• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-STD-2073-1 Revision E:2008

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

STANDARD PRACTICE FOR MILITARY PACKAGING

Available format(s)

PDF

Superseded date

23-07-2013

Language(s)

English

1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - DEVELOPMENT OF MILITARY PACKAGING
             REQUIREMENTS
APPENDIX B - FACTORS AND FORMULAE ESTABLISHING
             MILITARY PACKAGING QUP AND ICQ
APPENDIX C - CONTAINERS
APPENDIX D - DEVELOPMENT OF MILITARY PACKAGING
             REQUIREMENTS FOR KITS (PARTS AND MODIFICATION)
APPENDIX E - MILITARY PACKAGING DATA FORMS
APPENDIX F - MILITARY PACKAGING DESIGN VALIDATION PROVISIONS
APPENDIX G - QUALITY ASSURANCE PROVISIONS
APPENDIX H - PROCEDURES FOR COMPLIANCE WITH CONTAINER
             DESIGN RETRIEVAL SYSTEM (CDRS) REQUIREMENTS
APPENDIX J - MILITARY PACKAGING REQUIREMENT CODES
INDEX

Sketches standard processes for the development and documentation of military packaging. Specifies methods of preservation to protect materiel against environmentally induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation during storage, multiple handling, and shipment of materiel in the defense transportation system.

Committee
AREA PACK
DevelopmentNote
Supersedes PPP H 1581 (A), MIL STD 2073/2, MIL STD 1510, MIL P 116 & MIL M 55565. (03/2004) Supersedes MIL STD 794, MIL STD 647 & MIL STD 2073. (09/2004)
DocumentType
Standard
Pages
207
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
Supersedes

MIL-C-24938 Revision A:1993 COATS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY
ASTM F 1145 : 2005 : R2011 Standard Specification for Turnbuckles, Swaged, Welded, Forged
MIL-I-25859 Revision C:1995 INDICATOR, THRUST AEU-2/A, SYNCHRO STYLE, PRESSURE RATIO, 1.2-3.4 UNITS, INTEGRALLY LIGHTED
SAE AS 7460 : 2017 BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR
MIL C 83383 : C CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR
MIL-M-71213 Base Document:1995 MOUNT, MACHINE GUN: MK93 MOD1 (DUAL MOUNT)
MIL-H-7195 Revision G:1991 HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR
ASTM F 1567 : 1994 : R2006 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
MIL E 5589 : D EARPHONE, (EXTENDED RANGE), H-301/U
SAE AMS 3655D :2016 TUBING, ELECTRICAL INSULATION, THIN WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
SAE AS 7237 : 2012 RIVETS, NICKEL ALLOY, CORROSION AND HEAT RESISTANT 47.5NI-22CR-1.5CO-9.0MO-0.60W-18.5FE SOLUTION HEAT TREATED PROCUREMENT SPECIFICATION FOR
MIL-P-24752 Base Document:1990 PACKING MATERIAL, FLAX OR HEMP
SAE AMS 2762 : 2018 CARBURIZING - CARBON AND LOW-ALLOY STEEL PARTS
MIL-M-16149 Revision G:1990 MITTEN, WELDERS
MIL-DTL-6060 Revision E:2004 Bags, Watervaporproof, Heat-Sealable, Complex
MIL-C-87248 Base Document:1987 CAP, CAMOUFLAGE PATTERN (BASEBALL STYLE)
MIL-J-87250 Base Document:1988 JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER
MIL-C-29632 Base Document:1990 COAT, MAN'S, POLYESTER/WOOL, SERGE, FUSIBLE (COAST GUARD)
MIL-DTL-2845 Revision E:1999 PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF
MIL I 2818 : C INSULATION BLANKET, THERMAL, FIBROUS MINERAL
MIL H 26385 : E HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT
MIL-DTL-55235 Revision A:2003 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION
MIL-O-24905 Revision B:1990 OVERCOAT, MAN'S, REEFER (COAST GUARD)
SAE AMS 1379 : 2007 COMPOUND, ALKALINE RUST REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS
MIL-STD-290 Revision H:2013 PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS
MIL I 2781 : F INSULATION, PIPE THERMAL
MIL-DTL-12000 Revision K:2012 CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF
MIL-W-13855 Revision D:1973 WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR
SAE AMS 1384 : 2007 ACID, INHIBITED PHOSPHORIC AIRCRAFT TURBINE ENGINE COMPONENTS ROOM TEMPERATURE APPLICATION
MIL-DTL-85670 Revision D:2012 ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A
MIL-V-29592 Base Document:1993 VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR
MIL V 81940 : B VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS
MIL-M-24476 Revision B:1993 MOUNT, RESILIENT, TYPES 7M5O, 6M15O, 6M45O AND 6M9OO
J-W-1177 Revision B:1988 WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION
MIL-S-196 Revision D:1988 SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF
MIL-H-87041 Revision B:1983 HAT, SERVICE (WHITE)
MIL-H-24776 Base Document:1992 HYDRAZINE TEST KIT, NAVAL SHIPBOARD
MIL P 6279 : L PARKA, EXTREME COLD WEATHER, TYPE N 3B
SAE AMS C 3901 : 1998 ORGANIC FIBER (PARA-ARAMID), YARN AND ROVING, HIGH MODULUS
MIL-I-25863 Revision D:1990 INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED
MIL-P-15280 Revision J:1988 PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES)
MIL-T-21014 Revision D:1986 TUNGSTEN BASE METAL, HIGH DENSITY
MIL-C-87230 Revision A:1989 Coveralls, Flyer\'s, CWU-64/P (No S/S Document)
MIL-J-83388 Revision E:1992 JACKETS, FLYERS, COLD WEATHER
MIL-I-38121 Revision C:1989 INDICATOR, PRESSURE, EGU-9/A
MIL-S-23284 Revision A:1990 STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES)
MIL-C-19699 Revision E:1992 Cloth, Coated (Nylon Taffeta) (No S/S Document)
MIL-L-28654 Revision C:1988 LIFTING, LAUNCHING AND SIDE CARRYING EQUIPMENT FOR PONTOONS ON 1179 CLASS LST VESSELS
MIL-C-82283 Revision C:1991 CLOTH, TWILL, COTTON, LIGHTWEIGHT
MIL I 27197 : C INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED
MIL H 26626 : D HOSE ASSEMBLY, TETRAFLUOROETHYLENE, OXYGEN
MIL-A-5885 Revision D:1987 ACCELEROMETER, AIRCRAFT
MIL-A-22145 Revision C:1992 ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448)
MIL-I-16411 Revision F:1988 INSULATION FELT, THERMAL, GLASS FIBER
MIL-C-24903 Revision B:1990 CLOTH, ELASTIQUE, POLYESTER/WOOL
MIL-C-3131 Revision F:1995 CORDAGE, PACKING OF
SAE AS 85560 : 2013 BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR
MIL-H-18158 Revision E:1990 HOSE ASSEMBLY, AIR DUCT, LOW PRESSURE, FABRIC, WIRE STIFFENED, RETRACTABLE, NAVAL SHIPBOARD PORTABLE VENTILATING SET USE
MIL-I-85071 Revision A:1992 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR
MIL A 46177 : B ARMOR, STEEL PLATE & SHEET, WROUGHT, HOMOGENEOUS (1/8 TO LESS THAN 1/4 INCH THICK)
MIL-HDBK-470 Revision A:1997 DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
MIL P 26514 : F POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING
SAE AMS 3680 : 2015 Insulation, Thermal Silica Fiber(STABILIZED May 2015)
MIL M 17508 : F MOUNTS, RESILIENT: TYPES 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, AND 6E900BB
MIL DTL 46746 : E CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF
