• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 16192:2011

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Characterization of waste. Analysis of eluates
Available format(s)

Hardcopy , PDF

Superseded date

03-04-2020

Language(s)

English

Published date

30-04-2012

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sample pretreatment
5 Blank determination
6 Interference
7 Selection of the suitable test method
8 Expression of results
9 Test report
Annex A (informative) - Validation of EN 12506:2003 and
        EN 13370:2003
Annex B (informative) - Additional validation data
Bibliography

Describes methods for the determination of the parameters pH, ammonium, AOX, As, Ba, Cd, Cl[-], easily liberatable CN[-], Co, Cr, Cr(VI), Cu, DOC/TOC, electrical conductivity, F[-], Hg, Mo, Ni, NO[2][-], Pb, phenol index, total S, Sb, Se, SO[4][2-], TDS, V and Zn in aqueous eluates for the characterization of waste.

This European Standard specifies methods for the determination of the parameters pH, ammonium, AOX, As, Ba, Cd, Cl-, easily liberatable CN-, Co, Cr, Cr(VI), Cu, DOC/TOC, electrical conductivity, F-, Hg, Mo, Ni, NO2-, Pb, phenol index, total S, Sb, Se, SO42-, TDS, V and Zn in aqueous eluates for the characterization of waste.

Committee
EH/4
DevelopmentNote
Supersedes BS EN 12506, BS EN 13370 & 10/30233988 DC. (04/2012)
DocumentType
Standard
Pages
36
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
EN 16192:2011 Identical

ISO 23913:2006 Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
EN ISO 17294-1:2006 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004)
EN ISO 14403 : 2002 WATER QUALITY - DETERMINATION OF TOTAL CYANIDE AND FREE CYANIDE BY CONTINUOUS FLOW ANALYSIS
ISO 14402:1999 Water quality Determination of phenol index by flow analysis (FIA and CFA)
EN 12457-2:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
EN 1483:2007 Water quality - Determination of mercury - Method using atomic absorption spectrometry
CEN/TS 14429:2005 Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition
EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
EN 27888 : 1993 WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY
ISO 11969:1996 Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique)
ISO 11083:1994 Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide
EN ISO 10304-3 : 1997 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997)
EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
EN ISO 15586 : 2003 WATER QUALITY - DETERMINATION OF TRACE ELEMENTS USING ATOMIC ABSORPTION SPECTROMETRY WITH GRAPHITE FURNACE
ISO/TR 13530:1997 Water quality Guide to analytical quality control for water analysis
EN 26777 : 1993 WATER QUALITY - DETERMINATION OF NITRITE - MOLECULAR ABSORPTION SPECTROMETRIC METHOD
EN 1484 : 1997 WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC)
ISO 10304-3:1997 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
ISO 11732:2005 Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection
ISO 15682:2000 Water quality Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
ISO 17852:2006 Water quality Determination of mercury Method using atomic fluorescence spectrometry
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
CEN/TS 14997 : 2006 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH-CONTROL
ISO 9965:1993 Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique)
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
EN 12457-4:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
ISO 8288:1986 Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 9297:1989 Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method)
ISO 6777:1984 Water quality — Determination of nitrite — Molecular absorption spectrometric method
EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006)
EN ISO 23913:2009 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006)
ISO 11885:2007 Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 17294-1:2004 Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 1: General guidelines
ISO 10304-1:2007 Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 6703-2:1984 Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide
ISO 6439:1990 Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation
ISO 13395:1996 Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
ISO 10359-1:1992 Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water
CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates
ENV ISO 13530 : DRAFT 1998 WATER QUALITY - GUIDE TO ANALYTICAL QUALITY CONTROL FOR WATER ANALYSIS
EN 13370:2003 Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F-
ISO 15586:2003 Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace
NEN 6604 : 2007 WATER QUALITY - DETERMINATION OF AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHO-PHOSPHATE, SULPHATE AND SILICATE BY A DISCRETE ANALYZER SYSTEM AND SPECTROPHOTOMETRIC DETECTION
ISO 7888:1985 Water quality — Determination of electrical conductivity
EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 14403:2002 Water quality Determination of total cyanide and free cyanide by continuous flow analysis
ISO 9562:2004 Water quality — Determination of adsorbable organically bound halogens (AOX)
ISO 22743:2006 Water quality Determination of sulfates Method by continuous flow analysis (CFA)
EN 12920:2006+A1:2008 Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions
EN 15002:2015 Characterization of waste - Preparation of test portions from the laboratory sample
EN ISO 15682 : 2001 WATER QUALITY - DETERMINATION OF CHLORIDE BY FLOW ANALYSIS (CFA AND FIA) AND PHOTOMETRIC OR POTENTIOMETRIC DETECTION
EN 12457-3:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
EN ISO 9562:2004 Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004)
ISO 7150-1:1984 Water quality — Determination of ammonium — Part 1: Manual spectrometric method
CEN/TS 14405 : 2004 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS)
ISO 10523:2008 Water quality — Determination of pH
EN 15216:2007 Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates
EN ISO 11969:1996 WATER QUALITY - DETERMINATION OF ARSENIC - ATOMIC ABSORPTION SPECTROMETRIC METHOD (HYDRIDE TECHNIQUE)
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
EN ISO 14402 : 1999 WATER QUALITY - DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA)
EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
ISO 17294-2:2016 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes
EN ISO 14911 : 1999 WATER QUALITY - DETERMINATION OF DISSOLVED LI+, NA+, NH4+, K+, MN2+, CA2+, MG2+, SR2+ AND BA2+ USING ION CHROMATOGRAPHY - METHOD FOR WATER AND WASTE WATER
EN ISO 17294-2:2016 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016)
ISO 14911:1998 Water quality Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography Method for water and waste water
EN ISO 13395 : 1996 WATER QUALITY - DETERMINATION OF NITRITE NITROGEN AND NITRATE NITROGEN AND THE SUM OF BOTH BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION

View more information
£218.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.