• There are no items in your cart

IEEE 141 : 1993

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
Withdrawn date

11-01-2023

Published date

04-29-1994

Chapter 1 - Overview
  1.1 Scope and general information
  1.2 Industrial plants
  1.3 Industry Applications Society (IAS)
  1.4 Professional registration
  1.5 Professional liability
  1.6 Codes and standards
  1.7 Handbooks
  1.8 Periodicals
  1.9 Manufacturers' Data
  1.10 Safety
  1.11 Maintenance
  1.12 Design considerations
  1.13 Estimating
  1.14 Contracts
  1.15 Access and loading
  1.16 Contractor performance
  1.17 Environmental considerations
  1.18 Technical files
  1.19 Electronic systems
  1.20 Programmable logic controller
  1.21 Bibliography
Chapter 2 - System planning
  2.1 Introduction
  2.2 Definitions
  2.3 Basic design considerations
  2.4 Planning guide for the supply and distribution
        system
  2.5 Power system modernization and evaluation
        studies/programs
  2.6 References
  2.7 Bibliography
Chapter 3 - Voltage considerations
  3.1 General
  3.2 Voltage control in electric power systems
  3.3 Voltage selection
  3.4 Voltage ratings for low-voltage utilization
        equipment
  3.5 Effect of voltage variations on low-voltage
        and medium-voltage utilization equipment
  3.6 Voltage drop considerations in locating the
        low-voltage secondary distribution system
        power source
  3.7 Improvement of voltage conditions
  3.8 Phase-voltage unbalance in three-phase systems
  3.9 Voltage sags and flicker
  3.10 Harmonics
  3.11 Calculation of voltage drops
  3.12 References
  3.13 Bibliography
Chapter 4 - Short-circuit current calculations
  4.1 Introduction
  4.2 Sources of fault current
  4.3 Fundamentals of short-circuit current calculations
  4.4 Restraints of simplified calculations
  4.5 Detailed procedure
  4.6 Example of short-circuit current calculation for
        a power system with several voltage levels
  4.7 Example of short-circuit current calculation for
        a low-voltage system (under 1000 V)
  4.8 Calculation of short-circuit currents for dc
        systems
  4.9 References
  4.10 Bibliography
Annex 4A - Typical impedance data for short-circuit
           studies
Chapter 5 - Application and coordination of protective
            devices
  5.1 Purpose
  5.2 Analysis of system behaviour and protection needs
  5.3 Protective devices and their applications
  5.4 Performance limitations
  5.5 Principles of protective relay application [38],
        [40], [50]
  5.6 Protection requirements
  5.7 Use and interpretation of time-current
        coordination curves
  5.8 Specific examples - applying the fundamentals
  5.9 Acceptance testing (commissioning), maintenance,
        and field testing
  5.10 Bibliography
Chapter 6 - Surge voltage protection
  6.1 Nature of the problem
  6.2 Travelling-wave behaviour
  6.3 Insulation voltage withstand characteristics
  6.4 Arrester characteristics and ratings
  6.5 Arrester selection
  6.6 Selection of arrester class
  6.7 Application concepts
  6.8 References
  6.9 Bibliography
Chapter 7 - Grounding
  7.1 Introduction
  7.2 System grounding
  7.3 Equipment grounding
  7.4 Static and lightning protection grounding
  7.5 Connection to earth
  7.6 Ground resistance measurement
  7.7 References
  7.8 Bibliography
Chapter 8 - Power factor and related considerations
  8.1 General scope
  8.2 Current and power flow fundamentals