MIL-C-24500 Revision A:1990 CLOTH, DRAPERY, BUNK CURTAIN, SLIPCOVERS AND LABELS, FIRE RETARDANT
MIL-S-87214 Revision B:1992 SHIRTS, MEN'S, LONG AND SHORT SLEEVES, POLYESTER/COTTON (DURABLE PRESS)
MIL-B-28635 Revision D:1990 BOOKSHELF FOR BUNK BED
MIL-T-87038 Revision D:1990 TROUSERS, MEN'S (BLUE, ENLISTED)
MIL-C-38182 Revision C:1990 COVER, SERVICE CAP, MANS WATER REPELLENT
MIL-STD-3001-1 Revision A:2014 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS)
MIL C 39028 : C CAPACITORS, PACKAGING OF
MIL-DTL-4710 Revision E:2006 CASE SET, TRANSPORT AND STORAGE
MIL-A-83162 Revision A:1989 AMPLIFIER, SYNCHRO, SIGNAL AM-6015/A
MIL-HDBK-773 Revision A:2005 ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING
SAE AS 7235 : 2012 RIVETS, UNS S66286, STEEL, CORROSION AND HEAT RESISTANT, 80 KSI SHEAR STRENGTH, PROCUREMENT SPECIFICATION FOR
MIL-DTL-13139 Revision F:2010 Charge, Demolition, Shaped, 15 Lb.-M2A4 Parts for
MIL T 2118 : 0 TRAP, STEAM, THERMOSTATIC, NAVAL SHIPBOARD USE
MIL-DTL-50872 Revision D Interim Revision:2004 CARTRIDGE, 40 MM: HEDP, M433
SAE MA 1573 : 2016 NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC
MIL T 5780 : D NOTICE 1 TRANSMITTER, PRESSURE, MANIFOLD 10-75 INCH MERCURY
MIL M 9950 : A NOTICE 1 MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
MIL-T-24708 Base Document:1988 THERMAL/ACOUSTIC INSULATION BARRIER MATERIAL: POLYIMIDE FOAM
MIL T 24487 : A TILE, RUBBER VIBRATION DAMPING, TYPE MIRL NO. 3
MIL-C-87160 Revision A:1988 COAT, WOMAN'S (PANTS SUIT)
MIL T 8878 : D TURNBUCKLE, POSITIVE SAFETYING
MIL-DTL-48683 Revision B Interim Revision:2004 CARTRIDGE 40 MM PRACTICE - TP M918 - PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING
MIL-C-87064 Revision B:1992 CLOTH, DENIM, COTTON/POLYESTER
MIL-T-24747 Base Document:1991 TECHNICAL REPAIR STANDARDS (TRS) MANUAL; PREPARATION OF
SAE AS 5861 : 2015 RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, STATIC GLAND
MIL-DTL-28791 Revision D:2016 ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL-DTL-19491 Revision J:2014 SEMICONDUCTOR DEVICES, PACKAGING OF
MIL M 62338 : A MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF
MIL-V-81356 Revision B:1992 VALVE, FUEL SYSTEM PRESSURIZATION AND VENT
ZZ-G-710 Revision B:1993 GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS
SAE AS 7330 : 2012 RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT STEEL PROCUREMENT SPECIFICATION FOR
SAE AMS 4751 : 2017 TIN - LEAD EUTECTIC 63SN - 37PB
SAE AS 1710 : 2014 COUPLING, FUEL, FLEXIBLE, VARIABLE CAVITY, THREADED TYPE WITH FERRULES
SAE AS 7228 : 2015 RIVETS, STEEL, CORROSION RESISTANT 18CR-9NI, SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR
SAE AS 7768 : 2016 LIGHT, DESK, AIRCRAFT
SAE AS 7473 : 2018 BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR
SAE AS 5782 : 2015 RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, UN-CUT, FOR USE IN AS4716 GLANDS
SAE AS 23190 : 2015 WIRING, POSITIONING, AND SUPPORT ACCESSORIES
SAE MA 1943 : 2012 NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC
SAE AS 5860 : 2014 RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, STATIC GLAND
SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
SAE AS 4108 : 2018 T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED
SAE AMS 3670/1 : 2004 UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES
SAE AMS 3806F : 2013 CLOTH, AIRPLANE, MERCERIZED COTTON, 80 POUNDS FORCE (356 N) BREAKING STRENGTH
SAE ARP 1953 : 2014 ACCEPTANCE TEST PROCEDURES AND STANDARDS TO ENSURE CLEAN FUEL SYSTEM COMPONENTS
MIL-STD-419 Revision E:2010 CLEANING, PROTECTING, AND TESTING PIPING, TUBING, AND FITTINGS FOR HYDRAULIC POWER TRANSMISSION EQUIPMENT
MIL-E-24269 Revision B:1988 EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE
DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
F-F-2790 Base Document:1991 FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION
MIL-STD-3003 Revision B:2007 VEHICLES, WHEELED: PREPARATION FOR SHIPMENT AND STORAGE OF
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-28731-19 Revision E:2004 Connector, Electrical, Rectangular Shield for 20, 38, 56, 90 or 120 Removable Contacts
MIL F 83798 : B FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-C-55442 Revision B:1985 CABLE ASSEMBLIES AND CORD ASSEMBLIES, PACKAGING OF
MIL-STD-107 Revision J:2001 PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE
MIL-I-24683 Revision A:1990 INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER
MIL-P-46843 Revision C:1989 PRINTED WIRING ASSEMBLIES PRODUCTION OF
MIL T 28800 : E TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR
DEFSTAN 00-970(PT0)/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
BB-E-2879 Revision A:2001 EXTINGUISHER, FIRE, CARBON DIOXIDE (CO[2]), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE
MIL-DTL-53126 Revision A:2012 POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR
MIL-DTL-45360 Revision J:2016 CARRIERS, PERSONNEL, FULL-TRACKED, ARMORED: M113A2 AND M113A3; MORTARS, SELF-PROPELLED: M106A2 (107MM), M125A2 (81MM) AND M1064, M1064A3 (120MM); SMOKE GENERATORS: M1059, M1059A3 AND M58; PROCESSING FOR STORAGE AND SHIPMENT OF
MIL-DTL-55507 Revision F:1997 SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT) PACKAGING OF
MIL V 5523 : D VALVE, RELIEF, HYDRAULIC PRESSURE
MIL-B-28658 Revision E:1991 BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE
MIL-DTL-28731-24 Revision D:2004 Connector, Electrical, Rectangular Shield, for 120 Removable Contacts
DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
ASTM F 1145 : 2005 Standard Specification for Turnbuckles, Swaged, Welded, Forged
MIL-DTL-24317 Revision B:2010 SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR
MIL V 7891 : E VALVE, OXYGEN FILLER, LOW AND PRESSURE
MIL-C-16290 Revision K:1991 CLOTH, MELTON, WOOL (MOTH PROOFED)
MIL-D-17650 Revision B:1988 DISK, VALVE, RUBBER, INSERT TYPE
MIL-C-48481 Revision C:1995 CIRCUIT CARD ASSEMBLY - FTS INPUT SIMULATER AND DL TEST
MIL-M-87113 Revision A:1993 MASK, OXYGEN, MBU-10/P
P-W-2891 Revision A:2002 WIPE SOLVENTS, EXEMPT AND NON-EXEMPT
MIL-M-19417 Revision D:1992 Mask Assemblies, Oxygen and Smoke, Full Face
SAE AMS 3831 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH
SAE AS 7234 : 2012 RIVETS, BLIND, CORROSION RESISTANT ALLOY 67 NI - 31 CU PROCUREMENT SPECIFICATION FOR
MIL-T-41834 Revision G:1990 TROUSERS, MEN'S POLYESTER & COTTON
SAE AMS 3652 : 2015 POLYTETRAFLUOROETHYLENE (PTFE) FILM, NON-CRITICAL GRADE
SAE MA 3399 : 2012 CLAMP - TUBE SUPPORT, SPRING CLIPS AND PTFE CUSHION PROCUREMENT SPECIFICATION FOR
SAE AS 81934 : 2016 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
