• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60439-1:1999/A1:2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
Amendment of

EN 60439-1:1999

Superseded date

01-11-2009

Published date

12-01-2013

1 General
  1.1 Scope and object
  1.2 Normative references
2 Definitions
  2.1 General
  2.2 Constructional units of ASSEMBLIES
  2.3 External design of ASSEMBLIES
  2.4 Structural parts of ASSEMBLIES
  2.5 Conditions of installation of ASSEMBLIES
  2.6 Protective measures with regard to electric shock
  2.7 Gangways within ASSEMBLIES
  2.8 Electronic functions
  2.9 Insulation co-ordination
  2.10 Short-circuit currents
3 Classification of ASSEMBLIES
4 Electrical characteristics of ASSEMBLIES
  4.1 Rated voltages
  4.2 Rated current (I[n]) (of a circuit of an ASSEMBLY)
  4.3 Rated short-time withstand current (I[cw]) (of a
       circuit of an ASSEMBLY)
  4.4 Rated peak withstand current (I[pk]) (of a circuit
       of an ASSEMBLY)
  4.5 Rated conditional short-circuit current (I[cc])
       (of a circuit of an ASSEMBLY)
  4.6 Rated fused short-circuit current (I[cf])
       (of a circuit of an ASSEMBLY)
  4.7 Rated diversity factor
  4.8 Rated frequency
5 Information to be given regarding the ASSEMBLY
  5.1 Nameplates
  5.2 Markings
  5.3 Instructions for installation, operation and
       maintenance
6 Service conditions
  6.1 Normal service conditions
  6.2 Special service conditions
  6.3 Conditions during transport, storage and erection
7 Design and construction
  7.1 Mechanical design
  7.2 Enclosure and degree of protection
  7.3 Temperature rise
  7.4 Protection against electric shock
  7.5 Short-circuit protection and short-circuit withstand
       strength
  7.6 Switching devices and components installed in
       ASSEMBLIES
  7.7 Internal separation of ASSEMBLIES by barriers or
       partitions
  7.8 Electrical connections inside an ASSEMBLY: bars and
       insulated conductors
  7.9 Requirements for electronic equipment supply
       circuits
  7.10 Electromagnetic compatibility (EMC)
  7.11 Description of the types of electrical connections
       of functional units
8 Test specifications
  8.1 Classification of tests
  8.2 Type tests
  8.3 Routine tests
Annex A (normative) Minimum and maximum cross-sections
        of copper conductors suitable for connection
Annex B (normative) Method of calculating the cross-sectional
        area of protective conductors with regard to
        thermal stresses due to currents of short duration
Annex C (deleted)
Annex D (informative) Forms of internal separations
Annex E (informative) Items subject to agreement between
        manufacturer and user
Annex F (normative) Measurement of creepage distances and
        clearances
Annex G (normative) Correlation between the nominal voltage
        of the supply system and the rated impulse withstand
        voltage of the equipment
Annex H (normative) Electromagnetic compatibility (EMC)
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications
Bibliography

Applies to low-voltage switchgear and controlgear ASSEMBLIES (type-tested ASSEMBLIES (TTA) and partially type-tested ASSEMBLIES (PTTA)), the rated voltage of which does not exceed 1000 V a.c. at frequencies not exceeding 1000 Hz, or 1500 V d.c.

Committee
TC 17D
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy
Supersedes