  8.3 Benefits of power-factor improvement
  8.4 Typical plant power factor
  8.5 Instruments and measurements for power-factor
        studies
  8.6 Techniques to improve the power factor
  8.7 Calculation methods for improving power factor
  8.8 Location of reactive power supply
  8.9 Capacitors with induction motors
  8.10 Capacitor standards and operating characteristics
  8.11 Controls for switched capacitors
  8.12 Transients and capacitor switching
  8.13 Protection of capacitors and capacitor banks
  8.14 Resonance and harmonics
  8.15 Inspection and field testing of power capacitors
  8.16 References
  8.17 Bibliography
Chapter 9 - Harmonics in power systems
  9.1 Introduction
  9.2 Importance of understanding effects of harmonics
  9.3 History of harmonic problems and solutions
  9.4 Definition and sources of harmonic currents and
        voltages
  9.5 Characteristics of harmonics
  9.6 Static power converter theory
  9.7 System response characteristics
  9.8 Effects of harmonics
  9.9 Harmonic analysis
  9.10 Mitigation techniques
  9.11 Industry standards
  9.12 Bibliography
Chapter 10 - Power switching, transformation, and motor
             control apparatus
 10.1 Introduction
 10.2 Switching apparatus for power circuits
 10.3 Switchgear
 10.4 Transformers
 10.5 Unit substations
 10.6 Motor control equipment
 10.7 Adjustable speed drives
 10.8 Bibliography
Chapter 11 - Instruments and meters
 11.1 Introduction
 11.2 Basic objectives
 11.3 Switchboard and panel instruments
 11.4 Portable instruments
 11.5 Recording instruments
 11.6 Miscellaneous instruments
 11.7 Meters
 11.8 Auxiliary devices
 11.9 Typical installations
 11.10 Bibliography
Chapter 12 - Cable systems
 12.1 Introduction
 12.2 Cable construction
 12.3 Cable outer finishes
 12.4 Cable ratings
 12.5 Installation
 12.6 Connectors
 12.7 Terminations
 12.8 Splicing devices and techniques
 12.9 Grounding of cable systems
 12.10 Protection from transient overvoltage
 12.11 Testing
 12.12 Locating cable faults
 12.13 Cable specification
 12.14 References
 12.15 Bibliography
Chapter 13 - Busways
 13.1 Origin
 13.2 Busway construction
 13.3 Feeder busway
 13.4 Plug-in busway
 13.5 Lighting busway
 13.6 Trolley busway
 13.7 Standards
 13.8 Selection and application of busways
 13.9 Layout
 13.10 Installation
 13.11 Field testing
 13.12 Busways over 600 V (metal-enclosed bus)
 13.13 References
Chapter 14 - Electrical conservation through energy
             management
 14.1 Introduction
 14.2 Finding energy conservation opportunities
 14.3 The energy management process
 14.4 Calculating energy savings
 14.5 Load management
 14.6 Efficiencies of electrical equipment
 14.7 Metering
 14.8 Lighting
 14.9 Cogeneration
 14.10 Peak shaving
 14.11 Summary
 14.12 Bibliography
Chapter 15 - Industrial substations: plant-utility
             interface considerations
 15.1 Introduction
 15.2 Planning stage
 15.3 Design stage
 15.4 Construction stage
 15.5 Operating stage
 15.6 Bibliography
Chapter 16 - Cost estimating of industrial power systems
 16.1 Introduction
 16.2 Information required
 16.3 Factors to be considered
 16.4 Preparing the cost estimate
 16.5 Classes of estimates
 16.6 Equipment and material costs
 16.7 installation costs
 16.8 Other costs
 16.9 Example
 16.10 Bibliography
Annex 16A (informative) - Selected sources for cost-estimating
          information
Annex A (informative) - Power system device function
        numbers
INDEX