SAE AMS 3826 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER RESIN IMPREGNATED, 1581 AND 7781 TYPE FABRIC
SAE AMS 3670 : 2003 POLYAMIDE-IMIDE BAR, ROD, & SHAPES, MOLDED OR EXTRUDED
MIL-C-12684 Revision D:1989 CANNON, 155 MM HOWITZER: M1A1 CANNON, 155 MM HOWITZER: M1A2
SAE AMS 1540 : 2015 CLEANER, THRUST REVERSER, WATER-BASE
MIL-G-16265 Revision F:1993 GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS)
MIL-DTL-197 Revision M:2016 PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES
MIL-C-0024196 Revision B:1991 CLEANING SYSTEMS, ULTRASONIC
SAE AS 5778 : 1997 COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR
MIL-C-24196 Revision A:1988 CLEANING SYSTEM, ULTRASONIC
MIL-STD-1904 Revision B:2016 Test Standards for Level A and Level B Packaging for Conventional Ammunition
SAE MA 4368 : 2018 NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC
MIL-C-5778 Revision D:1992 COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR
MIL P 24583 : B PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN
MIL-P-5994 Revision D:1972 PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR
MIL-A-27195 Revision A:1989 ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A
MIL-DTL-39028 Revision F:2013 CAPACITORS, PACKAGING OF
MIL-C-15104 Revision F:1991 Cloth, Coated, Flame Resistant, Berth and Bedding Cover (No S/S Document)
ASTM F 1567 : 1994 : R2001 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
ASTM F 1567 : 1994 : R2013 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
SAE AS 7211 : 2012 PIN, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100 PROCUREMENT SPECIFICATION
GG-T-356 Revision B:1998 Thermometer, Self Indicating, Liquid in Glass, Minimum, (Meteorological)
MIL-F-8839 Revision A:1988 FITTING, LUBRICATION, DRIVE TYPE
MIL-G-24716 Revision A:1993 GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND
MIL-DTL-75 Revision K:2007 ELECTRON TUBES, PACKAGING OF
SAE ARP 5812 : 2017 ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE
MIL-B-24781 Base Document:1993 BATTERBOARD SYSTEMS, SYNTHETIC
MIL E 24416 : B EXTINGUISHING SYSTEM, FIRE, FIXED, AQUEOUS POTASSIUM CARBONATE FOR RANGE AND EXHAUST SYSTEMS (SHIP AND SHORE USE)
SAE AMS 4997 : 1977 TITANIUM ALLOY POWDER 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY
MIL-A-27471 Revision C:1993 ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A
SAE AMS 3811 : 2016 Rods, Aramid Fiber, Polyester Resin Coated Pultrusion
SAE AMS P 29609 : 2016 POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC
MIL-T-62050 Revision B:1985 TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF
MIL-HDBK-2097 Revision A:1997 ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT
MIL-R-17882 Revision E:1993 REPAIR KIT, METALLIC PIPE AND GENERAL PURPOSE, DAMAGE CONTROL
MIL G 16356 : D GAGE, BOILER WATER, DIRECT READING
MIL L 58085 : A LIGHT, BEACON, ANTI COLLISION AIRCRAFT
MIL-I-24703 Base Document:1988 INSULATION, PIPE, POLYPHOSPHAZENE, SHEET AND TUBULAR
MIL-DTL-39032 Revision E:2000 RESISTORS, PACKAGING OF
SAE MA 7211 : 2012 PINS, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100, METRIC PROCUREMENT SPECIFICATION FOR
SAE AMS 3263 : 1997 SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE FOR AIRCRAFT STRUCTURES, FUEL RESISTANT WITH INTERMITTENT USE TO 400 MDCF (204 MDCC)
MIL-G-29635 Base Document:1990 GLOVES, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY
MIL-C-24916 Revision A:1991 CLOTH, CHAMBRAY, COTTON (FLAME RETARDANT TREATED)
MIL C 15370 : F COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR
SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
SAE AMS 3837 : 2016 Cloth, Type "S" Glass 181 Style Fabric, Finish No. HTS-904
SAE AMS1550B:1995(R2012) CLEANER, WATER BASE, AIRCRAFT INTERIOR HARD SURFACE MATERIALS
SAE AS7283B : 2012 GASKETS, TYPE 20 ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED CONTROLLED PERFORMANCE
SAE AS 21608 : 2012 FERRULE, SHIELD TERMINATING, CRIMP STYLE
SAE AS 39901 : 2012 BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH
ASTM F 2511 : 2005 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
SAE AMS 3668 : 2011 POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, PREMIUM GRADE, AS SINTERED
SAE AS 45909 : 2015 STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR
SAE AS 7236 : 2012 RIVETS, ALLOY, CORROSION AND HEAT RESISTANT 52CO-20CR-10NI-15W SOLUTION HEAT TREATED PROCUREMENT SPECIFICATION FOR
SAE AMS 3828 : 2016 GLASS ROVING, EPOXY RESIN PREIMPREGNATED, TYPE E GLASS
SAE AMS 3824 : 2013 CLOTH, GLASS, FINISHED FOR RESIN LAMINATES
SAE MA 2538 : 2015 GASKET, METAL C-RING SEAL NICKEL ALLOY, CORROSION AND HEAT RESISTANT, METRIC PROCUREMENT SPECIFICATION FOR
SAE AMS 2405E: 2013 ELECTROLESS NICKEL PLATING, LOW PHOSPHORUS
SAE AS 82819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES
GGG-G-521 Revision E:1988 GOGGLES, INDUSTRIAL, RESILIENT FRAME
SAE AS 7222 : 2013 ALUMINUM RIVETS, UNS A92117 2.5Cu - 0.3Mg (2117-T4) - PROCUREMENT SPECIFICATION
SAE AMS 3662 : 2015 POLYTETRAFLUOROETHYLENE FILM, GENERAL PURPOSE GRADE
NASA KSC C 123 : 2009 SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR
SAE AMS 3832 : 2016 ROVING, TYPE 'S-2' GLASS, EPOXY RESIN IMPREGNATED
MIL-HDBK-772 Base Document:1981 MILITARY PACKAGING ENGINEERING
SAE AMS 1431 : 2012 COMPOUND, SOLID RUNWAY AND TAXIWAY DEICING/ANTI-ICING
SAE AS 50571 B : 2016 LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR
O-S-635 Revision E:2007 SODIUM POLYPHOSPHATES, TECHNICAL
MIL-T-10646 Revision D:1988 Telescope, Straight: M90 Series, M90A2 and M90A3
SAE AMS 3653 : 2016 TUBING, ELECTRICAL INSULATION, STANDARD WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
MIL C 15730 : M COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
SAE AMS 2439 : 2000 SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, HARD DEPOSIT
MIL A 24533 : B ACTUATORS, ROTARY HYDRAULIC RACK AND PINION
SAE AMS 3686 : 2014 ADHESIVE, POLYIMIDE RESIN, FILM AND PASTE HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F)
SAE MAM 5401 : 2003 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB VACUUM MELTED, VACUUM CAST AS CAST
SAE AMS 1383 : 2007 OXIDE CONDITIONER, ALKALINE PERMANGANATE AIRCRAFT TURBINE ENGINE COMPONENTS
SAE AMS 1380 : 2007 SCALE CONDITIONER, ALKALINE, AIRCRAFT TURBINE ENGINE COMPONENTS
MIL-DTL-45585 Revision E Interim Revision:2004 Link, Cartridge - Metallic Belt, 40 Millimeter - M16A2
SAE AMS 1320 : 1995 REMOVER, DECAL ADHESIVE
MIL-T-87067 Revision C:1990 TROUSER, MEN'S, (ENLISTED, WHITE)
SAE AMS 3817 : 2016 NYLON BRAID, FLAT ELECTRICAL TYING RESIN COATED
MIL-T-47248 Revision A:1991 TAPE, PLASTIC, HEAT-SEALING, PERFORATED
SAE AMS 3906 : 2016 GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP
SAE AMS 7482 : 1995 STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED
MIL-B-87258 Base Document:1991 BAG, SLEEPING, ARCTIC SURVIVAL, PRESSURE/VACUUM PACKED
SAE AMS 3898 : 2014 INTERLEAF CARRIER MATERIAL, COMPOSITE TAPE OR BROADGOODS PAPER, 0.004 INCH (0.10 MM), PERFORATED
SAE AS 7232 : 2012 RIVETS, SOLID AND TUBULAR, NICKEL ALLOY CORROSION AND HEAT RESISTANT 74NI - 15.5CR - 8.0FE PROCUREMENT SPECIFICATION FOR
SAE AMS 3023 : 2017 FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL
SAE AS 81914 : 2016 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
SAE AMS 3829 : 2016 CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC, SOLUTION-ADDITION-TYPE PMR 15 POLYIMIDE RESIN IMPREGNATED
MIL-C-82243 Revision F:1993 COVERALLS, RADIOACTIVE CONTAMINANTS, PROTECTIVE
MIL-H-24460 Revision B:1988 HARNESS, SAFETY, AND LANYARDS, SAFETY AND WORKING
MIL T 5350 : E TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL V 87223 : 0 VALVE, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A
MIL-P-24503 Revision B:1991 PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING
MIL-M-85522 Revision A:1991 MONITOR, OXYGEN CRU-91/A
MIL-J-87035 Revision D:1994 JUMPER, MAN'S (BLUE, DRESS)
MIL-M-29460 Base Document:1990 MODULE, WATER PUMP (SIXCON)
MIL-E-24572 Revision B:1992 EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE)
MIL-G-5514 Revision G:1993 GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR
MIL-P-48494 Revision A:1995
SAE AMS 3729 : 2014 EPOXY RESIN MATRIX, THERMOSETTING MODERATE TEMPERATURE RESISTANT, UNFILLED
MIL-STD-1388-2 Revision B:1991 DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD
MIL-I-27304 Revision E:1977 INDICATOR, RATE OF FLOW
MIL-C-14385 Revision D:1991 CANNON, 40 MM DUAL AUTOMATIC GUN: M2A1 AND CLIP, CHARGER: M3
MIL-C-24910 Revision B:1992 CLOTH, TROPICAL: POLYESTER AND WOOL
MIL-S-24950 Base Document:1989 SHIRT, MANS, DRESS WHITE, LONG SLEEVE
MIL W 3459 : D WIPER, WINDOW, ELECTRIC, PENDULUM TYPE (MARINE SERVICE, HEAVY DUTY)
MIL-C-24927 Revision A:1991 CLOTH, TWILL, POLYESTER/COTTON (DURABLE PRESS)
MIL-I-26382 Revision C:1994 INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-4 AND A/A24J-8
MIL T 5882 : D TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1
MIL C 24712 : A COATINGS, POWDER (METRIC)
MIL I 5184 : B INDICATOR, POSITION
MIL-D-8804 Revision B:1993 DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-STD-1359 Revision B:1987 CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT
MIL-G-24717 Base Document:1989 GASKET, SHEET, REFRIGERATION, NON-ASBESTOS
MIL-B-24692 Revision A:1993 BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC)
SAE AMS 3847 : 1994(S2016) CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F)
MIL R 28750 : C SUPP 1 RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING
MIL-H-16384 Revision E:1988 HYDROMETER SETS AND PARTS, SYRINGE, LEAD-ACID STORAGE BATTERY TESTING
SAE AS 7246 : 2012 INSERTS, SCREW THREADS, HELICAL COIL 72NI-15.5CR-0.95(CB+TA)-2.5TI-0.70AL-7.0FE CORROSION AND HEAT RESISTANT ALLOY PROCUREMENT SPECIFICATION FOR
MIL-H-10056 Revision F:1995 HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR
SAE AS 8942 : 2014 BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING
MIL G 24696 : B GASKET, SHEET, NON-ASBESTOS
SAE AS 81819 : 2010 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR
MIL-S-12227 Revision F:1989 Suit, Toxicological Agents Protective Cover, Cooling (No S/S Document)
SAE AMS 3845 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE ADDITION CURE POLYIMIDE-RESIN-IMPREGNATED
MIL-C-29627 Base Document:1990 COVERALLS, CATAPULT CREWMEN'S (FLAME RESISTANT)
MIL-C-5584 Revision D:1988 CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE
MIL C 24758 : 0 CONDUIT, FLEXIBLE, WEATHERPROOF & ASSOCIATED FITTINGS
GEIASTD0007B:2013 LOGISTICS PRODUCT DATA
MIL-R-48628 Revision A:1993 RACK, STORAGE, SMALL ARMS: M14
MIL I 6839 : C INDICATOR, POSITION, LANDING GEAR
MIL-L-24943 Revision A:1993 LINER, FIREMAN'S COAT, QUILTED
MIL V 7560 : C VALVE ASSEMBLY, OXYGEN CYLINDER, BAILOUT
SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
SAE AMS 3628 : 2011 PLASTIC EXTRUSIONS AND MOLDINGS, POLYCARBONATE, GENERAL PURPOSE
MIL-E-24743 Base Document:1991 ENCLOSURE, COMMON ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION
SAE AS 19692 : 2016 Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump
MIL-DTL-28731-38 Revision A:2004 Connector, Electrical, Rectangular Shield, for use with MIL-DTL-28731/32
MIL-M-63221 Revision A:1992 MORTAR, 60MM, M224 (WITHOUT M64 SIGHT UNIT)
AFGS-87234 Revision A:1991 PERSONAL PROTECTIVE EQUIPMENT, AIRCREW
MIL-STD-1660 Revision A:2008 DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS
SAE AMS 1382 : 2007 OXIDE REMOVER COMPOUND, ACIDIC AIRCRAFT TURBINE ENGINE COMPONENTS
MIL-DTL-28731-37 Revision A:2004 Connector, Electrical, Rectangular Shield, for Female Rectangular 165 Removable Type Contacts
MIL-T-24944 Base Document:1989 TROUSERS, FLIGHT DECK, CREWMEN'S
SAE AS 7210 : 2012 PINS, COTTER, STEEL, CORROSION RESISTANT UNS S30200 PROCUREMENT SPECIFICATION FOR
MIL S 83734 : F SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR
SAE AS 85720 : 2018 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR
SAE AS 13591 : 2001 CLEANING METHODS &PROCEDURES FOR BREATHING OXYGEN EQUIPMENT
SAE ARP 1616 : 2017 SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS
SAE AMS 2680 : 2010 ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS
SAE AMS 3710 : 2014 SANDWICH STRUCTURES, GLASS FABRIC-RESIN, LOW PRESSURE MOLDED, HEAT RESISTANT
SAE AMS 3844 : 2016 Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE AMS 1526 : 2008 CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE
SAE AS 7454 : 2016 BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT 135000 PSI TENSILE STRENGTH, NORMALIZED AND TEMPERED, ROLL THREADED
SAE AS 7458 : 2016 STUDS, STEEL, LOW ALLOY, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135000 PSI TENSILE STRENGTH
SAE AS 7233 : 2012 RIVETS, SOLID, UNS N04400, CORROSION RESISTANT 67NI - 31CU PROCUREMENT SPECIFICATION FOR
SAE AS 85421 : 2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR
SAE AMS 3377 : 2015 SEALING COMPOUND, ELECTRICALLY CONDUCTIVE CORROSION INHIBITING
SAE AMS 3359 : 2016 SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY
SAE AMS C 7438 : 2014 CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION
SAE AMS 1385 : 2004 COMPOUND, HOT CARBON AND PAINT REMOVER AIRCRAFT TURBINE ENGINE COMPONENTS
SAE ARP 4379 : 2016 AEROSPACE - ACCUMULATOR, HYDRAULIC, CYLINDRICAL, PISTON SEPARATED
SAE AS 81703 : 2012 CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING
SAE AMS 3812 : 2016 RODS, GLASS FIBER, POLYESTER RESIN, LOADED PULTRUSION