BS EN 1870-19:2013 Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
08/30178378 DC : 0 BS EN 1218-3:2001/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
BS EN 61851-22:2002 Electric vehicle conductive charging system A.C. electric vehicle charging station
12/30253910 DC : DRAFT JULY 2012 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
PREN 1870-3 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
11/30237569 DC : 0 BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
09/30178325 DC : DRAFT FEB 2009 BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
PD CLC/TR 50479:2007 Electrical installation guide. Selection and erection of electrical equipment. Wiring systems. Limitation of temperature rise of connecting interfaces
02/709474 DC : DRAFT JULY 2002 BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
S.R. HD 60364-4-41:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
09/30197984 DC : 0 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 50490:2008 Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps
99/240940 DC : 0 BS EN 50331-1 - PHOTOVOLTAIC SYSTEMS IN BUILDINGS - PART 1: SAFETY REQUIREMENTS
CEI EN 50512 : 2014 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
I.S. EN 60439-4:2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
DIN EN 1807-1:2013-06 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN 45510-2-7:2003-12 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
PREN 1870-12 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN 1807-2:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61219:1994 LIVE WORKING - EARTHING OR EARTHING AND SHORT-CIRCUITING EQUIPMENT USING LANCES AS A SHORT-CIRCUITING DEVICE - LANCE EARTHING
CEI EN 60947-7-2 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-2: ANCILLARY EQUIPMENT - PROTECTIVE CONDUCTOR TERMINAL BLOCKS FOR COPPER CONDUCTORS
I.S. EN 50512:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
DIN EN 1870-7:2013-01 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
DIN EN 12978:2009-10 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
DIN EN 1870-12:2014-03 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
DIN EN 1870-16:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 1760-3:2009-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN 1870-3:2015-02 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
I.S. EN 861:2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNE-EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
BS EN 859 : 2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNE-EN 1870-7:2013 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 1870-15:2012 Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN 1870-10:2013 Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 1870-16:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
HD 384.4.41 S2:1996/A1:2002 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
EN 61822:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
EN 62040-1-2:2003/corrigendum:2004
EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
EN 61219:1993 Live working - Earthing or earthing and short-circuiting equipment using lances as short-circuiting device - Lance earthing
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 50490:2008 Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps
CEI 13-32 : 2000 WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
12/30265270 DC : 0 BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
BS EN 50091-1-2:1999 General and safety requirements for UPS used in restricted access locationsSpecification for uninterruptible power systems (UPS)
11/30237566 DC : 0 BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE-EN 1870-13:2008 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNI EN 1870-19 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
04/30106849 DC : DRAFT MAY 2004 EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
09/30198762 DC : 0 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
11/30237557 DC : 0 BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
12/30232434 DC : 0 BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1807-2:2013-06 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
UNE-EN 691-1:2013 Safety of woodworking machines - Part 1: Common requirements
PREN 1870-11 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
96/101548 DC : DRAFT MAR 1996 BS EN 12336 TUNNELLING MACHINES - SHIELD MACHINES, HORIZONTAL THRUST-BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
11/30244804 DC : 0 BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
CEI EN 61851-22 : 2003 ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
09/30178346 DC : 0 BS EN 1870-12:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
BS EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks
09/30178328 DC : 0 BS EN 1870-6:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
CEI EN 50490 : 2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
CEI EN 61921 : 2004 POWER CAPACITORS - LOW VOLTAGE POWER FACTOR CORRECTION BANKS
PREN 1870-6 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
S.R. CLC/TR 50479:2007 ELECTRICAL INSTALLATION GUIDE - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS - LIMITATION OF TEMPERATURE RISE OF CONNECTING INTERFACES
I.S. EN 1870-18:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
I.S. EN 691-1:2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 60204-32:2008 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
I.S. EN 62040-1-2:2004
I.S. EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
S.R. CLC/TS 50457-1:2008 CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: D.C. CHARGING STATION
DIN EN 1870-14:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1870-13:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 1870-10:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1870-8:2013-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
BS EN 1870-7:2012 Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 940 : 2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNE-EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 1760-3 : 2004 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
I.S. EN 1870-8:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
I.S. EN 1870-10:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
I.S. EN 1870-11:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1870-1:1999-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 1218-3:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1870-12:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN 1870-3:2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 746-2:2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 1870-15:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-17:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1760-1:1997-09 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
I.S. EN 1218-3:2002 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 1870-14:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
I.S. EN 12978:2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
I.S. EN 940:2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
I.S. EN 1870-5:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1760-2:2001-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
I.S. EN 1870-7:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 12336:2010-03 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 940 : 2012 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
VDE 0660-507 : 1997 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
VDI 3814 Blatt 3:2007-06 Building automation and control system (BACS) - Advices for technical building management - Planning, operation, and maintenance