This publication provides a recommended practice for the electrical design of industrial facilities.

DocumentType
Standard
PublisherName
Institute of Electrical & Electronics Engineers
Status
Withdrawn
Supersedes

IEEE 902 : 1998 MAINTENANCE, OPERATION, AND SAFETY OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
16/30337938 DC : 0 BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEEE 741-2007 IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
IEEE 844-2000 IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels
IEEE DRAFT C37.95 : D6 99 DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS
FIPS PUB 94 : 0 GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS
IEEE DRAFT 1036 : D13A 2006 APPLICATION OF SHUNT POWER CAPACITORS
IEEE 3001.11-2017 IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems
IEEE 1242-1999 IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
IEEE 3004.8-2016 IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems
IEEE 3001.8-2013 IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems
IEEE DRAFT C37.48.1 : D13 2000 DRAFT GUIDE FOR THE OPERATION, CLASSIFICATION, APPLICATION AND COORDINATION OF CURRENT-LIMITING FUSES WITH RATED VOLTAGES 1-38 KV
IEEE 1234-2007 IEEE Guide for Fault Locating Techniques on Shielded Power Cable Systems
CSA C293.2 : 2017 STANDARD FOR SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - APPLICATION GUIDE FOR DESIGN, INSTALLATION, TESTING, COMMISSIONING, AND MAINTENANCE
IEC/ISO/IEEE 80005-1:2012 Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
IEEE DRAFT 1147 : D8 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
IEEE C37.96-2012 IEEE Guide for AC Motor Protection
IEEE C37.48.1-2002 IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV
IEEE 844.2/CSA C293.2-2017 IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and Maintenance
PIP ELCGL01 : 2013 ELECTRICAL DESIGN CRITERIA
UFC 3-550-07 : 2017 UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS
NFPA 70B:2023 Standard for Electrical Equipment Maintenance
TM 5-811-1 : V19950228 ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION
IEEE 3007.1 : 2010 RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE C37.302-2015 IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
NETA ATS : 2017 ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
IEEE 3004.5-2014 IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
IEEE C37.13-2015 REDLINE IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
NEMA PB 1:2011 Panelboards
NEMA ICS 18:2001 (R2007) INDUSTRIAL CONTROL AND SYSTEMS: MOTOR CONTROL CENTERS
NEMA ICS 3:2005 (R2010) INDUSTRIAL CONTROL AND SYSTEMS: MEDIUM VOLTAGE CONTROLLERS RATED 2001 TO 7200 VOLTS AC
NEMA PB 2:2011 Deadfront Distribution Switchboards
ANSI/NEMA AB 3:2013 Molded-Case Circuit Breakers and Their Application
IEEE 1531-2003 IEEE Guide for Application and Specification of Harmonic Filters
EEE 602 : 2007 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
PD IEC/PAS 80005-3:2014 Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements
IEEE C62.23-1995 IEEE Application Guide for Surge Protection of Electric Generating Plants
IEEE DRAFT 400.1 : D8 2006 FIELD TESTING OF LAMINATED DIELECTRIC, SHIELDED POWER CABLE SYSTEMS RATED 5 KV AND ABOVE WITH HIGH DIRECT CURRENT VOLTAGE
CSA C22.2 No. 273 : 2014(R2019) CABLEBUS
IEEE DRAFT 1242 : D4 99 DRAFT GUIDE FOR SPECIFYING AND SELECTING POWER, CONTROL AND SPECIAL PURPOSE CABLE FOR PETROLEUM AND CHEMICAL PLANTS
CSA C22.2 No. 293.1 : 2017 SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - GENERAL, TESTING, MARKING, AND DOCUMENTATION REQUIREMENTS
IEEE 1709-2010 IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships
IEEE 1159-2009 IEEE Recommended Practice for Monitoring Electric Power Quality
IEC TR 62655:2013 Tutorial and application guide for high-voltage fuses
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
IEEE 1458-2005 IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE 1547.2 : 2008 APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS
IEEE 3001.5-2013 IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
IEEE 45.8-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems
IEEE 1818-2017 IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations
IEEE C62.72-2007 IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
IEEE 3001.2-2017 IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems
IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
BS ISO/IEC/IEEE 80005-1:2012 Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements
PD IEC/TR 62655:2013 Tutorial and application guide for high-voltage fuses
IEEE DRAFT 551 : D5 2005 CALCULATING AC SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE C37.13.1-2006 IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
IEEE C37.121-2012 GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
IEEE C37.230-2007 IEEE Guide for Protective Relay Applications to Distribution Lines
IEEE 463-2013 REDLINE IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
IEEE 3006.2-2016 IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems
IEEE 1792-2011 IEEE Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1147-2005 IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
IEEE 1036-2010 IEEE Guide for the Application of Shunt Power Capacitors
IEEE C37.27-2008 REDLINE IEEE Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately-Mounted Current-Limiting Fuses
IEEE DRAFT 741 : D1 2006 CRITERIA FOR THE PROTECTION OF CLASS 1E POWER SYSTEMS AND EQUIPMENT IN NUCLEAR POWER GENERATING STATIONS
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
IEC PAS 80005-3:2014 Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
IEEE C37.95-2014 IEEE Guide for Protective Relaying of Utility-Consumer Interconnections
IEEE C37.121-2012 REDLINE IEEE Guide for Switchgear - Unit Substation - Requirements
IEEE 1349-2011 REDLINE IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations
IEEE 1584.1-2013 IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM)
IEEE 551 : 2006 CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1453-2015 REDLINE IEEE Recommended Practice for the Analysis of Fluctuating Installations on Power Systems
IEEE 1623-2004 IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
IEEE 2030.2-2015 IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE/CSA 844.1/CSA C22.2 No.293.1-2017 IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
IEEE C37.21-2005 IEEE Standard for Control Switchboards
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE 1143-2012 IEEE Guide on Shielding Practice for Low Voltage Cables