SAE AMS 3705 : 2014 EPOXY RESIN, CYCLOALIPHATIC LIQUID
SAE MAM 4778 : 2003 NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 980 TO 1040 DEGREE C SOLIDUS-LIQUIDUS RANGE
ASTM F 2511 : 2005 : EDT 1 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
SAE AMS 3666 : 2012 POLYTETRAFLUOROETHYLENE (PTFE) SHEET, GLASS CLOTH REINFORCED
SAE AS 4417A : 2014 NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION
SAE AMS 3091 : 2014 MOLD RELEASE AGENT
NASA KSC E 165 : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
NASA MSFC SPEC 3635 : 2012 PYROTECHNIC SYSTEM SPECIFICATION
NASA JSC 66491 : 2013 STANDARD FOR JSC LEAD-FREE CONTROL PLANS (LFCP)
MIL-DTL-2156 Revision D:2010 CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING
MIL-P-17171 Revision E:1990 PLASTIC, LAMINATE, DECORATIVE, HIGH PRESSURE
SAE AS 7229 : 2013 RIVETS, STEEL, CORROSION AND HEAT RESISTANT, 18CR - 10.5NI - 0.70(CB+TA), SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR
SAE AMS 3612 : 2016 POLYESTER FILM, ELECTRICAL GRADE, GENERAL PURPOSE
SAE AMS 3803 : 2016 WIPES, COTTON, LOOSELY WOVEN
GGG-T-2761 Base Document:1991 TONGS, MATERIAL LIFTING, PIPE
SAE AS7245:2012 INSERTS, SCREW THREAD, HELICAL COIL 19CR-9.2NI, CORROSION RESISTANT STEEL, PROCUREMENT SPECIFICATION FOR
MIL F 87260 : 0 FOAM MATERIAL, EXPLOSION SUPPRESSION, INHERENTLY ELECTRICALLY CONDUCTIVE, FOR AIRCRAFT FUEL TANK & DRY BAY AREAS
SAE AMS 3692 : 2014 ADHESIVE COMPOUND, EPOXY RESIN, HIGH TEMPERATURE APPLICATION
MIL C 4710 : D CASE SET, TRANSPORT AND STORAGE
MIL-C-87074 Revision B:1991 CLOTH, TWILL, ACETATE
MIL I 25689 : A NOTICE 1 INDICATOR, ELECTRICAL TACHOMETER
MIL-B-87986 Base Document:1989 BEAD BREAKER, PNEUMATIC TIRE
MIL-V-3 Revision E:1994 VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF
MIL C 83867 : B CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE
SAE AMS 3683 : 2017 TUBING, IRRADIATED MODIFIED FLUOROPOLYMER PLASTIC, ELECTRICAL INSULATION FLAME RESISTANT, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO
MIL-R-43838 Revision B:1993 RELEASE, CARGO PARACHUTE, AIRDROP, M-2
MIL-R-83248 Revision C:1994 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
MIL-V-24690 Base Document:1987 VEST INTEGRATED DIVERS
MIL G 2857 : B GLASS, HEAT TREATED, GLAZING, RECTANGULAR (FOR BRIDGE WINDOWS)
MIL-R-11521 Revision G:1993 RING, EXPANSION, HOSE, BRASS
MIL S 19491 : G SEMICONDUCTOR DEVICE, PACKAGING OF
SAE AS 5781 : 2015 RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, SCARF-CUT, FOR USE IN AS4716 GLANDS
MIL C 24788 : 0 COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH
MIL-DTL-55661 Revision C:2002 CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837( )/U
MIL-C-48480 Revision C:1995 CIRCUIT CARD ASSEMBLY - LOGIC AND REFERENCE
MIL-DTL-28786 Revision D:2014 SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
PPP-P-40 Revision C:1998 PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY
MIL M 7793 : F METER, TIME TOTALIZING
MIL-B-22036 Revision D:1991 BRIDLE AND PENDANT ASSEMBLIES, AIRCRAFT LAUNCHING
GG-M-2742 Base Document:1991 METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM
SAE AS 7455 : 2016 BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT HARDENED AND TEMPERED, ROLL THREADED
MIL R 6855 : E RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES
MIL-V-27296 Revision C:1993 VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION
SAE AMS 3670/3 : 2004 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES, 12% GRAPHITE - 3% POLYTETRAFLUOROETHYLENE FILLED
MIL M 24784 : NOTICE 1 MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS
MIL T 38230 : B (1) TRANSMITTER, PRESSURE TRU 66/A OIL, VARIABLE RELUCTANCE
MIL-P-28584 Revision B:1989 PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR CONDENSATE RETURN LINES
MIL-I-6514 Revision B:1988 INDICATOR, OIL PRESSURE, 0-200 PSI, 320 DEGREE, TYPE B-9C
SAE AMS 3865 : 2013 FILAMENTS, BORON - TUNGSTEN SUBSTRATE, CONTINUOUS
MIL R 83536 : SUPP 1 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY
MIL-L-3454 Revision G:1991 LIFE PRESERVERS, PACKAGING OF
MIL S 24749 : 0 STRAPS, ELECTRICAL GROUNDING (METRIC)
MIL-S-24700 Base Document:1988 STUFFING TUBES FOR REFERENCE ELECTRODES, IMPRESSED CURRENT CATHODIC PROTECTION (METRIC)
MIL-H-24729 Base Document:1990 HARNESS, SAFETY, SWIMMERS
MIL-T-24180 Revision A:1988 TILE, RUBBER, UNDERWATER ACOUSTIC DECOUPLER
MIL R 39032 : D RESISTOR, PACKAGING OF
MIL-J-29634 Base Document:1992 JERSEY, FLIGHT DECK CREWMANS (FLAME-RESISTANT)
MIL G 22050 : D GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES
MIL-PRF-55585 Revision G:1997 ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF
MIL-I-24768 Base Document:1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR
SAE AMS 1386 : 2004 COMPOUND, SILICONE RUBBER REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATIONS
MIL-STD-3028 Base Document:2009 JOINT MODULAR INTERMODAL CONTAINER
SAE AS 7456 : 2016 STUDS, STEEL, LOW ALLOY, HEAT TREATED, ROLL THREADED
SAE AMS 2664 : 2014 BRAZING, SILVER, FOR USE UP TO 800 DEGREES F (427 DEGREES C)
MIL-DTL-81997 Revision D:2004 POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC-PROTECTIVE, TRANSPARENT
ASTM F 1567 : 1994 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
MIL-DTL-62327 Revision B:1985 CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC)
MIL P 24790 : 0 PACKING MATERIAL, BRAIDED, NON ASBESTOS
MIL-P-22581 Revision C:1991 PLASTIC SHEET, VIBRATION DAMPING (TYPE ML-D2)
SAE AMS 3020 : 2013 OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING
MIL-B-63354 Revision A:1987
MIL-B-85584 Revision B:1995 BATTERY RELAY CONTROL UNIT, AIRCRAFT
MIL-DTL-25421 Revision C:2009 Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated
MIL-HDBK-87234 Base Document:1976 PERSONAL PROTECTIVE EQUIPMENT, AIRCREW
MIL-C-14384 Revision D:1989 CANNON, 105 MM HOWITZER, M2A2
MIL-G-15342 Revision E:1987 GASKETS, METALLIC, SPIRAL WOUND FOR BOILERS
SAE AS 4491 : 2012 PLASTIC DISPOSABLE CARTRIDGE, PLUNGER, NOZZLES AND CARTRIDGE ASSEMBLY
MIL M 19863 : D MOUNT, RESILIENT, TYPE 5B5.000H
MIL-S-24340 Revision A:1988 SEALING COMPOUND, DECK, POLYURETHANE (POLYETHER BASE)
MIL-HDBK-263 Revision B:1994 ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT
MIL-M-55565 Revision C:1988 MICROCIRCUITS, PACKAGING OF
MIL I 6856 : C INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH
MIL-DTL-7905 Revision H:2003 CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI
MIL-P-236 Revision J:1992 PIPE, CULVERT, NESTABLE
MIL-I-38391 Base Document:1965 INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE)
MIL-L-00757 Revision B:1994 LEAD STYPHNATE, NORMAL
MIL V 87255 : 0 VALVE, PRESSURE, ANTI-G SUIT, HIGH FLOW
