ASTM D 5188 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
05122023
English
27042016
This test method covers the determination of the temperature at which the vapor formed from a selected volume of volatile petroleum product saturated with air at 0 °C to 1 °C (32 °F to 34 °F) produces a pressure of 101.3 kPa (one atmosphere) against vacuum.
1.1This test method covers the determination of the temperature at which the vapor formed from a selected volume of volatile petroleum product saturated with air at 0 °C to 1 °C (32 °F to 34 °F) produces a pressure of 101.3 kPa (one atmosphere) against vacuum. This test method is applicable to samples for which the determined temperature is between 36 °C and 80 °C (97 °F and 176 °F) and the vaporliquid ratio is between 8 to 1 and 75 to 1.
Note 1:When the vaporliquid ratio is 20:1, the result is intended to be comparable to the results determined by Test Method D2533.
Note 2:This test method may also be applicable at pressures other than one atmosphere, but the stated precision may not apply.
1.2This test method is applicable to both gasoline and gasolineoxygenate blends.
1.2.1Some gasolineoxygenate blends may show a haze when cooled to 0 °C to 1 °C. If a haze is observed in 12.5, it shall be indicated in the reporting of results. The precision and bias statements for hazy samples have not been determined (see Note 12).
1.3The values stated in SI units are to be regarded as standard.
1.3.1Exception—The values given in parentheses are provided for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warnings, see Section 7 and subsection 8.1.1.
Committee 
D 02

DocumentType 
Test Method

Pages 
5

PublisherName 
American Society for Testing and Materials

Status 
Superseded

SupersededBy  
Supersedes 
ASTM D 4814 : 2023  Standard Specification for Automotive SparkIgnition Engine Fuel 
ASTM D 7826 : 2023 : REV A  Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives 
ASTM D 7826 : 2019  Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives 
ASTM D 4814 : 2019  Standard Specification for Automotive SparkIgnition Engine Fuel 
ASTM D 4057 : 2019  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 4057 : 1995  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 6299 : 2010  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2013 : EDT 1  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6708 : 2018  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2015  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2013  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6299 : 2017 : REV A  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2017 : REV B  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2009  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6708 : 2007  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 4057 : 2012 : R2018  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 6299 : 2013  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2011  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6299 : 2021  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6708 : 2016 : REV B  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6299 : 2010 : EDT 1  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2022 : EDT 1  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6708 : 2006  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 4057 : 1981 : EDT 2  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 2892 : 1999 : REV A  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 2892 : 2018 : REV A  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 2892 : 2010  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6708 : 2004  Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2019  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2016 : REV A  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2008  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6299 : 2000  Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2010 : EDT 2  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2016  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2005  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 2892 : 2020  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 4057 : 2006  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 6299 : 2019  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 4057 : 2012  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 6299 : 2023 : EDT 1  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2000 : REV A  Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2017  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 2892 : 2016  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 2533 : 1999  Standard Test Method for VaporLiquid Ratio of SparkIgnition Engine Fuels (Withdrawn 2008) 
ASTM D 6708 : 2001  Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2021  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 2892 : 2018  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6299 : 2023  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6299 : 2020  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2023  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6708 : 2001 : EDT 1  Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6299 : 2008  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6708 : 2005  Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6708 : 2013 : EDT 1  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6299 : 2002 : EDT 1  Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 6708 : 2016  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 2892 : 2017 : REV A  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 2892 : 2019  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6299 : 2022  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2013  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 4057 : 2022  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 2892 : 2001  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6708 : 2019 : REV A  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 6299 : 2007  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2015  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6299 : 2007 : EDT 1  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2003  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 4057 : 1995 : R2000  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 6299 : 2020 : REV A  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 2892 : 2011 : REV A  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6299 : 2017  Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance 
ASTM D 4057 : 2006 : R2011  Standard Practice for Manual Sampling of Petroleum and Petroleum Products 
ASTM D 6708 : 2019 : REV A : EDT 1  Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material 
ASTM D 2892 : 2003 : REV A  Standard Test Method for Distillation of Crude Petroleum (15Theoretical Plate Column) 
ASTM D 6299 : 2002  Standard Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance 
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features

Simple online access to standards, technical information and regulations.

Critical updates of standards and customisable alerts and notifications.

Multiuser online standards collection: secure, flexible and cost effective.