NEMA HP 100.4 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ECTFE FLUOROPOLYMERS
IEEE C37.91-2008 REDLINE IEEE Guide for Protecting Power Transformers
IEEE 519-2014 REDLINE IEEE Recommended Practice and Requirements for Harmonic Control in Electric Power Systems
IEEE C57.12.51-2008 REQUIREMENTS FOR SEALED DRY-TYPE POWER TRANSFORMERS, 501 KVA AND LARGER, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 208Y/120 TO 4160 VOLTS
NEMA TR1 : 2013 TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS
IEEE C37.20 : 69(R1981) SWITCH GEAR ASSEMBLIES AND METAL-ENCLOSED BUS
IEEE C57.12.10-2010 TRANSFORMERS - 230 KV AND BELOW 833/958 THROUGH 8333/10 417 KVA, SINGLE-PHASE, AND 750/862 THROUGH 60 000/80 000/100 000 KVA, THREE-PHASE WITHOUT LOAD TAP CHANGING; AND 3750/4687 THROUGH 60 000/80 000/100 000 KVA WITH LOAD TAP CHANGING - SAFETY REQUIREMENT
IEEE C37.14-2015 REDLINE IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures
IEEE C37.90-2005 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE 1127-2013 REDLINE IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility
IEEE C37.46-2010 FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES
IEEE C37.16-2009 LOW-VOLTAGE POWER CIRCUIT BREAKERS AND AC POWER CIRCUIT PROTECTORS - PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS
IEEE C57.12.59-2015 IEEE Guide for Dry-Type Transformer Through-Fault Current Duration
IEEE 525-2007 IEEE Guide for the Design and Installation of Cable Systems in Substations
IEEE 979-2012 IEEE Guide for Substation Fire Protection
NEMA BU 1.1:2010 General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less
IEEE C37.95-2014 IEEE Guide for Protective Relaying of Utility-Consumer Interconnections
CSA Z99 : 1975 GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS
NEMA SG 3 : 1995 LOW-VOLTAGE POWER CIRCUIT BREAKERS
IEEE C62.41-1991 IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits
NEMA MG 1 : 2016 MOTORS AND GENERATORS
NEMA MG 2:2014 Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators
IEEE 487-2015 IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations
IEEE C57.12.01-2015 REDLINE IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
UL 1072:4ED 2006-06 Medium-Voltage Power Cables
IEEE C57.12.20-2011 TRANSFORMERS - STANDARD FOR OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34500 VOLTS AND BELOW: LOW VOLTAGE, 7970/13800Y VOLTS AND BELOW
NFPA 110 : 2016 EMERGENCY AND STANDBY POWER SYSTEMS
IEEE C37.42-2009 SWITCHGEAR DISTRIBUTION CUTOUTS AND FUSE LINKS SPECIFICATIONS
IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
ANSI C57.12.24 : 2009 TRANSFORMERS - UNDERGROUND-TYPE THREE-PHASE DISTRIBUTION TRANSFORMERS, 2500 KVA AND SMALLER; HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 480 VOLTS AND BELOW - REQUIREMENTS
IEEE 386-2016 REDLINE IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV
ANSI C57.12.25 : 1990 TRANSFORMERS - PAD-MOUNTED, COMPARTMENTAL-TYPE, SELF-COOLED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS WITH SEPARABLE INSULATED HIGH-VOLTAGE CONNECTORS; HIGH VOLTAGE, 34 500 GRDY/19 920 VOLTS AND BELOW; LOW VOLTAGE, 240/120 VOLTS; 167 KVA AND SMALLER - REQUIREMENTS
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
NEMA HP 100.2 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROPOLYMERS
ANSI C34.2 : 1968 SEMICONDUCTOR POWER RECTIFIERS, PRACTICES AND REQUIREMENTS FOR,
ANSI/NEMA FB 11-2000 PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS
ASHRAE 90.1 : 1999 ENERGY STANDARD FOR BUILDINGS EXCEPT LOW-RISE RESIDENTIAL BUILDINGS
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
IEEE 592-2007 REDLINE IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors
ANSI C50.10 : 1990 ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES
IEEE C57.12.58-1991 IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
IEEE C57.12.00-2015 IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
NEMA WC 55 : 1992(R1999) INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE
IEEE 493 : 2007 DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
WC 5-1992 THERMOPLASTIC-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
NEMA WC 57 : 2014 CONTROL, THERMOCOUPLE EXTENSION, AND INSTRUMENTATION CABLES
IEEE C57.96-2013 IEEE Guide for Loading Dry-Type Distribution and Power Transformers
WC 8:1988 ETHYLENE-PROPYLENE-RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
ANSI/NEMA PB 2.1:2013 General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
ICEA P 32 382 : 2007(R2018) SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES
IEEE C37.48-2005 IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
IEEE C57.12.90-2010 IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
ANSI C37.6 : 1971 SCHEDULE OF PREFERRED RATINGS FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS
NEMA HP 100.3 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH CROSS-LINKED (THERMOSET) POLYOLEFIN (XLPO)