MIL-STD-758 Revision C:1990 PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS
MIL G 1149 : C GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
SAE AMS 3846 : 2013 CLOTH, QUARTZ, FINISHED FOR RESIN LAMINATES
SAE AS 55151 : 2001 PUMP, HYDRAULIC, RAM, HAND DRIVEN
ASTM F 1145 : 2005 : R2017 Standard Specification for Turnbuckles, Swaged, Welded, Forged
SAE AMS 3867 : 2016 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED
SAE AMS 1374 : 2004 REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE
SAE AS 7225 : 2015 RIVETS, CARBON STEEL, PROCUREMENT SPECIFICATION FOR
SAE AMS 3895 : 2016 BROADGOODS AND TAPE, CARBON FIBER-EPOXY RESIN IMPREGNATED MULTI-PLY, UNIFORM FIBER
SAE AMS 1448 : 2014 SAND, AIRPORT SNOW AND ICE CONTROL
SAE AMS 3267 : 1992 SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES
SAE AMS 3849 : 2016 CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED
SAE AS 7472 : 2015 BOLTS AND SCREWS, STEEL, CORROSION RESISTANT 125000 PSI TENSILE STRENGTH ROLL THREADED
SAE AS 7461 : 2015 BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR
SAE AMS 3704 : 2016 ADHESIVE, CONTACT, POLYCHLOROPRENE (CR) RUBBER, RESIN MODIFIED
SAE AMS 3647 : 2015 POLYFLUOROETHYLENE PROPYLENE FILM AND SHEET
SAE AMS 1539:1996(S2018) CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER
SAE AS 7207 : 2012 SPRING PINS, TUBULAR, SLOTTED CORROSION AND MODERATE HEAT RESISTANT STEEL PROCUREMENT SPECIFICATION FOR
SAE AMS 2441 : 2000 SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, LOW HARDNESS DEPOSIT
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
SAE AMS 3890 :2011(S2016) GRAPHITE YARN, NON-STRUCTURAL - 5 PLY YARN, 720 FILAMENTS
MIL-C-29107 Revision C:1989 COAT, MANS POLYESTER/WOOL SUMMER
MIL A 5503 : E ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
SAE AMS 1371 : 2007 COMPOUND, RUST REMOVER, SOLID/POWDER AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD
MIL-HDBK-701 Revision C:1989 BLOCKING, BRACING AND SKIDDING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE
MIL-R-23074 Revision C:1990 RUBBER TILE, RUBBER-AIR-LEAD-TYPE (RAL)
MIL-T-8598 Revision B:1990 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, FLUSH-MOUNTED, FREE AIR
MIL-I-25120 Revision C:1993 INDICATOR, INSTRUMENT LANDING, AIRPORT RUNWAY
MIL-STD-648 Revision E:2016 Specialized Shipping Containers
MIL-PRF-23199-1 Revision B:2010 PACKAGING, PACKING AND MARKING (PP&M) REQUIREMENTS FOR INSTRUMENTATION AND CONTROL EQUIPMENT
MIL-V-83271 Revision B:1992 VEST, SURVIVAL, MESH NET, SRU-21/P
MIL-S-47129 Revision A:1988 SILICON DIOXIDE, MICROFINE
MIL-I-25479 Revision A:1987 INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5
MIL-C-24756 Base Document:1990 CURTAINS & BLANKETS, SMOKE, PORTABLE
MIL-F-62668 Base Document:1989 FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT
MIL C 55330 : B CONNECTORS, PREPARATION FOR DELIVERY OF
MIL-W-44027 Revision A:1980 WEDGE KIT, RAMP BUNDLE DELIVERY SYSTEM, C-130 AIRCRAFT
MIL-T-26609 Revision C:1994 TRANSMITTER, POSITION
MIL-T-45542 Revision D:1990 TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF
SAE AMS 1378 : 1995 COMPOUND, CARBON SOIL AND PAINT REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION
MIL-R-29583 Base Document:1992 RADIO SET
MIL-I-25482 Revision D:1993 INDICATOR, ENGINE TESTING
MIL-C-23952 Revision C:1992 CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM
MIL-C-31003 Base Document:1992 COVERALLS, UTILITY
SAE AMS 3913 : 2014 RADOME, FOAM SANDWICH, HOT-MELT, ADDITION-TYPE POLYIMIDE
SAE AMS 1534 : 2013 CLEANER, AIRCRAFT GLASS WINDOW
MIL-P-4861 Revision C:1991 PACKING, PREFORMED, RUBBER PACKAGING OF
ASTM D 4169 : 2016 : REDLINE Standard Practice for Performance Testing of Shipping Containers and Systems
SAE AMS 1387B : 2004(S2018) REMOVER, ANTI GALLING COMPOUND, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION
MIL A 5498 : D ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT
MIL-I-27672 Revision B:1987 INDICATOR, POSITION ALU-4/1, HORIZONTAL STABILIZER
MIL-A-27670 Revision D:1994 AMPLIFIER-INDICATOR GROUP, INDICATED AIRSPEED A/A24G-10
MIL-A-83212 Revision A:1976 ALTIMETER, PRESSURE AAU-27/A
SAE AMS 2468 : 1999 HARD ANODIC COATING TREATMENT OF ALUMINUM ALLOYS
SAE AMS 3085 : 2016 FLUID, REFERENCE FOR TESTING AS5780 HPC CLASS (POLYOL) RESISTANT MATERIAL (ALSO KNOWN AS EASTMAN REFERENCE OIL 300)
MIL-H-82244 Revision F:1993 HOOD, RADIOACTIVE CONTAMINANTS, PROTECTIVE
MIL-I-7721 Revision D:1992 INDICATOR, VERTICAL SPEED, 3-INCH
MIL D 17951 : E DESK COVERING, LIGHTWEIGHT, NONSLIP, SILICON CARBIDE PARTICLE COATED FABRIC FILM, OR COMPOSITE AND SEALING COMPOUND
SAE AMS 7295 : 1993 RADIOGRAPHIC FILM AND PAPER, INDUSTRIAL GRADE
SAE AS 22145 : 2012 ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448)
MIL-P-116 Revision J:1988 PRESERVATION, METHODS OF
SAE AMS 3728 : 2014 EPOXY CRESOL NOVOLAC RESIN LOW MOLECULAR WEIGHT
MIL-STD-31000 Revision A:2013 Technical Data Packages
MIL-C-31002 Base Document:1992 CAP, GARRISON, MANS (COAST GUARD)
MIL P 7788 : F PANEL, INFORMATION INTEGRALLY ILLUMINATED
MIL I 27189 : D INDICATOR, PRESSURE OIL
MIL-I-27673 Revision C:1993 INDICATOR, TRUE AIRSPEED AVU-15/A
MIL-I-5914 Revision E:1993 INDICATOR, RATE OF FLOW, FUEL TYPE EFU 24/A AND TYPE EFU 25/A
MIL-C-24915 Revision A:1991 CLOTH, DENIM, COTTON (FLAME RETARDANT TREATED)
MIL-DTL-13931 Revision J:1999 Cannon: General Specification for
SAE AMS 2467 : 2016 HARD ANODIC COATING OF MAGNESIUM ALLOYS ALKALINE TYPE, HIGH VOLTAGE
SAE AS 7949 : 2004 BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD
SAE AMS 1527 : 2014 CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING
MIL-L-24778 Base Document:1992 LIFE PRESERVER, UTILITY, AUTO INFLATABLE, MK 5, MOD 0
MIL-T-38350 Revision D:1992 TROUSERS, PARARESCUE CWU-15/P
MIL-I-27848 Revision B:1994 INDICATOR, HORIZONTAL SITUATION AQU-4/A
MIL-L-85314 Revision A:1983 LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR
MIL-D-51091 Revision J:1986 DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500-GALLON, M12A1
MIL-I-5415 Revision C:1987 INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR
MIL-S-70344 Base Document:1990 SHIM, LAMINATED - GENERAL SPECIFICATION FOR
MIL-R-87017 Revision B:1991 RIBBON, POLYESTER, GROSGRAIN (CG)
MIL C 7554 : F CONTAINER KIT, AIRDROP
MIL D 83753 : NOTICE 2 DISPENSER, BOMB, TYPE SUU-21/A
MIL-E-24715 Base Document:1989 EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211)
EIA 836 CD : B2010(R2015) CONFIGURATION MANAGEMENT DATA EXCHANGE AND INTEROPERABILITY
RR-C-271 Revision G:2016 CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL
MIL-R-5049 Revision D:1989 RING, WIPER, PISTON ROD
