |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| 17/30362728 DC : 0 | BS EN 17169 - TATTOOING - SAFE AND HYGIENIC PRACTICE |
| EN ISO 17664:2017 | Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices (ISO 17664:2017) |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 15378:2017 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
| DIN EN ISO 15883-1:2014-10 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006 + Amd 1:2014) (includes Amendment A1:2014) |
| DIN EN ISO 11138-1:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| BS EN 1422:2014 | Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 11137-2:2015 | Sterilization of health care products. Radiation Establishing the sterilization dose |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| ISO 14161:2009 | Sterilization of health care products — Biological indicators — Guidance for the selection, use and interpretation of results |
| ISO 5840-1:2015 | Cardiovascular implants — Cardiac valve prostheses — Part 1: General requirements |
| ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
| EN ISO 4833-1:2013 | Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 1: Colony count at 30 degrees C by the pour plate technique (ISO 4833-1:2013) |
| EN ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents (ISO 22442-3:2007) |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
| ANSI/AAMI ST15883-1:2009(R2023) | Washer-disinfectors — Part 1: General requirements, terms and definitions and tests |
| UNE-EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| UNE-EN ISO 13408-5:2011 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| I.S. EN ISO 11135:2014&A1:2019/LC:2019 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E, Single batch release (ISO 11135:2014/Amd 1:2018)<br> |
| I.S. EN ISO 11137-1:2015/A2:2019 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices - Amendment 2: Revision to 4.3.4 and 11.2 (ISO 11137- 1:2006/Amd 2:2018) |
| UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| UNE-EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| UNE-EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| UNE-EN 556-2:2016 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| UNE-EN ISO 11607-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014) |
| UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
| UNE-EN ISO 4833-1:2014 | Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 1: Colony count at 30 degrees C by the pour plate technique (ISO 4833-1:2013) |
| UNE-EN ISO 5840-1:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
| UNE-EN ISO 13408-2:2011 | Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003) |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| UNE-EN ISO 11140-1:2015 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
| UNE-EN 13060:2015 | Small steam sterilizers |
| UNE-EN ISO 5840-2:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| CSA ISO Z14161:2011(R2020) | Sterilization of health care products — Biological indicators — Guidance for the selection, use and interpretation of results |
| UNE-EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| UNE-EN ISO 13408-6:2011 | Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005) |
| ANSI/AAMI/ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements. |
| I.S. EN ISO 15883-1:2009/A1:2014 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006/Amd 1:2014) |
| UNE-EN ISO 4833-2:2014 | Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique (ISO 4833-2:2013) |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| AAMI TIR52:2014(R2022) | Environmental monitoring for terminally sterilized healthcare products |
| ISO 13485:2016 | Medical devices — Quality management systems — Requirements for regulatory purposes |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| SA HB 13485:2020 | AS ISO 13485:2017 - Medical devices - A practical guide |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.