DIN VDE 0660-100 : 1992 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
UNI EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
11/30237560 DC : 0 BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
BS EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes. Advanced visual docking guidance systems (A-VDGS)
UNE-EN 50490:2010 Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps
UNE-EN 50512:2011 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
I.S. EN 848-1:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
I.S. EN 115:1995 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS
08/30181001 DC : DRAFT APR 2008 BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
BS EN 1870-18:2013 Safety of woodworking machines. Circular sawing machines Dimension saws
10/30232428 DC : DRAFT DEC 2010 BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 1870-19 E : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
12/30253907 DC : DRAFT JULY 2012 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
10/30233212 DC : 0 BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
BS EN 1807-2:2013 Safety of woodworking machines. Band sawing machines Log sawing machines
10/30232425 DC : DRAFT DEC 2010 BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
10/30232431 DC : DRAFT DEC 2010 BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
04/30110326 DC : DRAFT APR 2004 EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
11/30237563 DC : 0 BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 60947-7-2:2009 Low-voltage switchgear and controlgear Ancillary equipment. Protective conductor terminal blocks for copper conductors
05/30133333 DC : DRAFT MAY 2005 EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 50298:1999 Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements
09/30178391 DC : 0 BS EN 12779:2004/A1 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
09/30178343 DC : 0 BS EN 1870-11:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
08/30178382 DC : 0 BS EN 1218-4:2004/A2 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNE-EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
UNE-EN 1870-6:2003 Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
I.S. EN 50091-1-2:2003
UNI EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. HD 60364-4-41:2007 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
I.S. EN 61921:2003 POWER CAPACITORS - LOW VOLTAGE POWER FACTOR CORRECTION BANKS
I.S. EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
CLC/TS 50457-1:2008 Conductive charging for electric vehicles - Part 1: D.C. charging station
I.S. EN 45510-2-7:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
PREN 1870-10 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 1870-14:2008 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
I.S. EN 50300:2004 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS
I.S. EN 60204-1:2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 60439-2:2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS)
DIN EN 1870-11:2014-02 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
DIN EN 1870-17:2015-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1870-15:2013-01 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
DIN EN 848-1:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 848-2:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
BS EN 848-1 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
BS EN 115:1995 Safety rules for the construction and installation of escalators and passenger conveyors.
BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
BS EN 861 : 2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNE-EN 1870-8:2013 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN 848-2 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNE-EN 848-1:2008 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
UNE-EN 848-3:2013 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
UNE-EN 60204-1:2007 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
I.S. EN 848-2:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 50298:1998 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
UNI EN 1870-8 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
UNI EN 1870-13 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNI EN 1870-15 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
UNI EN 848-3 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNI EN 1870-16 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
UNI EN 860 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES
UNI EN 815 : 2009 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
UNI EN 859 : 2012 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNI EN 1218-4 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNI EN 848-1 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNI EN 12978 : 2009 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
UNI EN 1870-4 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
EN 1870-11:2013 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
UNI EN 1870-12 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
UNI EN 1870-14 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
UNI EN 1870-10 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 1870-11 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
UNI EN 1760-2 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
UNI EN 1870-1 : 2009 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNI EN 848-2 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNI EN 12336 : 2009 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 746-2 : 2011 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 861 : 2012 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNI EN 1760-1 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNI EN 1218-3 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
UNI EN 1870-5 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 1760-3 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNI EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
UNI EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
IWA 14-2:2013 Vehicle security barriers — Part 2: Application
BS EN 691-1:2012 Safety of woodworking machines Common requirements
BS EN 50300:2004 Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards
10/30227080 DC : DRAFT JUNE 2010 BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 1870-19:2014-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
I.S. EN 848-3:2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
BS EN 62310-3:2008 Static transfer systems (STS) Method for specifying performance and test requirements
PREN 848-3 : DRAFT 2010 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
12/30263881 DC : 0 BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
CEI 17-43 : 2000 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
I.S. HD 528 S2:1999 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
DIN EN 1870-18:2013-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS EN 1807-1:2013 Safety of woodworking machines. Band sawing machines Table band saws and band re-saws
05/30137922 DC : DRAFT AUG 2005 ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
CLC/TR 50479:2007 Electrical installation guide - Selection and erection of electrical equipment - Wiring systems - Limitation of temperature rise of connecting interfaces
05/30133451 DC : 0 EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS
DD CLC/TS 50457-1:2008 Conductive charging for electric vehicles D.C. charging station
BS EN 61921:2003 Power capacitors. Low-voltage power factor correction banks
UNI EN 1870-18 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