IEEE 315 : 1975 GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS)
UL 857:13ED 2009-03 Busways
IEEE C37.99-2012 IEEE Guide for the Protection of Shunt Capacitor Banks
ASHRAE 90 : A80 ENERGY CONSERVATION IN NEW BUILDING DESIGN
ANSI C97.1 : 1972
ANSI C12.1 : 2014 ELECTRIC METERS - CODE FOR ELECTRICITY METERING
NEMA HP 100:1991(R2010) High-Temperature Instrumentation and Control Cables
IEEE C37.20.3-2013 REDLINE IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV)
ANSI C39.1 : 81(R1992) ELECTRICAL ANALOG INDICATING INSTRUMENTS, REQUIREMENTS FOR,
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE C37.35-1995 IEEE Guide for the Application, Installation, Operation, and Maintenance of High-Voltage Air Disconnecting and Interrupter Switches
IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
ANSI C57.12.52 : 2012 Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements
IEEE C37.13-2015 REDLINE IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
IEEE 80-2013 IEEE Guide for Safety in AC Substation Grounding
ANSI C57.12.13 : 1982 LIQUID-FILLED TRANSFORMERS USED IN UNIT INSTALLATIONS INCLUDING UNIT SUBSTATIONS, CONFORMANCE STANDARD FOR
ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
IEEE C37.40-2003 IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
IEEE C57.92-1981 IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Up to and Including 100 MVA with 55 C or 65 C Average Winding Rise
NEMA PB 2.2:2014 Application Guide for Ground-Fault Protective Devices for Equipment
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
IEEE C57.111 : 1989 GUIDE FOR ACCEPTANCE OF SILICONE INSULATING FLUID AND ITS MAINTENANCE IN TRANSFORMERS
IEEE 142 : 2007 GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE C57.109-1993 IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEEE C37.011-2011 REDLINE IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
IEEE C37.06-2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
WC 3-1992 RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
NEMA HP 100.1 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS
IEEE C37.012-2014 IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V
NEMA ICS 1 : 2000(R2015) INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS
IEEE C37.24-2003 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
NEMA AB 4:2017 Guidelines for Inspection and Preventive Maintenance of Molded-Case Circuit Breakers Used in Commercial and Industrial Applications
IEEE 404-2012 IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV
UL 13:4ED 2015-03 Power-Limited Circuit Cables
IEEE 980-2013 IEEE Guide for Containment and Control of Oil Spills in Substations
ANSI C92.1 : 1982 POWER SYSTEMS - INSULATION COORDINATION
IEEE C57.12.23-2009 IEEE Standard for Submersible Single-Phase Transformers: 167 kVA and Smaller; High Voltage 25 000 V and Below; Low Voltage 600 V and Below
ANSI C92.2 : 1987 POWER-SYSTEMS-ALTERNATING-CURRENT ELECTRICAL SYSTEMS AND EQUIPMENT OPERATING AT VOLTAGES ABOVE 230 KILOVOLTS NOMINAL-PREFERRED VOLTAGE RATING,
IEEE C57.12.91-2011 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
IEEE C57.21 : 2008 REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA
NEMA ICS 2:2008 Controllers, Contactors and Overload Relays Rated 600 V
NEMA ICS 2.3 : 1995(R2008) INDUSTRIAL CONTROL AND SYSTEMS: INSTRUCTIONS FOR THE HANDLING, INSTALLATION, OPERATION AND MAINTENANCE OF MOTOR CONTROL CENTERS
IEEE C57.94-1982 IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
IEEE C37.41-2008 REDLINE IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
IEEE C37.23-2003 IEEE Standard for Metal-Enclosed Bus
NEMA AB 1 Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures
IEEE 515-2011 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
IEEE 400-2012 REDLINE IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
IEEE C37.04-1999 IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
IEEE 575-2014 IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV
IEEE 18-2012 IEEE Standard for Shunt Power Capacitors
IEEE 693-2005 IEEE Recommended Practice for Seismic Design of Substations
NEMA PR 4 : 83(R1989) PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE
IEEE C37.96-2012 IEEE Guide for AC Motor Protection
IEEE C57.106-2006 IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
IEEE C57.110-2008 REDLINE IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE C37.47-2011 DISTRIBUTION FUSE DISCONNECTING SWITCHES, FUSE SUPPORTS, AND CURRENT LIMITING FUSES, SPECIFICATIONS FOR (INCLUDES SUPPLEMENT ANSI C37.47A 1983),
NEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999) AMPACITIES INCLUDING EFFECT OF SHIELD LOSSES FOR SINGLE-CONDUCTOR SOLID-DIELECTRIC POWER CABLE, 15 KV THROUGH 69 KV (COPPER AND ALUMINUM CONDUCTORS)
WC 7-1988 CROSS-LINKED-THERMOSETTING-POLYETHYLENE-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
IEEE C50.13-2014 IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.