MIL-T-24940 Revision A:1993 TROUSERS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY
MIL-C-5414 Revision G:1993 COMPUTER, AIR NAVIGATION DEAD RECKONING TYPE MB 4A AND TYPE CPU 26A/P
MIL-C-24918 Revision B:1992 COAT, ALL-WEATHER, MAN'S, WITH REMOVABLE LINER
MIL-T-5583 Revision C:1987 Transmitter, Position, 28 Volts DC
MIL-C-2202 Revision H:1990 COVERALLS, MENS COTTON SATEEN
MIL-C-87052 Revision B:1990 CLOTH, TWILL, POLYESTER, WHITE
MIL C 882 : E CLOTH, DUCK, COTTON OR COTTON POLYESTER BLEND, SYNTHETIC RUBBER,IMPREGNATED, LAMINATED, OIL RESISTANT
MIL S 28786 : B SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
MIL-B-83183 Revision B:1987 BARRIER, AIRCRAFT ARRESTING
SAE MAM 2410 : 2000 PLATING, SILVER, NICKEL STRIKE, HIGH BRAKE
MIL-G-21610 Revision C:1989 GASKETS, HEAT EXCHANGER, VARIOUS CROSS SECTION RINGS, SYNTHETIC RUBBER
MIL-DTL-438 Revision C:2010 WIRE; PRIMER, ELECTRICAL
MIL C 7115 : F CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-A-47284 Revision A:1991 ADHESIVE, EPOXY RESIN BASE
MIL-C-17620 Revision F:1990 Crown, Service Cap (Man\'s) (No S/S Document)
MIL-P-24764 Base Document:1991 POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR
MIL-I-26299 Revision G:1990 INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED
MIL-T-6598 Revision F:1994 TRANSMITTER, RATE OF FLOW, FUEL, SYNCHRO STYLE TYPE J 6A
MIL V 25961 : F VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A
MIL-DTL-6279 Revision M:2003 PARKA, EXTREME COLD WEATHER, TYPE N-3B
MIL-V-85603 Base Document:1989 VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR
MIL-DTL-28875 Revision C:2012 Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
MIL B 1163 : A BARS, FLINDERS
MIL T 31000 : 0 TECHNICAL DATA PACKAGES - GENERAL SPECIFICATION FOR
MIL-I-24391 Revision C:1990 INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE
MIL-W-5013 Revision L:1991 WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-HDBK-284-1 Base Document:1992 INTERACTIVE COURSEWARE (ICW) FOR MILITARY TRAINING, MANAGERS GUIDE FOR DEVELOPMENT, ACQUISITION & MANAGEMENT OF
MIL DTL 46709 : F HOWITZER, MEDIUM, SELF-PROPELLED: 155-MM, M109A2, M109A3, M109A4, AND M109A5; PROCESSING FOR STORAGE AND SHIPMENT OF
MIL-L-24942 Revision A:1993 LINER, FIREMAN'S TROUSER, QUILTED
MIL L 27546 : D LINER, FLYER'S, JACKET AND LINER, FLYER'S, TROUSERS, CWU-9/P
MIL-P-29609 Base Document:1995 POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC
SAE AS 81824 : 2016 SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT
MIL-STD-1905 Revision A:1992 DESIGN AND TEST REQUIREMENTS FOR LEVEL B AND LEVEL C AMMUNITION PACKAGING
SAE AMS 3679 : 2015 INSULATION, THERMAL, CERAMIC FIBER
SAE AMS1547:2008 CLEANER, ANODIC, ELECTROLYTIC, ALKALINE, FOR STEEL, TANK TYPE
SAE AS 83519 : 2015 SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR
SAE AMS 2444 : 2011 COATING, TITANIUM NITRIDE, PHYSICAL VAPOR DEPOSITION
SAE AMS 3661 : 2015 POLYTETRAFLUOROETHYLENE (PTFE) FILM, PREMIUM GRADE
SAE AMS 3714 : 2013 CORE, OVEREXPANDED HONEYCOMB, POLYAMIDE PAPER BASE, PHENOLIC COATED
SAE AMS R 83248 : 2005 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
SAE AS 83819 : 2013 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C)
SAE AMS 3529 : 2015 PLASTIC SHEET AND FILM, VINYL COPOLYMERS, UNPLASTICIZED
SAE AS 81582 : 2017 CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR
MIL-STD-1568 Revision D:2015 Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
SAE AS 6224 : 2015 WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT
SAE AS 7220A : 2017 ALUMINUM RIVETS, UNS A91100, 99AL (1100-H14)
SAE AMS 3892 : 2016 FIBERS, CARBON, TOW AND YARN, FOR STRUCTURAL COMPOSITES
SAE AMS 3827 : 2016 Cloth, Type "E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant
SAE AMS3617F : 2014 POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS
SAE AMS HH G 101 : 2014 GASKET, METALLIC-ENCASED
SAE AS 81820 : 2014 BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION
SAE AMS 1541 : 2005 CLEANER, FUEL DROP TANK, WATER-SOLUBLE
ASTM F 2511 : 2005 : R2013 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

MIL D 6054 : F DRUM, METAL - SHIPPING AND STORAGE
MIL-DTL-197 Revision M:2016 PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES
MIL-STD-1660 Revision A:2008 DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS
MIL-STD-648 Revision E:2016 Specialized Shipping Containers
MIL-PRF-6081 Revision E:2014 LUBRICATING OIL, JET ENGINE
PPP-C-96 Revision E:1992 CAN, METAL, 28 GAGE AND LIGHTER
MIL-C-9897 Revision C:1992 CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS]
MIL-C-3774 Revision B:1991 CRATE, WOOD, OPEN 12,000 AND 16,000 POUND CAPACITY
MIL-DTL-39028 Revision F:2013 CAPACITORS, PACKAGING OF
ASTM D 4169 : 2016 : REDLINE Standard Practice for Performance Testing of Shipping Containers and Systems
MIL-DTL-28786 Revision D:2014 SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
MIL-PRF-81705 Revision E:2009 Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
ASTM D 5118/D5118M : 2015 : REDLINE Standard Practice for Fabrication of Fiberboard Shipping Boxes
MIL-DTL-12000 Revision K:2012 CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF
MS27684 Revision C:1987 DRUM, METAL SHIPPING AND STORAGE 3 TO 12 GALLONS
MIL-PRF-46170 Revision E:2013 HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544
MIL-P-149 Revision D:1984 PLASTIC COATING COMPOUND, STRIPPABLE [HOT DIPPING]
MIL-G-81559 Revision C:1984 GYROSCOPE ASSEMBLIES ATTITUDE - DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT PACKAGING OF
MIL-D-3464 Revision E:1987 DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION
MIL-STD-758 Revision C:1990 PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS
MIL-W-10430 Revision D:1994 WELDING RODS AND ELECTRODES, PACKAGING OF
ASTM D 6880 : 2005 Standard Specification for Wood Boxes
MIL-PRF-11264 Revision F:2010 CONTAINER: SHIPPING, REUSABLE-FOR TANK-AUTOMOTIVE ENGINES, TRANSMISSIONS, DIFFERENTIALS, TRANSFERS, FINAL DRIVES, DRIVE AXLES, AND SIMILAR ASSEMBLIES
A-A-1249 Revision A:1993 PAPER, WRAPPING, TISSUE
MIL-DTL-2845 Revision E:1999 PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF
PPP-C-850 Revision D:1964 CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES)
MIL-PRF-7808 Revision L:1997 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
MIL-D-16791 Revision G:1990 DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC)
MIL-PRF-3150 Revision E:2008 LUBRICATING OIL, PRESERVATIVE, MEDIUM
PPP-B-566 Revision E:1974 BOX, FOLDING, PAPERBOARD
MIL-D-6055 Revision D:1987 DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES]
MIL-STD-290 Revision H:2013 PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS
MIL B 22020 : D BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED
MIL-C-3993 Revision C:1962 COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF
MIL-P-6063 Revision B:1978 PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR
MS27683 Revision C:1987 DRUM, METAL SHIPPING AND STORAGE 16 TO 80 GALLONS
MIL-C-6529 Revision C:1958 CORROSION PREVENTIVE, AIRCRAFT ENGINE
MIL-PRF-46002 Revision D:2010 PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED
ASTM D 996 : 2016 : REDLINE Standard Terminology of Packaging and Distribution Environments
MIL-PRF-3420 Revision H:2008 WRAPPING MATERIALS, VOLATILE CORROSION INHIBITOR TREATED, OPAQUE
MIL-P-19644 Revision C:1970 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)
PPP-T-495 Revision B:1974 TUBES, MAILING, AND FILING
MIL-DTL-39032 Revision E:2000 RESISTORS, PACKAGING OF
MIL-PRF-131 Revision K:2005 BARRIER MATERIALS, WATERVAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE
ASTM D 4279 : 1995 Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods
MIL-C-16555 Revision D:1975 COATING COMPOUND, STRIPPABLE, SPRAYABLE
MIL P 53030 : A PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE
MIL-PRF-121 Revision G:2001 BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE
A-A-203 Revision C:1996 PAPER, KRAFT, UNTREATED
MIL B 46506 : D BOXES, AMMUNITION PACKING, WOOD, WIREBOUND
PPP-C-1797 Revision A:1982 CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM
MIL-DTL-117 Revision H:2001 BAGS, HEAT-SEALABLE
MIL-STD-3010 Revision B:2008 Test Procedures for Packaging Materials and Containers
MIL-PRF-23199 Revision E:1997 PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS
PPP-C-795 Revision D:1994 Cushioning Material, Closed Cell Flexible, Plastic Film
MIL-DTL-6060 Revision E:2004 Bags, Watervaporproof, Heat-Sealable, Complex
MIL-PRF-26514 Revision G:1995 POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING
ASTM D 1974 : 1998 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
PPP-B-140 Revision C:1993 BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF
MIL-V-3 Revision E:1994 VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
MIL-DTL-2427 Revision J:2017 Box, Ammunition Packing: Wood, Nailed
MIL-PRF-81322 Revision G:2005 GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
PPP-B-676 Revision E:1992 BOXES SET-UP
MIL-DTL-75 Revision K:2007 ELECTRON TUBES, PACKAGING OF
MS24347 Revision F:1987 DRUM, METAL-SHIPPING AND STORAGE
MIL-DTL-17667 Revision E:2005 PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON-CORROSIVE)
ASTM D 6256/D6256M : 2016 : REDLINE Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
MIL-PRF-8188 Revision D:1997 CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
MIL-P-16789 Revision D:1986 PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF
MIL-PRF-83671 Revision B:1997 FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR
A-A-50177 Revision B:2007 PAPER, LENS
MIL-PRF-22191 Revision F:2008 Barrier Materials, Transparent, Flexible, Heat-Sealable
A-A-1507 Revision A:1993 CHIPBOARD
MIL-PRF-21260 Revision E:1998 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN
MIL-PRF-7870 Revision E:2015 LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142)
MIL-DTL-4 Revision M:1997 TIRES AND INNER TUBES (NON-AIRCRAFT); PACKAGING OF
PPP-B-1672 Revision E:2013 BOXES, SHIPPING, REUSABLE WITH CUSHIONING
PPP-D-729 Revision E:1977 DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS)
MIL-DTL-19491 Revision J:2014 SEMICONDUCTOR DEVICES, PACKAGING OF
MIL-DTL-55330 Revision C:2001 CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
MIL-W-5013 Revision L:1991 WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
A-A-3174 Base Document:1998 PLASTIC SHEET, POLYOLEFIN
MIL-B-43666 Revision D:1986 BOXES, SHIPPING, CONSOLIDATION
MIL-C-3131 Revision F:1995 CORDAGE, PACKING OF
MIL-PRF-32033 Revision A:2016 LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE (WATER-DISPLACING, LOW TEMPERATURE)
ASTM D 6251/D6251M : 2011 : REDLINE Standard Specification for Wood-Cleated Panelboard Shipping Boxes
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
MIL-PRF-6085 Revision E:2011 LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY
UU-B-36 Revision J:1970 BAGS, PAPER (GROCERS)
MIL-S-196 Revision D:1988 SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF
MIL-PRF-22019 Revision E:2006 BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED
MIL-STD-107 Revision J:2001 PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE
MIL-M-3184 Revision C:1986 MACHINERY: DECK AND VEHICLE MOUNTED WITH ASSOCIATED EQUIPMENT AND PROVISIONED (REPAIR PARTS) ITEMS: PACKAGING OF
A-A-3129 Revision C:2014 CUSHIONING MATERIAL, FLEXIBLE OPEN CELL PLASTIC FILM (FOR PACKAGING APPLICATIONS)
PPP-C-2020 Revision A:1994 CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF
PPP-B-1055 Revision B:1975 BARRIER MATERIAL, WATERPROOFED FLEXIBLE
MIL-DTL-81997 Revision D:2004 POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC-PROTECTIVE, TRANSPARENT
MIL-PRF-10924 Revision H:2008 GREASE, AUTOMOTIVE AND ARTILLERY
MIL-PRF-16173 Revision E:1993 CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION
SAE AS 26860 : 1998 INDICATOR, HUMIDITY, PLUG, COLOR CHANGE
QQ-A-1876 Base Document:1974 ALUMINUM FOIL
MIL-C-11796 Revision C:1986 CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION
A-A-59135 Base Document:1997 PACKAGING MATERIAL, SHEET
ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
MIL-P-130 Revision F:1985 PAPER WRAPPING, LAMINATED AND CREPED
DOD 5220.22M : 95 SUP1 CHANGE 1 INDUSTRIAL SECURITY MANUAL FOR SAFEGUARDING CLASSIFIED INFORMATION
MIL-E-17555 Revision H:1984 ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF
MIL-E-16298 Revision D:1989 ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF
A-A-1898 Revision D:2012 CUSHIONING MATERIAL, CELLULOSIC, PACKAGING
MMM-A-260 Revision C:1984 ADHESIVE WATER RESISTANT (FOR SEALING WATERPROOFED PAPER)
A-A-59136 Base Document:1997 CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK
ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
PPP-C-1120 Revision D:2012 CUSHIONING MATERIAL, UNCOMPRESSED BOUND FIBER FOR PACKAGING
NAS847:2012 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL
MIL-PRF-46010 Revision H:2013 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
PPP-B-585 Revision D:1992 BOX, WOOD, WIREBOUND
MIL-I-8574 Revision E:1982 INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF
MIL-C-104 Revision C:1992 CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED
MIL-STD-961 Revision E:2003 DEFENSE AND PROGRAM-UNIQUE SPECIFICATIONS FORMAT AND CONTENT

View more information
£17.08
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.