09/30178353 DC : 0 BS EN 1870-16:2005/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
09/30178322 DC : DRAFT JAN 2009 BS EN 1870-4 AMD1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
UNE-EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
I.S. EN 1807-1:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
I.S. EN 62310-3:2008 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
S.R. CWA 16221:2010 VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION
I.S. EN 60947-7-2:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-2: ANCILLARY EQUIPMENT - PROTECTIVE CONDUCTOR TERMINAL BLOCKS FOR COPPER CONDUCTORS
GOST EN 1760-1 : 2004 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
I.S. EN 50490:2008 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
S.R. CLC/TR 50480:2011 DETERMINATION OF CROSS-SECTIONAL AREA OF CONDUCTORS AND SELECTION OF PROTECTIVE DEVICES
I.S. EN 61822:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - CONSTANT CURRENT REGULATORS
DIN EN 940:2012-05 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN 861:2012-09 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN 859:2012-09 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN 1870-1:2009-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 848-3:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 860:2012-09 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 1870-12:2013 Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines
95/214868 DC : 0 PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
BS EN 1218-3 : 2001 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
BS EN 815 : 1997 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
BS EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS)
BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN 12336 : 2005 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
PD CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices
UNE-EN 1870-15:2013 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN 12978 : 2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
BS EN 1870-3:2014 Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
BS EN 1870-11:2013 Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
UNE-EN 860:2007 Safety of woodworking machines - One side thickness planing machines
09/30202403 DC : 0 BS EN 50532 - COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
BS EN 1760-2 : 2001 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
BS EN 1870-13 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNE-EN 50532:2011 Compact Equipment Assembly for Distribution Substations (CEADS)
PD ISO/TR 14799-2:2005 Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments
UNE-EN 1870-16:2013 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
98/203095 DC : DRAFT JULY 1998 PRENV 50275-2-3 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-3: D.C. CHARGING STATION
BS EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 1760-1 : 1998 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
BS EN 860 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
EN 62310-3:2008 Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
EN 691-1:2012 Safety of woodworking machines - Part 1: Common requirements
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
EN 1870-13:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-14:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
EN 1870-1:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
EN 940:2009+A1:2012 Safety of woodworking machines - Combined woodworking machines
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 859:2007+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 848-2 : 2007 COR 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN 861:2007+A2:2012 Safety of woodworking machines - Surface planing and thicknessing machines
EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
09/30206358 DC : DRAFT SEP 2009 BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 691-1:2013-01 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 1870-1:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN 1870-13:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
EN 61851-22:2002 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
08/30178375 DC : 0 BS EN 1218-2:2004/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN 50298 : 1999 EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS
EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
BS EN 1870-6:2017 Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood
UNE-EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
BS EN 61822:2009 Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
09/30178385 DC : DRAFT FEB 2009 BS EN 1218-5:2004/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN
09/30178340 DC : 0 BS EN 1870-10:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
09/30178349 DC : 0 BS EN 1870-15:2004/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
09/30178334 DC : DRAFT FEB 2009 BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
09/30178331 DC : DRAFT FEB 2009 BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
07/30169926 DC : DRAFT AUG 2007 BS EN 50490 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS
CEI EN 62310-3 : 2010 STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 1870-19:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
DIN EN 1870-4:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. HD 384.4.41:1998 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
DIN EN 1218-2:2009-10 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
DIN EN 1870-5:2013-01 Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012)
DIN EN 1760-2:2009-08 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
DIN EN 1760-1:2009-08 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
DIN EN 1218-5:2010-02 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
BS EN 1870-8:2012 Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
BS EN 1870-16:2012 Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting
BS EN 848-3:2012 Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines
BS EN 62040-1-2:2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
I.S. EN 859:2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
I.S. EN 860:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 60204-1 : 2006 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 60204-32:2008 Safety of machinery. Electrical equipment of machines Requirements for hoisting machines
BS EN 1870-14 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
PD ISO/TR 14799-1:2005 Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison
BS EN 1870-17 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS EN 1870-1 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
EN 115:1995/A2:2004 SAFETY RULES FOR THE CONSTRUCTION & INSTALLATION OF ESCALATORS & PASSENGER CONVEYORS
DIN EN 815:1996-11 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
UNI EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
CLC/TR 50480:2011 Determination of cross-sectional area of conductors and selection of protective devices
EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
EN 61921:2003 Power capacitors - Low-voltage power factor correction banks
EN 60439-5:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS
EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
NF EN 1218-5 : 2004 + A1 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 50091-1-2 : 98 COR 1 99
DIN EN 815:2009-12 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
DIN VDE 0660-501 : 1992 SWITCHGEAR AND CONTROLGEAR; LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS)
EN 50300:2004 Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards

IEC 61000-4-8 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 60038:2009 IEC standard voltages
IEC 60227-4:1992+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60158-2:1982 Low-voltage controlgear. Part 2: Semiconductor contactors (solid state contactors)
HD 21-3 : S3 AMD 2 2008 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - NON-SHEATHED CABLES FOR FIXED WIRING
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
HD 214 : 200S2 RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
IEC 60502:1994 Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV
IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
HD 384.4.41 S2:1996/A1:2002 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
IEC 60050-471:2007 International Electrotechnical Vocabulary (IEV) - Part 471: Insulators
IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
HD 528 : 200S2 A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR
IEC 60227-3:1993+AMD1:1997 CSV Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
HD 625.1 : 200S1 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
HD 384.4.443 S1:2000 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 44: PROTECTION AGAINST OVERVOLTAGES - SECTION 443: PROTECTION AGAINST OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING
IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
IEC 60750:1983 Item designation in electrotechnology.
HD 588.1 : S1 AMD 1 HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS
EN 60099-1:1994/A1:1999 SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS
HD 472 S1:1989/AC:2013 NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS
EN 60947-1:2007/A2:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
HD 22-4 : 200S4 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 4: CORDS AND FLEXIBLE CABLES
IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
EN 60947-3:2009/A2:2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
IEC 60364-4-46:1981 Electrical installations of buildings. Part 4: Protection for safety. Chapter 46: Isolation and switching
EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC 61346-1:1996 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
HD 419.2 : 200S1 LOW-VOLTAGE CONTROLGEAR - SEMICONDUCTOR CONTACTORS (SOLID STATE CONTACTORS)
EN 61346-1:1996 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60245-4:2011 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60099-1:1991+AMD1:1999 CSV Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
EN 61000-6-4:2007/A1:2011 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
IEC 60146-2:1999 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 60364-3:1993 Electrical installations of buildings - Part 3: Assessment of general characteristics
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 60364-4-443:1995+AMD1:1998 CSV Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 443: Protection against overvoltages of atmospheric origin or due to switching
HD 384.5.54 : 200S1 ELECTRICAL INSTALLATION OF BUILDINGS - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
HD 384.3 : 200S2 ELECTRICAL INSTALLATIONS OF BUILDINGS - ASSESSMENT OF GENERAL CHARACTERISTICS
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
HD 243 : S12 GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - INDEX, SURVEY AND COMPILATION OF THE SINGLE SHEETS
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 61000-4-13:2002/A2:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002/A2:2015)
HD 384.4.46 : 200S2 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 46: ISOLATION AND SWITCHING
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
IEC TR 60890:2014 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.